we are using SSRS 2012.Oracle 9i as back end database. Select A,B,C from view where A in (Param1) in above query when I am passing 1 value getting output in 30 sec. when I passed two values getting time out error in SSRS. how to pass multiple values in Oracle 9i in SSRS report.
View 4 RepliesI am trying to test the concept of passing multi value parameters from one report using the Action Property of a textbox to open another report is a new Window with the Multi Value parameter values already passed. The test involves the following:
Report 1:
1. Multi Value Parameter @ReportParameter1 has three Values: Value1, Value2, Value3
2. Has a text box with the Action Property set to Go to URL with the following Expression:
="javascript:void(window.open('http://reportserver/Reports/Pages/Report.aspx?ItemPath=%2fReports%2fReport2&rs:Command=Render&ReportParameter1="
+ JOIN(Parameters!ReportParameter1.Value,"&ReportParameter1=") + "'))"
Report 2:
1. Has Two Parameters @ReportParameter1 and @ReportParameter2
2. @ReportParameter1 has Available Values as follows: Value1, Value2, Value3
Does not have any default Values.
When I click on the textbox on Report1, it does navigate to Report2 but none of the Values are being set.
Table : incident
----------------
incident_id usr_id item_id Inc_Date
10059926 191 61006 8-22-2015
10054444 222 3232 6-7-2015
Table: act_reg
--------------
act_reg_id act_type_id incident_id usr_id act_type_sc
454244 1 10059926 191 ASSIGN
471938 115 10059926 191 TRAVEL TIME
473379 40 10059926 191 FOLLOW UP
477652 115 10059926 191 TRAVEL TIME
489091 504 10059926 191 ADD_ATTCHMNTS
477653 504 10054444 222 ADD_ATTCHMNTSParameter: @attach (value=1, Label=Yes & Value=0, Label=No)
Result (While I am selecting 'Yes' in dropdown)
----------------------------------------------
incident_id usr_id item_id
10059926 191 61006
10054444 222 3232
SELECT incident.incident_id,incident.usr_id,incident.item_id
FROM incident
where exists (How i can write query here to check the act_type_sc=ADD_ATTCHMNTS is exists)
Can we Pass table valued parameters and normal params like integer,varchar etc..to a single stored procedure?
View 1 Replies View RelatedI am creating a SSRS report using a SSAS cube as it data source. The user would like to select multiple values from a reporting parameter that is then used as a filter on the MDX statement. I am bale to have the report work successfully when only one value is selected but not when multiple values are selected; the report uses only the first value from the reporting parameter when it contains multiple values. How do I filter an MDX query using a SSRS report parameter with multiple values?
View 3 Replies View RelatedI have report where i should create a report which is multivalued parametr report,but here my condition is i want to see only one county name in my output that is Ex: Asia Specific (CountryName),I dnt want to see the other Country names,So how should we create for this condition .
View 5 Replies View RelatedI have two report , first is main report which is matrix and have one parameter User_ids which is multi value selection and my second report is basic chart of user_wise performance.
Now, my main report (matrix ) works fine for Multiple selection of users and i have putted one textbox on main report chart which has action properties set for chart report, when user click on chart button it must goes to chart with user selected in main report. Now , i have used expression for parameter to send it like ..
=join(parameter!user_id!value,",") which pass selected value to chart
And when I am selecting single user it passing that value to chart parameter list but , when it is more than one user it errors with conversion failed when converting the nvarchar value '121,128' to data type int. But my chart also works when passing 121,128 in user parameter in preview of report .
Using SQL Server 2008R2 and Report Builder 3.0..I have an action set in a text box of a table. My intent is to pass the value of that text box (which is variable) to a sub-report in a popup window. Here's my code: URL....The parameter of the report I'm trying to open is @SONum.I'm guessing my error is involved in the formatting of how the value of the parameter is being passed. I've also seen examples where the report server and report values were parameterized, but I don't know where to define
Parameters!ServerAddress.Value anywhere.Do I need to have something set up a certain way within the report I'm opening? Here's the report Parameter settings on the report I'm trying to open.
public Sub Main()
Dim url, destination As String
destination = Dts.Variables("report_destination").Value.ToString + "" + "Report_" + Format(Now, "yyyyMMdd") + ".xls"
url = "http://localhost/ReportServer?/ssis_resport_execution/ssis_ssrs_report&rs:Command=Render&ProductID=" + Dts.Variables("ProductID").Value.ToString + "&user_id" + Dts.Variables("user_id").Value.ToString
+ "&rs:Format=EXCEL"
SaveFile(url, destination)
Dts.TaskResult = ScriptResults.Success
End Sub
How to pass more than one variable values in ssis as parameter values to ssrs. With the above code its showing as empty.If i am taking single variable i am able to render the data into excel sheet.
I am trying to run the report by passing the parameters using url.
[URL]
I get the error when I add the "Year" parameter in the above url, after adding this I get error "The full path must be less than 260 characters long; other restrictions apply. If the report server is in native mode, the path must start with slash. (rsInvalidItemPath)
[URL]
I am using 2 charts in my SSRS Report. Requirement is to load the Right side chart based on the click event from left chart.
I can achieve it using go to report option. But the issue is total page getting refreshed while using this option. I feel bookmark option will be the best. But I don't think I can pass a value to Bookmarks.
I am working on existing ssrs report. When I see the preview I could see the extra parameter than the actual parameter.
How do I know , when this parameter is coming in the preview ?
I am trying to pass more then one parameter from URL , Below is my URL
="javascript:void(window.showModalDialog('http://in-mh-co-dt0030/ReportServer_SQLSERVER2012TAB/Pages/ReportViewer.aspx?%2fTest%2fProduct_WiseV1.0&rs:Command=Render&Lob="+Fields!Line_of_Business.Value+"&Year="+Sum(Fields!Year_list.Value,
"Year_Param_DS")+"', ''))"
Lob parameter is in the same dataset , But Year parameter is from different Dataset(Year_Param_DS).But If I am passing second parameter (Year) like Sum(Fields!Year_list.Value, "Year_Param_DS") i am not able to open the popup.
If i am removing the sum word Main report is giving an error that "Report item expressions can only refer to fields within the current dataset scope or, if inside an aggregate, the specified dataset scope."e syntax (I am working using MDX query) to pass two parameter through url, one from same dataset and 2nd is from another dataset.Or it is not possible to pass the value field from other Dataset in URL (Go to URL option).
I have a Report that I want to access that has a parameter input for the date, Production_Date. I want to allow the user to use the DateTimePicker to select the date to use for Production_Date. I can't seem to find the correct way to format what I'm tring to do. My production date field is in a format without punctuation so that it becomes:
Dim ProductionDate = ((DateTimePicker1.Value.Month * 1000000) + (DateTimePicker1.Value.Day * 10000) + DateTimePicker1.Value.Year)
which gives me a value that I want to send as a parameter for the Reporting Services report that I have located on a tab in my project. The report is:
Me.ReportViewer1
I want to send the ProductionDate to the report where the report looks for Production_Date. Obviously, I 'm very new to this. I'd appreciate any suggestions. As it runs now, the default date is loaded (today's date) from the expression I calculated in Reporting services:
=(Now.Month*1000000)+(Now.Day*10000)+Now.Year
This is a big roadblock right now and I can't seem to put together a legal means to pass this value. Thanks for any help.
Hello,
I am forced to use a Sp in teh first place as my query is too long for the text dataset. I have a parameter Time_Period which ia a multivalued one but it is not allowing me to use this in the SP. using RS 2005.
Any help appereciated.
Thanks
I'll go to a dataset, open up the query designer, add a new parameter, then refresh the fields, but the parameter won't be added as a report parameter. If I go to the dataset properties under the list of parameters, the value in the dropdown will be blank. However, sometimes this will automatically add.
Is this a bug in Visual Studio? How do I get around this?
Is it possible to pass a report parameter that is defined as a string to the following SQL statement that is using an "IN" clause ?
WHERE (ANALYST.User_Bemsid IN (@Report_Parameter_Bemsid))
If I pass a single value (I.E. A) it works okay, but once I try to pass multiple values (I.E. A,B or 'A','B') it returns no data.
Using Crystal reports I can pass multiple values via a report prompt into the SQL "IN" clause and seems that SQL Reporting Services should also have this feature. What do I need to do to get it working ?
Thanks for any help...
Hi,
There is a .net application which has a screen with four options(text boxes)
Each of these should take to reports generated by SQL REp Services
This is the requirment
The School selected in the App should be passed on to the report
How should I pass the parameter in my report
so that when user selects a link or text box report for that particular school number is displayed
Thanks
sowree
Hello,
I'm trying to rertieve specific RS 2005 report by passing WebApp control value (this.VCtrlNo.Text) to "CV Report" - name of my report with the following scripts.
1) No Action - when clicked. AutoPostBack is set and properly initialized.
Page.Response.Write("<script>window.open('http://localhost/Reports/Pages/Reports.aspx? /Reports+Folder/CV+Report&vctrlno=" + this.VCtrlNo.Text + "','_blank');return false; </script>");
2) This just opened the default page instead of specific report.
<a href="http://localhost/Reports/Pages/Report.aspx?ItemPath=%2fReports+Folder%2fCV+Report&rc=Render&vctrlno=10-0000037", target="_blank">Open CV Report
</a>
Where "Reports" is the reportmanager, vctrlno is the parameter name (properly set) and obviously I want to open a new page.
I would be very thankful to anyone who can lead to make this work.
Thanks
Jj
I have a multi-valued parameter that I want to pass to a subreport. The values are 11, 12, 13, and 14.
So here's what I've done:
1. For the properties of the clickable field of the first report, I have gone to the Navigation tab and chosen the subreport in the "jump to report" pulldown.
2. Then I clicked on the Parameters button and added a parameter name for the multi-valued parameter I am trying to send. For the Parameter value, I have tried 11,12,13,14. I have also tried =Split(11,12,13,14)
3. On the subreport, I create a report parameter with the same name, data type is string, multi-value is checked, and the available values pulldown is populated by a query.
So I run the first report and click on the link that brings me to the subreport, but all the subreport shows is the results for 11, not 12, 13, and 14.
How can I get the second report to understand that I want it to show all the records related to 11, 12, 13, and 14? If I bypass the first report and simply use the drop-down to choose 11, 12, 13, and 14 in the subreport, it works fine. I just can't seem to figure out how to correctly have the first report tell the subreport that it wants 11, 12, 13, and 14.
Thanks in advance for any advice!
Dan
I am building a webapp that calls an SSRS instance to display a report based on another servers web service.I can make a call from the ssrs server using this in the RDL:
<Query>
<Method Namespace="http://machine/webservices" Name="HelloUser">
<Parameters>
<Parameter Name="user">
<DefaultValue>Craig</DefaultValue>
</Parameter>
</Parameters>
</Method>
<ElementPath IgnoreNamespaces="true">*</ElementPath>
</Query>
This works no problem. but.. I want to have the user parameter "Craig" be a parameter passed in from the web app. If it were a regular SQL data source you would put @user in the query. How do you do it with XML text queries?
I have two reports 'Product Details' and 'Sales by Product'
When i click on 'Product ID' field in 'Product Details' report, It has to drill through to 'Sales by Product' which has a parameter 'Product ID' in it.
I have written the following javascript
="javascript:void(window.open('http://servername/Rportserver/Pages/Report.aspx?ItemPath=%2fTestDrillThru%2fSales+By+Product&rs:Command=Render&ChildProductID="& Fields!ProductID.Value &"','_blank',',resizable=1,width=1600,height=800,left=50'))"
When i drill through, field value is not passing to 'child product id' in sales by product. I have to give the value again in child report.
I have a report that prompts the user to select a parameter, for simplicity, let's say the parameter is for color choice, options are Red, Yellow, Blue or *. The * is for include all colors. I am passing that parameter back to the dataset query which, again for simplicity is
select
Hue from AvailableColors
whereColor
= @ColorParam.
For a specific color this works fine, for the "*" selection it returns a null. It would seem that I need to convert the * to % but I am not sure how.....
Hi,
I tried to pass parameter from one report to another report. I can send the parameter using following option:
I used jump to url option and write the following expression:
="javascript:void(window.open('http://hpsi-dev/Reports/Pages/Report.aspx?ItemPath=%2fNextGen+Reports%2fMAUA%2fSales+Order+Detail&rs:Command=Render&SalesOrderNumber="+Fields!SalesOrderNumber.Value+"'))"
and it shows me the following in browser url
http://hpsi-dev/Reports/Pages/Report.aspx?ItemPath=/NextGen+Reports/MAUA/Sales+Order+Detail&rs:Command=Render&SalesOrderNumber=SO43667
now the problem is how to get this ordernumber in my report any option ???pls urgent...any javascript function to take this no into my another report
I have a sp where query is as below.
DECLARE @ServerCIName varchar(5000)
SELECT * FROM dbo.INC
WHERE Status in ('Assigned','In Progress','Pending')
and Description like '%' + (Select * from SplitDelimiterString(@ServerName,',')) + '%'
and (select DATEADD(dd, DATEDIFF(dd, 0, (Submit_Date)), 0)) = (select DATEADD(dd, DATEDIFF(dd, 0, getdate()), 0))
In place of "and Description like '%' + (Select * from SplitDelimiterString(@ServerName,',')) + '%' ", if I use "and Description like '%' + @ServerName + '%' " and pass a single value, it works.
But @ServerName contains multiple values and it is dynamic (not constant).
How do I query the data?
Currently i am setting up a report. The data source comes from pre-defined custom datasets where i've pre-entered the parameters for both Month and Year.
I already have one table up and working, but now i need a new table below it with a % column for each month so it gives visibility for the trend in recent months. As the interactive parameters are already in place; when i try to create the table it comes through with the specific month that the parameters are set too, and change when the parameters are altered.Is there a way to ignore the parameters for this table; or get around it?
In an existing ssrs 2012 report, I want to basically add the following logic to a new dataset that will be used by a new parameter called 'Inventory'.
SELECT DISTINCT Inv_number as value, Inv_name as label
FROM s.dbo.fnUser( @endYear, 0, 0, 0)
WHERE (@report is not null)
order by label,value
In this ssrs report, there are 15 reports that can automatically be generated. I basically want this new parameter called 'Inventory' to only be active when the 4th report is selected to be generated. Thus in the query I listed above, how can I change the query to only be active when the 4th report is selected?
I tried to change the where clause to (@report(4) is not null), but that did not work.
I have created ssrs report which has a parameter for start date. I want another parameter which shows time-frame of 6months,12 months,18 months,24 months which calculate dynamically from my start date
select distinct [dbo].[MSP_EpmResource_UserView].[ResourceName], [dbo].[MSP_EpmProject_UserView].[ProjectUID],[dbo].[MSP_EpmProject_UserView].[ProjectManagerName] ,
[dbo].[MSP_EpmTask_UserView].[TaskStartDate],[dbo].[MSP_EpmTask_UserView].[TaskFinishDate],
[dbo].[MSP_EpmTask_UserView].[TaskPercentCompleted],[dbo].[MSP_EpmProject_UserView].[Project Status] AS StatusForExecutiveReporting,
[Code] ....
In my report I have two parameters PID and patientName, but user want to enter either PID or patientName. When I preview the report user can only enter one parameter not both. Is there any way to create two parameter available but users can enter only one parameter value?Here is my report layout and query I used for that report. These two parameters comes from one column 'String_NVC' as from query and column name 'Description' as from the report layout.
SELECT Username_NVC AS Username,
String_NVC,
Time_DT AS UserActionDateandTime,
FROM test
[code]...
I created a parameter with available values from a dataset.
By default i want it to display the maximum value. and then the user can select the dates if he does not like the default value.
How to i do this. because when i tried to set the paramter default value to max(dataset!dt.value) it says expression canot be used.
How to do this. Should I create a dataset with maximum value and then assign it to this one.
I am working on SSRS 2008 R2 in BIDS. The report's data source is from Stored Procedure which is running good in SQL Server 2008 R2.
The stored procedure has an output parameter, which I don't know how to set in BIDS, so when I try to add the data source to the report, a mistake is shown up.
So my problem is:
1. How to set the output parameter correctly, so the data source(stored procedure) can be run as good as it were in SQL Server 2008 R2.
2. How to get the output parameter value in BIDS which will be used to set the title of table dynamically.
How to call Boolean/Text parameter in SSRS Query.
Parameter (Cust )Properties:
My Query:
SELECT dbo.incident.incident_ref, Customer.cust_n,incident.date_logged FROM
incident INNER JOIN Customer ON incident.incident_id = Customer.cust_id
WHERE incident.date_logged BETWEEN @date_from AND DATEADD(day, 1, @date_to)
I need to use a condition here to display customer based on my selection in dropdown list (Include ABC )
I have a ssrs report with Name, phone ,state and city as columns. I have check box as one of my parameter(optional). If user checks that checkbox then it should group by state, if checkbox is left blank no need to do any grouping. How can i do this in ssrs 2012.
View 3 Replies View Related