I want a ssrs report with two tables adjacent,using same data set. I want to start row number/records in second table where rownumber of first table ends.and in second page first table should start where second table of first page ends.
View 10 RepliesI have to display the data in the below said formats..Current sample Data in the table and the data type is numeric(23,10)
50.00
0.50
0.00
0.00
To be displayed in the below format
1.25
0.75
0
0
1
I have to map this column in teh report and should dipslay like above.I think if 0.00 is available then it should display as 0..If 1.0 is available then it should display 1.Any value that has postive number after the decimal should display all the values  example : 2.25,3.75,5.06, So in general the solution to display values like 1.75,1,0 we should not dispaly 0 as 0.00 and 1 as 1.00 and 2 as 2.00 and so on...Any Solutions in terms of SQL query  or SSRS expression.
I have doubt In ssrs while doing report like If We have Amount Column In a Table, then I want to display amount in letters Format.
Ex: 5000 /- Now I want to display Amount As Five Thousand Rupees Only.
Need to display current time in below format:
06/01/2015 at 7:00 a PST
(Date at time TimeZone)
I would like to display a portion of report where there is data or no data
There is data subreport  display  Â
   Product Name Latex Gloves Â
   Product ID   Â
xxxx5678
 There NO data in the subReport
Â
  Product Name             Â
  Product ID  Â
I have a database that yield 50 different reason codes
=Fields!Reasons_Type.Value
Each reasons code yields a total
i.e.
Appeal 4
Loss 5
Won 0
How can I display all 50 rows of data regardless if there is a total value.
My stored procedure give me top 3 activities. My SSRS report design, I am able to display first activity when I select the Activity field from the Stored procedure, how to display 3 activities for each category.. Also I need a solution to sort the categories based on the requirement below.
View 2 Replies View Relatedi hav four cells that display
startdate       | %completed|   taskname    | indicator
[startdate value]|[%completed]|[taskname value]|[indicatorfield value]
task name and indicator are grouped by years and months
i want all these in a single cell with a separator.
I am new to ssrs super scripts. I want to display superscript as B with bold & red colour for one column data
o/p:
Name:
America B
India B
UAE B
Here B is super script & red color....
how can i dynamically specify the name of a report before sending in an email (example @reportName@datetime@parameter1@ServerName)
I have read most of the related articles and i am still curious about this topic - the technology is there so why wouldn't microsoft just add a REPORTNAME field to the email data driven subscription?
I have created SSRS report which has many overlapping objects, the output in PDF format seems to good but in word format it is not giving the required output.
View 5 Replies View RelatedI am using VS 2010 and the SSRS that came with it. I am sure its SSRS 2008. Anyway, I added a report file to the project, added an ObjectDataSource and connected this to SQLServer 2008, and display the dataset on the report. The report is using ScriptManager, ReportViewer1, and Report1.rdlc file. I preview the dataset and I have multiple row returned. The problem is I only have one row displayed on the report. Maybe I did a quick and dirty report? What setting of properties did I missed?
View 8 Replies View Related
I have a file directory of tiff images that I need to display dynamically with reporting services. I receive the following error message: "The value of the MIMEType property for the image €˜image1€™ is €œimage/tiff€?, which is not a valid MIMEType." After looking it up sure enough tiff is not a valide type. Does anyone know of a way to display tiff images in reporting services.
Thanks,
Ross
I have Successfully deployed the report in Report Server.
And i also successfully called it from Web application using VS 2005.
But the problem is,I am able to view only half of the report in Web Browser.It was Shrinked to Left side of the browser.
I am getting total report when i browse from Report Server URL directly.
Any body pls help me to solve this.
Dear FriendsI need to get the data in the required format. Please help----------------------Table TripSheet----------------------Id,TSNo.,JourneyDate(ddmmyy),CustName,RateType,VehicleNo., BillId, journey hours, journey kmDATA
1, 234, 1-1-2007, Samson Pvt.Ltd, BPORates, Vehi45, 234, 2 hrs, 60 KM2, 235, 2-1-2007, Samson Pvt.Ltd, BPORates, Vehi45, 234, 3 hrs, 30 KM3, 236, 3-1-2007, Samson Pvt.Ltd, BPORates, Vehi45, 234, 2 hrs, 60 KM4, 237, 4-1-2007, Samson Pvt.Ltd, BPORates, Vehi45, 234, 4 hrs, 40 KM5, 238, 5-1-2007, Samson Pvt.Ltd, BPORates, Vehi45, 234, 2 hrs, 60 KM
6, 239, 1-1-2007, Samson Pvt.Ltd, BPORates, Vehi99, 234, 2 hrs, 60 KM7, 240, 2-1-2007, Samson Pvt.Ltd, BPORates, Vehi99, 234, 3 hrs, 30 KM8, 241, 3-1-2007, Samson Pvt.Ltd, BPORates, Vehi99, 234, 2 hrs, 60 KM9, 242, 4-1-2007, Samson Pvt.Ltd, BPORates, Vehi99, 234, 4 hrs, 40 KM10, 243,5-1-2007, Samson Pvt.Ltd, BPORates, Vehi99, 234, 2 hrs, 60 KM----------------------------Table BillTripSheet-----------------------------Id,BillId,VehicleNo., TotalJourneyHours,TotalJourneyKM,SlabApplied, MinAmt, ExtAmtDATA
1, 234, Vehi45, 13hrs, 250km, SlabA, 500, 502, 234, Vehi99, 13hrs, 250km, SlabA, 500, 50
I need to display data to be displayed in the following format in report(grouping based on vehicle no.)
1, 234, 1-1-2007, Samson Pvt.Ltd, BPORates, Vehi45, 234, 2 hrs, 60 KM2, 235, 2-1-2007, Samson Pvt.Ltd, BPORates, Vehi45, 234, 3 hrs, 30 KM3, 236, 3-1-2007, Samson Pvt.Ltd, BPORates, Vehi45, 234, 2 hrs, 60 KM4, 237, 4-1-2007, Samson Pvt.Ltd, BPORates, Vehi45, 234, 4 hrs, 40 KM5, 238, 5-1-2007, Samson Pvt.Ltd, BPORates, Vehi45, 234, 2 hrs, 60 KM----------------------------------------------------------------------------------------------------------1, 234, Vehi45, 13hrs, 250km, SlabA, 500, 50---------------------------------------------------------------------------------------------------------
6, 239, 1-1-2007, Samson Pvt.Ltd, BPORates, Vehi99, 234, 2 hrs, 60 KM7, 240, 2-1-2007, Samson Pvt.Ltd, BPORates, Vehi99, 234, 3 hrs, 30 KM8, 241, 3-1-2007, Samson Pvt.Ltd, BPORates, Vehi99, 234, 2 hrs, 60 KM9, 242, 4-1-2007, Samson Pvt.Ltd, BPORates, Vehi99, 234, 4 hrs, 40 KM10, 243,5-1-2007, Samson Pvt.Ltd, BPORates, Vehi99, 234, 2 hrs, 60 KM----------------------------------------------------------------------------------------------------------2, 234, Vehi99, 13hrs, 250km, SlabA, 500, 50----------------------------------------------------------------------------------------------------------
The Calculation logic is lengthly and the number of records involved is huge.also, only the manager has authority to generate the Bill and rest of the team can view the bill report
So i cannot do the calculations while fetching the records, Bill has to be generated and stored. How do i write the query to fetch the data from the two tables "TripSheet" and "BillTripSheet" ? Please Help
ReagardsSara
I have a report created in Business Intelligence Project.I want to trigger my report result. If it has no returned value, it creates error message displayed on the screen. How could I do this?
Any guidance please.
thanks
-Ron-
I have created a table and want to display a datset. One of the fields in the dataset is 'month' which I need displayed across the top of the report. The other information should make up the rows.
How do I get it to list the Month across the page rather than down?
Hi,
We have stored some chinese characters in SQL database with datatype as nvarchar, but they are displayed in RS as some weird characters.
like this: 耹±Ã¥€¢€ 耹±Ã§¾Å½Ã¨¸Ã¨€°Ã¥€¢€ Ã¥€¹„¢(耚¡)Ã¥€¦¬Ã¥¸Ã¥°Ã§£Ã¥Ë†€ Ã¥€¦¬Ã¥¸
When we code the asp pages, we put the following on each page to display the chinese characters properly.
<meta http-equiv="CONTENT-TYPE" content="TEXT/HTML; CHARSET=UTF-8">
So my question is what do I need to do in RS in order to show the chinese characters properly as well ?
Many thanks!
Hi all,
I have one problem to display report.
I have 6 fileds in my Dataset.I have to display 4 fileds in one row.
After that I have to display other 2 fields in next row.
Second row may have more than one record based on last field of the first Row.
How can i place my fields at the time of Design.
Example.
suppose x,y,z,p,s,t are fields
x y z p(1st row)
in this row values for x,y,z,p fileds
s t
xxxxxxxxxx xxxxxxxxx(2 records)
yyyyyyyyyy yyyyyyyyyy
x y z p
in this row values for x,y,z,p fileds
s t
xxxxxxxx xxxxxxxxxxx(1 Record)
x y z p
in this row values for x,y,z,p fileds
s t
xxxxxxxxxx xxxxxxxxx(3 Records)
yyyyyyyyyy yyyyyyyyyyy
zzzzzzzzzz zzzzzzzzzzz
How can i display this.
Thanks and Regards
Hi ,
How can I hide the URL information when I open a report, some with parameters and some do not have
parameters. Is there anyway or properties in RS that I can set to have it hide all the important information,
like datasource, credentials, parameters, and display the report like a aspx page instead?
Or does this need to have special programming to make this happen? and if so, what do I need to do?
thanks very much
Hi guys n gals !
I am having a few problems manipulating the results of my data reader,To gather the data I need my code is:
// database connection SqlConnection dbcon = new SqlConnection(ConfigurationManager.AppSettings["dbcon"]);
// sql statement to select latest news item and get the posters name SqlCommand rs = new SqlCommand("select * from tblnews as news left join tblmembers as members ON news.news_posted_by = members.member_idno order by news.news_idno desc", dbcon); // open connection dbcon.Open();
// execute SqlDataReader dr = rs.ExecuteReader();
// send the data to the repeater repeater_LatestNews.DataSource = dr; repeater_LatestNews.DataBind();
Then I am using: <%#DataBinder.Eval(Container.DataItem, "news_comments")%> in my repeater.What I need to do is pass the "news_comments" item to a function I created which will then write the result. The code for my function is:
// prevent html public string StripHtml(string data) { // grab the data string theData = data;
// replace < with &alt; theData = Regex.Replace(theData, "<", "<"); // return result return theData; }
But I am having problms in doing this,Can anyone point me in the right direction on what I should be doing ???
Hi,
I'm using SSRS to generate reports. i have many columns data to be displayed.while converting the data into Excel and PDF the data, header, and footer are not displaying proper format. what are all the properties to be set for that.
Could any one help in this regard.
Thanks for your help..
I have a doubt ,while doing report, I have month column, I have passed 11 in  month parameter, but I want to display month column as NOV not 11.Â
View 2 Replies View RelatedI have a table that contains some data.Â
LabelName
LabelValue
TotalForRetire
10337
dummy1
0
TotalForRelatives
5850
dummy2
0
TotalForDisability
7337
TotalForOrange
23
I have a pie chart and a bar chart.
In the pie chart I want to plot only TotalForRetire and TotalForDisability and TotalForOrange
In the bar chart I want to plot only TotalForRetire,dummy1,TotalForRelatives.
Also, here I want the horizontal axis not to show the label  for dummy1 as the value is 0. How can i do that for each chart?
I would like to display different addresses in the same list:
I have the query for married couples working, Also, I have a separate query of non-married people working.I would like to create a separate datasets for unmarried people in the same report.-Is there way to setup another the second data set without duplicating the fields from the first datasource. I tried to use alias on the second datasets and it did not work okay.
I have a cell in one of my reports that displays both a begin time and an end time. The problem is that the times are stored in military time and I need to display them in AM/PM format.
Currently I am doing the following:
CASE
WHEN DATEPART(HH, start_time) < 13 THEN RIGHT(CAST(100 + DATEPART(HH, start_time) AS CHAR(3)), 2)
ELSE CAST(DATEPART(HH, start_time) - 12 AS CHAR(2)) END + ':' + RIGHT(CAST(100 + DATEPART(MI, start_time) AS CHAR(3)), 2) +
CASE
WHEN DATEPART(HH, start_time) < 13 THEN ' AM' ELSE ' PM'
END
+ ' - ' +
CASE
WHEN DATEPART(HH, end_time) < 13 THEN RIGHT(CAST(100 + DATEPART(HH, end_time) AS CHAR(3)), 2)
ELSE CAST(DATEPART(HH, end_time) - 12 AS CHAR(2)) END + ':' + RIGHT(CAST(100 + DATEPART(MI, end_time) AS CHAR(3)), 2) +
CASE
WHEN DATEPART(HH, end_time) < 13 THEN ' AM' ELSE ' PM' END AS 'TIMES',
in order to present the two times in one cell in AM/PM format. While this works, I'm wondering if there is a way in Reporting Services layout mode to give a date or time format mode to a cell that will work for two times with a dash in between them, rather than simply for one time. Then I could pull the times in the format that they are stored on the database and use Reporting Services to format them. Does anyone have any suggestions?
I am new to SSRS. I created a reporting services with 3 groups. I would like to know how to create different colors for each group so that all my values displayed by color group ?.
View 4 Replies View RelatedUsing a single multi select parameter I want to show/hide 5 tablix's I have in my SSRS 2008 report. Inside the parameter  I want to give each tablix a value a have user control which tablix he wants to see. If user selects all 5 he should be able to see all 5 or if he selects only 4 then display only the 4 tablix's user selected or select's only 3 then display only 3 so on so forth.
How to configure the parameter and hidden expression of the tablix.
I am creating an RS with four parameters -
Parameter 1 = Date Period ex. 20081102
Parameter 2 = Start Date ex. 11/02/2008
Parameter 3 = End Date ex. 12/02/2008
Parameter 4 = Description ex. Period 20081102
For Parameter 2 and 3 it will have available values in a Date Range
ex. for Period 20081102 it will have a date range
for Parameter 2 = from 10/02/2008 - 12/02/2008
for Parameter 3 it will have from 11/02/2008 - 12/02/2008
The process flow goes like this:
1. I'll select value from parameter 1
2. Automatically parameter 2,3 and 4 should display corresponding values.
3. It works well on first try
4. if i'll try selecting another value for Parameter 1,
5. As expected it should display again the corresponding values for the 3 parameters but Parameter 2 is retaining the value for the previous Parameter.
Why is it happening?
Does it have something to do with the date range?
How does the sequencing for RS happens?
This scenario happens when date ranges for each Date Period have common values.
How to count the column group values and how to print the counts on every column for column group.
I used below expression to get the total column group count.
=CountDistinct(Fields!MMU.Value, "DataSet3")
In my report I am having one calculation filed, in that field I want to display only two values before decimal point.
For example, if I am having calculation field value as 3456.54, I need to display as 35.54 or 34.54.
We run std 2008 r2. Is there a way to default one particular report's display size to either "page width" or 200% instead of 100%?
View 7 Replies View RelatedIs it possible to hide the entire toggle line and the symbol but still shows the children? I must keep the children in this container.
Before:
After: