I get this error "Operand data type varchar is invalid for divide operator".
select V.[Parent Name],
[ID],
round((V.SoftValue/VTMValue)*100,0) 'SPercentage',
round((V.HMUValue/VTMValue)*100,0) 'HPercentage2',
round((V.PrimaryValue/VTMValue)*100,0) 'PPercentage2'
[code]...
I have even converted the values to float.
I am using the below query for calculation and I get this error.
Operand data type nvarchar is invalid for sum operator.
'$ '+ REVERSE(SUBSTRING(REVERSE(CONVERT(varchar,(CAST(round(isnull(sum(t7.[Pre Override Cost]),0),0) as money) + 1 -
cast(round(isnull(sum(t8.[Shared Dollars]),0),0)as money)),1)),4,255)) as [PreOverride L2],
'$ '+ REVERSE(SUBSTRING(REVERSE(CONVERT(varchar,(CAST(round(isnull(sum(t7.[Post Override Cost]),0),0) as money) -
cast(round(isnull(sum(t8.[Shared Dollars]),0),0)as money)),1)),4,255)) as [PostOverride L2]
I get this error when I attempt to read from a datareader using the following sql statement:
Dim mysql As String = "SELECT PayrollTrans.PayrollID, Employees.[EmpFirstName] & ' ' & " _
& " Employees.[emplastname] AS FullName, Employees.[City] & ', ' & Employees.[State] & ' ' & Employees.[zip] AS CityState " _
& " , PayrollTrans.Date, PayrollTrans.EmployeeID, PayrollTrans.RegHours, " _
& " PayrollTrans.OTHours , PayrollTrans.RegPay, PayrollTrans.OTPay, " _
& " PayrollTrans.FedTax, PayrollTrans.FICATax, PayrollTrans.MedicareTax, " _
& " PayrollTrans.ESCTax, PayrollTrans.StateTax, PayrollTrans.ESCEMPTax, " _
& " PayrollTrans.FUTATax, PayrollTrans.NetPay, Employees.EmployeeID, " _
& " Employees.Address1, Employees.Address2, Employees.SSAN, " _
& " Employees.PayType, Employees.RegPayRate, Employees.OTPayRate, " _
& " Employees.MaritalStatus, Employees.FedExemption, Employees.StateExemption, " _
& " Employees.Active, Employees.SelectforPay, Employees.PayDate " _
& " FROM PayrollTrans, Employees where PayrollTrans.EmployeeID = Employees.EmployeeID;"
my reader command list as follows:
Dim objCM As New SqlClient.SqlCommand(mysql, SqlConnection1)
Dim objDR As SqlClient.SqlDataReader
objDR = objCM.ExecuteReader
Any ideas on where I am going wrong?
Thanks in advance
I am getting a error message saying: Invalid operator for data type. Operator equals boolean AND, type equals datetime.
I traced the pointer to @gdo and @gd, they are both dates!
INSERT INTO AdminAlerts values (CURRENT_USER, 'UPDATE', getDate(), @biui, 'Updated booking, ID of booking updated: ' & @biui & ', Booking date and time before/after update: ' & @gdo & '/' & @gd & ', Room number before/after update: ' & @rno & '/' & @rn & ' and Customer ID before/after update: ' & @cio & '/' & @ci)
If I cut that two dates out it works fine.
Could someone tell me the syntax to include a date in a string :confused:
What is wrong with this select statement?
SELECT lastName + ", " + firstName + " " + middleName as Name
FROM [users]
WHERE ([usrID] = 100)
I kept getting this error:
Msg 403, Level 16, State 1, Line 1
Invalid operator for data type. Operator equals add, type equals text.
Help is appreciated.
What is wrong with this select statement:
SELECT lastName + ", " + firstname + " " + middleName + " " + maidenName as Name
FROM users
WHERE userID = 100;
I kept getting this error:
Msg 403, Level 16, State 1, Line 1
Invalid operator for data type. Operator equals add, type equals text.
Help is appreciated.
Kudos to y'all experts out there. I kinda needed your help. I'm trying to run a query...
SELECT a.AUF_POS AS Pos, c.ZL_STR AS Panel, a.POS_TEXT AS Description, a.BREITE AS W1, a.HOEHE
AS H1, a.BREITE2 AS W2, a.HOEHE2 AS H2, SUM(b.ANZ) AS Qty, SUM(b.LIEFER_ANZ) AS Dlvd,
SUM(b.RG_ANZ) AS Inv, (a.BREITE*a.HOEHE/CAST(1000000 AS NUMERIC)) AS UnitSQM,
(a.BREITE*a.HOEHE*SUM(b.ANZ)/CAST(1000000 AS NUMERIC)) as TotPosSQM
FROM liorder..LIORDER.AUF_POS a INNER JOIN liorder..LIORDER.AUF_STAT b ON a.AUF_NR = b.AUF_NR
AND a.AUF_POS = b.AUF_POS INNER JOIN liorder..LIORDER.AUF_TEXT c ON a.AUF_NR = c.AUF_NR AND
b.AUF_POS = c.AUF_POS
WHERE (c.ZL_MOD = 0) AND (b.AUF_NR = '86260')
GROUP BY a.AUF_POS, a.POS_TEXT, a.BREITE, a.BREITE2, a.HOEHE, a.HOEHE2, a.SFORM_NR, c.ZL_STR
...and I keep getting this error: Invalid operator for data type. Operator equals multiply, type equals nvarchar. I've tried every possible CAST and CONVERT but I just can't make it work. I'm pretty sure that the data types for the columns I mentioned on the mathematical equation are all numeric. Please help...
this is an error i am getting trying to run the query below.
Invalid operator for data type. Operator equals minus, type equals varchar
SELECT regardingobjectidname, actualend, owneridname, createdbyname, activitytypecodename
FROM (SELECT regardingobjectidname, actualend, Owneridname, createdbyname, activitytypecodename, row_number() OVER (Partition BY
regardingobjectid
ORDER BY actualend DESC) AS recid
FROM FilteredActivityPointer
WHERE statecodename = 'completed') AS d
WHERE recid = 1 AND (owneridname IN (@user)) AND (activitytypecodename = 'phone call' OR
activitytypecodename = 'e-mail' OR
activitytypecodename = 'fax') AND (actualend > dateadd(d, -'
+ CONVERT(nVarChar(20), @NeglectedDays) + ',GetUTCDate()
ORDER BY actualend
Compnetsyslc
Below doesn't work for varchar column?
select sum(cast(Enter_your_field_name as int)) from Table_name
Where did i do wrong in conversion
original query
dateadd(hour, datediff(hour,CONVERT(VARCHAR(19),B.CreateDate,111 ),B.CreateDate)
I tried to use convert(varchar(50),Datediff,21)
Below is the exact code..
convert(varchar(50),dateadd(hour, datediff(hour,CONVERT(VARCHAR(19),B.CreateDate,111 ),B.CreateDate),21)
I am trying to create a store procedure inside of SQL Management Studio console and I kept getting errors. Here's my store procedure.
Code Block
CREATE PROCEDURE [dbo].[sqlOutlookSearch]
-- Add the parameters for the stored procedure here
@OLIssueID int = NULL,
@searchString varchar(1000) = NULL
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
-- Insert statements for procedure here
IF @OLIssueID <> 11111
SELECT * FROM [OLissue], [Outlook]
WHERE [OLissue].[issueID] = @OLIssueID AND [OLissue].[issueID] = [Outlook].[issueID] AND [Outlook].[contents] LIKE + ''%'' + @searchString + ''%''
ELSE
SELECT * FROM [Outlook]
WHERE [Outlook].[contents] LIKE + ''%'' + @searchString + ''%''
END
And the error I kept getting is:
Msg 402, Level 16, State 1, Procedure sqlOutlookSearch, Line 18
The data types varchar and varchar are incompatible in the modulo operator.
Msg 402, Level 16, State 1, Procedure sqlOutlookSearch, Line 21
The data types varchar and varchar are incompatible in the modulo operator.
Any help is appreciated.
I have SSRS 2012 and have a report with an expression shown below. I am getting an error of
"[rsRuntimeErrorInExpression] The Value expression for the textrun ‘Textbox133.Paragraphs[0].TextRuns[0]’ contains an error: Attempted to divide by zero."
Textbox 133 has an expression as shown below and I cannot figure out why I get the error because I thought the IIF would bypass divide by zero.
=IIF(Sum(Fields!PriorQty.Value) = 0.0, 1,(Sum(Fields!CurrentQty.Value) - Sum(Fields!PriorQty.Value)) / Sum(Fields!PriorQty.Value))
Hello,
I am trying to write a small dynamic sql statement and I am receiving the following error when working with a bit data type.
The data types varchar and bit are incompatible in the add operator
Here is what I have:
Code Snippet
create proc [dbo].[usp_SetupDatabaseUser]
(
@ProcAccess bit = 0
)
as
begin
set nocount on
declare @sql nvarchar(MAX)
-- Check for user existence
select @sql = 'if (' + @ProcAccess + ' = 1)
begin
print ''Hello World''
end'
exec @sql
end
After I execute, that is why I receive the error. Any advice would be appreciated!
Thanks,
Flea#
One of my report has different data types like decimal,percentage and integer values.
When I exported the report to excel , all the values are showing as "general" data type.
How to get excel data type same as ssrs report data type by default when exported to excel?
I am trying to solve an issue in SQL but am getting this error
The data types xml and varchar are incompatible in the equal to operator.
My Query is fairly long. How I can resolve this?
UPDATE Promotions
SET PromotionDiscountData = '<ArrayOfPromotionRuleBase xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><PromotionRuleBase xsi:type="ProductIdPromotionRule"><ProductIds><int>13,16,15215,15223,15225,15227,15231,15261,15266,15267,15272,15274,15276,15277,15288,15289,
15290,15292,15293,15297,15299,15316,15329,15336,53787,53788,53789,55872,55873,55874</int></ProductIds>
[Code] ....
Hi,
If I make a select query on my table, this error appears:
"The data types text and varchar are incompatible in the equal to operator"
In my table , I have 4 fields with "text" datatype.
My query is like : "Select * from table where field1='test'"
It's seems to be simple, but it doesn't work!!!
Thanks
I have to display the data in the below said formats..Current sample Data in the table and the data type is numeric(23,10)
50.00
0.50
0.00
0.00
To be displayed in the below format
1.25
0.75
0
0
1
I have to map this column in teh report and should dipslay like above.I think if 0.00 is available then it should display as 0..If 1.0 is available then it should display 1.Any value that has postive number after the decimal should display all the values example : 2.25,3.75,5.06, So in general the solution to display values like 1.75,1,0 we should not dispaly 0 as 0.00 and 1 as 1.00 and 2 as 2.00 and so on...Any Solutions in terms of SQL query or SSRS expression.
I am getting the above error when trying to add a dataset to my report. Here is my stored procedure below.
USE [HSIU_TEST]
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [ssrs].[spKEMHWaitTimeCaseList]
[Code] .....
I have a stored procedure that works fine on SQL Server 2000 or 2005,but when run on an machine running MSDE, I get the Operand type clash,int is incompatible with text data type error. The data type isactually text and text is the type of data being passed. Anyparameters not being used are defaulted to null. Any ideas why thiswould happen on MSDE and work fine anywhere else?Thanks so much.
View 2 Replies View RelatedIs it possible to use the IN Operator in an expression in an SSRS 2008 R2 report? For example, to hide a textbox when the value is in a list of values, must one use nested IIFs such as:
=IIF(Fields!EYE_COLOR.Value="Blue",True,IIF(Fields!EYE_COLOR.Value="Green",True,IIF(Fields!EYE_COLOR.Value="Brown",True,False))) ?
The following would be much more straightforward, especially if the list of values is long, but it gets an error:
=IIF(Fields!EYE_COLOR.Value IN ("Blue","Green","Brown"),True,False)
i wand to filter the report based on the country as Canada and france by Using Filter but Not with Parameter..Similarly How to use Not In Operator also.
View 3 Replies View RelatedHello!I am trying to update a DetailsView but I keep getting the error of Operand type clash: int is incompatible with text. I have double checked the stored procedure but I don't see any obvious offending parameters. ID is the only parameter that is an interger. I am not trying to update the ID at all, just for the filter purposes to update the records. ALTER PROCEDURE [dbo].[proc_update] /* ( @parameter1 int = 5, @parameter2 datatype OUTPUT ) */ @BUILDING_SV float, @BUILDING_ADDS float, @BUILDING_DEL float, @BUILDING_TOTAL float, @ME_SV float, @ME_ADDS float, @ME_DEL float, @ME_TOTAL float, @PATTERNS_SV float, @PATTERNS_ADDS float, @PATTERNS_DEL float, @PATTERNS_TOTAL float, @SS_VALUE float, @SS_TOT float, @COMMENTS text, @OCCUPANCY_TYPE varchar(255), @REVISED_BY varchar(255), @DRAWINGS float, @INVENTORY float, @TOTAL float, @DIVISION varchar(255), @LOCATION varchar(255), @LOCATIONCODE varchar(255), @ADDRESS1 varchar(255), @ADDRESS2 varchar(255), @ADDRESS3 varchar(255), @ADDRESS4 varchar(255), @PROP_ID float, @POST_DATE smalldatetime, @ID intAS /* SET NOCOUNT ON */ UPDATE dbo.PROPERTY_VALUES SET BUILDING_SV = @BUILDING_SV, BUILDING_ADDS = @BUILDING_ADDS, BUILDING_DEL = @BUILDING_DEL, BUILDING_TOTAL = @BUILDING_TOTAL, ME_SV = @ME_SV, ME_ADDS = @ME_ADDS, ME_DEL = @ME_DEL, ME_TOTAL = @ME_TOTAL, PATTERNS_SV = @PATTERNS_SV, PATTERNS_ADDS = @PATTERNS_ADDS, PATTERNS_DEL = @PATTERNS_DEL, PATTERNS_TOTAL = @PATTERNS_TOTAL, SS_VALUE = @SS_VALUE, SS_TOT = @SS_TOT, COMMENTS = @COMMENTS,OCCUPANCY_TYPE = @OCCUPANCY_TYPE, REVISED_BY = @REVISED_BY, DRAWINGS = @DRAWINGS, INVENTORY = @INVENTORY, TOTAL = @TOTAL, DIVISION = @DIVISION, LOCATION = @LOCATION, LOCATIONCODE = @LOCATIONCODE, ADDRESS1 = @ADDRESS1, ADDRESS2 = @ADDRESS2, ADDRESS3 = @ADDRESS3, ADDRESS4 = @ADDRESS4, PROP_ID = @PROP_ID, POST_DATE = @POST_DATE WHERE [ID] = @ID RETURN Help! Thanks.
View 13 Replies View RelatedI'm getting this error when trying to insert data into a table.
"Operand type clash: int is incompatible with date"
This is the SQL I used to create the table:
Code:
CREATE TABLE customers(
customer_id int IDENTITY(1,1) NOT NULL,
member_yn char(1) NOT NULL,
membership_number int NOT NULL,
date_became_member date NOT NULL,
[Code]....
This is the SQL I am using to add data: (Note that there are two dates in each line, scroll to the side.)
Code:
INSERT INTO customers VALUES ('y', 156, 2010-08-29, 'John', 'Smith', '1235 Main Street, Dunmore, PA 18512', 6963287654, 'jsmith@hotmail.com', 1986-06-23);
INSERT INTO customers VALUES ('y', 159, 04/15/2011, 'Mary', 'Jones', '235 Ardmore Blvd, Pittsburgh, PA 15221', 3429831594, 'jones_mary@gmail.com', 01/12/1992);
Each of the lines above to add data uses a different data format because I tried both, while commenting out the other, hoping for the problem to go away with the change in format.
Here is the SQL code to create a primary key for this table:
Code:
ALTER TABLE customers ADD CONSTRAINT pk_customers PRIMARY KEY (customer_id);
I am trying to combine columns and add it to an existing table
insert into Future_Link.dbo.tbFLink (Fastighet, Anlaggning)
values (
(select strFastbeteckningTrakt + ' ' + strFastbeteckningBlock + strFastbeteckningTecken + intFastbeteckningEnhet
from EDPFutureGagnef.dbo.tbFuAnlaggning),
(select strAnlnr
from EDPFutureGagnef.dbo.tbFuAnlaggning)
)
Generate error:
Msg 206, Level 16, State 2, Line 1
Operand type clash: int is incompatible with text
Im trying to insert a new record into tblMessages...the unique ID generated for MessageID is the value I want to use as a value for the MessageID field when inserting a new record in tblUsersAndMessagesI have the following sp:
-- ================================================
-- Template generated from Template Explorer using:
-- Create Procedure (New Menu).SQL
--
-- Use the Specify Values for Template Parameters
-- command (Ctrl-Shift-M) to fill in the parameter
-- values below.
--
-- This block of comments will not be included in
-- the definition of the procedure.
-- ================================================
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author: <Author,,Name>
-- Create date: <Create Date,,>
-- Description: <Description,,>
-- =============================================
CREATE PROCEDURE spNewMessage
@UserIDSender nvarchar(256),
@MessageTitle nvarchar(50),
@MessageContent text,
@MessageType int,
@MessageID uniqueidentifier,
@UserID uniqueidentifier
AS
Begin
Set NoCount on
DECLARE @WhateverID uniqueidentifier
INSERT INTO tblMessages(UserIDSender,MessageTitle,MessageContent,MessageType)
VALUES (@UserIDSender,@MessageTitle,@MessageContent,@MessageType)
Select @WhateverID=@@Identity
INSERT INTO tblUsersAndMessages(MessageID,UserID)
VALUES (@WhateverID,@UserID)
End
GO
And here are my tables:tblUsersAndMessages allow nullsMessageID uniqueidentifier falseUserID uniqueidentifier falseNew bit false *default set to ((1))
tblMessages allow nullsMessageID uniqueidentifier false *PK default set to (newid())UserIDSender uniqueidentifier falseMessageTitle nvarchar(50) trueMessageContent text trueSentDateTime datetime false * default set to (getdate())MessageType int false
Now when I try to add my SP I get this error:Msg 206, Level 16, State 2, Procedure spNewMessage, Line 22Operand type clash: numeric is incompatible with uniqueidentifierWhat can this be?!?
I uploading an image from a web page into Sql Server 2000 database. I call a stored procedure with the parameter @Flag of type Image. When I tried to pass a null value to this parameter I got the error:"Operand type clash: nvarchar is incompatible with image".I was adding the parameter like this:sqlCmd.Parameters.AddWithValue("@Flag", DBNull.Value);After trying few different things I found a workaround using the following:sqlCmd.Parameters.Add("@Flag", SqlDbType.Image);sqlCmd.Parameters["@Flag"].Value = DBNull.Value;Possibly a bug in the SqlCommand.Parameters.AddWithValue method ?
View 1 Replies View RelatedHow can I make it work when I need to pull out a field which is text type using a stored procedure? Please help!!!Thanks
I am getting the following error
Error 409: The assignment operator operation could not take a text data type as an argument
===========my sp=================================
CREATE PROCEDURE [dbo].[sp_SelectABC]
(@a varchar(50) output,
@b text output
)
AS
set nocount on
select @a=name, @b= description from ABC
GO
This is a piece of my code:
SELECT TOP 1000 *...
case when Rownum<= datediff(day, salesdate, baseenddate)
then DATEADD(mm, RowNum, salesdate) /*error at this point*/
else 0 end as subscriptionrowdate
FROM Subsrow
Rownum is an integer type. DATEADD is the part when the error is but i dont know how to convert this to int
Can i still get the sum of a field even if the data type is of type varchar?
thanks!
Funnyfrog
I am using a stored procedure which returns a value of charecter datatype 'V' to the calling program.I am getting an sql exception System.Data.SqlClient.SqlException: Syntax error converting the varchar value 'V' to a column of data type inti didnot define any int datatype in my tablethis is my codeSqlCommand com = new SqlCommand("StoredProcedure4", connection);com.CommandType = CommandType.StoredProcedure; SqlParameter p1 = com.Parameters.Add("@uname", SqlDbType.NVarChar);SqlParameter p2 = com.Parameters.Add("@opwd", SqlDbType.NVarChar);SqlParameter p3 = com.Parameters.Add("@role", SqlDbType.NVarChar);p3.Direction = ParameterDirection.ReturnValue;p1.Value = username.Text.Trim();p2.Value = password.Text.Trim();com.ExecuteReader();lblerror2.Text = (string)(com.Parameters["@role"].Value); can your figure out what is the error ? Is it a coding error or error of the databse
View 3 Replies View RelatedI encounter this particular error.
Exception Details: System.Data.SqlClient.SqlException: The data types varchar and text are incompatible in the equal to operator.
Line 21: Dim reader As SqlDataReader = command.ExecuteReader()
This is the first time I'm trying out with MS SQL so I'm abit lost. I hope my code is correct and I've did a little search. I did not set "Text" in my database, I use int and varchar. Here's the affected part of my code and the database. Dim password As String = ""
Dim querystring As String = "SELECT Password FROM Member WHERE Username = @username"
'Dim conn as SqlConnection
Using conn As New SqlConnection(ConfigurationManager.ConnectionStrings("mainconnect").ConnectionString)
Dim command As New SqlCommand(querystring, conn)
command.Parameters.Add("@username", SqlDbType.Text)
command.Parameters("@username").Value = txtLogin.Text
conn.Open()
Dim reader As SqlDataReader = command.ExecuteReader()
While reader.Read()
password = reader("Password").ToString()
End While
reader.Close()
End Using
My database:
User_ID int(4)
Username varchar(50)
Password varchar(255)
Email varchar(50)
Any ideas?
I am parsing a documnet and i am grabbing that document into a variable of datatype varchar. The document contains more than 8k(upto 30k characters) characters. So how can I handle this situation.How can I get that document into my local varchar variable.
thanks.
We have an SSIS package that reads in a tab delimited file and throughs the data into a SQL Server 2005 table. The package worked fine on the test files but when we recieved the production files we are getting the error message:
Invalid data for type "numeric".
Needless to say this is not very discriptive. I ran a trace on the DB durning the call and its doing a bulk insert
BULK INSERT [dbo].[FNIAllAppData]
FROM 'GlobalDTSQLIMPORT 00000000000015b800000000009fbd88'
WITH (DATAFILETYPE = 'DTS_Buffers', CODEPAGE = 'RAW', CHECK_CONSTRAINTS, TABLOCK)
When I changed the Data Flow Destination off to OLE DB Destination the error does not occure and all records are loaded successfully.
Any suggestions or help would be appreciated. Thanks.