Hello,
I'm having some problems and I wonder if anyone can help me.
I need to call a stored procedure to retrieve some data from the bank and use it in a report.
I'm using oracle DB, but I'm not using ODBC, I'm using Oracle.
I can call the SP using 2 commands:
1- in the dataset data form, I can select the command type as Stored Procedure and write the name of my procedure without the arguments, and then the VS ask for the arguments
2- in the same form, the command type as TEXT, i can use the syntax: call <SP name>(arguments)
My problems are:
-in the first way, how can I programatically set the arguments to send?
-in both of them, how can I define that the data that should be stored in the dataset is in the out cursor parameter?
I am trying to call oracle stored procedure from SRSS 2005. I am using the syntax { Call s_test_rcur()} . I am getting following error.An error occurred while retrieving the parameters in the query.ORA-00911: invalid characterORA-06512: at "SYS.DBMS_UTILITY", line 68ORA-06512: at line 1
ORA-00911: invalid characterORA-06512: at "SYS.DBMS_UTILITY", line 68ORA-06512: at line 1Â (System.Data.OracleClient) Here is the Oracel stored proc. TYPE rc_test IS REF CURSOR; PROCEDURE s_test_rcur (po_test_rc OUT rc_test, -- returns a record setpo_error OUT INTEGER)ISBEGIN g_err_level := 1;OPEN po_test_rc FORSELECT a.ssn_id,TO_CHAR (a.acad_yr) || TO_CHAR (a.acad_yr + 1) acad_yr,RPAD (NVL (last_name, ' '), 30, ' ') last_name,RPAD (NVL (first_name, ' '), 30, ' ') first_name,NVL (middle_initial, ' ') middle_initialfrom test_tableorder by last_name;po_error := 0;EXCEPTIONWHEN OTHERSTHENpo_error := -1;g_error_code := SQLCODE;g_error_msg :='Err level :' ||TO_CHAR (g_err_level) ||' ' ||SUBSTR (SQLERRM, 1, 250);END;
Hi, I want to get data from Oracle 10g Stored procedure to Reporting Services 2005. I could pass a SQL text and get a record set, but I want to execute a store proc and get the record set.
1. Add New Data Source 2. Choose Type : Oracle and connection tested OK 3. { call Test_Package.Test_Procedure(?) } is it wrong... how to write??? There is an error in the query. ORA-00911: invalid character
Also make sure that you use the text-based generic query designer (2 panes !) instead of the visual query designer (4 panes) - you can switch between them through an icon on the toolbar in the data view of report designer. Question : I tried many methods but unable to solve it...
create or replace PACKAGE Test_Package AS TYPE Test_Type IS REF CURSOR RETURN Test_Table%ROWTYPE; END Test_Package;
create or replace PROCEDURE Test_Procedure ( Test_Cursor IN OUT Test_Package.Test_Type, Test_Parameter IN Test_Table.ID%TYPE ) AS BEGIN OPEN Test_Cursor FOR SELECT * FROM Test_Table WHERE Test_Table.ID >= Test_Parameter; END Test_Procedure;
The below site gave some example but i could not solve it... any suggestions greatly appreciated...
I have created CLR Stored Procedure and my CLR stored procedures are not appearing in the Stored Procedures drop-down list located on the Data tab within the VS2005 Business Intelligence Development Studio. After Creating the dll I have registered the dll like that CREATE ASSEMBLY MY_SP_NAME from 'C:MY_DLL_PATHMY_DLL_NAME.dll' WITH PERMISSION_SET = SAFEAfter registering I have deployed the dll :CREATE PROCEDURE [dbo].[MY_SP_NAME] @dbname [nvarchar](4000), @varTable [nvarchar](4000), .............. .............. .............. ASEXTERNAL NAME [MY_DLL_NAME].[MY_CLASS_NAME].[MY_SP_NAME]GOEXEC sys.sp_addextendedproperty @name=N'AutoDeployed', @value=N'yes' , @level0type=N'SCHEMA',@level0name=N'dbo', @level1type=N'PROCEDURE',@level1name=N'MY_SP_NAME'GOEXEC sys.sp_addextendedproperty @name=N'SqlAssemblyFile', @value=N'EXAMINER_WORKSHEET_F_hmz4_Ex.cs' , @level0type=N'SCHEMA',@level0name=N'dbo', @level1type=N'PROCEDURE',@level1name=N'MY_SP_NAME'GOEXEC sys.sp_addextendedproperty @name=N'SqlAssemblyFileLine', @value=10 , @level0type=N'SCHEMA',@level0name=N'dbo', @level1type=N'PROCEDURE',@level1name=N'MY_SP_NAME'GOThe Stored Procedure is deployed successfully to SQL Server 2005, but its not showing in the drop-down list located on the data tab while I am desiging my RDL layout.All of the non-CLR stored procedures are present. Is there something I need to do to add these CLR stored procedures? Please please ASAP.
Hi all,I am using Stored procedure to design report instead of Query. Problem is i am unable to view the fields in the dataset. Any body please tell me the Steps to use Stored procedure in Reporting Services design. Regards.
I have a big SQL Stored Procedure which works with a cursor inside of it. During the procedure the data is inserted into a table and at the end is a SELECT statement from that table. The problem is that when i create a dataset with that stored procedure and i run it in the Data tab i get the correct select, but in the Fields section of the Report I don't get the fields from the last SELECT, but the fields from the cursor. Am I doing something wrong or is this a bug and how can i fix it. Thanks!
I have stored procedures that will run fine from query analyzer windows, from other programs, etc. When I try to run the sp from vs 2005 form with in a SSRS project, the sp just hangs. It will not return any records and the app says "Not Responding. This does not happen for all SP's only some of them. Any ideas?
I am working with one example on SQL Server 2005 Reporting Services. I have a stored procedure with two parameters. I want to call this stored procedure from SQL Server Reporting Services 2005.
CREATE PROCEDURE spEmp ( @id int, @name varchar(150) ) AS BEGIN SELECT EmpId, EmpName, EmpSal FROM Emp WHERE EmpId = @id AND EmpName = @name END
I want to pass
@id AND @name
parameters from reporting services form. Can you please give me link / article / steps to follow this in SQL SERVER REPORTING SERVICES 2005 ?
I have a report. I need to make a drop-down parameter optional. I've setup the parameter to use a dataset as its source, and I need to allow the value to be null. I've selected allow nulls check box, and I've even tried setting the default value to System.DBNull.Value. But, when the entry is not selected (blank), no data ever comes back. If the data is blank or null, my procedure works (I've tested it). How do I send a null value to the database through reporting services report? I was hoping to avoid creating a special query just for that purpose.
I have a stored procedure (sproc) Â running in Firebird Database. Now I try to use this sproc to build a report in the SSRS 2012 (SSDT) Report Designer.
After I connect to the dataset, and when I choose the Query Type as 'Stored Procedure', and type the name of  my sproc, and then go to the Query Designer, and click ! (F5)  ,  I get the following error:
TITLE: Microsoft SQL Server Report Designer ------------------------------
An error occurred while executing the query. ERROR [HY000] [ODBC Firebird Driver][Firebird]Dynamic SQL Error SQL error code = -104 Token unknown - line 1, column 1 [sproc name]Â
how to resolve this? If its a T-SQL sproc, then it will be no issue; in this case, Â Firebird database connects to the SSRS via a 32-bit System ODBC connection.
When I proceed and click ok for everything, I get this error (after I exit the Query Designer), in the Dataset Properties tab:
"Could not update a list of fields for the query. Verify that you can connect to the data source and that your query syntax is correct."
The ODBC connection between SSRS and Firebird works fine. In fact I am able to run many queries as ad-hoc ones, Â but when I use the queries as sprocs, then this issue pops up.
how to handle Firebird stored procedures  in SSRS.
I have created a query in which I have used first_value, lead, lag windows functions. I tried using the query in SSRS query text, but for some reason it could not load. Then I created a stored procedure and implemented that query in stored proc.
The problem is that I am able to execute the stoured proc from sql server studio, but SSRS is not able to load data.
I used a stored procedure in my report. If I run the sp in Management Studio (on my pc, database is on a sql server) it takes only several minutes; but from reporting services (also on pc) I put it in the data tab and execute it, it takes forever, actually never finish. I want to know why it's taking so long to execute it from reporting services while it returns data instantly from Mgt Studio. There is cursor in the sp. I don't know whether this is the culprit. Anyone knows why? Thanks!
Below is the sp. --------------------------------------------------------------------
Created a report that displays the Maximum Response time (example of value 00:00:00) which is directly pulled from the Stored proc.When I ran the report, the column displays blank values.I am not sure if I should add any conversion to the Response value in the report.
I was wondering if it was possible to call reporting server web service directly from my sql server stored procedure. The call that I need to make to reporting web service needs to generate the report in a PDF format.
I am using SQL Server 2008 R2 SP1, and BIDS 2008 SP1. The problem I am about to define does NOT happen when the report is deployed to the report server, but only within the report development environment (BIDS).
From within BIDS my reports are fed by stored procedures. The problem is when I modify a stored procedure in Management Studio, and refresh the report from within BIDS, the report does not reflect the new changes made in the stored procedure. So far I have found one clumsy solution to this problem:
1) Go to the folder where the project is saved on the file system.
2)Find the ".data" file that is associated to the particular report, then delete it. For instance, if my report name is TestReport.rdl, find the file named TestReport.rdl.data, then delete it.
I have a requirement to display each student Fitness test results in the form of a Box plot chart with High Whisker , Low whisker , Low box,high box , Mean and Median in a stored procedure since test areas are dynamic. But , i have never done this before.
Test Type TestSeq Test Date Student ID TestArea Test Result
I have an issue with using multiple parameters in SQL Reporting services where data is passed in from a stored procedure
When running the report in design mode - I can type in a parameter sting and it runs fine
In the report preview screen I can select single parameters by ticking the drop down list and again it runs fine
as soon as I tick more than one I get an error
An error occurred during local report processing
Query execution failed for data set €˜data'
Must declare the scalar variable '@parameter'
Some info...
The dataset 'workshop' is using a sproc to return the data string?
I get multiple values back fine in the sproc using this piece of code
(select [str] from iter_charlist_to_table( @Parameter, DEFAULT) ))
I have report parameters set to Multi-Value
Looking through the online books it says...
You can define a multivalued parameter for any report parameter that you create.
However, if you want to pass multiple parameter values back to a query, the following requirements must be satisfied:
The data source must be SQL Server, Oracle, or Analysis Services. The data source cannot be a stored procedure. Reporting Services does not support passing a multivalued parameter array to a stored procedure. The query must use an IN clause to specify the parameter.
I am trying to generate a report using  SSRS ( SQL server 2012 & Visual studio 2013).  when I try to execute stored procedures I am getting below error. Below are the details of enviroment.
1. SQl serverr 2012 2.Oracle 12c client 3.Oracle Server 12c 4.Visual studio 2013
Hi, I'm new to SSRS but have a problem connecting to Oracle. I have placed my reports upon a reporting server but the shared data connection isn't working and I'm confused as to why. I have specified the name, connection type as "Oracle", set the correct user id and password for the credentials and the connection string as for example 'Data Source=oracleExample;Unicode="True"'. I also have set the correct entry in the tnsnames.ora file for this datasource, example: "oracleExample = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 12.23.45.23)(PORT = 3425)) ) (CONNECT_DATA = (SID = oracle) ) )" Unfortunately I receive the following error when trying to connect. "
An error has occurred during report processing.
Cannot create a connection to data source 'oracleDataSource'.
For more information about this error navigate to the report server on the local server machine, or enable remote errors
"
I'm mystified as to what the issue is. Any ideas? Would restarting the report server pick up the tnsnames.ora file? I have this working locally using report designer. Any help, much appreciated.
Anybody have a clear idea why I might have problems connecting from reporting services to Oracle 9i database using the Microsoft ODBC driver? Getting following error "Cannot create a connection to data source 'oracleName'.
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
"
I have the data source correctly set-up thought. Is it a permissions problem?
I am a beginner with Report Designer (and with Reporting Services). Following the tutorials 'Adding parameters to filter Reports ...' I tried using the @symbol to add a parameter to my query: where code = @code_value...I get the error: ORA -000936 missing expression (msorlib) Is there another syntax that I should use to define a parameter/variable in query for my oracle dataset?
Hi, I'm trying to do a straight forward call to an Oracle Stored Procedure from a GridView Web Control using UpdateQuery. I created a simple procedure (then tried a package) with no parameters (then with a parameter) and tried to call it from UpdateQuery. I either get a Internal .Net Framework Data Provider error 30 with a parameter or Encountered the symbol "UARF_FUNCTIONAL_UPDATE" when expecting one of the following: := . ( @ % ; without using a paremeter. My updatequery on the sqldatasource control is: exec uarf_functional_update; I'm sure I'm missing something very simple (syntax or something), but I can't find the right direction in my help material. Any assistance would be greatly appreciated. Thanks, E.
I am facing problems while calling Oracle stored procedure which has no parameters.
I have used Microsoft OLE DB provider for Oracle. I have taken one Execute SQL task and set the SQLStatement as call procedurename
I also set the IsStoredProcedure property to True for Execute SQL task.
Is there any synatx problem?
I am getting an error saying
Error: 0xC002F210 at Call Sp, Execute SQL Task: Executing the query "(call sp_procname)" failed with the following error: "ORA-00928: missing SELECT keyword.
I removed the curly braces for the SQL statement and again ran the Package, i am getting the below error
Executing the query "call sp_procname" failed with the following error: "ORA-06576: not a valid function or procedure name
Can anyone help me out on this regard! Thanks in advance
Is it possible to use an Oracle Stored Procedure for an RDLC report. There are posts I've read that deal with RDL reports that use the data tab and command type of "Stored Procedure", but I don't have that installed. I just create a new dataset that the report uses. I can do reports just fine with SQL statements, but I want to be able to call a stored procedure...
