In SSRS reports i have multiple charts and tables. per page i have to display one chart and one table. How to put page break after the chart and table. I have not used rectangle. I created all the charts and tables in the body area.
View 5 RepliesI have a Report In that report I need to break out company code and export this report on excel and each company code shown its own tab in excel .I just add image about report details.I tried this issue but i cant get the exact names on excel sheet.
View 3 Replies View RelatedExample: A sales report that details and summarizes each Salesperson’s total sales within a company’s stores that reside in each state.
The report has 3 levels of groupings where the highest 2 levels require summary counts on a separate page and the lowest level produces a summary count in the midst of the detail lines of the report.
The data consumed by the report is ordered by State, Store ID, and Salesperson.
The header of each page lists the State and Store ID. The detail lines of the report list items sold and the associated sales amount for each item sold by each store’s salesperson.
At the end of each Salesperson’s items sold, a summary line is listed on the next line in the report showing the total amount and total count of items sold by that Salesperson.
The very next line on the report lists items sold and the associated sales amount for the next Salesperson within that particular store.
Summary lines will be produced for each Salesperson within each particular store on the next line of detail in the report.
At the end of all sales data for each store, a summary page is produced on a separate page listing the summary of each Salesperson’s totals.
Each line of the summary page contains the same counts for each Salesperson that was embedded in the detail section of the report.
The summary page also contains a grand total line listing the total count and sales for all salesmen within each given store.
At the end of all sales data for each state a summary page is produced on a separate page listing the summary of each store’s totals.
Each line of the summary page contains the grand totals of all sales for each store within a given state.
The summary page also contains a grand total line listing the total count and sales for all stores within each given state.
The simple breakdown is the groupings and totals for each state and store must be listed on a separate page in the report.
The grouping and totals for each Salesperson must be listed on the next line within the detail section of the report.
Current issue: The requirement is for no page break at the end of each salesperson’s sales data because the page breaks produce too many extra pages in the report.
Disabling the page break at the Salesperson level produces format issues such as page headers printing on the next line in the report before each Salesperson’s summary line.
Disabling the page breaks at this level also produces the problem of suppressing the page break for the summary page that comes at the end of each store.
Question:The report has 3 levels of grouping with Salesperson at the lowest level, Store ID being the parent group of Salesperson, and State being the parent group of Store ID. Is it possible to format the Salesperson summary line (lowest level grouping) as just another detail line in the report without impacting the report format that requires page breaks at the parent group levels?
A sample report layout of what we are trying to achieve is on the next page.
Sales Report
State: Alaska
Store ID: 100
Item Sold
Sales Amount
Hammer
$10.00
Saw
$15.00
[Code] .....
I have a report with multiple tables. I need to show each tables in different pages. When there is no data for tables/tables , it is coming with the next table which has data. I have given "Add a page break after" option in the tablix but still the tables are coming together when no data available. How can I show it in different page?
View 2 Replies View RelatedI have designed a report in which there are 6-7 charts. I want to print each chart in a new page. For this I have inserted page break after each chart. After this the report is populating fine but when I am exporting the report in pdf the page break are not working.
View 4 Replies View RelatedWe are facing problem in doing page break with column grouping. Our column group contains years e.g 2011, 2013 . We want to show a complete page for a year.
Suppose 2011 has 10 records(horizontal) and 2013 has 12 records(horizontal) in column. The output should be 10 records of 2011 in first page, 12 records of 2013 in second page.
We cannot change the report layout to make column to row and vice versa.
I have a detailed report in ssrs in which data can come from start date and end date parameters.but the problem is. for example i gave startdate as 01/01/2015 and end date as 09/31/2015 then the data must be in displayed in such a way that jan month in one tab and feb month data in one tab and so on to sep month data in new tab when i export to Excel.
View 3 Replies View RelatedI have a SSRS report with data in below format.
ID Name Date
1 A null
2 B 01/01/2012
3 C 01/02/2013
Also, I have a sort parameter @sort and values are (Name, ID, Date)
I want to apply page break whenever @sort=Name. There should be no page break when user selects @sort = ID or Date. Page break should happen only when @sort value = Name
it should be like this...
Page 1:
ID Name Date
1 A null
Page 2:
ID Name Date
2 B 01/01/2012
Page 3:
ID Name Date
3 C 01/02/2013
I need achieving the above task.
I have one requirement. We have one application in banking and they have developer that application using c# and .Net code so For Business Users--when they enter their details and when they want to check Reports--it should take to a another UI or web page where Users will see all the reports--- and clicking the report he/she should be get able to export it into different formats..
i know that we can give report manager URL--but due to various issues-- we have choosen to built a web[age where they can see the reports work-flow:
so--user opens bank site--enters his details-goes into reports--it should open new webpage or UI, he should see all reports--he should export these reports..
After that based upon security levels each user can see their individual reports.
How do I add a hard page break in the middle of a two page report? I use Microsoft reports for windows.
View 5 Replies View RelatedI want to page break after after 6 grno recored.I used ceiling(rowNumber(Nothing/6)) but it worked differ(this fun used on top most group )below I attached screeshot. I need to page break after 6 grno record but above syntax measure 6 datafiled row and then page break.how I can page break after 6 grno record
View 3 Replies View RelatedI am currently migrating several Crystal Reports that have charts. The chart series is set to use the TopN values in a count, and combine the rest of the series into one series titled "Other". I see how to filter the chart using TopN, however I need to still show the rest of the data grouped as "Other". I think the solution I need is to create a group expression that uses some sort of IIF function to create the "Other" group, but I haven't found a function that I can use to get the results I need. Any ideas?
Scott
I have an existing report that has a table that contains two groups. The 1st group has the option to "page break at start". The 2nd group isn't set to page break. The report works correctly if the 2nd group's data fits on to a single page per data group. However, if the 2nd group's data for one of the iterations crosses page boundaries, it causes issues with the beginning of the report. The report breaks the 1st groups rows into separate pages, and combines the previous row with the next row on the next page, until the 2nd group is encountered, and then another page break.
Example (Assuming 3 rows in the 1st group)
1st group - 1st Row
<page break>
1st group - 1st Row
1st group - 2nd Row
<page break>
1st group - 1st Row
1st group - 2nd Row
1st group - 3rd Row
<page break>
1st group - 1st Row
1st group - 2nd Row
1st group - 3rd Row
2nd group - 1st row
<page break>
1st group - 1st Row
1st group - 2nd Row
1st group - 3rd Row
2nd group all remaining rows now appear.
This report works fine on SQL 2000 SP2, and SQL 2005 SP1. In my test environment, I was able to verify that the report worked on the previous SSRS versions, and then broke immediately following the installation of SQL 2005 SP2. I have tried many things from changing the paging, grouping, table structure, and starting from scratch. Maybe I have missed something. If anyone has any ideas or suggestions, I would appreciate the help.
I have a dataset with 2 fields : code and value. I have a parameter that will give me the data to insert into the table I want to make. The number of rows is not fixed, so I couldn't create, for example, a table with a fixed number of rows.
I want to create some kind of table that will allow me to have cells that look like this : "code" : "value" and have 3 of them (like 3 columns) before I switch to the next line (row).
Just to make it clear, I'm not using any SQL requests here, data comes from XML.
It should look like this :
code1 : value1 code2 : value2 code3 : value3
code4 : value4 code5 : value5 code6 : value6
code7 : value7
and it'll go like this until I've used all the data.
i have used rdlc report. how can i set the page break in report
View 6 Replies View Related
Hi -- I have a different problem than most people with a Reporting Services 2000 report rendering to Excel 2003.
My report has 5 different subreports. I want them to appear in Excel as 5 separate tabs. When rendered through the browser (using Report Manager), the page breaks are correct -- there are 5 pages.
When exported to Excel, the first report is on a separate tab, and the other 4 are jammed together on one tab.
Each report consists of between 1 and 4 tables. The last table on each report has the "page break after this table" checked.
The same report deployed to SSRS 2005 page breaks the way I expect in Excel. In SSRS 2000, it doesn't.
Any ideas? Report/body page widths/heights?
Cheers,
David
I developed a main report containing numerous subreports. But now I'm trying to page break on these subreports and because these subreports all have sub-sub reports, I get this error when I try to run this report..The value '22' is invalid. Valid values are between '0' and '1'. (rrRenderingError)..I am grouping on uniqueidentifers and I do not get errors on subreports that have sub-subreports. How can I avoid this error and get these subreports to page break? (I don't get any errors if I remove the page breaks).
View 3 Replies View RelatedI have a group in my report that contains an empty footer row to get a better visibility. Because the row has a frame it should be hidden if its the last row on the page. How can I manage that?
View 4 Replies View RelatedI created a subreport1 with tablix.I created second subreport2 that has a tablix and one column chart and both are placed in a rectangle. No page break is applied to this rectangle. When I run the sub report, both tablix and Column chart are displayed on one page .
I created a main report and added Subreport 1 and Subreport 2 in 2 different rectangles. I set page break property of Rectangle(Subreport1) to End and no page break is applied to Rectangle of Subreport2.
When I run the main report, subreport1 is displayed in one page, subreport2 is displayed in 2 different pages.
SSRS 2008 R2
I have two level of grouping Example:
:::HEADER:::
A [GROUPING 1]
B[GROUPING 2]
C[GROUPING 2]
When I apply Page Break
:::HEADER:::
A [GROUPING 1]
B[GROUPING 2]
:::HEADER:::
A [GROUPING 1]
C[GROUPING 2]
[URL]
In ssrs text box data is coming from database in single line .But actually it is of two different paragraph.so how to break the paragraph data in two different line .
View 8 Replies View RelatedI have a requirement to display each student Fitness test results in the form of a Box plot chart with High Whisker , Low whisker , Low box,high box , Mean and Median in a stored procedure since test areas are dynamic. But , i have never done this before.
Test Type
TestSeq
Test Date
Student ID
TestArea
Test Result
[code]...
I have a master detail reports in one page. Master report displays all the products and details report shows their orders... What I want is, when user clicks on products graph its detail graph show the orders of that particular record on the same page. Both reports would remain visible on the same page side by side.
View 4 Replies View RelatedI have a Manager dashbord report.In this report 1st page contains some tables and 2nd,3rd page contains line charts with tables.Actually what we need is in 1st page tables are pretty simple,we need to add kpi's and shown these tables in kpi. kpi in ssrs and how to add kpi in ssrs reports?
View 2 Replies View RelatedIs there a way to publish the MDW (Data Collection) reports (Disk Usage history, Query Statistic history, and Server Activity history ) on SSRS server?!
It is not logical for all who wants to view the mentioned reports to open the SSMS !
I've already check [URL] .... there, the writer is suggesting to recreate the reports from scratch on SSRS, that if I could figure their queries, which I don't think the only way that we have!
I'm using the SQL Server Reporting Services to build a sales report.
I'm having two different reports because I need to have a matrix table into one of them.
Is possible to Join two different reports (two different reports.dll) into one? Basically, can I, in the end, export two different reports in only one report?
I make SSRS Reports and I use SSRS RDL file to perform coding and all..
How can I use jQuery scripts in my Report Server Reports(SSRS) to make it more attractive and user friendly?
I have generated an invoice report is SSRS. It works correctly via Report Builder and the viewer. However if I then export the report to PDF, it throws the formatting of the report off.
As I have mentioned, it is an invoice report. If I print 1 invoice, and export it, everything exports correctly and all formatting is retained. However if i print off and export multiple invoices (range of Invoice 1 to 4), the 1st invoice is exported correctly, but all subsequent ones are not. In so far that where 1 invoice should be printed on 2 pages of A4 paper, it is spread over 7 pages.
The header is one page, then 1 row is on the second page, then a blank page, then another set of data on another page etc. Is it a problem with the page/report sizing/margins?
I have 400 records in my report , i want display 20 records per page , how can i do the same in ssrs.
View 18 Replies View RelatedI must be missing a check box somewhere........ I simply added a group to a report and need to do a "Page Break Before" each group. I found the check box to do that, and the report works as expected, BUT I get a blank fist page. So how do I prevent a "page break" on the "first time through"?
View 11 Replies View RelatedI am trying to find a way to make a page break after each statement in a report, but the page break after table does not seem to work.
Any ideas?
Is there a way to find all SSRS scheduled reports details such as (Report Name, schedule time, mail IDs configured, etc.)?
We have many SCCM reports on SRS, and manual work will take very long time..
In my report i have more than 10 sub reports each should be displayed when we click on some label but my requirement is to expand all the sub reports at a time or collapse the sub reports.URL.....problem here is it is a genius solution working beautifully in my local machine but in the client server if i click on the Expand/Collapse radio button it is asking for the parameters again.
View 9 Replies View Related