I am using 2 charts in my SSRS Report. Requirement is to load the Right side chart based on the click event from left chart.
I can achieve it using go to report option. But the issue is total page getting refreshed while using this option. I feel bookmark option will be the best. But I don't think I can pass a value to Bookmarks.
Table : incident
----------------
incident_id usr_id item_id Inc_Date
10059926 191 61006 8-22-2015
10054444 222 3232 6-7-2015
Table: act_reg
--------------
act_reg_id act_type_id incident_id usr_id act_type_sc
454244 1 10059926 191 ASSIGN
471938 115 10059926 191 TRAVEL TIME
473379 40 10059926 191 FOLLOW UP
477652 115 10059926 191 TRAVEL TIME
489091 504 10059926 191 ADD_ATTCHMNTS
477653 504 10054444 222 ADD_ATTCHMNTSParameter: @attach (value=1, Label=Yes & Value=0, Label=No)
Result (While I am selecting 'Yes' in dropdown)
----------------------------------------------
incident_id usr_id item_id
10059926 191 61006
10054444 222 3232
SELECT incident.incident_id,incident.usr_id,incident.item_id
FROM incident
where exists (How i can write query here to check the act_type_sc=ADD_ATTCHMNTS is exists)
I want to bookMark from one table to another in current report. Below are the 2 tables , when I select a
FromBrandName in the first table, it should take me to the second table row with the same
FromBrandName. Is this possible? Is there a function to access a specific running value other than First and Last?
I have a situation in SSRS to get the common values between the two columns where the values are sorted comma separated as below.Ex:
ColumnA : abc,cde,efg
ColumnB : cde,xyz,abc
the result in
ColumnC : cde,abc
similarly Column A and B will have n number records. I need to right an expression or the Code function to get the required result in ColumnC. I am using SharePoint Lists as Datasource. Cannot write SQL query to achieve this requirement.
I am SSRS user, We have a .net UI from where we want to pass multi select values, but these values are comma separated in the database. how can I write a sql query such that when I select multi values on my UI, the comma separated values are take care of.
View 5 Replies View RelatedI am trying to test the concept of passing multi value parameters from one report using the Action Property of a textbox to open another report is a new Window with the Multi Value parameter values already passed. The test involves the following:
Report 1:
1. Multi Value Parameter @ReportParameter1 has three Values: Value1, Value2, Value3
2. Has a text box with the Action Property set to Go to URL with the following Expression:
="javascript:void(window.open('http://reportserver/Reports/Pages/Report.aspx?ItemPath=%2fReports%2fReport2&rs:Command=Render&ReportParameter1="
+ JOIN(Parameters!ReportParameter1.Value,"&ReportParameter1=") + "'))"
Report 2:
1. Has Two Parameters @ReportParameter1 and @ReportParameter2
2. @ReportParameter1 has Available Values as follows: Value1, Value2, Value3
Does not have any default Values.
When I click on the textbox on Report1, it does navigate to Report2 but none of the Values are being set.
we are using SSRS 2012.Oracle 9i as back end database. Select A,B,C from view where A in (Param1) in above query when I am passing 1 value getting output in 30 sec. when I passed two values getting time out error in SSRS. how to pass multiple values in Oracle 9i in SSRS report.
View 4 Replies View RelatedI am building a webapp that calls an SSRS instance to display a report based on another servers web service.I can make a call from the ssrs server using this in the RDL:
<Query>
<Method Namespace="http://machine/webservices" Name="HelloUser">
<Parameters>
<Parameter Name="user">
<DefaultValue>Craig</DefaultValue>
</Parameter>
</Parameters>
</Method>
<ElementPath IgnoreNamespaces="true">*</ElementPath>
</Query>
This works no problem. but.. I want to have the user parameter "Craig" be a parameter passed in from the web app. If it were a regular SQL data source you would put @user in the query. How do you do it with XML text queries?
The data source is Fetch XML - so all the values are string.I need to sum the values but getting an error:
Warning 1 [rsAggregateOfNonNumericData] The Value expression for the textrun ‘Textbox25.Paragraphs[0].TextRuns[0]’ uses a numeric aggregate function on data that is not numeric. Numeric aggregate functions (Sum, Avg, StDev, Var, StDevP, and VarP) can only aggregate numeric data.I tried converting it to INT but it returns a large number which does not match what I'm expecting.
I want to round 0.356 to 1? How can i do a round up in SSRS reporting services.
I am using this code:
The Sum of the Price_Call here is 0,3965 ---> I want to round it to one!
= Round ( Sum(Fields!Price_Call.Value), MidpointRounding.AwayFromZero ) --- > This is always giving me 0
I'm building a report that has a column in the table called countries of origin, that column can contain data like "USA","China" ( normal countries) but some rows can also contain "USA, China, Australia" ( multiple counties in one row).
I'm trying to build a filter to filter my results :
-I have a data set created with a list of all world countries
-I've Build a Parameter containing a drop down list with all countries
--- My problem is when I want to create the filter in my main data set , I can so it , but when I search for example for "USA" , I don't get the lines where there are multiple countries and "USA" is one of them...
There must be an expression in the filter that will be able to search through all the values in the string and return me my correct results.
I am having SQL query which has inner join table from another Database. The below highlighted query shows its values.
/*Trend and Capacity Report*/
SELECT MEA.DisplayName AS Cloud, MEB.DisplayName AS VM, OS.PropertyValue AS OS, CONVERT(varchar(17),PD.DateTime,113) AS Date,
VM3.VirtualCPUCount AS VCPU
FROM Perf.vPerfDaily AS PD
INNER JOIN vPerformanceRuleInstance AS PRI ON PD.PerformanceRuleInstanceRowId = PRI.PerformanceRuleInstanceRowId
INNER JOIN vPerformanceRule AS PR ON PRI.RuleRowId = PR.RuleRowId
[code]....
My request is to calculate total capacity of all available Virtual CPUs, Memory and Storage from 4 separate clouds: 'cloud1','cloud2','cloud3','cloud4'
Whenever I select =Sum(Fields!VCPU.Value) expression in Report Properties and assign it to a variable and assign that variable to a Text Box field I get the value as VCPU * (Number of VMs) which is not correct.
I am looking to get the value of VCPU from all 4 clouds above.
I am trying to build a report using SSRS.I need to retrieve a distinct value from my initial query and place this in the header or group row.The detail lines are hidden but may be expanded(shown).I then have another group row in which I require the sum of all distinct values from my previous group row.To explain pictorially I have the following:
-Scroll right to see the pink squares.Note that the total in the pink square is the sum of the individual var3 values distinct so 10 even when var3 =4 in euro currency.
-I have tried using sum(var5) but this will give the incorrect value as it sums all detail lines not just the distinct values.
-I have tried using another dataset but when referenced the grouping behaviour expected is non existent so where I expect 40 I get 80 i.e. sum disregarding values of var1 and var2 although these are the grouping variables.
-I need it to be dynamic so I am unable to use IIF(...).
If I could get var4 or var6 to be the totals I require I could work with that.I have also tried the following custom code:
Dim public unitLimit as Double
Public Function Getcpvalue(ByVal limit_amount1 AS Double) AS Double
unitLimit = unitLimit+ limit_amount1
return limit_amount1
End Function
[code]...
I have 2 datasets, dataseta is a list of tickets and their relevant owner and databsetb is a list of owners and a days worked first against them.I have a table with a detail grouping on ticketid and a normal grouping on owner which works well... all straight forward to this point. In this table on the owner grouping level I also have a lookup to datasetb which pulls back the days worked per owner which works fine as well. But what I now need to do is total the days worked over all owners, which sounds simple but doesn't work. This is the expression on the days worked for each owner -
=lookup (Fields!owner. Value, Fields!owner.Value, Fields!Days_worked.Value,"datasetb")
If I add a sum around this then it uses the figure above but multiplies it by the amount of tickets in the detail grouping.
I have a report which is redirecting to a subreport. The main report is having multi value parameter. I need to pass these multi values to sub report. Passing parameters from MDX report to T-sql report. So, I'm using the below exp.
=SPLIT(REPLACE(TRIM(Join(Parameters!Grade.Label,",")),", ",","),",")
The value will look like this
01-Manger
02-Senior Mange
21-Associate
25-Associate Trainee
This is working for me in all the cases except one. In all other cases, the parameter's Label and Value field has same data in the sub report. But, in a specific parameter I'm getting Label and Value data are different. I'm getting an alpha numeric string value from MDX report , but I need to pass only the numeric values to the sub report since its value field contains only numeric value. The numeric value is coming at the starting of the string data. So I have used Mid()
=SPLIT(Mid(REPLACE(TRIM(Join(Parameters!Grade.Label,",")),",
",","),1,2),",")
Result will be 01
But, mid() will give only the first value. It is working for single value. But I need to extract multiple values.
I have integrated sharepoint list data to SQL Server reporting services. I am using the below to query sharepoint list data using sql reporting services.
<Query> <SoapAction>http://schemas.microsoft.com/sharepoint/soap/GetListItems</SoapAction>
<Method Namespace="http://schemas.microsoft.com/sharepoint/soap/" Name="GetListItems">
<Parameters> <Parameter Name="listName">
[Code] .....
By using this query, I am getting a dataset which includes all the columns of sharepoint list. Among these columns, I wanted to display only 2 columns (i.e Region and Sales type) using chart. I have created a Region parameter but when I click preview, the drop down box is giving me all the repeatative values of region like
RG1,RG1,RG1,RG2,RG2,RG2,RG2,RG3..........
I wanted to display only distinct values of Region parameter so that whenever end user select region from the parameter drop down, it will display the respective value of Sales type column.Also when I select only RG1 parameter, it is giving me a chart including the sales type of all the Regions. (it should display me only the sales type of RG1) How can I link these 2 columns so that they will display the values respectively.
In an existing SSRS 2012 report, I have a requirement for a user to be able to select by multiple school(s) and/or multiple grade(s). This is fine except certain schools like elementary have grade levels of KG to 06, Middle school has grades of 06 to 09 and high school has grades of 10 to 12. Thus for example, if a user has initially selected grades 11 and 12 and then they select an elementary school that has grades KG through 06, the 'grade level' selection would need to change.In other words, I am thinking of initially having the available and default values for the parameter called 'Grade' set to KG through 12. However if a school is selected that only has specific grade levels like elementary school, how can I override the original grade level and only allow the user to select grades that the particular school contains?
View 3 Replies View RelatedI am using SSRS 2014. I'm using a matrix instead of a tablix because it allows me to have dynamic columns. In the example I'm showing, two of the columns use the sum function to get the total counts per practice. The third column contains percentages so I averaged for the total but the value is inaccurate compared to the value I would get if the divided the the two totals that are sums of the counts. Is there a way for me to specify that I want to divide the total counts numerator divided by the total counts denominator?
Here's an example report output with the percentage column averaged (inaccurate):
PCP numerator denominator percentage
John Smith 66 104 63.46
Tom Jones 4 36 11.11
.
.
.
Jane Doe 1 1 100
Total 708 1005 72.3
So the 72.3 value is from Avg(metricvalue)
I would like to do this instead: % total = 708/1005, which equals 70.5 - a significant difference.
The metricvalue column is what is the value for every number above (Because it's a matrix).
In My cube I have :
A Fact table <<Company Revenue>>
2 Dimension <<Month.Dim>> , <<Company>>
I have 4 company say (A,B,C,D) but i have record for only company A & D that too only for December month .
When I create a SSRS report out of the cube i want a matrix where all the company names to be displayed in the rows & all the months in the columns and company's revenue in data
What my report is displaying :
Company | December
-------------------------------------------------------
A | 20000
-------------------------------------------------------
D | 3900
-------------------------------------------------------
what is needed :
Company | January | February | March | ........... | December
-----------------------------------------------------------------------------------
A | | | | | 20000
----------------------------------------------------------------------------------
B | | | | |
----------------------------------------------------------------------------------
C | | | | |
----------------------------------------------------------------------------------
D | | | | | 3900
-----------------------------------------------------------------------------------
How do i achieve this either in SSAS or SSAS.
I have a requirement to display the total of a Group after subtracting a specific value from the same Group.
Example: Say the below data is grouped on a particular column
Group Values Month
Jan-15 Feb-15 Mar-15
A 10 20 30
B 5 10 25
C 1 2 3
D 5 10 15
Total 11 22 33
Formula is : Sum(A+C+D)- Sum(B)
What is the best way to Group the above scenario from SSRS level and display the result as shown above. I am able to display all the values except the last total row where am displaying the complete total i.e. 21 42 73.
How do I dynamically subtract the values for row B which is one of the group values.
In my SSRS report i have a date parameter and i want to set to it a default value with a complicated logic. I arrived at this strange behaviour:
Today is May 6th, wednesday. If i use the following expression:
DateAdd("d",Weekday(Today(),DayOfWeek.Sunday),Today())
for the default time picker I get May 9th. If I use exactly the same expression in a textbox in the same report
DateAdd("d",Weekday(Today(),DayOfWeek.Sunday),Today()).ToLongDateString()
I get May 10th! The only thing that changes is the toString. Why are the two values different? I tried with different expressions and the difference arises when i start using Weekday(Today(), somevalue).
The result of Weekday should be independent from regional settings as I am forcing Sunday to be the first day of the week, right?
MS SQL Server 2008 R2
I have both positive and negative values in a single column, where I want sum total of positive values & negative values. Is there any Expression for this to sort out.
I am creating a SSRS report using a SSAS cube as it data source. The user would like to select multiple values from a reporting parameter that is then used as a filter on the MDX statement. I am bale to have the report work successfully when only one value is selected but not when multiple values are selected; the report uses only the first value from the reporting parameter when it contains multiple values. How do I filter an MDX query using a SSRS report parameter with multiple values?
View 3 Replies View RelatedI am using the below expression for hidding the zero data labels in ssrs chart.=IIF(Fields!Name.Value=0,False,True). But this expression is working for some other charts. It is not wrking for only charts. I could not find the solution for that. How to hide the zero values.
View 4 Replies View RelatedAm using SQL Server 2012 and Visual Studio 2010.
The above chart has three Values in it (slightly late in pink, rather late in hot pink and very late in red). Because of the ordering of these values the red very late values can't be seen. When I shuffle the order around slightly they are indeed there:
...This report runs dynamically for one of a number of activities the user can select, as such I have no way of knowing which of these series will be at the lower end of the scale and which will be at the higher end. Is it possible to set the Values/Series to be transparent so I can be assured that all will be visible to the user at runtime?
I am trying to develop a report from cube,and it has one drill through report.when i click on sales amount field on main report,then it open the drill through report with details.Here i passed the **(category,subcat,product)parameters(Cascaded)** to drill through report in action part of main report.In my main report i have two columns .
columns are **Level** and **Salesamount**.
Values are like
**[-]category** **100**
**[-]subcat** **50**
**product** **30**
when i click on 100, parameters are passed & it open the detail report correctly, but when i click on 50,the values for subcat parameter is not getting values in detail report and same as the product also.
Here i used the expressions in parameter values
**pCategory**----iif(inscope(category),!fields.category.value,split(join(Parameters!category.value,","),","))
**psubcat**----iif(inscope(subcat),!fields.subcat.value,split(join(Parameters!subcat.value,","),","))
**pproduct**----iif(inscope(product),!fields.product.value,split(join(Parameters!product.value,","),","))
I am creating matrix report with grouping on WEEK and Fiscalyearweek,I need to calculate of difference between FY14W01,FY15W01 ande percentage of those..how to calculate in ssrs level.
View 13 Replies View RelatedThere is a multi value parameter called "include" in the report where "Allow Multiple Values" is checked and it has 4 Available values as shown in the attached screen shots and preview of the report is also shown .There is no data set for this parameter and the values will get displayed on the report based on the visibility condition set in the report.Example : If first value is selected then 1 is passed and based on the visibility condition set in the report - the report output is displayed.None is default value and has value 4 and when the report is run with this option i.e. "None" then rest three parameter values are not applicable .
Requirement :
-When the end user selects (Select All) Check box then (None)
-check box must be disabled or must not appear for selection for the end user
-When the end user selects check boxes either of the first three except None then also None check box must be disabled or must not appear for -selection for the end user
-when the end user selects a combination of first three then also None check box must be disabled or must not appear for selection for the end user
-The None is set as default with a value as 4 and is applicable only when the user does not select either of the first three values and the report will run.
Currently we are using Custom Delivery Extension for SSRS 2008R2 We are planning to move it SSRS2012
My Question is: Whether we can use the same Code used for SSRS2008R2 to SSRS2012?
if not what code changes we should do?
public Sub Main()
Dim url, destination As String
destination = Dts.Variables("report_destination").Value.ToString + "" + "Report_" + Format(Now, "yyyyMMdd") + ".xls"
url = "http://localhost/ReportServer?/ssis_resport_execution/ssis_ssrs_report&rs:Command=Render&ProductID=" + Dts.Variables("ProductID").Value.ToString + "&user_id" + Dts.Variables("user_id").Value.ToString
+ "&rs:Format=EXCEL"
SaveFile(url, destination)
Dts.TaskResult = ScriptResults.Success
End Sub
How to pass more than one variable values in ssis as parameter values to ssrs. With the above code its showing as empty.If i am taking single variable i am able to render the data into excel sheet.
Is there any way to get the report toolbar using SOAP Api in SSRS reporting.
View 6 Replies View RelatedI am creating a drill through that will go out and find the correctreport out of 27 that equal my 2 parameters NAME_ID and DETAIL_ID.Does anyone out there have any ideas for me? I can make it conect to 1report. I do not know how to make it search for the correct report
View 1 Replies View RelatedHello,My boss wants me to create a front end webpage for our ReportingServices reports that customers can log onto through a webform. I'm aPHP programmer, so I'd rather do this site and the authentication inPHP than learn .NET. The main problem I see is finding a way to passthe authentication to Reporting Services so that when a user runs areport, they are not asked to enter their password a second time.I don't even know where to start researching this problem... I've askedin PHP forums and they passed me to you guys. Any ideas?Andrew
View 3 Replies View Related