Reporting Services :: Printing Reports With Microsoft Edge
Aug 3, 2015I can't print reports using Microsoft Edge from Windows 10 With IE 11 Works fine.I've tried regsvr32 with rsclientprint64.dll but it's not working.
View 8 RepliesI can't print reports using Microsoft Edge from Windows 10 With IE 11 Works fine.I've tried regsvr32 with rsclientprint64.dll but it's not working.
View 8 RepliesWhen I try to open the Powerview report in the new Windows 10 Explorer (MS Edge), I am asked to install Silverlight.
When I try to install this, it says I already have it installed so I can’t proceed in opening the Powerview report.
I must confess it has been a long time since I have done any SSRS reporting. I have the following SQL Statement (I will change it to a stored Procedure with parameters once I get the design done):
SELECT
rc.wo_id,
rc.process_id,
rc.item_id,
rc.lot_no AS full_lot_no,
rc.oper_id, rc.seq_no,
CAST(la.attr_value AS DECIMAL(12, 2)) AS weight,
[Code] ....
This gives me the data I want which looks like this:
Rework ID Ingot Oper ID Piece Rework
28 xxxxxx14 5 M88 Route 1
55 xxxxxxx15 5 B106 Route 2
79 xxxxxxx19 5 M68 Route 3
164 xxxxxx234 5 T16 Route 4
xxxxxx234 5 B82 Route 4
The grouping is on the Rework ID. Any of the pieces can be put on any rework route. As you can see, there are 4 routes, but 5 pieces. What I need is for each rework ID to be printed on its own paper even if there is only 1 record for the route. So I would expect 4 pieces of paper, 3 with 1 record, the 4th with two pieces. Is there a setting in the Tablix or report that I can set, or is there an expression I can use?
Just upgraded to Windows 10. My SSRS reports, SharePoint 2013 integrated, still work but have no scroll bars. I can use the touchscreen to scroll left and right. Mouse wheel or any other attempts to scroll the report view don't work.
View 4 Replies View RelatedPlease Help!!!
We have never been able to get the printing to work on any of our reports using SQL Server Reporting Services 2005 SP2 in our production environment. Without this feature of printing a report, we cannot go live with SSRS at all.
We have tried adding the SP2 after a clean install on a new server -- yet we still have this problem.
I read a few some posts about uninstall the old ActiveX control used for printing, so I did this and installed the new
one but that didn't help either.
We can print to files without issue - only when we try to print to a real printer does it hang forever.
It doesn't matter how big the report is, 100 pages or 1/4 of a page, same problem.
We do the following:
1) Run the report
2) Click the print button
3) Select a printer and press ok
4) "Printing Now..." dialog box appears
5) "Print Error" dialog appears and never goes away - and nothing is printed out.
Have to close IE and crash the report session to get out of it.
This is the result on every client computer we have ever used in trying to access
the report server.
It also hangs in running a Print Preview for all reports.
We are printing to network printers from IE6 and IE7.
Since this is on a server, we do not have a local printer to this server computer to try to print to.
Even if it worked on a local printer, this is supposed to be an enterprise solution.
Almost all of our employees print to network printers.
I am logged into my machine as a domain admin. I have no printing problems
in any program printing to any printer, except when using Reporting Services.
We are trying to print from an ASP web application which runs the reports in an iframe using URL access.
We are able to print the same reports on all of our development environments using the same ASP web application and RDL.
Again, Please help!!!
I have been working on this problem for days. I have a report that is grouped
and will be printed duplex (front and back). There is a page break after each
group. I want to ensure that the start of a new group does not end up printed
on the back side of an old group. For example:
Page 1 (printed on front side of paper): group 1
Page 2 (printed on back side of paper): more group 1
Page 3 (printed on front side of paper): more group 1
Page 4 (printed on on back side of paper): group 2 <--- This is a problem
I need:
Page 1 (front side): group 1
Page 2 (back side): more group 1
Page 3 (front side): more group 1
Page 4 (back side): <This Page Intentionally Left Blank>
Page 5 (front side): group 2
Issues that I've run into include the fact that SSRS renders the entire body
first, before rendering the header/footer. This prevents the body of the
report from knowing which page it will end up on when it is rendered (and is
also why you cannot reference Globals!PageNumber from the body).
The restriction above also prevents using a variable in custom code to know
when to generate a page break. If you set this variable in the header/footer
then the body will never see it as the entire body is rendered first and will
therefore only see the initial state of the variable.
I have seen this issue posted in a number of places,
but no one ever has a solution to this (except switching back to
Crystal Reports). Have any MVPs ever addressed this issue? I am
really hoping someone can offer a good solution or work-around.
Hello SQL Server Experts, Data Analysts, and Report Writers et al:
re: Reporting Options with SQL Server
I wanted to propose an offshoot to the pryor thread:
Would anyone take a stab at comparing Access Reports, Crystal Reports,
Cognos or other options to all the Reporting Services and its components offered as part ofSQL Server, especially as to extracting data from SQL Server into a report format?
I guess this is a far as capabilites, ease of use, limitations, and especially formatting
or presentation of the end report product?
Thank you to all, and I hope this is a beneficial discussion to others.
Hal1490
Hal9000
I have reports, set to print on Landscape and Legal ie 14 * 8.5. However, when certain users try to print the report, it prints it in Letter, even though the report is set to print in legal /landscape.
The strange part is that for most users it prints correctly in legal, only for some it is on letter. Any idea why this would happen?
One of the users is trying to print a report, in SQL RS 2000, He gets the foll err:
Error Loading resource String. (0*000000000)
He has a Windows 2000 professional version.
Any idea on how to fix this err? For the other users it works just fine.
I want to be able to grant the ability to print and export reports in Report Manager to individual users or a group of users. I know I can disable or enable printing and exporting for all users. What I would like to do is create user groups and place everyone who needs to ability to print or export into those groups.
View 1 Replies View RelatedI am running SQL 2000 SP4 with Reporting Services 2000 SP2. Reporting services hangs when I try to print reports. The reports render okay, and when I click on the print icon, I get the appropriate dialog box. Once I click "OK", I get the "Printing..." dialog that says "Printing Now...", but it never prints, and the window eventually stops responding. As far as I am aware, no changes have been made to the server, and it was working fine approximately 10 days ago. Below is the contents of my RS Client Print Log (%Temp%LOG56.tmp):
CRSClientPrint::Print - Starting Function.
reportServerUrl = http://reportsrv/ReportServer
reportPath = %2fEngineering%2fRamz+-+Development%2fDEV_Reports%2fContract_Project_By_State&ContractStateDesc=Active
reportName = Contract_Project_By_State
CResourceManager::SetLocaleInfo - Starting Function.
SetUICulture - Starting Function.
Attempted UI LCID = 9
Using UI LCID = 1033
SetUICulture - Ending Function.
CResourceManager::LoadResourceDLL - Starting Function.
CResourceManager::LoadResourceDLL - Ending Function: 0x00000000.
CResourceManager::CanUseCurrentLocale - Starting Function.
CResourceManager::CanUseCurrentLocale - Ending Function.
CResourceManager::LoadGDIPlus - Starting Function.
CResourceManager::LoadGDIPlus - Ending Function: 0x00000000.
Attempted culture = 1033
Using culture = 1033
Culture name = English_United States.1252
CResourceManager::SetLocaleInfo - Ending Function: 0x00000000.
CPrintDlg::Print - Starting Function.
CPrintDlg::InitializePrintDlg - Starting Function.
CPrintDlg::GetDefaultPrinterName - Starting Function.
CPrintDlg::GetDefaultPrinterName - Ending Function: 0x00000000.
CPrintDlg::SetPrinterPaperSize - Starting Function.
CPrintDlg::SetPrinterPaperSize - Ending Function: 0x00000000.
CPrintDlg::InitializePrintDlg - Ending Function: 0x00000000.
CReport::SetReportName - Starting Function.
CReport::SetReportName - Ending Function: 0x00000000.
CPrintDlg::PrintReportPages - Starting Function.
CCancelDlg::StartDialog - Starting Function.
CCancelDlg::StartDialog - Ending Function: 0x00000000.
CReport::Fetch - Starting Function.
CReport::ComparePrintInfo - Starting Function.
Value of diff = 2
CReport::ComparePrintInfo - Ending Function.
CReport::ClearPages - Starting Function.
CReport::ClearFetchedPages - Starting Function.
CReport::ClearFetchedPages - Ending Function.
CReport::ClearPages - Ending Function.
CReport::ResetNextFetch - Starting Function.
Next Fetch set to 1
CReport::ResetNextFetch - Ending Function.
CReport::StartFetchThread - Starting Function.
CReport::GetPageToFetch - Starting Function.
Page to fetch = 1
CReport::GetPageToFetch - Ending Function.
CReport::StartFetchThread - Ending Function: 0x00000000.
CReport::Fetch - Ending Function: 0x00000000.
CReport::GetPage - Starting Function.
Page = 1
CReport::GetPageWrapper - Starting Function.
Page wrapper = 0x00000000
CReport::GetPageWrapper - Ending Function.
CReport::FetchThreadMain - Starting Function.
CReport::GetPageToFetch - Starting Function.
Page to fetch = 1
CReport::GetPageToFetch - Ending Function.
CReport::FetchAllPages - Starting Function.
CReport::PerformFetch - Starting Function.
CReport::GetPaperSize - Starting Function.
Height = 8500, Width = 11000 IsMM = 0
CReport::GetPaperSize - Ending Function.
CResourceManager::SetInvariantCulture - Starting Function.
CResourceManager::SetInvariantCulture - Ending Function: 0x00000000.
CResourceManager::ResetCulture - Starting Function.
CResourceManager::ResetCulture - Ending Function: 0x00000000.
Url = http://reportsrv/ReportServer?%2fEngineering%2fRamz+-+Development%2fDEV_Reports%2fContract_Project_By_State&ContractStateDesc=Active&rs:Command=Render&rs:format=IMAGE&rc:OutputFormat=emf&rc:StartPage=1&rc:EndPage=65535&rc:PageWidth=11.0in&rc:PageHeight=8.500in&rc:MarginTop=6.350mm&rc:MarginBottom=6.350mm&rc:MarginLeft=6.350mm&rc:MarginRight=6.350mm&rs:PersistStreams=True
Can anyone give me any ideas as to how to troubleshoot this issue?
I have a report that is a little wide, and when I export it to an Excel file it spans about 2 pages. I have it set to an 8.5 height and 11 width for printing in landscape on normal-sized paper. But is there a way to make sure that the report exports with the printing page break covering the entire width so that the report prints only one page across? The users don't want to resize in Excel before printing.
View 3 Replies View RelatedWe have SSRS reports hosted on a terminal server. When user clicks PRINT button, there is a prompt "Printing is not available. Verify that ActiveX is enabled,..." When logs on as Admin, we can install this ActiveX, however normal users won't have the privilege.
View 8 Replies View RelatedI have a local report for which i am binding the Dataset dynamically. I am trying to print this report using a seperate button on the page. I saw in the forums saying that the reportviewer can be converted to an EMF file, bind this to an image control and can Print this image using Javascript.
Can anyone help me with the sample code to print local report from the reportviewer (it may be in any approach.)
Thanks in advance.Sekhar T
I have an RDL report that has tables which are hidden based on expression. When I chose Run, they are appropriately hidden or visible. However, when I chose print, all tables are printed, even if they are invisible in the run version.
View 14 Replies View RelatedHello,
I am trying to print a report in landscape mode from VS 2003 from designer preview or at run time. The users don't want to change a mode manually. I tried to make width 11 or 11.5 in and height 8.5in with zero margins and 0.5in (tried a lot of combinations) - doesn't work! still printing in portrait. Please help! Thank you
I am trying to configure the reporting for TFS using SQL Server. But I get following error when viewing any report:
So I try to manually process the cube to check if it works. I am following this article: [URL] ....
When I click on GetProcessingStatus and invoke it (with last field set as TRUE) I get following error:
How to resolve this issue and be able to see the reports.
How to Add Reporting Services in Microsoft Dynamics CRM 3.0
View 8 Replies View RelatedHi,I am evaluating Microsoft Reporting Services against Business Objectsas a reporting tool against SQL Server. I am primarily a BOBJdeveloper and am finding RS not easy to use. Can anyone provide anyfeedback to the overall comparison between these 2 products as I amfinding RS frustrating and am wondering if it is just a matter ofre-adjusting and spending more time on it or if anyone else is findingRS more trickey to use than BOBJ as wellI would be extremely grateful for any feedback.Many thanks in advanceLA
View 1 Replies View RelatedHi all.
I have a Application developed on VB2005 with the reports (processed local) from Microsoft Reporting Services 2005.
I would like to know how can i use the value of a variable to be displayed on a textbox on my report.
Thanks for the help.
Best regards.
dp
I have a dataset with rows that I normally would display in a table control. I have too many columns and I would like each data row to be display on many lines. How is that possible?
View 4 Replies View RelatedI have installed and am using Reporting Services.
I can create RDL files using Visual Studio.NET, but like to offload this task to a minion who does not have VS.NET.
Is there a stripped down something-or-other to make reports that and end user or business analyst could use and then upload the reports?
Thanks.
Can anyone tell me if MS Reporting Services can import/read a Crystal Reports file as it can an Access report file?
I've seen a few posts out on other boards that there are some companies charging fees for converting Crystal Reports over to MS Reporting Services.
Is there any easier way? Are there any tools out there that can do it?
Perhaps Microsoft should produce such a tool for converting...
Thanks in advance for any help!!
Crystal reports to Reporting Services
Is there any way I can convert Crystal reports to Reporting Services instead of creating reports again in Reporting Services?
I have a Manager dashbord report.In this report 1st page contains some tables and 2nd,3rd page contains line charts with tables.Actually what we need is in 1st page tables are pretty simple,we need to add kpi's and shown these tables in kpi. kpi in ssrs and how to add kpi in ssrs reports?
View 2 Replies View RelatedWe are planning to migrate our crystal reports to reporting services, just wondering if we have cross tab reports in sql server reporting services. Thx.
View 7 Replies View RelatedI currently have a report on our Reporting Services 2005 server that takes a CompanyID as its only parameter. Also, in our database, we have a list of contacts that are linked to the CompanyID that is used in the report. What I would like to do is email a pdf or each company's report to every contact for that company in our database daily. However I am stuck on how to do that. My project is using C#, but if there is a way to do this directly through Reporting Services I could do that as well. If anyone could help me out I would greatly appreciate it. Thanks!
View 5 Replies View Related
I am using Visual Studio 2005 and trying to deploy reports to SQL Server 2000.
I get the following message:
A connection could not be made to the report server http://aklink1/reportserver.
------------------------------
ADDITIONAL INFORMATION:
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. (Microsoft.ReportingServices.Designer)
Please help!
I am getting an error message when I try to print using reporting services: "an error occurred during printing (0x80004005)"
View 4 Replies View RelatedI am trying to install Microsoft SQL Server 2005 Reporting Services, Receiving the following error
Microsoft SQL Server 2005 Reporting Services -- Error 1303. The installer has insufficient privileges to access this directory: C:Config.Msi. The installation cannot continue. Log on as administrator or contact your system administrator.
I am already logged in as Administrator and should have all the necessary permissions to install software
Please help me.
When I try to connect to the Reporting Services using Microsoft SQL Server Management Studio, the following error message propmpts up:
_____________________________________________________________
ADDITIONAL INFORMATION:
The request failed with HTTP status 401: Unauthorized. (Microsoft.SqlServer.Management.UI.RSClient)
_____________________________________________________________
Is there any settings that I need to do in the "Reporting Services Configuration Manager" ?
Thanks.
Best regards,
Michael Wu
Hi,
View 8 Replies View RelatedView 2 Replies View Related