I have a query where:
WHERE a.jobdate >=GETDATE()-1
This brings though data from today and yesterday; I understand this is because GETDATE = now.
However, all I want is to see is data from today only.
Is there any way the above query can be amended - probably not using GETDATE - so I can achieve this?
I am creating a SSRS report using a SSAS cube as it data source. The user would like to select multiple values from a reporting parameter that is then used as a filter on the MDX statement. I am bale to have the report work successfully when only one value is selected but not when multiple values are selected; the report uses only the first value from the reporting parameter when it contains multiple values. How do I filter an MDX query using a SSRS report parameter with multiple values?
View 3 Replies View RelatedI have a situation in SSRS to get the common values between the two columns where the values are sorted comma separated as below.Ex:
ColumnA : abc,cde,efg
ColumnB : cde,xyz,abc
the result in
ColumnC : cde,abc
similarly Column A and B will have n number records. I need to right an expression or the Code function to get the required result in ColumnC. I am using SharePoint Lists as Datasource. Cannot write SQL query to achieve this requirement.
I am SSRS user, We have a .net UI from where we want to pass multi select values, but these values are comma separated in the database. how can I write a sql query such that when I select multi values on my UI, the comma separated values are take care of.
View 5 Replies View RelatedWe have SharePoint list which has, say, two columns. Column A and Column B.
Column A can have three values - red, blue & green.
Column B can have four values - pen, marker, pencil & highlighter.
A typical view of list can be:
Column A - Column B
red - pen
red - pencil
red - highlighter
blue - marker
blue - pencil
green - pen
green - highlighter
red - pen
blue - pencil
blue - highlighter
blue - pencil
We are looking to create a report from SharePoint List using SSRS which has following view:
red blue green
pen 2 0 1
marker 0 1 0
pencil 1 3 0
highlighter 1 1 1
We tried Sum but not able to display in single row.
12.) Now you have two different tables - each with two columns.Table #1Single Column2 rows with a value equal to 1 and 2Table #2Single column2 rows with a value equal to 2 and 4Construct a statement returning in a single column all the valuescontained, but not the common values.This is another question that I got in an interview, I missedit.......Thanks,Tim
View 1 Replies View RelatedI have a table with 1 million records. I want to update only 400 records. The update statement is provided by a 3rd party vendor. Once i run the update statement it will update all the 400 records. Once the table is updated the users will validate the table
if the update is successful or not. What i'm looking for is:
1) Is there a way to identify what records were updated.
2) If the update done is not what the users wanted i need to undo and bring back the 400 records to their previous values.
I'm on sql server 2008.
The data source is Fetch XML - so all the values are string.I need to sum the values but getting an error:
Warning 1 [rsAggregateOfNonNumericData] The Value expression for the textrun ‘Textbox25.Paragraphs[0].TextRuns[0]’ uses a numeric aggregate function on data that is not numeric. Numeric aggregate functions (Sum, Avg, StDev, Var, StDevP, and VarP) can only aggregate numeric data.I tried converting it to INT but it returns a large number which does not match what I'm expecting.
I have row group created here on Due Month & Sales Region & added total after Due Month. When a user clicks on particular amount I would like to send the Sales Region value to the new report as Parameter. So Instead of Total text , I would like to have all the sales regions concatenated and sent to the new report. writing an expression to get the report parameter? I have added the picture of how I want the values to be concatenated , instead of Total . Is this not possible in SSRS?
View 5 Replies View RelatedI have an ssrs (report builder) with 2 dataset. the first dataset is a summary if records which the report has a column name qty and i put also a total qty summary in the last rows. the second dataset is a raw data and have a column name qty, also i put a total qty summary in the last row. The requirements is to be able to evaluate or check the total qty under dataset1 from total qty of dataset2 if equal else if not equal i have to make the font as red so that the user will inform that the total qty has a discrepancy. the users will validate from raw data which are the one items that have a missing qty. How to work on this or is this appilcable in report builder.
View 4 Replies View Related@partno is defined a multivalue parameter.when I enter a single part number or leave it empty data is properly returned.when I enter multiple part numbers data is not returned. I have tried: 604-02394, 604-03492 in the parameter prompt.I have tried entering those parts on separate lines in the parameter prompt:
604-02394
604-03492
my sql query : and (fpartno in (@Partno) or '' in (@Partno))...I only want to see those two parts in the report.
I using TOP N filter in my report to fetch top 20 Projects as per expense done.
Expression- Project_name
Operator- TOP N
value- 20
However it is not fetching the correct values. It is giving me 20 records but those are not the TOP 20.
It is missing few values from between.
I want to round 0.356 to 1? How can i do a round up in SSRS reporting services.
I am using this code:
The Sum of the Price_Call here is 0,3965 ---> I want to round it to one!
= Round ( Sum(Fields!Price_Call.Value), MidpointRounding.AwayFromZero ) --- > This is always giving me 0
I am using SQL server 2012 and Report builder 3.0 to build my report. I have build a report which product the following table
What I try to achieve is to add 2 calculated field at the bottom of the table which will represent 2 Total value based on a condition
OutTotal field should show the SUM of the Quantity only for ItemStatus=0
InTotal field should show the SUM of the Quantity only for ItemStatus=1
IMPORTANT : I cannot group my data because I need to shown them in a time Wise flow
I have try to insert the first field and define an expression but it gives an #Error. The expression I used is as below
=SUM(IIF(Fields!ItemStatus.Value = 0, Fields!ItemQuantity.Value*Fields!ItemUnitWeight.Value,0))
The Quantity filed in my table is calculated from expression Fields!ItemQuantity.Value*Fields!ItemUnitWeight.Value
I have a bubble map which contains negative values for the data field.
If I Preview a bubble map report within Visual Studio, I can get the expected result.
However, once I deploy this report I cannot get any data back from the report (see screenshot below)
Once Deployed and viewed in IE:
Why this is occurring?
Also, the data field options in the Layer Wizard are SUM and COUNT. Can these be changed?
I'm building a report that has a column in the table called countries of origin, that column can contain data like "USA","China" ( normal countries) but some rows can also contain "USA, China, Australia" ( multiple counties in one row).
I'm trying to build a filter to filter my results :
-I have a data set created with a list of all world countries
-I've Build a Parameter containing a drop down list with all countries
--- My problem is when I want to create the filter in my main data set , I can so it , but when I search for example for "USA" , I don't get the lines where there are multiple countries and "USA" is one of them...
There must be an expression in the filter that will be able to search through all the values in the string and return me my correct results.
I am having SQL query which has inner join table from another Database. The below highlighted query shows its values.
/*Trend and Capacity Report*/
SELECT MEA.DisplayName AS Cloud, MEB.DisplayName AS VM, OS.PropertyValue AS OS, CONVERT(varchar(17),PD.DateTime,113) AS Date,
VM3.VirtualCPUCount AS VCPU
FROM Perf.vPerfDaily AS PD
INNER JOIN vPerformanceRuleInstance AS PRI ON PD.PerformanceRuleInstanceRowId = PRI.PerformanceRuleInstanceRowId
INNER JOIN vPerformanceRule AS PR ON PRI.RuleRowId = PR.RuleRowId
[code]....
My request is to calculate total capacity of all available Virtual CPUs, Memory and Storage from 4 separate clouds: 'cloud1','cloud2','cloud3','cloud4'
Whenever I select =Sum(Fields!VCPU.Value) expression in Report Properties and assign it to a variable and assign that variable to a Text Box field I get the value as VCPU * (Number of VMs) which is not correct.
I am looking to get the value of VCPU from all 4 clouds above.
I am using 2 charts in my SSRS Report. Requirement is to load the Right side chart based on the click event from left chart.
I can achieve it using go to report option. But the issue is total page getting refreshed while using this option. I feel bookmark option will be the best. But I don't think I can pass a value to Bookmarks.
I have a table that contains some data.
LabelName
LabelValue
TotalForRetire
10337
dummy1
0
TotalForRelatives
5850
dummy2
0
TotalForDisability
7337
TotalForOrange
23
I have a pie chart and a bar chart.
In the pie chart I want to plot only TotalForRetire and TotalForDisability and TotalForOrange
In the bar chart I want to plot only TotalForRetire,dummy1,TotalForRelatives.
Also, here I want the horizontal axis not to show the label for dummy1 as the value is 0. How can i do that for each chart?
I am trying to build a report using SSRS.I need to retrieve a distinct value from my initial query and place this in the header or group row.The detail lines are hidden but may be expanded(shown).I then have another group row in which I require the sum of all distinct values from my previous group row.To explain pictorially I have the following:
-Scroll right to see the pink squares.Note that the total in the pink square is the sum of the individual var3 values distinct so 10 even when var3 =4 in euro currency.
-I have tried using sum(var5) but this will give the incorrect value as it sums all detail lines not just the distinct values.
-I have tried using another dataset but when referenced the grouping behaviour expected is non existent so where I expect 40 I get 80 i.e. sum disregarding values of var1 and var2 although these are the grouping variables.
-I need it to be dynamic so I am unable to use IIF(...).
If I could get var4 or var6 to be the totals I require I could work with that.I have also tried the following custom code:
Dim public unitLimit as Double
Public Function Getcpvalue(ByVal limit_amount1 AS Double) AS Double
unitLimit = unitLimit+ limit_amount1
return limit_amount1
End Function
[code]...
I am new to SSRS. I created a reporting services with 3 groups. I would like to know how to create different colors for each group so that all my values displayed by color group ?.
View 4 Replies View RelatedI have 2 datasets, dataseta is a list of tickets and their relevant owner and databsetb is a list of owners and a days worked first against them.I have a table with a detail grouping on ticketid and a normal grouping on owner which works well... all straight forward to this point. In this table on the owner grouping level I also have a lookup to datasetb which pulls back the days worked per owner which works fine as well. But what I now need to do is total the days worked over all owners, which sounds simple but doesn't work. This is the expression on the days worked for each owner -
=lookup (Fields!owner. Value, Fields!owner.Value, Fields!Days_worked.Value,"datasetb")
If I add a sum around this then it uses the figure above but multiplies it by the amount of tickets in the detail grouping.
Hi all
I have two cells,having first cell 0 and other cell 5.
How can i add these two cell values.
I used following expression
=Fields!LITMIN.Value + Fields!NUMMIN.Value
But i am getting Concatenated result ie:05
But i need 5.
How can i do it.Pls help me
What I want to do is have a matrix that looks something like this
Jan Feb March
Person A 1 ↑ 2 ↑ 3 ↑
Person B 2 ↑ 2 ↔ 2 ↔
Person C 3 ↑ 2 ↓ 1 ↓
So basically it checks the previous months value and uses that to determine which indicator to use ?
We have an SSrS report that has a tablix cell with a textbox that is a hyperlink to another SSrS report. We pass parameters to the report using the textbox properties>Action set to "Go to report" and setting the parameters to the value of a field and a parameter as shown below. We want to set action to "Go to URL" and to pass these variable parameter values in the URL. How is that done? URL....
View 2 Replies View RelatedI have done this several times before but somehow unable to make it work this time around.
select ast.AssetId, fu.ParentDescription from
dbo.asset ast
inner join tblPatchViaFU FU ON ast.AssetId = fu.Assetid
where fu.ParentFUId IN (@IMO)
In tblPatchViaFU table column [ParentFUid] is int datatype
***** Dataset for Parameter "IMO" ******
SELECT DISTINCT
ParentFUId ParentFUId
, ParentDescription IMOfficer
FROM
[dbo].[tblPatchViaFU]
WHERE
ParentName = 'Income Patch'
***** @IMO Parameter ******
Datatype : Integer
Allow multiple values
Available Values
Dataset : IMO
Value Field : ParentFUId
Label Field : IMOfficer
The report runs perfectly fine for 1 parameter value but the moment I select more than one it fails with the error message "Error converting data type nvarchar to int."
How do I suppress duplicate values from being displayed on a report data region? Is there an option to suppress duplicates and where is it?
In my report I am having one calculation filed, in that field I want to display only two values before decimal point.
For example, if I am having calculation field value as 3456.54, I need to display as 35.54 or 34.54.
Running into a problem with trying to pull multiple values in a stored procedure.
Ran Profiler for trace on what variable is coming back as when running in Reporting Services.
Profiler shows this:
exec apGetCompanysByRep @Product = N'Absorbent Pads,Airedale Terrier'
Trying to run Replace function but not quite getting the syntaxt correct. The stored procedure will work but when running report will often get unclosed quotation marks.
What I have:
Set @Product=
Replace(@Product, '''' + ',' + @product + '''', (@Product + '''' + ',' + ' ' + '''' + @product + ''''))
This is probably a little too much coding but I've tried several ways.
In the SP the code is as follows:
CREATE PROCEDURE [dbo].[apGetCompanysByRep]
@Magazine varchar(6) = null
, @DirectsMagazine varchar(6) = null
, @Category varchar(50) = null
, @SubCategory varchar(50) = null
--, @FirstName varchar(30)
, @LastName varchar(30)= null
, @Product varchar(1100)
AS
declare @SQL varchar(2000)
Set @Product=Replace(@Product, '''' + ',' + @product + '''', (@Product + '''' + ',' + ' ' + '''' + @product + ''''))
set @SQL = '
Thanks for any assistance anyone can give.
I have a requirement for the following SSRS expression ( I am using Report Builder 3.0). The end user will input a selection via a mutli select parameter (financial month/s), if all month are inputted then sum(Field1.Month1.value...Field12.Month12.value )/12 * 100 else if parameter.value =1 then sum(field/s.values for selected month)/1 *100 else if month.values = 1 AND 2 then sum(field/s.values for selected month)/2 *100 and so on for any combination of the selected inputs.
Put in simpler terms I would like to calculate a percentage from a field/s containing relevent values, based on month/s the user inputs.
Can we build a report like the one shown above . Basically the columns will be on vertical columns and values of the columns will be next to it ? I know there is matirx control but it is for multiple columns .
In business objects we have separate control for this but in ssrs we have 1 table control and another matrix control. I think i need to modify matrix control to achieve it...
I have a report which is redirecting to a subreport. The main report is having multi value parameter. I need to pass these multi values to sub report. Passing parameters from MDX report to T-sql report. So, I'm using the below exp.
=SPLIT(REPLACE(TRIM(Join(Parameters!Grade.Label,",")),", ",","),",")
The value will look like this
01-Manger
02-Senior Mange
21-Associate
25-Associate Trainee
This is working for me in all the cases except one. In all other cases, the parameter's Label and Value field has same data in the sub report. But, in a specific parameter I'm getting Label and Value data are different. I'm getting an alpha numeric string value from MDX report , but I need to pass only the numeric values to the sub report since its value field contains only numeric value. The numeric value is coming at the starting of the string data. So I have used Mid()
=SPLIT(Mid(REPLACE(TRIM(Join(Parameters!Grade.Label,",")),",
",","),1,2),",")
Result will be 01
But, mid() will give only the first value. It is working for single value. But I need to extract multiple values.
Create report with SharePoint list. Columns are displaying on the report I used out of the group SUM function and it is group by report. one group total is showing correct total and other groups are showing wrong total and showing too much big value even there is whole column is empty.where value is not in column I am using "-" with IIF function. these columns are calculating by using date difference function between two date columns. these values coming with minus value . so ABS function is also using.
Columns calculation expression:
=IIF(ISNOTHING(Fields!DateCAPackage.Value)
OR (ISNOTHING(Fields!Date_CA_Application.Value)) ,
"-" , CINT(Abs(DateDiff("d",Fields!Date_CA_Application.Value,Fields!DateCAPackage.Value))))
Total calculation expression:
=Sum(ABS(DateDiff(
"d",Fields!Date_CA_Application.Value,Fields!DateCAPackage.Value)))