Reporting Services Reinstallation Problem
Jul 26, 2004
Somehow i messed up some IIS settings for Reporting Services and had to uninstall and reinstall Reporting Services. When reinstalling it, i get warnings about existing Report Server and tempReportServer database so i removed those 2 databases from SQL Server 2000. At the end of the installation, another warning popped up saying I need to initialize the report server manually. I ran rsconfig and rsactivate to initialize the report server. Now i get a no page found error when load http://localhost/reports. I can't seem to get any good documentation on the web for reporting services since it's fairly new. Please help.
View 4 Replies
ADVERTISEMENT
Jul 25, 2000
I am a newcomer for SQL Server. Yesterday my NT was down, and had to be reinstalled. Therefore SQL Server 7 used has to been reinstalled too. Though old data files for SQL Server still exists, however, reinstalled SQL Server 7 cannot use them directly. I just wonder if there are any method or utility that are able to recover those previous data? Thanks very much in advance.
View 1 Replies
View Related
Jan 10, 2008
Hi there,
I've had BIDS installed on the first partition (C in the standard location. Since the space has run low, the admin has un- and reinstalled BIDS on the similar location on another partition (D.
The problem is, that when I open VS I can see "Integration Service" as a known module on the splash screen (even in the Help->About dialog), but when I try to open a solution with an SSIS project (dtproj) an error dialog occurs with the message that this project type is not supported.
The user who installed BIDS does not run into my problems! So I've tried to run devenv /ResetSettings which didn't make it right, so I'm a little messed up.
Any ideas?
THX
Fridtjof
View 4 Replies
View Related
Mar 22, 2008
Hello,
I am trying to migrate my reports from SQL server 2000 reporting services 32bit to 2005 64bit. I am following the migration steps that MS specified.
Restored my Reportserver and ReportserverTempDB databases
Then I was using the configure Report services to upgrade these databases but I always end up getting the follwoing exception when I run the upgrade on the "Database Setup" configuration for 'ReportServerTempDB' database
System.Data.SqlClient.SqlException: Could not locate entry in sysdatabases for database 'ReportServerTempDBTempDB'. No entry found with that name. Make sure that the name is entered correctly.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Common.DBUtils.ApplyScript(String connectionString, String script)
at ReportServicesConfigUI.SqlClientTools.SqlTools.ApplyScript(String connectionString, String script)
It's driving me crazy, why is it looking for 'ReportServerTempDBTempDB' in the catalog instead of 'ReportServerTempDB'?
Is it possible to migrate from 32bit to 64bit?
Any help is appreciated
View 1 Replies
View Related
Dec 6, 2006
I'm attempting to obtain a cost effective solution for my existing customers to develop reports on their SQL 2000 Server installations using their Reporting Services 2000. With products like Visual Basic.NET 2003 becoming almost impossible to obtain, I have at least one customer who is running into a dead end.
One option possibly is the SQL Express with Advanced Services download, which has Reporting Services. My questions are as follows:
Can the report designer component of SQL Express Reporting Services be configured to connect to an external database (which would happen to be a SQL 2000 database) to establish its datasets?
Does the resultant designed report end up in an RDL file? If the customer published this report via the Reporting Services 2000 Report Manager, would the report be able to run?
Sorry for asking a question like this that I could probably answer on my own, but my customer needed this answer yesterday. I have scoured the web and microsoft sites - and posted a question on the official SQL Reporting Services cateogy ... in an attempt to answer the basic question of how to design reports for Reporting Services 2000 in the absence of Visual Basic.NET 2003 (or other .NET 2003 tools) with no success.
Thanks to anyone who can help.
-- Mark
View 1 Replies
View Related
Jul 27, 2015
I work in a big project and we will begin in using reporting services as the base technique for reports and I will be responsible for this part. but I have a problem I will discuss in the following:
Currently: We use currently devexpress reports and we have 2 languages(Arabic and English). the data in tables saved in two ways (Arabic and English). when the end user change the language of the web site the report data language changed when run it.
Example:
we have table with (ID, NAME_AR, NAME_EN, JobTitle_AR, JobTitle_EN). designed report will display(ID, NAME_EN, JobTitle_EN) . but the end user change the language of the system the report will
dispaly(ID, NAME_AR, JobTitle_AR)
Hint:this done pragmatically
how to do this in reporting services.
View 7 Replies
View Related
Mar 12, 2007
Hi There,
Our DBA has installed reporting services on a server and now in order to access the report manager, one has to be an Admin on that Server. I am guessing that there is a mistake in the configuration of Reporting Services. Usually it should allow anybody who was added to the roles in the properties section of the Report Manager, right? I have also added the users to the DB..
Also I am using Windows Authentication to access Report Catalog items (Reporting Services is installed on Server2) from a web Application(deployed on Server1) and displaying the report using report viewer. For some reason, server1 has to be in an Admin role on Server2 to access the report catalog/report. This is kinda strange for me as I don't want everybody to be an Admin on Server2. Can anybody please point in the right direction?
Thanks.
View 3 Replies
View Related
Sep 11, 2015
We have installed SQL Server 2005 with reporting services.When tried to open getting errors as below: how to avoid such errors See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
ReportServicesConfigUI.WMIProvider.WMIProviderException: A WMI error has occurred and no additional error information is available. ---> System.Runtime.InteropServices.COMException (0x8000000A)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
[code]...
View 4 Replies
View Related
May 14, 2008
Hi all,
I have some problem about reporting service add-in.
After I install reporting service add-in for SharePoint, reporting service menu does not appear in Application Management Tab in SharePoint Central Administration.
I try to uninstall and re-install again, it remain not work.
How can I solve this problem?
Thank you very much.
View 4 Replies
View Related
Nov 3, 2015
Is there any way to get the report toolbar using SOAP Api in SSRS reporting.
View 6 Replies
View Related
Jun 19, 2015
We've got a requirement to build the real time report. user can browse report at any point of time and need to see the latest data(stock market) in the report.
I've few options down...
1. Directly point to OLTP database as source and write stored procedure to show result set.
2. Replicate the database and write the SP's to reports. To avoid pointing directly to OLTP db.
3. To build the datawarehouse with dim & facts to show it in reports. I prefer this as a standard method, but this would have some latency depending on trasaction load which will differ from the requirement.
View 3 Replies
View Related
Jan 15, 2007
HI There
We are required to gather certain information regarding reporting services.
Which reports were requested, by whom , how long did they run for, what parameters were passed etc etc.
I see that the system tables do provide some of this information, is there a 3rd party tool or something we can use to gather all this type of information for us?
This is for reporting services 2000 and 2005.
Thanx
View 1 Replies
View Related
Mar 23, 2007
Hi,
I have just install SQL 2005 SP2 and trying to get Window SharePoint Services V3 integrated with SQL 2005 SP2 reporting services.
In SharePoint Central Administration, I select the Reporting Services Integration page and have setup the Report Server Web Service URL and Authentication Mode. I then goto Grant database access, specify the SQL server name, get promted for a username and password that has access SQL Reportserver and get the following error "The group name could not be found"
Does anyone have any ideas?
Thanks
View 5 Replies
View Related
Jul 23, 2010
We built our prod server [vm] with SQL Server 2008 R2 on Server 2008 R2. It works nicely. Then we made a copy of the VM and renamed it (so our test environment would be IDENTICAL to production). After that, SSRS was broken: I get "HTTP Error 503. The service is unavailable." I can't connect via http, or SSMS.
We have tried:
* Running SSRS config tool (several times)
* Running with/without the IIS Server Role
* Dropping & recreating the SSRS keys
* Recreating the ReportServer database, etc
* Checking all of the accounts, permissions, etc
* Running SQL Repair
* Going through the registry to fix any references to the machine's old name
* Uninstalling, reinstalling SSRS
* Completely uninstalling ALL of the parts of SQL Server 2008 R2, deleting all directories, removing references to SQL Server from the registry, rebooting, reinstalling everything.
None of this has worked. SSRS [R2] is still 503 on our test box.
the SSRS [NT] service seems to run, without error. The Event Viewer doesn't seem to be recording any errors. The SSRS logs say that the default URL is wrong, but we get the same error in Prod, and Prod works fine. The other SQL Logs say something about not being able to contact the service. However, as I said, the [NT] service seems to be working fine.
View 4 Replies
View Related
Dec 3, 2006
I think I've seen a similar post on a blog or on the forums - but it seems like this should be possible -
I have an MDX query - that works fine in SQL Enterprise Manager, and has my dimension members on columns, and my measures on the rows. When I try the same query in Reporting Services, I get the error:
"The query cannot be prepared: The query must have at least one axis. The first axis of the query should not have multiple hierarchies, nor should it reference any dimension other than the Measures dimension..
Parameter name: mdx (MDXQueryGenerator)"
Although it works when you pivot the view, I really need my data presented with the members on the columns and the measures on the rows. Another forum post mentioned using the SQL 9.0 driver, but I can't see this listed anywhere (the only one I see is the .NET framework Data Provider for Microsoft Analysis Services).
Here's what my query looks like -
SELECT
{ [Time].[Month].&[2006-09-01T00:00:00] ,
[Time].[Month].&[2006-10-01T00:00:00],
[Time].[Month].&[2006-11-01T00:00:00],
[Time].[Month].&[2006-12-01T00:00:00]
} on COLUMNS,
{
[Measures].[Unique Users],
[Measures].[UU Pct 1],
[Measures].[UU Pct 2],
} ON ROWS
FROM [Cube]
Any ideas?
Thanks,
Arjun
View 8 Replies
View Related
Sep 16, 2007
Hi All,
I'm trying to create reports in RS2005 using AS2000 as my data source. I understand that if I use RS2005 on AS2000, I wont be able to enjoy the OLAP based parameters as in using AS2005. Does anyone know an easy way to easily use Parameters in RS2005 while still using AS2000?
Regards,
Joseph
View 1 Replies
View Related
Dec 19, 2006
I'm using Reporting Services 2005 SP1 and wrote some code to render reports server-side.
My sample report has few parameters that must be passed so I pass these parameters with code.
<My code>
ReportServiceExecution.ReportExecutionService rs = new ReportServiceExecution.ReportExecutionService();
rs.Credentials = System.Net.CredentialCache.DefaultCredentials;
string extension, mimeType, encoding;
ReportServiceExecution.Warning[] warnings;
string[] streamID;
ParameterValue[] parameters = new ParameterValue[2];
parameters[0] = new ParameterValue();
parameters[0].Name = "pID";
parameters[0].Value = "6548747";
parameters[1] = new ParameterValue();
parameters[1].Name = "pClass";
parameters[1].Value = "8";
ExecutionHeader header = new ExecutionHeader();
ExecutionInfo executionInfo = rs.LoadReport(reportPayslip.Name, null);
executionInfo = rs.SetExecutionParameters(parameters, "en-us");
rs.ExecutionHeaderValue = header;
rs.ExecutionHeaderValue.ExecutionID = executionInfo.ExecutionID;
byte[] report = rs.Render("PDF", "<DeviceInfo><Toolbar>False</Toolbar></DeviceInfo>", out extension, out mimeType, out encoding, out warnings, out streamID);
</My code>
Actually, I have several more parameters but I've checked the collection and all the parameters I want are there and have values. Their names match those found in executionInfo.Parameters. But when I run my code I get the following error on Render():
<Error>
"This report requires a default or user-defined value for the report parameter 'pClass'. To run or subscribe to this report, you must provide a parameter value. ---> This report requires a default or user-defined value for the report parameter 'pClass'. To run or subscribe to this report, you must provide a parameter value. ---> This report requires a default or user-defined value for the report parameter 'pClass'. To run or subscribe to this report, you must provide a parameter value."
</Error>
I've double-checked and my parameter array does have the problematic parameter, I passed it a value but when I check executionInfo.Parameters I see that it's the only parameter that hasn't been give a default value after calling SetExecutionParameters(). So my parameters do seem to be passed but one seems to refuse getting a value. If I comment out the SetExecutionParameters() line I get, as expected a similar error but on another parameter (first one in the executionInfo.Parameters collection). So I'm left to beleive that the SetExecutionParameters() has some kind of bug as it works for all but one parameter. I've checked casing, spelling, tried passing phony parameters and from what I've seen I should be getting an error when I pass the parameters if I got something wrong.
Any help would be much appreciated.
View 3 Replies
View Related
May 29, 2007
Hi,
I am invoking RS web services to render reports, using Apache Axis to generate stub classes from Reporting Service WSDL.
Please let me know if I can integrate Report Viewer control in the jsp where I am writing the report output. Else do I have to create my own custom tags simulating ReportViewer functionality.
View 4 Replies
View Related
Dec 10, 2007
My requirement for the parameter is multivalue parameter with a text box. for example when user enters aa15 it need to include product aa15. when the user enters aa15, aa16, zz15 than it needs to include all the three products. the last case is when the user enters AA** than i need to inclued all the products start with AA. when i use default multivalue parameter with data source analytical services than i am getting a drop down box. I dont want that. I need a text box where user can enter the value.
1. In sql we have a like key word to query . for example select * from product where product like "AA%".
what is equavalent mdx query to get such results ?
2.How to impliment the multivalue parameters without using dropdown box?
View 1 Replies
View Related
Aug 6, 2012
I am facing sever Refresh issue in PPS Reports. I have Two Dashboard
Dashboard_One and Dashboard_Two
I have few Filters on both the Dashboard .
In Dashboard_One I have 2 Filters
1)Year filter where Year 2012 is my Default value
2)City Filter where "CityOne" is Default Filter Value
If I select Year"2010" in Period Filter and "CityTwo" In City Filter.I see Related reports . Now I navigate to Dashboard_Two to See Other Reports where I have few Other Filter Like "Country" where I select "CountryThree" . When I navigate Back to Dashboard_one I do not see Dashboard with Default value given to them
I still see Filter value Year=2010 and CountryFilter="CountryTwo" in Dashboard Dashboard_One .. where as I should have seen it based on the Default value given to the Filter.. How should I resolve this refresh issue which I am facing in PPS Dashboard. I do not see Default value in the Filter ,It always give the filter value which was selected later when Navigated back.
View 3 Replies
View Related
Apr 24, 2015
I am trying to configure the reporting for TFS using SQL Server. But I get following error when viewing any report:
So I try to manually process the cube to check if it works. I am following this article: [URL] ....
When I click on GetProcessingStatus and invoke it (with last field set as TRUE) I get following error:
How to resolve this issue and be able to see the reports.
View 5 Replies
View Related
May 8, 2015
I started my Reporting Server and if I use the Internet Explorer as a Administrator everything works fine.But if I don't open it as an admin it calls "rsAccess Denied The user [...] does not have the permission...".Problem is that I want to run it in an SAP Program with an HTML Viewer. how I can get those Permissions ?By the way somehow I'm not able to create or change roles in the Microsoft SQL Server Management Studio.
View 5 Replies
View Related
Jul 30, 2007
Hello,
i have a small problem with the data sources in the reporting services, maybe you can clarify the situation... I have a MS CRM 3 solution with the reporting services 2005 installed. From an other vendor we have a arcplan solution on the 2000 analysis services. I would like to get access from the 2005 reporting services to the 2000 cube. Is this possible? Ive read that the SSMS cant connect to the 2000 cubes. Can i connect from the reporting services??
thank you
regards
Andreas
View 3 Replies
View Related
May 15, 2007
Hi all,
Till now all the reports for our application was created in Reporting Services 2005 with SQL Server Database(OLTP) stored procedures.
Most of the reports take 10 to 15 report Parameters and all are multi valued.
Now because of the slow response time,we have decided to use OLAP cubes data source. We have created the OLAP cube in Microsoft Analysis Services.
Can someone tell me how to use the report parameters to query the Cube.
Any links,books for reference would be of great help..
Thanks,
Looking forward to your replies
View 3 Replies
View Related
Jan 27, 2004
Hi
What is the diff between the above 2?
Thanks.
View 1 Replies
View Related
Jan 24, 2007
Setup: Reporting Services and Analysis Services are on the same server. Active Directory User. Default configuration of Reporting Services.
Problem: Reporting Server does not apply Analysis Services Role after login.
Details:
I have created a report that retreives data from the Analysis Service. I created a role and added my user company/myUserName to the role.
On the Reporting Server I set the data source to :
* Credentials supplied by the user running the report
and
Use as Windows credentials when connecting to the data source
Internally when I connect devsql2005/Reports/ReportName I get the user and password fields. When I fill them in I get the report but I can see all the data while my role was restricted to see only few results.
Can anyone suggest what may be wrong? Any articles or tutorials on how to setup and deploy solutions where Report Server is talking to Analysis Services and NOT Sql Server.
Thank You,
Pavel Hlobil
View 3 Replies
View Related
Jan 4, 2013
We are using Notification services of SQL Server 2005 in our application. The scenario is that mails will be sent to customers based on different criteria like New Invoices, Overdue Invoices, Invoices due in certain number of days, Invoices for which Amount Exceeds certain value etc. We are using two stored procedures and two tables to achieve this. One stored proc inserts/updates data related to different notifications that are selected by customers. Another stored proc inserts or updates data related to customers who created the notification.
We are now planning to upgrade from SQL 2005 to SQL server 2012. Since notification services are no longer supported in SQL 2012, we are looking for other alternatives. Which among the below would be the best alternative to replace notification services for our scenario. Also, anyny documentation or useful links which would support us in replacing notification services.
View 4 Replies
View Related
Dec 30, 2007
Hello, I understand that SQL Express Advanced Edition does not support report subscriptions. However, I have two questions:
Is there a way to run a report in a batch mode where the web ui would not show and perhaps the result of the report could be automated to export to .pdf format?
Does anyone know if SQL Express 2008 with Advanced Services will support report subscriptions, or any sort of a batch reporting capability?
Thanks in advance!
Tim
View 3 Replies
View Related
Aug 20, 2007
I have Reporting Services on one server and SQL and Analysis Services on another Server. I can develop a report using Analysis Services as the source from my local machine and it works fine. When I deploy it to the Reporting Services Server, it gives the following error:
An error has occurred during report processing.
Cannot create a connection to data source 'DataSource1'.
A connection cannot be made. Ensure that the server is running.
No connection could be made because the target machine actively refused it
Thank you in advnace for any help.
James
View 8 Replies
View Related
Sep 26, 2007
Hello
I have been working on reporting services fetching data out of Sql Server. I want to know,if there are any sites than have information on working with MS.Services and Analysis Services together.
Analysis Services is something I have no knowledge about.
Thanks
View 3 Replies
View Related
May 30, 2006
I have an important question and I've been roaming on MSDN and the internet to find a CLEAR answer. I'm really stuck here.
Is there a way to build a DYNAMIC Report with Visual Studio 2005 (SQL Server Business Intelligence Development Studio) and having a Cube (SQL Server 2005) as datasource?
I want a report that will act as the interface of the Cube browser in Analysis Services. I don't want to give access to the Cube Browser to users, but I want them to be able to drill-through the cube.
Thanks a lot.
View 1 Replies
View Related
May 26, 2015
We have SCCM 2012 primary site and Remote SQL 2012 server. Due to hardening and password reset we are facing reporting issue.
while we Open the SRS report in SQL server and try to edit the Report (Report Builder) we are getting following error due to which we are unable to configure Reporting Service point in the SCCM 2012 server. We created the New Reporting server database still we are getting the below error.
View 14 Replies
View Related
Apr 26, 2007
I am trying to learn Reporting Services using the title "MS SQL Server 2005 Reporting Services Step by Step" by Stacia Misner and Hitachi Consulting, published in 2006. I am experiencing problems with some of the exercises. I got as far as Chapter 4 when I followed directions to create a SQL statement to define a query string for a dataset. Pg 80:
select * from vProductProfitability
where year = 2003 and
MonthNumberOfYear = 1
The view vProductProfitability does not exist in the tutorial database that came with the book, rs2005sbsDW. The result of this query is the basis for the entire chapter on developing basic reports and I'm being denied a learning opportunity because the view does not exist. In short, I'm stuck.
I have tried to find somewhere at Microsoft to place this question and get some answers so I can continue thru the tutorial. To no avail. Does anyone have any suggestions?
BTW, the solution that came in the CD is also wrong because the query noted above is also in the solution.
This humble grasshopper seeks wisdom.
Respectfully Submitted,
Dave Matthews
Atlanta, GA
aka FlooseMan Dave
View 17 Replies
View Related
