Reporting Services :: Remove Duplicates Based On A Specific Column
Jun 22, 2015
I have some duplicate values for my query results, about 200 duplicates out of 30000 rows. Of these 200 duplicates I want to keep the ones that have a higher value for... 'UpdatedBatchID'.
SELECT
IR.Id as 'ID'
, CAST(IR.Priority as varchar) as 'Priority'
, IRSupportGroupDN.DisplayName as 'Support Group'
, DATEADD(MI,DATEDIFF(mi,GETUTCDATE(),GETDATE()),IR.CreatedDate) as 'Created Date'
, DATEADD(MI,DATEDIFF(mi,GETUTCDATE(),GETDATE()),IR.ResolvedDate) as 'Resolved Date'
, SLOConfig.DisplayName as 'SLO'
, DATEADD(MI,DATEDIFF(mi,GETUTCDATE(),GETDATE()),SLOFact.TargetEndDate) as 'SLO Target'
, SLOStatusDN.DisplayName as 'SLO Status'
, SLOMetric.DisplayName as 'SLO Metric'
, SLOFact.UpdatedBatchId as 'UpdatedBatchID'
View 11 Replies
ADVERTISEMENT
Apr 23, 2015
How can i perform this task with ssis OR TRANSACT SQL? I HAVE THESE ROWS WITH THE NEXT DATA, I want to take just the valid one, BUT I HAVE A LOT OF COMBINATIONS AS following names, it can be animals, things or personal names
GABRIEL OBANDO --CORRECT
GABRIEL OVANDO
Gavriel OVANDO
gAbriel OBANDO
GABRIE OBANDO
Gabri OBONDA
MANAGUA --CORRECT
NANAGUA
NAMAGUA
View 5 Replies
View Related
Nov 20, 2015
I need to hide a column just for certain values from a table like contract decorators I tried using
=IIF(Fields!MainTrade.Value = "Contracts Decorator, Bricklayer", True, False)
But it just hid the column for all values, then i tried this but it doesn't seem to work (Think it's not correct though)
=IIF(Instr("Contracts Decorator, Bricklayer","," & Fields!MainTrade.Value & ",") > 0,true , false).
Below is the table and the highlighted column i am trying to hide just for those two fields. The table has a page break so that it would be displayed on a different page for each value, but i'm not sure it is possible as i have only done it for integers and rows before.
View 16 Replies
View Related
Jun 23, 2015
I had Excel file input & import to DB Table by using Data flow in SSIS.but it had duplicates so I dont use the Dupe Records
So I planned like below:
Method 1:
Here OLEDB Destination are Good Records(Without Duplicates)
OLEDB Destination are Not Good Records(only Duplicates)
or
Method :2
If I add a column(GOOD_RECORD) in DB Table and Should I update '1' for top 1 record (for Good Record) and remaining as '0' for other Records (for Dups)latter I utilize Through flag of GOOD_RECORD
i.e.,, select * from DB_TABLE where GOOD_RECORD='1' .
I think that Method :2 Advisable for Performance/flexible but Here How can I update by using SSIS(Data flow) ????
View 4 Replies
View Related
Sep 9, 2004
Hello All,
We all were new at one point.... any help is appreciated.
Objective:
Combining two 49,000 row tables and remove records where there is only 1 column difference. (keeping the specified column value removing the one with a blank.)
Reason:
I have 2 people going through a list, coding a specific column with a single letter value. They both have different progress on each sheet. Hence I am trying to UNION them and have a result of their combined efforts without duplicates.
My progress/where I'm stuck:
Here is my first query/union:
SELECT * FROM [Eds table]
UNION SELECT * FROM [Vickis table];
As shown above, I have unioned these 2 tables and my results removed th obvious whole record duplicates, but since 1 column is different on these, a union without criteria considers them unique.....
an example of duplicates that I must remove are as follows:
142301 - Product 5000 - 150# - S (Keep)
142031 - Product 5000 - 150# - "" <--- Blank (Remove)
I am trying to run another query on my first query results so I don't mess my first query up. Here it is:
SELECT DISTINCT [Prod #], [Prod Name], [Prod Description], [Product Type]
FROM [Combined Tables]
WHERE [Product Type]<>" ";
Please Help! Thank you in advance.
--------------------
5 minutes away from pulling my last one!
BaldNAskewed
View 7 Replies
View Related
Apr 19, 2013
i have below table in DB
DB Table
ID
Column
Row data
1
Supplier CODE
1001
2
Supplier Name
ACB
3
Product
7K7
4
Price
1000
now I create one report parameter order1 IF I will give order1.value=1,2,3 then Report will come like this :--
Suppliercode
Supplier Name
Product
1001
ACB
7K7
IF I will give order1.value=3,2,1 then Report will come like this :--
Product
Supplier Name
Suppliercode
7K7
ACB
1001
IF I will give order1.value=1,3 then Report will come like this :--
Suppliercode
Product
1001
7K7
View 35 Replies
View Related
Sep 7, 2015
We have SharePoint list which has, say, two columns. Column A and Column B.
Column A can have three values - red, blue & green.
Column B can have four values - pen, marker, pencil & highlighter.
A typical view of list can be:
Column A - Column B
red - pen
red - pencil
red - highlighter
blue - marker
blue - pencil
green - pen
green - highlighter
red - pen
blue - pencil
blue - highlighter
blue - pencil
We are looking to create a report from SharePoint List using SSRS which has following view:
red blue green
pen 2 0 1
marker 0 1 0
pencil 1 3 0
highlighter 1 1 1
We tried Sum but not able to display in single row.
View 2 Replies
View Related
Nov 18, 2014
How to remove Character From Column,Just Character. I want to work with number.
View 4 Replies
View Related
Jul 28, 2015
I have a requirement where i want to delete the records based on the Date column. I have table which contain the columns like machinename ,lasthardwarescandate
I want to delete the records based on the max(Lasthardwarescandate) i.e. latest one, column where the machine name is duplicate menace it repeats. So how would i remove the duplicate machine names based on the Lasthardwarescandate column(There are multiple entries for the Lasthardwarescandate so i want to fetch the latest date column).
Note: Duplication should be removed based on “Last Hardware Scan” date.
Only latest date should be considered from multiple records for the same system. "
View 4 Replies
View Related
Nov 30, 2007
I have a results table that was created from many different sources in SSIS. I have done calculations and created derived columns in it. I am trying to figure out if there is a way to remove duplicate rows from this table without first writing it to a temp sql table and then parsing through it to remove them.
each row has a like key in a column - I would like to remove like rows keeping specific columns in the resulting row based on the data in this key field.
Ideas?
Thanks,
Ad.
View 7 Replies
View Related
Jul 28, 2015
I have a excel file which has a column called "Code" and their values are A,B,C,D,E,F,G,H. I want to create a new column called "status" based on the values of "Code".
Code:
A
B
C
D
E
F
G
H
If A,C,E,G then "status" = "Active" else if B,D,F,H then "Status" = "Inactive". I like to do it using "Derived Column".
View 4 Replies
View Related
Feb 27, 2008
I'm sure there's a way to do this, but I can't figure it out. I want to see if a field has a semi-colon in it and if it does display one thing, if not display another. But it doesn't just have a semicolon. It's a list of names, and if there is more than one name there will be a semi-colon between them.
I was hoping this would work:
=IIF(Fields!ID.Value LIKE "%;%", "yes", "no")
but it doesn't... I'm looking for something like:
=IIF(Fields!ID.Value CONTAINS ";", "yes", "no")
Any ideas?
View 4 Replies
View Related
Apr 29, 2015
I want to Set Rendering Extension Report based,
Example
Report 1 should have the rendering options of EXCEL and PDF.
Report 2 should have the rendering extension of EXCEL only.
I referred below link for change the rendering extension. [URL] .... but its for all the reports format.
View 6 Replies
View Related
Jun 15, 2015
Here's what I need to do..
1. I have a dataset with userID's
2. I want to only show the records where a userID is a member of a specific AD group,
I'm not allowed to use a linked server. I was able to make a datasource in SSDT that connects to AD, but I don't know where to begin with the dataset expression in the SSRS report.
View 7 Replies
View Related
Oct 30, 2015
I'm putting Interval 50 and Maximum 100 in Vertical Axis Property but by default 0 is coming. I unchecked mark of Always include Zero Box and Minimum is Auto. But still I'm getting 0 in Vertical Axis Chart in SSRS.
View 7 Replies
View Related
Nov 2, 2015
I'm building an invoice report in visual studio for use with MS Dynamics CRM Online. The "quantity" field I reference from the database contains a decimal number with a precision of 2 (i.e - 0.25, 0.50, 0.75, 1.00) due to how I charge my clients as they can purchase 0.25 hours of support for example.
The problem is that I also sell other items that don't require a decimal place in the quantity field and "1 x website design" would look a lot better than "1.00 x website design".
format the quantity field on my report so that it will remove the 0's and the decimal place ONLY when all the numbers after the decimal place are 0. So, to clarify:
1.00 should become 10.25 should stay as 0.250.50 should stay as 0.50 instead of it changing to 0.5 (I can live with 0.5 if 0.50 is a deal breaker.)
View 4 Replies
View Related
Jul 7, 2015
We run std 2008. In my ssrs log I see this for one of our most critical reports...
library!ReportServer_0-64!2244!07/07/2015-08:24:53:: Call to GetPermissionsAction(/somedirectory/somedirectory1).... which I assume is an indication of a report starting to render by first checking permissions.
Around the time my user says he still saw the revolving arrow and he stopped the report because he felt it was running too long, I see...
webserver!ReportServer_0-64!1dbc!07/07/2015-08:54:44:: i INFO: Processed report. Report='/somedirectory/somedirectory1/importantreport', Stream=''
How can it be true that he stopped it and ssrs reports that it processed the report?
About 4 minutes later I see this entry in the log...
webserver!ReportServer_0-64!15e4!07/07/2015-08:58:34:: i INFO: Processed report. Report='/somedirectory/somedirectory1/importantreport', Stream=''
Which processed report message is right? Could there be multiples cuz of subreports? I see a number of errors and exceptions around these same times but do not know how to tie either to a specific report. Is there a way?
View 3 Replies
View Related
Jun 1, 2015
Need to display current time in below format:
06/01/2015 at 7:00 a PST
(Date at time TimeZone)
View 2 Replies
View Related
Sep 21, 2015
I have a stacked bar chart which i notice a vertical line char. how can i removed this vertical line? I already modified the properties under smart labels under calloutlineanchor, calloutlinestyle, calloutstyle to None but still getting this vertical lines. another things is the data label as you can see in the the first column the 1.8% should be place under the gray color but its already shown before the orange color.
View 3 Replies
View Related
May 16, 2015
I have SSRS report that has around 80+ columns. I have requirement where in dynamically hideshow columns in report based on user selection. I could able to do it by setting expression for "Visiblity" property and having report parameter thro' which columns to display can be choosen.
My problem is 2 points
1. fox example if columns 2 and 4 to be hidden, then there is an empty column between 1 and 3 and 5 columns. How to avoid this
2. When i export to PDF / Excel these spaces prevail.
View 3 Replies
View Related
Dec 21, 2011
I have a dataset in my report that pulls 10 fields. One of the tablixes on report should display only 8 of the 10 fields and this is causing the duplicate records to show up on the tablix.I tried hide duplicates option for the entire details row and have set the scope to "Details". It did not work. I am getting the data from a stored procedure and cannot do much on that.
View 7 Replies
View Related
Oct 16, 2015
I created a subreport1 with tablix.I created second subreport2 that has a tablix and one column chart and both are placed in a rectangle. No page break is applied to this rectangle. When I run the sub report, both tablix and Column chart are displayed on one page .
I created a main report and added Subreport 1 and Subreport 2 in 2 different rectangles. I set page break property of Rectangle(Subreport1) to End and no page break is applied to Rectangle of Subreport2.
When I run the main report, subreport1 is displayed in one page, subreport2 is displayed in 2 different pages.
View 2 Replies
View Related
Nov 9, 2015
I am working on SSRS report deployed on the sharepoint.
By default, it is displaying " Microsoft SQL Server Reporting Services " on the report
How can that be removed?
Secondly as I don't have the requirement to default the report parameters so I am getting
"Specify parameter values ............... button "
Any way to replace it with some other text etc...
View 2 Replies
View Related
Jul 21, 2015
I have report where i should create a report which is multivalued parametr report,but here my condition is i want to see only one county name in my output that is Ex: Asia Specific (CountryName),I dnt want to see the other Country names,So how should we create for this condition .
View 5 Replies
View Related
May 25, 2015
I have a requirement to display the total of a Group after subtracting a specific value from the same Group.
Example: Say the below data is grouped on a particular column
Group Values Month
Jan-15 Feb-15 Mar-15
A 10 20 30
B 5 10 25
C 1 2 3
D 5 10 15
Total 11 22 33
Formula is : Sum(A+C+D)- Sum(B)
What is the best way to Group the above scenario from SSRS level and display the result as shown above. I am able to display all the values except the last total row where am displaying the complete total i.e. 21 42 73.
How do I dynamically subtract the values for row B which is one of the group values.
View 4 Replies
View Related
Jan 21, 2008
I am in a project where we are using a vanillla Reporting Services 2005 with the builtin report portal. No sharepoint integration yet.
We have successful deployments where we limit access to different folders based on AD-accounts and groups. In this particular case I have a folder for which I would like to allow access to all AD-users within the entire company.
So basically I know how to limit access but I don't know how to enable access for everyone. Is there a simple way to do it? I have googled and search mshelp but I couldn't find anything. I will admit to the search being quite quick but as usual time is short.
View 1 Replies
View Related
May 12, 2015
Using MDS 2012: I have an entity "XYZ_Entity". In "XYZ_Entity" entity I have 2 domain based Columns "DealerGroup" and "Dealer".
While inserting information into "XYZ_Entity" entity user can select the required dealer group from domain base Dealer Group values. Now for selecting Dealer he wants the dealers to be filter based on selected dealer group and he can select from the filtered list. reason to do that is he don't want to go through thousands of dealers and select an incorrect one.
Is it possible, if yes then how?
View 2 Replies
View Related
Aug 18, 2015
I need to remove username and password when start SSRS website.
View 4 Replies
View Related
Aug 18, 2015
I wanted to remove duplicate records from SSRS report. I set the "Hide Duplicates" to True. It is now working, But i am getting the space between the two records, which i want to get rid of. How to get rid of extra spaces between two records ( Please find the details below).
View 5 Replies
View Related
Jun 22, 2015
Is it possible to remove the tick marks that I have circled in red?The chart has data Week by week over a year, and the T1, T2 etc are equivalent to Quarter1, Quarter 2 etcI've got a 3 level grouping, with the top level being Year, then Quarter, then Week. The label for the "Week" grouping is set to blank, and that's why you don't see it here.Removing the Tick marks would make the chart legend more readable in my opinion.
View 2 Replies
View Related
Jan 9, 2008
I have a query which gives the following output, How can i get a output like this:
QUERY
COL1COL2COL3
A1AAGG
A1BBHH
A1CCJJ
B1DDKK
B1EELL
B1FFMM
OUTPUT
COL1COL2COL3
A1AAGG
BBHH
CCJJ
B1DDKK
EELL
FFMM
View 5 Replies
View Related
Jan 29, 2008
Hi All
I have the dbo.OperatingHour It has many duplicates and I want to remove duplicates permanently
The statement below works but when I open the table there are no changes
Insert into OperatingHour(Weekdays, Wednesdays, Fridays,Saturdays, [Sundays/Public Holidays])
(SELECT DISTINCT Weekdays, Wednesdays, Fridays,Saturdays, [Sundays/Public Holidays] FROM OperatingHour)
View 2 Replies
View Related
May 24, 2007
Welcome,how can I alter following table in order to reduce neighbouringduplicates (symbol, position, quantity, price).Nr Symbol Position QuantityPrice Date1. wz9999b 1 1.02500.0 2007-05-09 08:09:42.6532. wz9999b 2 12.02500.0 2007-05-09 08:09:42.6533. wz9999b 1 100.02590.0 2007-05-10 15:47:04.1404. PZ0008VX 1 2280.8842090.55000000000022007-05-1612:43:12.4035. PZ0008VX 1 2280.8842102.05000000000022007-05-1612:45:27.4206. wz9999b 1 0.0012500.0 2007-05-18 09:47:16.0337. wz9999b 1 0.0012500.0 2007-05-18 09:47:53.2708. wz9999b 1 1.01.0 2007-05-22 12:35:07.8939. PZ0008VX 1 2280.8842102.05000000000022007-05-2409:38:26.16010. PZ0008VX 1 2280.8842102.05000000000022007-05-2409:38:38.80011. wz9999b 1 0.001 2500.02007-05-24 12:35:07.20712 wz9999b 1 0.002 2500.02007-05-24 12:35:14.98713. wz9999b 1 0.001 2500.02007-05-24 12:38:07.207In the result set I would like to get the rows number 6 and 10.Any suggestions??
View 2 Replies
View Related