Reporting Services :: Remove Page Break In Main Report?
Oct 16, 2015
I created a subreport1 with tablix.I created second subreport2 that has a tablix and one column chart and both are placed in a rectangle. No page break is applied to this rectangle. When I run the sub report, both tablix and Column chart are displayed on one page .
I created a main report and added Subreport 1 and Subreport 2 in 2 different rectangles. I set page break property of Rectangle(Subreport1) to End and no page break is applied to Rectangle of Subreport2.
When I run the main report, subreport1 is displayed in one page, subreport2 is displayed in 2 different pages.
View 2 Replies
ADVERTISEMENT
Nov 11, 2015
How do I add a hard page break in the middle of a two page report? I use Microsoft reports for windows.
View 5 Replies
View Related
Jul 9, 2015
I have a Report In that report I need to break out company code and export this report on excel and each company code shown its own tab in excel .I just add image about report details.I tried this issue but i cant get the exact names on excel sheet.
View 3 Replies
View Related
Sep 26, 2012
i have used rdlc report. how can i set the page break in report
View 6 Replies
View Related
May 7, 2015
I have a report with multiple tables. I need to show each tables in different pages. When there is no data for tables/tables , it is coming with the next table which has data. I have given "Add a page break after" option in the tablix but still the tables are coming together when no data available. How can I show it in different page?
View 2 Replies
View Related
Apr 20, 2015
I want to page break after after 6 grno recored.I used ceiling(rowNumber(Nothing/6)) but it worked differ(this fun used on top most group )below I attached screeshot. I need to page break after 6 grno record but above syntax measure 6 datafiled row and then page break.how I can page break after 6 grno record
View 3 Replies
View Related
May 17, 2007
I have an existing report that has a table that contains two groups. The 1st group has the option to "page break at start". The 2nd group isn't set to page break. The report works correctly if the 2nd group's data fits on to a single page per data group. However, if the 2nd group's data for one of the iterations crosses page boundaries, it causes issues with the beginning of the report. The report breaks the 1st groups rows into separate pages, and combines the previous row with the next row on the next page, until the 2nd group is encountered, and then another page break.
Example (Assuming 3 rows in the 1st group)
1st group - 1st Row
<page break>
1st group - 1st Row
1st group - 2nd Row
<page break>
1st group - 1st Row
1st group - 2nd Row
1st group - 3rd Row
<page break>
1st group - 1st Row
1st group - 2nd Row
1st group - 3rd Row
2nd group - 1st row
<page break>
1st group - 1st Row
1st group - 2nd Row
1st group - 3rd Row
2nd group all remaining rows now appear.
This report works fine on SQL 2000 SP2, and SQL 2005 SP1. In my test environment, I was able to verify that the report worked on the previous SSRS versions, and then broke immediately following the installation of SQL 2005 SP2. I have tried many things from changing the paging, grouping, table structure, and starting from scratch. Maybe I have missed something. If anyone has any ideas or suggestions, I would appreciate the help.
View 1 Replies
View Related
Dec 2, 2015
I have a dataset with 2 fields : code and value. I have a parameter that will give me the data to insert into the table I want to make. The number of rows is not fixed, so I couldn't create, for example, a table with a fixed number of rows.
I want to create some kind of table that will allow me to have cells that look like this : "code" : "value" and have 3 of them (like 3 columns) before I switch to the next line (row).
Just to make it clear, I'm not using any SQL requests here, data comes from XML.
It should look like this :
code1 : value1 code2 : value2 code3 : value3
code4 : value4 code5 : value5 code6 : value6
code7 : value7
and it'll go like this until I've used all the data.
View 5 Replies
View Related
Mar 5, 2014
Example: A sales report that details and summarizes each Salesperson’s total sales within a company’s stores that reside in each state.
The report has 3 levels of groupings where the highest 2 levels require summary counts on a separate page and the lowest level produces a summary count in the midst of the detail lines of the report.
The data consumed by the report is ordered by State, Store ID, and Salesperson.
The header of each page lists the State and Store ID. The detail lines of the report list items sold and the associated sales amount for each item sold by each store’s salesperson.
At the end of each Salesperson’s items sold, a summary line is listed on the next line in the report showing the total amount and total count of items sold by that Salesperson.
The very next line on the report lists items sold and the associated sales amount for the next Salesperson within that particular store.
Summary lines will be produced for each Salesperson within each particular store on the next line of detail in the report.
At the end of all sales data for each store, a summary page is produced on a separate page listing the summary of each Salesperson’s totals.
Each line of the summary page contains the same counts for each Salesperson that was embedded in the detail section of the report.
The summary page also contains a grand total line listing the total count and sales for all salesmen within each given store.
At the end of all sales data for each state a summary page is produced on a separate page listing the summary of each store’s totals.
Each line of the summary page contains the grand totals of all sales for each store within a given state.
The summary page also contains a grand total line listing the total count and sales for all stores within each given state.
The simple breakdown is the groupings and totals for each state and store must be listed on a separate page in the report.
The grouping and totals for each Salesperson must be listed on the next line within the detail section of the report.
Current issue: The requirement is for no page break at the end of each salesperson’s sales data because the page breaks produce too many extra pages in the report.
Disabling the page break at the Salesperson level produces format issues such as page headers printing on the next line in the report before each Salesperson’s summary line.
Disabling the page breaks at this level also produces the problem of suppressing the page break for the summary page that comes at the end of each store.
Question:The report has 3 levels of grouping with Salesperson at the lowest level, Store ID being the parent group of Salesperson, and State being the parent group of Store ID. Is it possible to format the Salesperson summary line (lowest level grouping) as just another detail line in the report without impacting the report format that requires page breaks at the parent group levels?
A sample report layout of what we are trying to achieve is on the next page.
Sales Report
State: Alaska
Store ID: 100
Item Sold
Sales Amount
Hammer
$10.00
Saw
$15.00
[Code] .....
View 2 Replies
View Related
Mar 26, 2008
Hi -- I have a different problem than most people with a Reporting Services 2000 report rendering to Excel 2003.
My report has 5 different subreports. I want them to appear in Excel as 5 separate tabs. When rendered through the browser (using Report Manager), the page breaks are correct -- there are 5 pages.
When exported to Excel, the first report is on a separate tab, and the other 4 are jammed together on one tab.
Each report consists of between 1 and 4 tables. The last table on each report has the "page break after this table" checked.
The same report deployed to SSRS 2005 page breaks the way I expect in Excel. In SSRS 2000, it doesn't.
Any ideas? Report/body page widths/heights?
Cheers,
David
View 1 Replies
View Related
Aug 10, 2015
I have designed a report in which there are 6-7 charts. I want to print each chart in a new page. For this I have inserted page break after each chart. After this the report is populating fine but when I am exporting the report in pdf the page break are not working.
View 4 Replies
View Related
Nov 2, 2015
I developed a main report containing numerous subreports. But now I'm trying to page break on these subreports and because these subreports all have sub-sub reports, I get this error when I try to run this report..The value '22' is invalid. Valid values are between '0' and '1'. (rrRenderingError)..I am grouping on uniqueidentifers and I do not get errors on subreports that have sub-subreports. How can I avoid this error and get these subreports to page break? (I don't get any errors if I remove the page breaks).
View 3 Replies
View Related
Sep 29, 2015
I have a group in my report that contains an empty footer row to get a better visibility. Because the row has a frame it should be hidden if its the last row on the page. How can I manage that?
View 4 Replies
View Related
Jul 23, 2015
SSRS 2008 R2
I have two level of grouping Example:
:::HEADER:::
A [GROUPING 1]
B[GROUPING 2]
C[GROUPING 2]
When I apply Page Break
:::HEADER:::
A [GROUPING 1]
B[GROUPING 2]
:::HEADER:::
A [GROUPING 1]
C[GROUPING 2]
[URL]
View 3 Replies
View Related
Nov 16, 2015
We are facing problem in doing page break with column grouping. Our column group contains years e.g 2011, 2013 . We want to show a complete page for a year.
Suppose 2011 has 10 records(horizontal) and 2013 has 12 records(horizontal) in column. The output should be 10 records of 2011 in first page, 12 records of 2013 in second page.
We cannot change the report layout to make column to row and vice versa.
View 3 Replies
View Related
Aug 2, 2015
In SSRS reports i have multiple charts and tables. per page i have to display one chart and one table. How to put page break after the chart and table. I have not used rectangle. I created all the charts and tables in the body area.
View 5 Replies
View Related
Sep 16, 2015
I am trying to develop a report from cube,and it has one drill through report.when i click on sales amount field on main report,then it open the drill through report with details.Here i passed the **(category,subcat,product)parameters(Cascaded)** to drill through report in action part of main report.In my main report i have two columns .
columns are **Level** and **Salesamount**.
Values are like
**[-]category** **100**
**[-]subcat** **50**
**product** **30**
when i click on 100, parameters are passed & it open the detail report correctly, but when i click on 50,the values for subcat parameter is not getting values in detail report and same as the product also.
Here i used the expressions in parameter values
**pCategory**----iif(inscope(category),!fields.category.value,split(join(Parameters!category.value,","),","))
**psubcat**----iif(inscope(subcat),!fields.subcat.value,split(join(Parameters!subcat.value,","),","))
**pproduct**----iif(inscope(product),!fields.product.value,split(join(Parameters!product.value,","),","))
View 3 Replies
View Related
Oct 6, 2015
How do I get data on my linked report based on my grouped subtotal and grand total from the main report. The subtotal and grand total are calculated columns.
I have a 3 columns in my matrix in the SSRS summary report. Actn_COAST, ActnCITY and NumbOfAccts.
The following is code for my summary report. The results are shown below.
SELECT Distinct ActnCITY, Count(ACCT) as NumbOfAccts,
CASE WHEN ActnCITY in ('NY', 'OH', IN, 'NJ', 'SC', 'NC') THEN 'EAST COAST'
WHEN ActnCITY IN ('CA'. 'NV', 'UT', 'WA', 'OR') THEN 'WEST COAST'
ELSE 'OTHER'
END AS Actn_COAST
FROM tbl1
where ACTNDATE between @STARTDT and @EndDT
Code for my detail report contains the following SQL
SELECT * FROM tbl1 where ACTNDATE between @STARTDT and @EndDT AND @ActnCITY = ActnCITY
I have linked my report based on the NumbOfAccts column. I am able to get data if I click any of the NumbOfAccts values related to the state I want. However when I am not sure how to make the subtotal and grand total work. I want when I click on the subtotal of either coast, I should be able to see records of that coast e.g., if I select 37 I should be able to see all the records in East Coast. If I click on the Grand Total, I only want data related to those 2 coasts.
View 2 Replies
View Related
Apr 21, 2015
I have a SSRS report with 4 sub reports embedded. Previously i faced a situation where sub reports was getting displayed with static data even if there is no data being pulled from data set. I solved this problem according to solution provided in my previous post here. Now blank space is getting displayed in place of empty sub report. But still the main report that hosts empty sub report (Which has a header with header name coming from main data set) is getting displayed. Is there any way wherein the whole main report can be suppressed when the sub report has no data?
View 3 Replies
View Related
Jul 7, 2015
I have a detailed report in ssrs in which data can come from start date and end date parameters.but the problem is. for example i gave startdate as 01/01/2015 and end date as 09/31/2015 then the data must be in displayed in such a way that jan month in one tab and feb month data in one tab and so on to sep month data in new tab when i export to Excel.
View 3 Replies
View Related
Nov 19, 2015
I have a SSRS report with data in below format.
ID Name Date
1 A null
2 B 01/01/2012
3 C 01/02/2013
Also, I have a sort parameter @sort and values are (Name, ID, Date)
I want to apply page break whenever @sort=Name. There should be no page break when user selects @sort = ID or Date. Page break should happen only when @sort value = Name
it should be like this...
Page 1:
ID Name Date
1 A null
Page 2:
ID Name Date
2 B 01/01/2012
Page 3:
ID Name Date
3 C 01/02/2013
I need achieving the above task.
View 2 Replies
View Related
Jun 26, 2014
I have 11 records in the Main report.I want to make Imagebutton for only the 11 record.If click on Imagebutton then the subreport show in the below.But there is no relationship between MainReport and SubReport.
View 2 Replies
View Related
Sep 9, 2015
I just created a report builder. I have a main report and i wanted to create a sub report. why i cant or i cant view the path or the folder of my .rdl file to be use as my sub report.
View 5 Replies
View Related
Apr 2, 2007
Hi All,
I am having a main report having two subreports, say M1,S1 and S2 respectively.
The issue is S2 normally tend to go beyond one page, for all pages except first page of the of the subreport I am getting the page header and footer blank,
Actually this is not loading the ReportItems that are used in main report but it shows text boxes containing strings for eg . "My Name" and date functions eg Today()
Any Solution?
Thanks and Regards
Pragash
View 1 Replies
View Related
Apr 4, 2007
I have a Sales report with 3 lists each being nested inside of the other and they also each contain a Matrix. Top list is for Region, followed by District and then State. I have page breaks setup so that each region appears on it's own page, followed by each District summary appearing at the top of the page with a breakdown on that page for that Districts states. In total the report exported to PDF or printed runs around 19 pages. This report when exported to PDF or printed works fine.
When I export it to excel I get a full document map on the first worksheet. I then get 10 worksheets of information breaking off the last 9. The document map links reflect the absence of this data by not actually being links from that point on. If I remove page breaks so that the number of pages created are less than 10 excel worksheets the export works fine and my document map links are created.
So does the export to Excel have a limitation on the number of Worksheets that can be created? In my case it appears to happen at 10 each time. Oh and by the way I've attempted this in VS.2003 and 2005 and SQL Reporting Services 2000 and 2005 for the same reports.
Thanks for your assistance.
View 1 Replies
View Related
Nov 22, 2007
What we've found is that when you have two reports where one navigates to the other, if you click on the second page of the second report, it takes you to the second page of the original report. If you navigate over to the subreport again and click for the second page, it works appropriately. This is definitely a no-go for production code and this may delay our ship date because I would think this is definitely undesirable.
Conditions:
ASP.NET Report Viewer using Remote Reports
Report that links to another report
Both reports return more than one page
Reporting Services installed
Steps to Reproduce:
Download the source code here.
Follow the directions (near the bottom of the post) to get the project set up.
Run it and click on a link in the first report to go to the second report.
Click the arrow for page 2 of the second report.
Notice how it takes you back to page 2 of the first report (this doesn't happen when you are in preview mode in the Reporting Services project and I don't believe it does this in a smart client application).
Click on a link in the first report to go back to the second report.
Click the arrow for page 2.
Notice how it takes you to page 2 of the second report.
Here is a link with source code and a more detailed explanation: http://geekswithblogs.net/robz/archive/2007/11/21/Reporting-Services-2005-BUG-Report-Linking-and-Paging---ASP.NET.aspx
So what I am looking for is both a workaround for now and if this is determined to be a bug, to be fixed in the next service pack.
View 6 Replies
View Related
Nov 27, 2015
I have a main report and 2 sub reports. I would like to pass the total Premium Paid from 2nd Sub report , and Total Bonus received from 3rd Sub report back to main report.
My scenario is actualy much more complicated than what i had attached below, which i cannot join the query for the 3 different reports together. But for demo purpose, i created the following sample scenario.
My main report is to display the sales summary by person by location.
A person may have more than 1 account number, and each account number is entitly for bonuses. As illustrated below.
View 2 Replies
View Related
Apr 2, 2008
Hi All,
Is there any way to remove the My Subscription,Site Setting links on the main page in Report manager.And also our client wants SSRS reports to be seen by his customer over the internet.Anybody knows about this?
Any help will be appreciated.
Thanks
Anupama
View 9 Replies
View Related
Apr 16, 2013
I've been reading a lot of posts on this subject. I understand that the issue is due to the fact that the subreport is only rendered once. So after the main report is sorted on another column, the cell with the subreport produces an error.
What I want to know is whether or not this is considered a defect. And if it is a defect, is it fixed in another version?
I am currently running SSRS SQL2008R2 SP2 (20.50.4000.0)
View 3 Replies
View Related
May 4, 2015
How to display the subreport Headers/footers in Main report (in SSRS SQL server 2008 r2)?
View 4 Replies
View Related
Jul 20, 2015
I want to repeat line on each page of report on PDF while using 2 columns on report. The problem is that if i use table border it will also repeat after second table. i want a line between two tables.
View 14 Replies
View Related
Nov 9, 2015
I am working on SSRS report deployed on the sharepoint.
By default, it is displaying " Microsoft SQL Server Reporting Services " on the report
How can that be removed?
Secondly as I don't have the requirement to default the report parameters so I am getting
"Specify parameter values ............... button "
Any way to replace it with some other text etc...
View 2 Replies
View Related
Dec 6, 2007
I have a report with several matrix objects. The data contained in each matrix is simple. One matrix has one column of labels and a column of data. The other has 3 columns of data. Both matrix's only show about 25 rows of data. A variable amount of data is displayed above the matrix's so that sometime the render across a page boundary. Whenever this happens the matrix doesn't render rows down to the bottom of the page. A considerable amount of empty space is left on the page, the completed matrix is displayed on the next page. I'm wondering how to get the matrix to render in this empty space.
This problem only occurs when I view the report on screen, in the Visual Studio "Preview" window, or from the Report Server web site. Tiff, pdf and printed output doesn't contain the extra space.
I've tried adding my matrix to a List and a Rectangle to see of this would fix the problem but it didn't help.
I've check the dimensions and margins or the page and I don't think I have any sizing problems, everything should fit on the page.
--Mark
View 1 Replies
View Related
