I want to repeat line on each page of report on PDF while using 2 columns on report. The problem is that if i use table border it will also repeat after second table. i want a line between two tables.
View 14 RepliesI have created the matrix report which has dynamic column, it grow columns(18) based on the 'MCU' field in PRD.MI table. I have added the 'MCU'(A,B,C,D,E,F,G,H,...Q) on 'Columns' in matrix table, to create matrix report and I have added 'mcst' on 'Data' in matrix table and I have added the 'msp2' on 'Rows' in matrix table. I have created new column after row and I added USP2DS.Final output is as given below.I need the split the matrix column per page.
I have added the 'MCU' on "Column group and 'msp2' on Row group.
Query:
select mi.*, SUBSTR(SM.USP2DS,6,9)AS DESC from
(SELECT a.mcu , a.msp2, SUM(a.mcst) AS Cost
FROM PRD.MI as A
WHERE a.myr=2015 and a.mpr=7
GROUP BY a.MCU, a.msp2
order by a.mcu, a.msp2 ) mi,
(SELECT DISTINCT U_SP2, USP2DS FROM UM.SM) SM
WHERE A.MSP2=SM.USP2
ORDER BY MCU,msp2
I have tried the below post, but I am not able achieve my output. [URL] ....
Let's say I have an rdlc report for customers, and it has three sections with subreports:
CUSTOMER_INFO (name, phone, e-mail)
ITEMS
OBSERVATIONS
As the page only has 21cm and the report grows horizontally, I need to repeat the WHOLE report with all of its sections after every 4 customers. So if I have 5 customers, there would be three pages(let's say every subreport takes 1 page) for the first four customers, and then another three pages(with every section once again) just for one customer.
Is it possible? It doesn't seem somehing out of the ordinary, but I can't figure how to make it work. Everytime there is more than 4 customers, the report breaks its layout trying to accommodate the records in a new table below the tables of each subreport.
The expected result would be to bring all of exceeding data to new pages.
How do I add a hard page break in the middle of a two page report? I use Microsoft reports for windows.
View 5 Replies View RelatedI typically use Report Designer, but I have a new project requiring Report Builder 3.0. In Report Designer (BIDS), I can take more complex expressions (ie SWITCH with 5 or 6 options), and put each pairing on a new line to be able to better read the code.
In the Expression Editor in Report Builder, pressing the ENTER key on my keyboard closes the Expression dialog box and saves the changes.
Is there any way to add line returns in the code to make it more readable? The expression editor wraps when it runs out of room, but this doesn't make it more readable, in some cases, it wraps in the middle of a field name, making it even less readable.
The 2012 version also has this same "feature".
I've created some reports in Reporting Services 2003 and would like to call them up from a .Net 2003 windows based application. I'm passing one parameter to the report and would like to be able to automatically call the Save As... command and provide a path and name to save the file. I wnat to render the report as a PDf file and save it in that format as well. I can generate the name of the file on the fly using the input parameter value.
What I need is a sample of how to instantiate a reporting services object in .Net 2003 and the commands to execute the Save As function after the report has been rendered.
Thanks
The Mad Jammer
I want to add a detail line on a report in visual studio. How can I do it?
View 9 Replies View Related
I've never attempted to use the "Repeat Report Item with Data Region on Every Page " feature before. I'm trying to use it on text boxes with the data region being a matrix. I have a report that is two pages, and the text boxes are only appearing on the first page. Also, the matrix is appearing with zero space between it and the header. Any ideas?
Lindsay
I have a simple report which includes Dname and Description columns.
In the description column if the value is more then when coming to second line has to be 2 SPACE indent.
Below Image for your reference.
I am using reportitem to show the data in the header from a table cell.i see the values just on the first page, from second page onwards reportitems not showing the values at all.
I am getting the reportitems values from a tables header cell and also made the tables header cell's property checked repeat header in all pages.
Header is appearing but the values in reportitems are not populating from page 2 onwards.
i tried / used everything including inserting group header still i don't get it towork.
please help.......................
Hi
I had a problem accessing our report manager via the web front...
We deleted the virtual directories in IIS and then recreated them... this required us to make a change in the rsWebApplication.config file to include the URL in the ReportServerUrl tag before we could access the site again.
Now we have access to the site but when we attempt to view a report that we deployed to it - the report fails to render and returns a rsReportNotReady error, even though the report doesnt use a snapshot.
Furthermore, the strange thing is that the filters for the report don't display in their own collapsable bar as they used to before... they just display on the white part of the page. Neither does the reportviewer toolbar display properly. It appears as labels and textboxes going down the page and not in a toolbar as you might expect...
any help is appreciated... we suspect that it is some kind of configuration issue, but we have no clue where to begin...
I have a Report In that report I need to break out company code and export this report on excel and each company code shown its own tab in excel .I just add image about report details.I tried this issue but i cant get the exact names on excel sheet.
View 3 Replies View RelatedHello,
I am trying to embed a Reporting Services Report in a aspx page. I have the report embedded in the page but I am having difficulty passing a parameter to the report and getting the report to run within the page. Any information is appreciated.
Thanks!
I have a report which shows around 8 columns. The report is in landscape mode(Width -11in and Height-8.5 in). I want to display only header in the first page means basically I want to add a cover page.
I have used tablix to display data. To display an empty page, I have added a rectangle before tablix and made add a page break after true. But while exporting to pdf, I am getting 2 blank pages with header. But I need only one.
i have used rdlc report. how can i set the page break in report
View 6 Replies View RelatedI have created .RDLC file/report in MVC, but in Report Viewer when i try to display next page, i am unable to see the next page. it is just displaying the first page data and charts only.
View 3 Replies View RelatedI am displaying the red line in the beginning of the current week column in the matrix table. But for few resources the red line is missing. For Example in below screenshot, refer the 'Adrian Larkin' resource. Here is the SSRS report border expression which is comparing the [TimeByDay] with the current Week First Monday Date to display the red bar -
=IIf(Fields!TimeByDay.Value = DATEADD("d", -(WeekDay(Today(),2))+1, Today()), "Red", "Black")"
Here is the dataset result set. If you refer the column [TimeByDay], it has no record for the date 11/05/2015 for the Adrian resource as he has no assignment for the date 11-05-2015.display the red missing line red bar using the expression or any other solution.
I am fairly new to reporting services and recently created a simple tabular report. There is one table which queries the database and I would like to change the table so there are more than 25 rows of data per page. How do I do this? Also it would be advantageous to know how to set the report to only create a new page for every different item in a column. E.g., if I have various data for each date, I would like to only create a new page when the date changes so that all data for a specific date is on one page etc etc.
View 13 Replies View RelatedI created a subreport1 with tablix.I created second subreport2 that has a tablix and one column chart and both are placed in a rectangle. No page break is applied to this rectangle. When I run the sub report, both tablix and Column chart are displayed on one page .
I created a main report and added Subreport 1 and Subreport 2 in 2 different rectangles. I set page break property of Rectangle(Subreport1) to End and no page break is applied to Rectangle of Subreport2.
When I run the main report, subreport1 is displayed in one page, subreport2 is displayed in 2 different pages.
Report in question is an invoice form. It requires an absolutely bottom-of-page aligned footer that has databound elements. This is so that whatever page that footer finally appears on will print in such a way that the address will align in a windowed envelope. Ironically, Books Online gives this exact scenario in explaining headers and footers in SSRS, but they cleverly don't explain how an absolutely bottom-of-page-aligned and data-bound footer can be made to happen. Headers at absolute page top is obviously no problem. Footers at page bottom, not so much.So, this is not a "page footer"--page footers are employed in the body. Also this footer is databound, so a page footer as it's known in SSRS is out the window anyway.
Most of the time this will print on a single page, but if it breaks to multiple pages, that footer needs to go all the way to the absolute bottom.I grasp that the "report footer" for SSRS is just what appears at the end of any repeating controls that you've implemented in your body. Because SSRS uses this kind of repeating-control based idiom rather than a section-based idiom as Crystal does, this kind of (what I would consider very basic) positioning control is looking fairly impossible right now.Among what I've tried:
--Page footer (can't; databound)
--Specifying a page break after the pre-footer controls, and/or a page break before the controls that make up the footer in their properties. This leads to unpredictable results with blank printed pages (as many as 8 for what previews as a 2-page report, how silly is that?).
--Putting in a page-height rectangle as part of the footer (with and without the page breaks mentioned above), with the idea of forcing a basically blank page at the end of the report so that the footer will go to the bottom. SSRS will go ahead and break the page anyway on long elements like that, which again leads to the "footer" being printed in the middle or top of the final page, or whereever it happens to fall.
I may be having to explain to my client that you can't get there from here, and they may have to redesign their report.
Is it possible to have different chart (having their dataset from same shared datasets) like six on one report, then secondly can they all respond to same parameter filter.
View 3 Replies View RelatedI created the report, which has 4 pages. Each page contains bunch of tables and charts, which display data in scope of dataset, created for each page and reflecting certain subject. Each page also has Header and Footer.
My users requested, the report has possibility to include or not include data on Page #4.
Other words, report should display 3 or 4 pages based on the entered parameter.
1. I created parameter named “Include #### metrics”, which contains options: Y, N
2. For each object on the page 4 I added dependency on the selected parameter in the visibility option.
Now if user select parameter Not include Page #4, report displays 3 pages as expected and page #4 is empty, but with Header and Footer.
The problem: Their preference is to not to show page 4 at all if someone chooses to not to include #### metrics.
My question is how to force the report to display just 3 selected pages.
How to make SSRS report page size dynamic, or in a way where viewer can set it to the size they want?
Set to 0
is it possible to separate Grand Total of a sub group to a new page?
I tried using advanced mode, find the first line the Grand Total section and set its "RepeatOnNewPage" to true, but, when I execute the report, it will throw an error something like the value of RepeatOnNewPage of the TablixMemeber must be the same as its previous object.
I need my report pages to separate by subGroup(SubGroupA, SubGroupB, A+BTotal).
I have a set of SSRS reports published on the server. It can be accessed through a web application or through SharePoint. Most of the reports work fine through both - web app and SharePoint. However, one of the report, which returns large amount of data has some problem:
1. It generates fine from web app
2. It generates fine from SharePoint; only if one or two values selected from Filter dropdown
3. However, if all items (about 20 items) selected from Filter dropdown... and click on View Report, it processes for a while and then shows nothing. The page remains blank.
Did some research and felt the problem is with Distributed Cache Service.
Tried restarting it; tried changing SPDistributedCacheClientSetting settings - requestTimeout, channelOpenTimeout... but didn't work.
I checked Event Viewer logs, SharePoint logs and SSRS logs but couldn't find any relevant error messages.
I have a dataset with rows that I normally would display in a table control. I have too many columns and I would like each data row to be display on many lines. How is that possible?
View 4 Replies View RelatedHi,
I'm still quite a beginner with the Report Designer and now I have faced a problem. My goal is to make a reports refresh each time it is loaded. I know that this can be done by using rs:clearsession = true-method but in order this to work, it should be added to each link. There are a lots of links in the reports we are using and therefore it would be more practical to find another way to refresh the report on page load. Is there any way to do this with some kind of code attached to each report? I'm using Visual Studio 2003 and my Reporting services 2000.
I just created a report builder. I have a main report and i wanted to create a sub report. why i cant or i cant view the path or the folder of my .rdl file to be use as my sub report.
View 5 Replies View RelatedCan we build a report like the one shown above . Basically the columns will be on vertical columns and values of the columns will be next to it ? I know there is matirx control but it is for multiple columns .
In business objects we have separate control for this but in ssrs we have 1 table control and another matrix control. I think i need to modify matrix control to achieve it...
I need to sort my tablix report where I have several calculated columns like:
=ReportItems!Textbox47.value+ReportItems!Textbox48.value..
Now I would like to sort these by using the Interactive sort functions - but I have seen elsewhere that this is not possible..(I'm also getting an error when trying..)Is there not a way that I can bypass this (using Code function or similar) ? The datasource for the data is a OLAP cube
We have the customer requirement to display the footer of a SSRS Report fixed at the absolute bottom of a DIN A4 format page. The footer contains information like company address and stuff.
I searched quite a while on this topic and only found workarounds for SQL Server 2005 with Custom Code in the SSRS Report to calculate the size of the body content and then insert some empty lines to get the space needed to push the footer to the bottom of the page. But this won't work in SQL Server 2012. And I wasn't able to figure out how to achieve this yet.
We are planning to develop weekly report in SSRS.For this we wants each day as column & some expenses[Numeric figure in row]we have dataset like
day
exp1
exp2
exp3
17/05/2015
120
150
650
[code]....
There are some other filters are there that i have applied in my report tablix property.
I want to develop a ssrs report which is grouped by month?
View 4 Replies View Related