I have a matrix table with row groups of a date and addresses and also a column group which produces 3 columns and values with in these column.I have a "Total" column based on a Count of the column groups which gives a number.How do you hide all rows where the "Total" column is less then 1? There will be results which still needs the date and addresses groups.
View 2 RepliesIn Report Builder 1.0 you could drag a column to a filter and see the data before select the values for the filter.I can't find a way to do that in report builder 3.0. is it possible to see the data of a column in Report builder or SSRS?
View 3 Replies View RelatedFor my report I am trying to display images that are pulled from a database. Images are from separate records. I have the records I need in a dataset and now I want to set a Table Cell value to the field corresponding to the image. However, the next images/(records) are displayed on the next row (as expected i guess). How do I set the the records/values to be displayed across a single row?
What I have:
image1|
image2|
image3|
What i want:
image1|image2|image3|etc...
I am working on reports in SSRS 2008 (not R2)... There are some reports with parameters that are hidden when the report is accessed through normal URL using ReportViewer.asx..The thing is that these hidden parameters need to be visible when the report is accessed using SSRS Report Manager.
View 3 Replies View RelatedI have a stacked column with 2 series("phones", "no phones") on the categories, What I am trying to do is to show only one of the series in each category,I used the visibility option in the series properties, and chose show or hide based on an expression using the expression below if(Fields!PENETRATIONSERIES. Value="no phone",FALSE,TRUE) i get no graph , But when I switch the true and false value, the graph show with the two series there.
View 3 Replies View RelatedI Have an SSRS report which shows questions and answers pulled from a view tables.I have 3 rows: Row 1 shows questions and answers 1 - 128, row 2 shows questions and answers 128 to 248 and row 3 shows 248 onwards.I only want the row with the correct questions and answers to show.So am using this query for example:
=IIf((Fields!vQuestions_Question_ID.Value < 128 Or Fields!vQuestions_Question_ID.Value > 247)
AND
(Fields!vQuestions_Response_value.Value < 128 Or Fields!vQuestions_Response_value.Value > 247), False, True)
which fails.If I only use= IIf(Fields!vQuestions_Question_ID.Value < 128 Or Fields!vQuestions_Question_ID.Value > 247, False, True) this works.What is the correct syntax for the multiple IIfs as i want both the criteria in the first query satisfied?
Most of our reports need to be rendered directly to PDF. And since we have multi paged reports, we have implemented document map to have navigation. while exporting to the PDF, Users want the Bookmarks to be visible by default. However, this is not the case. The bookmarks tab in the Navigation tools of Acrobat is not expanded rather we need to manually click on it to see the bookmarks. This behavior is different from Crystal Reports XIr2 where the bookmarks are defaulted to be visible when opening a PDF exported by crystal.Is there any way to replicate this behavior in SSRS too?
View 3 Replies View RelatedSo if my Parameter value is...
MCCL, MCMA, MCPL, MCPR, MCRE, MCSE, MCSN, MCVA, MCCL, MCEP, MCMA, MCRE out of 43 possible choices,
What is the expression syntax to hide my tablix column based on my parameter value?
=iif(instr(Join(Parameters!ColumnVisibility.Value,","),"MCCL","MCMA","MCPL"...)>0,false,true)
Just not sure of the syntax...or do I have to qualify each one???
= IIf(Parameter!PF1.Value = "MCCL" OR Parameter!PF1.Value = "MCMA"..., TRUE, FALSE)
I am using Column Groups:
And I am getting:
Note how Today is being repeated three times. What I want is Today appearing once and centered (merged cell). Is this possible?
I have a report builder drill down report. I have row groups with totals. It looks like the attached. The problem is when the report is not expanded the Grand Totals column is not accurate... it is displaying the totals of one of the rows when expanded.The expression in the Total Show text box is
= Switch (
MID(Fields!protocol_id.Value,1,7)="THERAPY",
Sum(IIF(Fields!status.Value = "CO", CDbl(Fields!TX_CO.Value), Nothing)),
MID(Fields!protocol_id.Value,1,7) = "GENERAL" and MID(Fields!program_id.Value,1,6)
= "INTAKE", Sum(IIF(Fields!status.Value = "CO",
[code]...
Is there any way to not display the expression in the Total columns unless the report is expanded?
I was wondering if there was any way to add a value field to a report, with the time it took for the report to Process.
It would probably be a text field with an Expression, but don't know how that would go.
I know that in Expression there is a value for ExecutionTime (when report began to run), but nothing about when it ends.Can this be done? and if yes, how?
Is there a way to see Report-Level variables in Report Builder 3.0? Also, just as a feedback, it would be really nice if there were a way to see and easily access all of the variables used in a report from one location instead of going to the dataset, the report, and then to the individual groups (if needed) to see the variables. Also, it would be very useful if Group-level variables can show up in the Expression Builder as well.
View 2 Replies View RelatedI've gotten to the point of publishing the new reports on the SSRS server and have run into the following problem.
I use a field in the primary report with the "Go to report" action to open up another report (also published) for more details. It works properly from within ReportBuilder (2.0) using the report server and I can go to and from the secondary report as I expect. Its passing the correct parameters to the second report and its runs.
But when I use the reports from the SSRS web, the Go To link no longer works. Mouse hover shows its still a link but clicking goes no where. I can run both reports independently from SSRS and they still work.
I've tried this in IE and Chrome with no luck in either. I also poked around at Compatability view and popup blocker but nothing made any difference.
I just created a report builder. I have a main report and i wanted to create a sub report. why i cant or i cant view the path or the folder of my .rdl file to be use as my sub report.
View 5 Replies View Related
Hi,
Iam working on Reporting services.
Ive known how to generate a RDl file , which is in XMl format..
can we Retrieve this File.I mean capture the XMl format of and RDL file saved..
Thanks
Sowmya
I would like to automate a report using Report Builder 3.0. I have limited access to the Reporting Services, so I would like to create a task on my workstation to automatically run the report by clicking one button.
View 6 Replies View RelatedI have one matrix with multiple row & column groups which is not looking nice.
See the below image. The reason for having a Matrix is they can create any no of Tests.
In the above image i have two row groups Test Type and Test Date and column groups as TestDesc and my required format is .
Is it possible to do custom sort for a Column Group?
i.e. if the columns are coming out as A B C, is it possible to change it B C A (or anything else).
How to count the column group values and how to print the counts on every column for column group.
I used below expression to get the total column group count.
=CountDistinct(Fields!MMU.Value, "DataSet3")
I have got a sql query and converting a Crystal report to Sql report but struggling on few places.When I created the report I need to have a column where I am struggling to figure out how to add this to the column
"if {Clocked_In} = "Y" then
"Yes"
else
if {This} then "Holiday"
else if {Sick} then "Sick"
else if {Absent} then "Absent"
else "No"
"In Crystal four columns make into one but I am not sure how can I do it in SQL report builder.
I am creating custom reports from TFS data in Report Builder 3.0. What I am trying to do is make it possible to run the report and then filter on something and only display those results. For example.. I have created a report with Project Name, Deployment Dates.
The report returns all the project names with a particular type of work item with a planned release date. I would like to be able to drop down and select a particular project name and only display results from that project. By default, I do want all the projects to display but want the possibility to select a specific project.
Do I go to dataset properties of the project name field and add an expression under the filters section?Do I also need a parameter?
Let's say I have an rdlc report for customers, and it has three sections with subreports:
CUSTOMER_INFO (name, phone, e-mail)
ITEMS
OBSERVATIONS
As the page only has 21cm and the report grows horizontally, I need to repeat the WHOLE report with all of its sections after every 4 customers. So if I have 5 customers, there would be three pages(let's say every subreport takes 1 page) for the first four customers, and then another three pages(with every section once again) just for one customer.
Is it possible? It doesn't seem somehing out of the ordinary, but I can't figure how to make it work. Everytime there is more than 4 customers, the report breaks its layout trying to accommodate the records in a new table below the tables of each subreport.
The expected result would be to bring all of exceeding data to new pages.
i am using Microsoft Sql Server 2008 Report buider 3.0. and i generated report and that report how to use custom variables.
View 2 Replies View RelatedI have VS 2013 Express and SQL Server 2014 (dev. license). I've created some projects in VS where I connect to SQL 2014 Dbs with stored procedures, functions, the usual suspects. Additionally I have Report Builder 3.0. I downloaded and installed SSDT-BI but it doesn't seem to like my VS2013 Express projects any more than I, evidently, like it. So I'm at a loss to understand how to use it to generate reports I can putt on the server and call with my projects. In short, I absolutely don't understand this stuff.I think I want to write reports using Report Builder 3.0 that I can save to my SQL Server Report Server and run from a VS2013 Express Project.
View 10 Replies View RelatedI am using SSRS 2008. I have 3 applications specific reports deployed to reporting manager..AAA , BBB and CCC - be my Applications for example.i have 3 different application users. i want to grant access the respective application users to access respective reports.i mean application user A should not be able to access/view reports from BBB and CCC. similarly for B and C application users.HOw this can be implemented ?
View 2 Replies View RelatedSome textbox are great moving, and need to when the box above gets extra data.. but how do a stop one from moving? make it stay right where I put it.
A stays where it is... for some reason. but B doesnt? it moves down according the textboxes to the left (where is says phone) ...
I typically use Report Designer, but I have a new project requiring Report Builder 3.0. In Report Designer (BIDS), I can take more complex expressions (ie SWITCH with 5 or 6 options), and put each pairing on a new line to be able to better read the code.
In the Expression Editor in Report Builder, pressing the ENTER key on my keyboard closes the Expression dialog box and saves the changes.
Is there any way to add line returns in the code to make it more readable? The expression editor wraps when it runs out of room, but this doesn't make it more readable, in some cases, it wraps in the middle of a field name, making it even less readable.
The 2012 version also has this same "feature".
I am building reports based on Report Builder and SQL server 2014.
Our report data are hosted on azure sql database.
Date time on azure are stored as UTC.
When I run my report locally, how can I format correctly the date/time format on my report in order that if I am in French, I should have the date/time set to UTC + French offset. How can I do this ?
I have a report that should read values from 2 dataset by Currency:
Dataset1: Production Total
Dataset2:Net Total
Ive tried to use Lookup(Fields!Currency_Type.Value, Fields!Currency_Type1.Value,Fields!Gross_Premium_Amount.Value, "DataSet2"), it returns only the first amount from dataset2
Ive tried Lookupset function also but it didnt SUM the retrieved values.
We can see the chinese language without any problem.However, when I open the upper report on my Report Builder, the chinese words are broken looks like below.This symptom happens after windows10 upgrade from window7 , once I use windows7 , there was no problem to see report builder.
View 3 Replies View RelatedI have an application that uses SQL Report Builder to edit templates. When I go to add a dataset to add a custom field to the report, I get a permissions error (screenshot Error). When I check the credentials for the shared datasource, they are all grayed out, so I can’t verify the credentials being used (screenshot Error 2). According to SQL Management Studio, the user credentials have the right permissions. The weird thing is, I can access the datasets and shared datasource embedded in the report just fine. I just get a permissions error whenever trying to create a new dataset.
View 2 Replies View RelatedI have an stacked chart with line with markers. The scale on the right side is the finished good which has a min qty of 383 while the highest is 52439. how can i set this scale that start from 0 to 300 and soon. right now under scale properties I set the max to 60000, the min is set to auto while in the interval properties i set this to 10000. How this line marker adjust the scale quantity (fisnished good).
View 2 Replies View RelatedI have created two stored procedures.....
1) atmWonOpportunities_Users
2) atmWonOpportunities_Data (startdate and enddate parameters)
In (1) I created a filtered list of all user names associated with a certain business unit and saved it to a temp table.
in (2) I create a filtered query listing all won opportunities during a period of time (date start and date end paramters)
In the report, I have 3 parameters, startdate, enddate and username (dropdown list).
When I run the report I select a startdate, enddate and username. I click the View Report button and get the same results for any one of the usernames I pick which is wrong.