Reporting Services :: Report Builder Bubble Chart - Axis Title Disappears
Aug 20, 2015
I have a bubble chart created with Report Builder 3.0. I have the Y-axis series is along the left side of the chart. When all X values are positive, everything displays normally. However, if any X-axis values are negative, the whole graph shifts slightly leftward and the Y-axis title is no longer visible. It seems to be overwritten by the shifted graph or simply pushed into nondisplay area.
Is there something I can do to make the chart stay put?
View 3 Replies
ADVERTISEMENT
Oct 27, 2005
Is changing the display format of the Y axis of a column chart supported in the Sept CTP or is it going to be supported in the official release? For example I have built a report model with the numeric sales values set as 'C' for currency and have created a simple bar chart with year on the category axis and sales on the Y axis. The problem is that the Y axis displays as a general number (10000000) and would like to display it as a currency ($10,000,000). I can't for the life of me figure out how to display the Y axis as currency in Report Builder.
View 2 Replies
View Related
Sep 11, 2015
I have an stacked chart with line with markers. The scale on the right side is the finished good which has a min qty of 383 while the highest is 52439. how can i set this scale that start from 0 to 300 and soon. right now under scale properties I set the max to 60000, the min is set to auto while in the interval properties i set this to 10000. How this line marker adjust the scale quantity (fisnished good).
View 2 Replies
View Related
Jul 29, 2015
On SSRS 2008 R2 I've set the Action of a pie chart title to Go to URL. When I run the report in the browser the title can be clicked and all is well.
However, when I export/render the report to pdf, the hyperlink disappears. I've tested with a small URL, but that fails as well. I've also tried the same URL in the Action of a text box and that works fine. But, I don't want a text box on top of the chart (which comes with its own positioning issues) and use the more elegant approach of having the link in the title instead.
I'm assuming this is a SSRS limitation? Re-writing the url or making it shorter does not have any effect.
View 4 Replies
View Related
Jun 25, 2015
We have created a chart in SharePoint 2013 with performance point dashboard designer. We want to change Title of chart. For more information please check attached image.
View 2 Replies
View Related
Mar 17, 2008
Hi
please excuse my ignorance but if someone could point me in the right direction i would be grateful.
i have produce a chart with some data against date points on x axis. i have another date field which i want to combine with the orignal date axis is this possible .
ie
table
results planned date Acutual date
10 02/03/07 01/03/07
46 03/03/07 03/03/07
60 06/03/07 07/03/07
i want to combine the planned date and actual date as an x axis
thanks
View 3 Replies
View Related
Oct 5, 2007
I have a chart that I am grouping data by Year, Month, day then Hour (this is to view server performance data) - however i need the label for the hour grouping to be in the format of HH:MM and not H:M by using expression
=HOUR(Fields!Timestamp_perfmon.Value) &":"&MINUTE(Fields!Timestamp_perfmon.Value)
...but this as you would kind of expect returns 0-23:0-5 ie 18:1 whereas i need it to return 18:12 or 8:12 PM..
when i change the format code for the x-axis it unfortunatey screws up all my other group by values and labels..
can anyone help?
View 2 Replies
View Related
Jul 27, 2015
What is the best optimised options to display the date labels with bi-weekly intervals starting date Date from one month to three months future from the current date?
As per above requirements, I have built the below line graph query and graph, currently it only displays the date labels as per data but I need to display date labels with bi-weekly intervals starting date from one month to three months future from the current date. Also another issue found, if there are few more date labels then does not show all labels on horizontal axis.
Select
/* Set Week End date as Sunday */
DATEADD(DAY, 7 - DATEPART(WEEKDAY, t.TaskBaseline0FinishDate), CAST(t.TaskBaseline0FinishDate
+1 AS DATE)) as[WeekEnd]
,count(t.TaskBaseline0FinishDate) as Baseline
,count(t.TaskFinishDate) as Finish
[Code] .....
View 3 Replies
View Related
May 22, 2015
I have requirement where i want to show my chart report data in Y axis...it is possible in SSRS 2008R2? or it is possible only in SSRS 2012 only?
View 7 Replies
View Related
Sep 4, 2014
I have created range bar chart and I am not able to achieve the following tasks.
1. Change X-axis Label Format to Quarter:
I have x-axis with dates and y axis of project groups. I have changed x-axis interval type = month and interval=3.
Set the Maximum = Max(ProjectEndDate) and Minimum = Min(ProjectStartDate).
Now my chart showing 3 months x-axis interval dates in mm/dd/yyyy format. I want to change this interval date format to Quarter. The problem is LabelsFormat property is not recognize the "=Q or q or quarter" and also not accepting the expressions. How can I achieve this?
2. Placing series side by side when it is not overlapping
I want to place the same group series side by side only when the previous project end date is less than next project start date, otherwise place the next project to next row. How can I achieve this?
View 2 Replies
View Related
Mar 26, 2007
Hello All,
I have a reporting services report in the form of a chart. I have two datafields on the chart.
I need to be able to dynamically hide one datafield and view the chart for the other one and vice versa.
How do I do this ?
Any help would be appreciated..
Thanks!
View 4 Replies
View Related
Jul 17, 2014
When I export the report in excel format the chart is displayed as picture. I want it to be displayed as editable chart.Does Office Writer work in this situation and did anyone use Office Writer to accomplish same type of problem.Is there any other method or product we can use instead of the office writer.
View 2 Replies
View Related
Jul 29, 2015
I have a bubble map which contains negative values for the data field.
If I Preview a bubble map report within Visual Studio, I can get the expected result.
However, once I deploy this report I cannot get any data back from the report (see screenshot below)
Once Deployed and viewed in IE:
Why this is occurring?
Also, the data field options in the Layer Wizard are SUM and COUNT. Can these be changed?
View 3 Replies
View Related
Jul 30, 2015
I have 3 SSRS 2014 (Dev, UAT and Prod). I would like to change background colors of each environment and customize the title 'SQL Server Reporting Services' to ' SSRS Development'.
I prefer to implement both, a background color change and a title change. The reason for this is to clarify to end users which environment they are working with.
Where can I make those minimal changes in SSRS 2014.
View 2 Replies
View Related
Oct 28, 2015
I have a report builder drill down report. I have row groups with totals. It looks like the attached. The problem is when the report is not expanded the Grand Totals column is not accurate... it is displaying the totals of one of the rows when expanded.The expression in the Total Show text box is
= Switch (
MID(Fields!protocol_id.Value,1,7)="THERAPY",
Sum(IIF(Fields!status.Value = "CO", CDbl(Fields!TX_CO.Value), Nothing)),
MID(Fields!protocol_id.Value,1,7) = "GENERAL" and MID(Fields!program_id.Value,1,6)
= "INTAKE", Sum(IIF(Fields!status.Value = "CO",
[code]...
Is there any way to not display the expression in the Total columns unless the report is expanded?
View 2 Replies
View Related
Feb 26, 2015
I was wondering if there was any way to add a value field to a report, with the time it took for the report to Process.
It would probably be a text field with an Expression, but don't know how that would go.
I know that in Expression there is a value for ExecutionTime (when report began to run), but nothing about when it ends.Can this be done? and if yes, how?
View 3 Replies
View Related
Mar 22, 2011
Is there a way to see Report-Level variables in Report Builder 3.0? Also, just as a feedback, it would be really nice if there were a way to see and easily access all of the variables used in a report from one location instead of going to the dataset, the report, and then to the individual groups (if needed) to see the variables. Also, it would be very useful if Group-level variables can show up in the Expression Builder as well.
View 2 Replies
View Related
Jul 6, 2015
I've gotten to the point of publishing the new reports on the SSRS server and have run into the following problem.
I use a field in the primary report with the "Go to report" action to open up another report (also published) for more details. It works properly from within ReportBuilder (2.0) using the report server and I can go to and from the secondary report as I expect. Its passing the correct parameters to the second report and its runs.
But when I use the reports from the SSRS web, the Go To link no longer works. Mouse hover shows its still a link but clicking goes no where. I can run both reports independently from SSRS and they still work.
I've tried this in IE and Chrome with no luck in either. I also poked around at Compatability view and popup blocker but nothing made any difference.
View 2 Replies
View Related
Sep 9, 2015
I just created a report builder. I have a main report and i wanted to create a sub report. why i cant or i cant view the path or the folder of my .rdl file to be use as my sub report.
View 5 Replies
View Related
Jan 10, 2008
Hi,
Iam working on Reporting services.
Ive known how to generate a RDl file , which is in XMl format..
can we Retrieve this File.I mean capture the XMl format of and RDL file saved..
Thanks
Sowmya
View 3 Replies
View Related
Jun 11, 2015
I would like to automate a report using Report Builder 3.0. I have limited access to the Reporting Services, so I would like to create a task on my workstation to automatically run the report by clicking one button.
View 6 Replies
View Related
Nov 13, 2015
I have got a sql query and converting a Crystal report to Sql report but struggling on few places.When I created the report I need to have a column where I am struggling to figure out how to add this to the column
"if {Clocked_In} = "Y" then
"Yes"
else
if {This} then "Holiday"
else if {Sick} then "Sick"
else if {Absent} then "Absent"
else "No"
"In Crystal four columns make into one but I am not sure how can I do it in SQL report builder.
View 7 Replies
View Related
Aug 20, 2015
I am creating custom reports from TFS data in Report Builder 3.0. What I am trying to do is make it possible to run the report and then filter on something and only display those results. For example.. I have created a report with Project Name, Deployment Dates.
The report returns all the project names with a particular type of work item with a planned release date. I would like to be able to drop down and select a particular project name and only display results from that project. By default, I do want all the projects to display but want the possibility to select a specific project.
Do I go to dataset properties of the project name field and add an expression under the filters section?Do I also need a parameter?
View 10 Replies
View Related
Jul 23, 2015
I have a requirement associated with SSRS bar chart.
Data in my DB is like shown below:
A
B
C
Opt1
Data1
10
Data2
20
Opt2
Data1
30
Data2
40
Opt3
Data3
50
Now I would like to build up a bat chart which should have:
Legends: Opt1, Opt2, and Opt3
Categories:
Data1(showing bars with scores as 10 and 30),
Data2 (showing bars with score 20 and 40),
Data3 (showing bar with scores 50 only)
View 3 Replies
View Related
Oct 19, 2011
i am using Microsoft Sql Server 2008 Report buider 3.0. and i generated report and that report how to use custom variables.
View 2 Replies
View Related
Sep 21, 2015
I have VS 2013 Express and SQL Server 2014 (dev. license). I've created some projects in VS where I connect to SQL 2014 Dbs with stored procedures, functions, the usual suspects. Additionally I have Report Builder 3.0. I downloaded and installed SSDT-BI but it doesn't seem to like my VS2013 Express projects any more than I, evidently, like it. So I'm at a loss to understand how to use it to generate reports I can putt on the server and call with my projects. In short, I absolutely don't understand this stuff.I think I want to write reports using Report Builder 3.0 that I can save to my SQL Server Report Server and run from a VS2013 Express Project.
View 10 Replies
View Related
May 28, 2015
I am using SSRS 2008. I have 3 applications specific reports deployed to reporting manager..AAA , BBB and CCC - be my Applications for example.i have 3 different application users. i want to grant access the respective application users to access respective reports.i mean application user A should not be able to access/view reports from BBB and CCC. similarly for B and C application users.HOw this can be implemented ?
View 2 Replies
View Related
Sep 21, 2015
I have created an SSRS report containing a bar chart. The Y-axis contains some application names which are displayed based on a certain criteria. Hence sometimes there are only 2 values in y-axis while sometimes it may range upto 20 items. I have tried a lot but have been unsuccessful in getting a dynamic y-axis which changes with the number of items present.
View 2 Replies
View Related
Jan 14, 2007
I have a simple-column chart and in the x-axis I put the date values and in the y-axis the sale price values.
The chart works perfectly in the case when there is only one sale price for the same date. But, when the price changes during the same day, then there is problem. In the following example
x y
1/1/2007 6.25
2/1/2007 7
2/1/2007 4
3/1/2007 8
the chart will have three columns and in the date 2/1/2007 will display the min or max of the two values. What I need is to represent all the values i.e. the chart must have four columns , as much as the rows of the dataset
Is it possible?
View 1 Replies
View Related
May 5, 2015
Some textbox are great moving, and need to when the box above gets extra data.. but how do a stop one from moving? make it stay right where I put it.
A stays where it is... for some reason. but B doesnt? it moves down according the textboxes to the left (where is says phone) ...
View 2 Replies
View Related
Mar 14, 2014
I typically use Report Designer, but I have a new project requiring Report Builder 3.0. In Report Designer (BIDS), I can take more complex expressions (ie SWITCH with 5 or 6 options), and put each pairing on a new line to be able to better read the code.
In the Expression Editor in Report Builder, pressing the ENTER key on my keyboard closes the Expression dialog box and saves the changes.
Is there any way to add line returns in the code to make it more readable? The expression editor wraps when it runs out of room, but this doesn't make it more readable, in some cases, it wraps in the middle of a field name, making it even less readable.
The 2012 version also has this same "feature".
View 5 Replies
View Related
May 13, 2015
In Report Builder 1.0 you could drag a column to a filter and see the data before select the values for the filter.I can't find a way to do that in report builder 3.0. is it possible to see the data of a column in Report builder or SSRS?
View 3 Replies
View Related
Oct 14, 2015
I am building reports based on Report Builder and SQL server 2014.
Our report data are hosted on azure sql database.
Date time on azure are stored as UTC.
When I run my report locally, how can I format correctly the date/time format on my report in order that if I am in French, I should have the date/time set to UTC + French offset. How can I do this ?
View 3 Replies
View Related
