We've edited a report in SSRS that initially ran with no errors. The view that the report runs from produces a resultset in about 3 seconds, but the report itself takes over 30 minutes then it times out.
View 4 RepliesIn report builder 2.0, I cannot determine how to display the number of times a field has been filled out when a one to many relationship is involved. I get an error every time I use two aggregates.
ID, Symptom_ID
1, 111
2, NULL
3, 222
3, 333
3, 444
4, NULL
5, 666
The result should be 3 out of 5 records... Or even better displayed as a percentage of the total 60%
I have a cell in one of my reports that displays both a begin time and an end time. The problem is that the times are stored in military time and I need to display them in AM/PM format.
Currently I am doing the following:
CASE
WHEN DATEPART(HH, start_time) < 13 THEN RIGHT(CAST(100 + DATEPART(HH, start_time) AS CHAR(3)), 2)
ELSE CAST(DATEPART(HH, start_time) - 12 AS CHAR(2)) END + ':' + RIGHT(CAST(100 + DATEPART(MI, start_time) AS CHAR(3)), 2) +
CASE
WHEN DATEPART(HH, start_time) < 13 THEN ' AM' ELSE ' PM'
END
+ ' - ' +
CASE
WHEN DATEPART(HH, end_time) < 13 THEN RIGHT(CAST(100 + DATEPART(HH, end_time) AS CHAR(3)), 2)
ELSE CAST(DATEPART(HH, end_time) - 12 AS CHAR(2)) END + ':' + RIGHT(CAST(100 + DATEPART(MI, end_time) AS CHAR(3)), 2) +
CASE
WHEN DATEPART(HH, end_time) < 13 THEN ' AM' ELSE ' PM' END AS 'TIMES',
in order to present the two times in one cell in AM/PM format. While this works, I'm wondering if there is a way in Reporting Services layout mode to give a date or time format mode to a cell that will work for two times with a dash in between them, rather than simply for one time. Then I could pull the times in the format that they are stored on the database and use Reporting Services to format them. Does anyone have any suggestions?
Log shows this:
Product : OWC11
Error : Error 1311. Source file not found: C:DOCUME~1TOMCUR~1LOCALS~1TempIXP000.TMPSKU0A4.CAB. Verify that the file exists and that you can access it.
--------------------------------------------------------------------------------
Machine : D7NSJK71
Product : Microsoft Office 2003 Web Components
Product Version : 11.0.8003.0
Install : Failed
Log File : c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0005_D7NSJK71_OWC11_1.log
Last Action : InstallExecute
Error String : Source file not found(cabinet): C:DOCUME~1TOMCUR~1LOCALS~1TempIXP000.TMPSKU0A4.CAB. Verify that the file exists and that you can access it.
Error Number : 1311
When the dialog box appeared indicating file couldn't found, there was no option to look elsewhere for it the only option was retry or cancel which after 5 or 6 retries I cancelled. Everything else appears to have installed correctly for this instance.
Also earlier attempts to install have left services for named instances that I cannot install to such as SQLEXPRESS , SQLEXPRESS1 and CURRIEREXPRESS, I long ago had a beta version installed and have attempted numerous methods to completely wipe these out using the uninstallbetas tool from Microsoft as well as a number of suggestions from some posts.
Please help - The most significant reason I'm installing this is to practice creating SQL Reporting Service reports
I just created a report builder. I have a main report and i wanted to create a sub report. why i cant or i cant view the path or the folder of my .rdl file to be use as my sub report.
View 5 Replies View RelatedHi There,
Our DBA has installed reporting services on a server and now in order to access the report manager, one has to be an Admin on that Server. I am guessing that there is a mistake in the configuration of Reporting Services. Usually it should allow anybody who was added to the roles in the properties section of the Report Manager, right? I have also added the users to the DB..
Also I am using Windows Authentication to access Report Catalog items (Reporting Services is installed on Server2) from a web Application(deployed on Server1) and displaying the report using report viewer. For some reason, server1 has to be in an Admin role on Server2 to access the report catalog/report. This is kinda strange for me as I don't want everybody to be an Admin on Server2. Can anybody please point in the right direction?
Thanks.
Is there any way to get the report toolbar using SOAP Api in SSRS reporting.
View 6 Replies View RelatedI have done the following and a domain user would not access report created a login to the SQL server to the user (this SQL Server is where data source DB is)went to site setting in Report Manager and made this use a system userright clicked on report folder and made this user in the browser roleeven checked that in the report in question, the user is already in the browser role Still the user would not access the report! "User .......... does not have required permission" is the error message I am getting.
View 6 Replies View RelatedI have written a report visual studio. The report has 10 multi-value parameters that pull data from their individual data sets within the reports. When running the report from within Visual Studio it renders fine. There are no errors reported, only a warning related to a pathname I have use to retrieve image data and display on the report.Deployment of the report is error free.When I view the report I briefly get the "Loading" splash window, but then nothing. None of the headers or static text is displayed. The results window is blank.
The report defaults all the parameter values. In trying to debug the issue I have found by reducing the number of parameter values the report will render. Once I have all the values added, the report does nothing.Below is the query being used for the report. The where clause in the query shows the parameters being used and the syntax.We are running on Windows Server 2008 R2 and SQL Server 2008 R2.
Ralph
SELECT RTRIM(a.ITEMNMBR) AS Style, RTRIM(a.ITEMDESC) AS Description, a.ITMSHNAM AS UPC, c.LOCNCODE AS Store, d.LISTPRCE AS ListPrice, a.CURRCOST AS Cost,
a.USCATVLS_1 AS [Main Category], a.USCATVLS_2 AS Market, a.USCATVLS_3 AS [Alternate Retail], a.USCATVLS_4 AS Country, b.ITEMXTRAS_1_Type AS Type,
b.ITEMXTRAS_2_Finish AS Finish, b.ITEMXTRAS_3_SubCategory AS SubCategory, b.ITEMXTRAS_4_Department AS Department,
[code]...
We are about to implement SSRS reports (SQL Server 2012), and have found one issue we don't like. The report looks great when we open it in pdf format. However, when we open it in Excel format, we want it to be the raw data, not look like the pdf report. I tried the simpl headers, and that removed the page header/footer. However, the report format was still in play.In other words, we would like the report when opened in Excel, to look just like it does when we open it as a CSV.I have tried to modify the config file a couple of times. Here is my latest attempt:
Extension Name="CSV" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering">
<OverrideNames>
<Name Language="en-US">CSV (comma delimited)</Name>
</OverrideNames>
</Extension>
<Extension Name="CSV" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering">
<OverrideNames>
<Name Language="en-US">Excel (csv)</Name>
</OverrideNames>
</Extension>
Essentially I have set Visible = "false" for the Excel type, and tried to duplicate the CSV, changing the name to make it look to the user like it is "Excel". This fails. I checked the event viewer, and I see two entries.. The RSReportServer.config file has been modified. (Information)The value for UrlRoot in RSReportServer.config is not valid. The default value will be used instead.I literally took the file, opened it in Notepad, pasted in my changes, from another notepad window, and tried to run the report. I did not see EITHER of the two names I expected, using the OverrideNames tag. As I said earlier, I was able to affect the outcome, by setting SimpleHeaders to true (or however it is identified). That did work in that the page header and footer was removed.
I have a ssrs report having 2 tables in with 4 columns in each. When I go to export option in preview I can see all data coming in one excel sheet, But I am trying to get 2 tables in 2 different pages in Excel when I export.First page of excel comes with first table data with 4 columns and second page of excel comes with second table data with 4 columns .
View 2 Replies View RelatedI am working on reports in SSRS 2008 (not R2)... There are some reports with parameters that are hidden when the report is accessed through normal URL using ReportViewer.asx..The thing is that these hidden parameters need to be visible when the report is accessed using SSRS Report Manager.
View 3 Replies View RelatedI'm wondering how to print a SSRS report without bringing up a report viewer. Is there way to print(PDF format) the SSRS report in the web application( .net ) directly from the "print" button without bringing up a report viewer?
View 2 Replies View RelatedI have a report builder drill down report. I have row groups with totals. It looks like the attached. The problem is when the report is not expanded the Grand Totals column is not accurate... it is displaying the totals of one of the rows when expanded.The expression in the Total Show text box is
= Switch (
MID(Fields!protocol_id.Value,1,7)="THERAPY",
Sum(IIF(Fields!status.Value = "CO", CDbl(Fields!TX_CO.Value), Nothing)),
MID(Fields!protocol_id.Value,1,7) = "GENERAL" and MID(Fields!program_id.Value,1,6)
= "INTAKE", Sum(IIF(Fields!status.Value = "CO",
[code]...
Is there any way to not display the expression in the Total columns unless the report is expanded?
I have few reports under different folders in Report Manager. Is there a way to set the data source for the whole folder rather than each report individually? There is also a folder where reports generate dynamically. Since the report project doesn't exist anymore, I can't set the data source through code. How can I set the data source for the whole folder?
View 7 Replies View RelatedI was able to log in to SSRS report manager. But i was unable to run a report i designed on report builder.
It prompts for login when i wanted to run the report and i used the same windows authentication to sign in
It will show me the parameters but when i click on view report it gives this error
"Data source 'DataSource1': An error has occurred.
Details: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'DataSource1'. ---> System.Data.SqlClient.SqlException: Login failed for user 'Acc-11Admin'."
I want to repeat line on each page of report on PDF while using 2 columns on report. The problem is that if i use table border it will also repeat after second table. i want a line between two tables.
View 14 Replies View RelatedWe are generating excel report using report viewer at run time but if excel report having more then 65000 record generating error Microsoft. Reporting Services.OnDemandReportRendering.ReportRenderingException: Excel Rendering Extension: Number of rows exceed.
View 2 Replies View RelatedI am trying to develop a report from cube,and it has one drill through report.when i click on sales amount field on main report,then it open the drill through report with details.Here i passed the **(category,subcat,product)parameters(Cascaded)** to drill through report in action part of main report.In my main report i have two columns .
columns are **Level** and **Salesamount**.
Values are like
**[-]category** **100**
**[-]subcat** **50**
**product** **30**
when i click on 100, parameters are passed & it open the detail report correctly, but when i click on 50,the values for subcat parameter is not getting values in detail report and same as the product also.
Here i used the expressions in parameter values
**pCategory**----iif(inscope(category),!fields.category.value,split(join(Parameters!category.value,","),","))
**psubcat**----iif(inscope(subcat),!fields.subcat.value,split(join(Parameters!subcat.value,","),","))
**pproduct**----iif(inscope(product),!fields.product.value,split(join(Parameters!product.value,","),","))
How do I get data on my linked report based on my grouped subtotal and grand total from the main report. The subtotal and grand total are calculated columns.
I have a 3 columns in my matrix in the SSRS summary report. Actn_COAST, ActnCITY and NumbOfAccts.
The following is code for my summary report. The results are shown below.
SELECT Distinct ActnCITY, Count(ACCT) as NumbOfAccts,
CASE WHEN ActnCITY in ('NY', 'OH', IN, 'NJ', 'SC', 'NC') THEN 'EAST COAST'
WHEN ActnCITY IN ('CA'. 'NV', 'UT', 'WA', 'OR') THEN 'WEST COAST'
ELSE 'OTHER'
END AS Actn_COAST
FROM tbl1
where ACTNDATE between @STARTDT and @EndDT
Code for my detail report contains the following SQL
SELECT * FROM tbl1 where ACTNDATE between @STARTDT and @EndDT AND @ActnCITY = ActnCITY
I have linked my report based on the NumbOfAccts column. I am able to get data if I click any of the NumbOfAccts values related to the state I want. However when I am not sure how to make the subtotal and grand total work. I want when I click on the subtotal of either coast, I should be able to see records of that coast e.g., if I select 37 I should be able to see all the records in East Coast. If I click on the Grand Total, I only want data related to those 2 coasts.
Is there a way to subscribe SSRS report using dynamic parameters for email and trigger the report from autosys job so that report should generate the exact time the job is triggered.Let me describe, my SSRS report should be triggered on success of one autosys job. i need to send email parameter and time of report schedule from this autosys job.
View 3 Replies View RelatedHi,
I'm having problems navigating from one report to another one if the second report has a multi-valued report parameter. When I navigate to the second report, I don't pass any parameters, but I get an error "parameter is missing a value" for the multi-valued report parameter. I have it setup as allow "multi-value" and "blank value". Any idea what the issue might be?
Thanks.
How to display the logo in middle of report header , The logo is embedded in the Image folder . The column of the report are static. we are using SSRS 2008
View 6 Replies View RelatedI have a SSRS report with 4 sub reports embedded. Previously i faced a situation where sub reports was getting displayed with static data even if there is no data being pulled from data set. I solved this problem according to solution provided in my previous post here. Now blank space is getting displayed in place of empty sub report. But still the main report that hosts empty sub report (Which has a header with header name coming from main data set) is getting displayed. Is there any way wherein the whole main report can be suppressed when the sub report has no data?
View 3 Replies View RelatedI have a report which works fine with visual studio but when i uploaded the same into report server and tries to access it through IE or chrome or anything its dam slow.
how to get rid of this issue?
I need to create a SSRS report using the Warehouse tfs_warehouse DB Report need to be drill down on WorkItemType Parents and child values. So, If we click on Product Back Log Item will get all the tasks inside it and so on....
------->Product BackLog items
----------> Bugs Or Tasks
-----------> Tasks
I have done research and found out how to do it in OLAP cube ..but still can't figure out the TSQL query to be used.Found one of the query on forum:
SELECT * FROM DimWorkItem DWI
INNER JOIN FactWorkItemLinkHistory FWILH ON DWI.System_Id = FWILH.TargetWorkItemID
WHERE FWILH.WorkItemLinkTypeSK IN (SELECT DWILT.WorkItemLinkTypeSK FROM DimWorkItemLinkType DWILT WHERE DWILT.LinkName = N'Child')
AND DWI.System_WorkItemType = N'Task'
AND DWI.System_Rev = (SELECT MAX(DWI1.System_Rev) FROM DimWorkItem DWI1 WHERE DWI1.System_Id = DWI.System_Id)
AND FWILH.SourceWorkItemID IN (SELECT DWI2.System_Id FROM DimWorkItem DWI2 WHERE DWI2.System_WorkItemType = N'Bug');
I was wondering if there was any way to add a value field to a report, with the time it took for the report to Process.
It would probably be a text field with an Expression, but don't know how that would go.
I know that in Expression there is a value for ExecutionTime (when report began to run), but nothing about when it ends.Can this be done? and if yes, how?
Is there a way to see Report-Level variables in Report Builder 3.0? Also, just as a feedback, it would be really nice if there were a way to see and easily access all of the variables used in a report from one location instead of going to the dataset, the report, and then to the individual groups (if needed) to see the variables. Also, it would be very useful if Group-level variables can show up in the Expression Builder as well.
View 2 Replies View RelatedI've gotten to the point of publishing the new reports on the SSRS server and have run into the following problem.
I use a field in the primary report with the "Go to report" action to open up another report (also published) for more details. It works properly from within ReportBuilder (2.0) using the report server and I can go to and from the secondary report as I expect. Its passing the correct parameters to the second report and its runs.
But when I use the reports from the SSRS web, the Go To link no longer works. Mouse hover shows its still a link but clicking goes no where. I can run both reports independently from SSRS and they still work.
I've tried this in IE and Chrome with no luck in either. I also poked around at Compatability view and popup blocker but nothing made any difference.
I'm still receiving the emails of some subscriptions of reports that were already deleted, how these subscription could be deleted or turned off.
View 2 Replies View RelatedI have a requirement where i have to display some data in the form of multi column but the main report should be in a standard one.I have tried by using sub report as multi column and used that in my main report but when i preview the report it is considering it as a normal report.Do we have any feature in SSRS to have both multi & standard report layouts in one report.
View 4 Replies View Relatedi just clicked on Advanced mode in Column Group, and then in Row Group Side i set Fixed Data=true for first top static. I'm using local report not server report and i'm displaying that local report in Reportviewer. Now also its not working....
View 6 Replies View RelatedI'm using SQL Express with Advance Services & I get this error when I try to deploy my reports. Why do I get this error
An error has occurred during report processing. (rsProcessingAborted)
Cannot create a connection to data source 'EDPSYS'. (rsErrorOpeningConnection)
The feature: "Remote access to report data sources and/or the report server database" is not supported in this edition of Reporting Services. (rsOperationNotSupported)
Justin Song