Reporting Services :: Report Design In Points (pt)
Apr 24, 2015
On our project we export SSRS reports to Excel. Report Definition Language (RDL) enables you to use several measurement units (for example, inches, pixels, centimeters, and points) to specify position and size values. However, Excel uses only points. Therefore, the SSRS Excel rendering extension converts the height and width of the table, the heights of the rows, and the widths of the columns to points.
This process may include rounding some values. In this situation, the table height or width and the sum of the row heights or column widths are different. To compensate for the difference, the SSRS Excel rendering extension inserts a small row or column to the workbook.
To prevent that ‘hidden’ row or column, we configure the table height and width to a value specified in "pt" (points) rather than "cm". 1 cm is about 28 points. Is it possible to configure SSRS to use points by default while designing a report?
View 2 Replies
ADVERTISEMENT
Mar 6, 2008
How can i write diffrent Queries in Data set using If...Else Conditions at the time of report Design.
Regards.
View 9 Replies
View Related
Nov 6, 2015
I have a report that I need to develop in landscape format. Also I need it to be landscape when converting to PDF and taking printouts. let me know the exact height and width measurements in inches for the report and report body?
I need the margin to be 0.5 inch.
View 4 Replies
View Related
Nov 13, 2007
When I am working on an Integrations Services project and I open a Reporting Services file, it displays it in the Code view. Is there a way to display it in the Design view? Or do I have to close the project and open up a Reporting Services project?
Fred
View 1 Replies
View Related
May 18, 2012
I have a very frustrating problem. But given that this is a development forum, I'll keep that for my 'Envelope Lickers Rehab' and instead talk about an issue I'm having.
I have a very large query (line-wise) that executes in less than a minute when run from the SQL Management Studio as well as via Excel Services.
It is a stored procedure with one parameter. When I try to prime the designer with this query it gives me the following message:
"Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
The statement has been terminated."
I've considered cracking open the xml source and manually creating the fields, but I'd rather not go there.
View 8 Replies
View Related
Mar 22, 2009
Is Format Painter is available in SQL Server Management Studio Report Design?If not, any other way can we copy format?
View 4 Replies
View Related
May 19, 2015
How do I design reports so they look good when viewed online?
Is there anyway for it to render nicely on a particular resolution or screen? Never done any web dev, so not sure if I am missing something.
At the moment I am just designing the report so it looks right on my box.
However by trying to maximise the space when viewed online, it means exporting to pdf ends up being a disaster.
View 3 Replies
View Related
Sep 24, 2015
In my report I am having one calculation filed, in that field I want to display only two values before decimal point.
For example, if I am having calculation field value as 3456.54, I need to display as 35.54 or 34.54.
View 3 Replies
View Related
May 29, 2015
I have this issues with empty points in a Line Chart. How to make it work with dynamic values in the series and some dates in the category, how to join the "data" values for a "series"where there are no category value. So far I cannot see any fix that would make it work by joining the data points with the "average" data on a empty point (no category value) and with the same color on the line.
View 2 Replies
View Related
Jul 27, 2015
I have a scatter chart in SSRS (SQL Server 2012, Visual Studio 2010) that is producing the following:
There are five data points on there, however the result set I am using has 10 rows (a 'Completed Date' of datetime and a 'Lateness' integer whose values can be positive or negative.
This is the Dataset and the results it produces:
SELECT DISTINCT TOP 10
a.ACTIVITY_NAME As [Activity Name]
, ad.COMPLETED_DATE As [Completed Date]
, ad.DAYS_LATE As [Lateness]
FROM ACTIVITIES a
JOIN ACTIVITY_DATA ad ON ad.ACTIVITY_ID = a.ACTIVITY_ID
[code]....
How can I tell SSRS to show every data point in my chart?
View 7 Replies
View Related
Apr 26, 2007
I am new to Reporting Services, and I would like to serve up SQL 2005 Reporting Services reports via an ASP.NET web app (possibly using Report Viewer controls in Server mode). The web app will be running on an IIS server outside the firewall.
I would prefer to have the Reporting Services server be inaccessible outside the firewall, but it seems that the client browsers need direct URL access to the Reporting Services server. I guess this means either locating the Reporting Services server outside the firewall, or opening a hole in the firewall for access to the Reporting Services server.
Is there a Microsoft best-practice methodology/white-paper that addresses this scenario (especially as regards security concerns)?
Alternately, would it be possible, and would the same report presentation functionality be available (reports with expanding/collapsing sections, choice of export formats, etc), by calling the Reporting Services web service directly from the ASP.NET app, and manually populating the Response object?
Thanks. Any help would be appreciated.
View 3 Replies
View Related
May 20, 2015
when I try to open the SSRS in BIDS ( VS 2008), it is displaying the code portion alone. If i click 'View Designer', it prompts me like "....already opened. Do you want to close?" Only XML content of report is displaying. if I click 'Viee Code' then it displays error like "There is no editor available for 'c: eport Sample. rdl'.Make sure the application for the file type (.rdl) is installed."how to correct this issue by installing or by upgrading?
View 6 Replies
View Related
Sep 9, 2015
I just created a report builder. I have a main report and i wanted to create a sub report. why i cant or i cant view the path or the folder of my .rdl file to be use as my sub report.
View 5 Replies
View Related
Mar 12, 2007
Hi There,
Our DBA has installed reporting services on a server and now in order to access the report manager, one has to be an Admin on that Server. I am guessing that there is a mistake in the configuration of Reporting Services. Usually it should allow anybody who was added to the roles in the properties section of the Report Manager, right? I have also added the users to the DB..
Also I am using Windows Authentication to access Report Catalog items (Reporting Services is installed on Server2) from a web Application(deployed on Server1) and displaying the report using report viewer. For some reason, server1 has to be in an Admin role on Server2 to access the report catalog/report. This is kinda strange for me as I don't want everybody to be an Admin on Server2. Can anybody please point in the right direction?
Thanks.
View 3 Replies
View Related
Nov 3, 2015
Is there any way to get the report toolbar using SOAP Api in SSRS reporting.
View 6 Replies
View Related
Nov 3, 2015
When I click on the DataSet Query Desginer there is an Error Source:.NetSqlClient Data Provider. why this error comes and I have executed the SQL query in SSMS succesfully and the result comes. However this is causing the report from the report manager to fail.
View 8 Replies
View Related
Oct 9, 2015
I have done the following and a domain user would not access report created a login to the SQL server to the user (this SQL Server is where data source DB is)went to site setting in Report Manager and made this use a system userright clicked on report folder and made this user in the browser roleeven checked that in the report in question, the user is already in the browser role Still the user would not access the report! "User .......... does not have required permission" is the error message I am getting.
View 6 Replies
View Related
Jul 5, 2012
I have written a report visual studio. The report has 10 multi-value parameters that pull data from their individual data sets within the reports. When running the report from within Visual Studio it renders fine. There are no errors reported, only a warning related to a pathname I have use to retrieve image data and display on the report.Deployment of the report is error free.When I view the report I briefly get the "Loading" splash window, but then nothing. None of the headers or static text is displayed. The results window is blank.
The report defaults all the parameter values. In trying to debug the issue I have found by reducing the number of parameter values the report will render. Once I have all the values added, the report does nothing.Below is the query being used for the report. The where clause in the query shows the parameters being used and the syntax.We are running on Windows Server 2008 R2 and SQL Server 2008 R2.
Ralph
SELECT RTRIM(a.ITEMNMBR) AS Style, RTRIM(a.ITEMDESC) AS Description, a.ITMSHNAM AS UPC, c.LOCNCODE AS Store, d.LISTPRCE AS ListPrice, a.CURRCOST AS Cost,
a.USCATVLS_1 AS [Main Category], a.USCATVLS_2 AS Market, a.USCATVLS_3 AS [Alternate Retail], a.USCATVLS_4 AS Country, b.ITEMXTRAS_1_Type AS Type,
b.ITEMXTRAS_2_Finish AS Finish, b.ITEMXTRAS_3_SubCategory AS SubCategory, b.ITEMXTRAS_4_Department AS Department,
[code]...
View 7 Replies
View Related
Nov 23, 2015
We are about to implement SSRS reports (SQL Server 2012), and have found one issue we don't like. The report looks great when we open it in pdf format. However, when we open it in Excel format, we want it to be the raw data, not look like the pdf report. I tried the simpl headers, and that removed the page header/footer. However, the report format was still in play.In other words, we would like the report when opened in Excel, to look just like it does when we open it as a CSV.I have tried to modify the config file a couple of times. Here is my latest attempt:
Extension Name="CSV" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering">
<OverrideNames>
<Name Language="en-US">CSV (comma delimited)</Name>
</OverrideNames>
</Extension>
<Extension Name="CSV" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering">
<OverrideNames>
<Name Language="en-US">Excel (csv)</Name>
</OverrideNames>
</Extension>
Essentially I have set Visible = "false" for the Excel type, and tried to duplicate the CSV, changing the name to make it look to the user like it is "Excel". This fails. I checked the event viewer, and I see two entries.. The RSReportServer.config file has been modified. (Information)The value for UrlRoot in RSReportServer.config is not valid. The default value will be used instead.I literally took the file, opened it in Notepad, pasted in my changes, from another notepad window, and tried to run the report. I did not see EITHER of the two names I expected, using the OverrideNames tag. As I said earlier, I was able to affect the outcome, by setting SimpleHeaders to true (or however it is identified). That did work in that the page header and footer was removed.
View 6 Replies
View Related
Sep 21, 2015
I have a ssrs report having 2 tables in with 4 columns in each. When I go to export option in preview I can see all data coming in one excel sheet, But I am trying to get 2 tables in 2 different pages in Excel when I export.First page of excel comes with first table data with 4 columns and second page of excel comes with second table data with 4 columns .
View 2 Replies
View Related
Apr 16, 2015
I am working on reports in SSRS 2008 (not R2)... There are some reports with parameters that are hidden when the report is accessed through normal URL using ReportViewer.asx..The thing is that these hidden parameters need to be visible when the report is accessed using SSRS Report Manager.
View 3 Replies
View Related
Jun 29, 2015
I'm wondering how to print a SSRS report without bringing up a report viewer. Is there way to print(PDF format) the SSRS report in the web application( .net ) directly from the "print" button without bringing up a report viewer?
View 2 Replies
View Related
Oct 28, 2015
I have a report builder drill down report. I have row groups with totals. It looks like the attached. The problem is when the report is not expanded the Grand Totals column is not accurate... it is displaying the totals of one of the rows when expanded.The expression in the Total Show text box is
= Switch (
MID(Fields!protocol_id.Value,1,7)="THERAPY",
Sum(IIF(Fields!status.Value = "CO", CDbl(Fields!TX_CO.Value), Nothing)),
MID(Fields!protocol_id.Value,1,7) = "GENERAL" and MID(Fields!program_id.Value,1,6)
= "INTAKE", Sum(IIF(Fields!status.Value = "CO",
[code]...
Is there any way to not display the expression in the Total columns unless the report is expanded?
View 2 Replies
View Related
Aug 28, 2015
I have few reports under different folders in Report Manager. Is there a way to set the data source for the whole folder rather than each report individually? There is also a folder where reports generate dynamically. Since the report project doesn't exist anymore, I can't set the data source through code. How can I set the data source for the whole folder?
View 7 Replies
View Related
Oct 15, 2015
I was able to log in to SSRS report manager. But i was unable to run a report i designed on report builder.
It prompts for login when i wanted to run the report and i used the same windows authentication to sign in
It will show me the parameters but when i click on view report it gives this error
"Data source 'DataSource1': An error has occurred.
Details: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'DataSource1'. ---> System.Data.SqlClient.SqlException: Login failed for user 'Acc-11Admin'."
View 4 Replies
View Related
Jul 20, 2015
I want to repeat line on each page of report on PDF while using 2 columns on report. The problem is that if i use table border it will also repeat after second table. i want a line between two tables.
View 14 Replies
View Related
Apr 28, 2015
We are generating excel report using report viewer at run time but if excel report having more then 65000 record generating error Microsoft. Reporting Services.OnDemandReportRendering.ReportRenderingException: Excel Rendering Extension: Number of rows exceed.
View 2 Replies
View Related
Sep 16, 2015
I am trying to develop a report from cube,and it has one drill through report.when i click on sales amount field on main report,then it open the drill through report with details.Here i passed the **(category,subcat,product)parameters(Cascaded)** to drill through report in action part of main report.In my main report i have two columns .
columns are **Level** and **Salesamount**.
Values are like
**[-]category** **100**
**[-]subcat** **50**
**product** **30**
when i click on 100, parameters are passed & it open the detail report correctly, but when i click on 50,the values for subcat parameter is not getting values in detail report and same as the product also.
Here i used the expressions in parameter values
**pCategory**----iif(inscope(category),!fields.category.value,split(join(Parameters!category.value,","),","))
**psubcat**----iif(inscope(subcat),!fields.subcat.value,split(join(Parameters!subcat.value,","),","))
**pproduct**----iif(inscope(product),!fields.product.value,split(join(Parameters!product.value,","),","))
View 3 Replies
View Related
Oct 6, 2015
How do I get data on my linked report based on my grouped subtotal and grand total from the main report. The subtotal and grand total are calculated columns.
I have a 3 columns in my matrix in the SSRS summary report. Actn_COAST, ActnCITY and NumbOfAccts.
The following is code for my summary report. The results are shown below.
SELECT Distinct ActnCITY, Count(ACCT) as NumbOfAccts,
CASE WHEN ActnCITY in ('NY', 'OH', IN, 'NJ', 'SC', 'NC') THEN 'EAST COAST'
WHEN ActnCITY IN ('CA'. 'NV', 'UT', 'WA', 'OR') THEN 'WEST COAST'
ELSE 'OTHER'
END AS Actn_COAST
FROM tbl1
where ACTNDATE between @STARTDT and @EndDT
Code for my detail report contains the following SQL
SELECT * FROM tbl1 where ACTNDATE between @STARTDT and @EndDT AND @ActnCITY = ActnCITY
I have linked my report based on the NumbOfAccts column. I am able to get data if I click any of the NumbOfAccts values related to the state I want. However when I am not sure how to make the subtotal and grand total work. I want when I click on the subtotal of either coast, I should be able to see records of that coast e.g., if I select 37 I should be able to see all the records in East Coast. If I click on the Grand Total, I only want data related to those 2 coasts.
View 2 Replies
View Related
Feb 8, 2015
Is there a way to subscribe SSRS report using dynamic parameters for email and trigger the report from autosys job so that report should generate the exact time the job is triggered.Let me describe, my SSRS report should be triggered on success of one autosys job. i need to send email parameter and time of report schedule from this autosys job.
View 3 Replies
View Related
Sep 5, 2007
Hi,
I'm having problems navigating from one report to another one if the second report has a multi-valued report parameter. When I navigate to the second report, I don't pass any parameters, but I get an error "parameter is missing a value" for the multi-valued report parameter. I have it setup as allow "multi-value" and "blank value". Any idea what the issue might be?
Thanks.
View 3 Replies
View Related
Jun 22, 2015
How to display the logo in middle of report header , The logo is embedded in the Image folder . The column of the report are static. we are using SSRS 2008
View 6 Replies
View Related
Apr 21, 2015
I have a SSRS report with 4 sub reports embedded. Previously i faced a situation where sub reports was getting displayed with static data even if there is no data being pulled from data set. I solved this problem according to solution provided in my previous post here. Now blank space is getting displayed in place of empty sub report. But still the main report that hosts empty sub report (Which has a header with header name coming from main data set) is getting displayed. Is there any way wherein the whole main report can be suppressed when the sub report has no data?
View 3 Replies
View Related
