Reporting Services ReportViewer Page Is Not Displaying The Report
Aug 14, 2007
Hi
I had a problem accessing our report manager via the web front...
We deleted the virtual directories in IIS and then recreated them... this required us to make a change in the rsWebApplication.config file to include the URL in the ReportServerUrl tag before we could access the site again.
Now we have access to the site but when we attempt to view a report that we deployed to it - the report fails to render and returns a rsReportNotReady error, even though the report doesnt use a snapshot.
Furthermore, the strange thing is that the filters for the report don't display in their own collapsable bar as they used to before... they just display on the white part of the page. Neither does the reportviewer toolbar display properly. It appears as labels and textboxes going down the page and not in a toolbar as you might expect...
any help is appreciated... we suspect that it is some kind of configuration issue, but we have no clue where to begin...
I have a report that displays fine in VS 2005 (in the Preview tab), and if I hit it via a URL in IE as a deployed report. However, when I embed it in a ReportViewer control for display on a web site, I get no data back for the report. I am using an Oracle database for the data source. None of the the logs in reporting services show anything wrong, there are no events in the event viewer to indicate any problems, Oracle logs also show no problems and no errors are returned to the page when the "View Report" button is clicked.
I have created .RDLC file/report in MVC, but in Report Viewer when i try to display next page, i am unable to see the next page. it is just displaying the first page data and charts only.
I have created one reports but all the records are displaying on one page.find a solution to display the records page by page. I created the same report without group so the records are displaying in page by page.
I tried to open a SQL Server 2005 Reporting Service report in ASP.Net 2.0 using ReportViewer. The following is my code.
Dim param(2) As Microsoft.Reporting.WebForms.ReportParameter param(0) = New Microsoft.Reporting.WebForms.ReportParameter("ProjectID", Me.cboProject.SelectedValue) param(1) = New Microsoft.Reporting.WebForms.ReportParameter("RunBy", Session("strEmployeeName")) Me.ReportViewer1.ServerReport.SetParameters(param)
Me.ReportViewer1.ServerReport.ReportServerCredentials = New _ clsReportServerCredential(System.Configuration.ConfigurationManager.AppSettings("strReportViewUser"), _ System.Configuration.ConfigurationManager.AppSettings("strReportViewPassword")
Me.ReportViewer1.ServerReport.ReportServerUrl = New Uri(http://SQL2005/ReportServer/) Me.ReportViewer1.ServerReport.ReportPath = "/nsPortalReports/rptIssuesByRole" Me.ReportViewer1.ServerReport.Refresh()
I need help with passing multiple parameters. I got an erron on the second parameter (parm(1)). The error was
"Overload resolution failed because no accessible 'New' can be called without a narrowing conversion: 'Public Sub New(name As String, values() As String)': Argument matching parameter 'values' narrows from 'Object' to '1-dimensional array of String'. 'Public sub New(name As String, value As String)': Argument matching parameter 'value' narrow from 'Object' to 'String' "
I have designed plenty of reports in VS 2005 and have been deployed on the reporting server. I have been designed one web page which shows UI through which user can access which ever reports he/she wants. I have kept some buttons on UI. When button is clicked appropriate report accessed and displayed on the browser.
Problem is that, report width is about 40 - 50 % of the screen and report viewer shows the report on the left align of the screen. I just want to show the report at the center of the screen. Also, any property I can use to set the report size in the proportion of screen in Percentage(%).
I have written a sql query which gives me data in report in below format..Need to display data in following format
Client data row has nothing to do with address data row Client are just a distinct list of Client and do not line up with any address . In other words, the order and vertical alignment have nothing to do with the address on the right.
I have a report with 6 parameters..in that first 3 param having 23,000 values and last 3 are having 50 values each. If i see preview the report is coming fine and result is displayed properly. But, if i deploy the report in server and click the report ..then all parameters taking values but nothing is seen in report body ...its blank..
in any browser its blank.. atleast table structure also not displayed ..simply page blank.
I have database fields that contain RTF text. If I use the default Textbox in SSRS 2008 Report Designer, I get all the RTF formating characters, which makes for a VERY ugly report.Is there another control I can place on my report that will take the RTF formated text and display it properly? I can do this in Crystal Reports, but I'm converting to SSRS 2008 so I need to be able to handle RTF formated text.
I am facing a strange issue with regards to generation of a report from my application in in Live. One of our client is using a report “Auditors Report”. When I try to generate the report for period of 1 month i.e. from 01 May 2015 – 31 May 2015, the report fails when the data is bound to report control. However if I try to generate the report for period of 1 day or 15 days for within the same month, report gets generated.
Now the same application and same database when attached to our local machine, the report gets generated properly for 1 month. I am not sure why the issue is coming on the server.
I tried to export a reort using SQL 2005 Reporting Services. However Iam getting the following log on the screen : [logs After upgrading the SQL 2005 with SP2 ]
Execution 'ssem4cntbzve525531im5aup' cannot be found (rsExecutionNotFound) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.Reporting.WebForms.ReportServerException: Execution 'ssem4cntbzve525531im5aup' cannot be found (rsExecutionNotFound)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
I want to repeat line on each page of report on PDF while using 2 columns on report. The problem is that if i use table border it will also repeat after second table. i want a line between two tables.
I have a Report In that report I need to break out company code and export this report on excel and each company code shown its own tab in excel .I just add image about report details.I tried this issue but i cant get the exact names on excel sheet.
I am trying to embed a Reporting Services Report in a aspx page. I have the report embedded in the page but I am having difficulty passing a parameter to the report and getting the report to run within the page. Any information is appreciated.
I have a report which shows around 8 columns. The report is in landscape mode(Width -11in and Height-8.5 in). I want to display only header in the first page means basically I want to add a cover page.
I have used tablix to display data. To display an empty page, I have added a rectangle before tablix and made add a page break after true. But while exporting to pdf, I am getting 2 blank pages with header. But I need only one.
I am fairly new to reporting services and recently created a simple tabular report. There is one table which queries the database and I would like to change the table so there are more than 25 rows of data per page. How do I do this? Also it would be advantageous to know how to set the report to only create a new page for every different item in a column. E.g., if I have various data for each date, I would like to only create a new page when the date changes so that all data for a specific date is on one page etc etc.
I created a subreport1 with tablix.I created second subreport2 that has a tablix and one column chart and both are placed in a rectangle. No page break is applied to this rectangle. When I run the sub report, both tablix and Column chart are displayed on one page .
I created a main report and added Subreport 1 and Subreport 2 in 2 different rectangles. I set page break property of Rectangle(Subreport1) to End and no page break is applied to Rectangle of Subreport2.
When I run the main report, subreport1 is displayed in one page, subreport2 is displayed in 2 different pages.
Report in question is an invoice form. It requires an absolutely bottom-of-page aligned footer that has databound elements. This is so that whatever page that footer finally appears on will print in such a way that the address will align in a windowed envelope. Ironically, Books Online gives this exact scenario in explaining headers and footers in SSRS, but they cleverly don't explain how an absolutely bottom-of-page-aligned and data-bound footer can be made to happen. Headers at absolute page top is obviously no problem. Footers at page bottom, not so much.So, this is not a "page footer"--page footers are employed in the body. Also this footer is databound, so a page footer as it's known in SSRS is out the window anyway.
Most of the time this will print on a single page, but if it breaks to multiple pages, that footer needs to go all the way to the absolute bottom.I grasp that the "report footer" for SSRS is just what appears at the end of any repeating controls that you've implemented in your body. Because SSRS uses this kind of repeating-control based idiom rather than a section-based idiom as Crystal does, this kind of (what I would consider very basic) positioning control is looking fairly impossible right now.Among what I've tried:
--Page footer (can't; databound) --Specifying a page break after the pre-footer controls, and/or a page break before the controls that make up the footer in their properties. This leads to unpredictable results with blank printed pages (as many as 8 for what previews as a 2-page report, how silly is that?). --Putting in a page-height rectangle as part of the footer (with and without the page breaks mentioned above), with the idea of forcing a basically blank page at the end of the report so that the footer will go to the bottom. SSRS will go ahead and break the page anyway on long elements like that, which again leads to the "footer" being printed in the middle or top of the final page, or whereever it happens to fall.
I may be having to explain to my client that you can't get there from here, and they may have to redesign their report.
Is it possible to have different chart (having their dataset from same shared datasets) like six on one report, then secondly can they all respond to same parameter filter.
I have created the matrix report which has dynamic column, it grow columns(18) based on the 'MCU' field in PRD.MI table. I have added the 'MCU'(A,B,C,D,E,F,G,H,...Q) on 'Columns' in matrix table, to create matrix report and I have added 'mcst' on 'Data' in matrix table and I have added the 'msp2' on 'Rows' in matrix table. I have created new column after row and I added USP2DS.Final output is as given below.I need the split the matrix column per page.
I have added the 'MCU' on "Column group and 'msp2' on Row group.
Query: select mi.*, SUBSTR(SM.USP2DS,6,9)AS DESC from (SELECT a.mcu , a.msp2, SUM(a.mcst) AS Cost FROM PRD.MI as A WHERE a.myr=2015 and a.mpr=7 GROUP BY a.MCU, a.msp2 order by a.mcu, a.msp2 ) mi, (SELECT DISTINCT U_SP2, USP2DS FROM UM.SM) SM WHERE A.MSP2=SM.USP2 ORDER BY MCU,msp2
I have tried the below post, but I am not able achieve my output. [URL] ....
I created the report, which has 4 pages. Each page contains bunch of tables and charts, which display data in scope of dataset, created for each page and reflecting certain subject. Each page also has Header and Footer.
My users requested, the report has possibility to include or not include data on Page #4.
Other words, report should display 3 or 4 pages based on the entered parameter.
1. I created parameter named “Include #### metrics”, which contains options: Y, N 2. For each object on the page 4 I added dependency on the selected parameter in the visibility option.
Now if user select parameter Not include Page #4, report displays 3 pages as expected and page #4 is empty, but with Header and Footer.
The problem: Their preference is to not to show page 4 at all if someone chooses to not to include #### metrics.
My question is how to force the report to display just 3 selected pages.
I created a report with a parameter. The parameter was created using a dataset in the report designer. This works fine. I deployed the report (webhost4life) and the report runs fine in the report manager. I am able to select my casenumber click on the default view report button and it works.
Problem: I embedd the report into an aspx page frmReports1.aspx. I call this page from another page (form). the frmReports.aspx page comes up and displays the default drop down list box with the casenumbers (fine). I select the casenumber and click on the view report button and NOTHING. I here the postbacks taking place but all that happens is the default value appears in the drop down list box and the toolbar shows. I checked permissions and everything is fine. I searched the forum and thought i found the solution with the inLine HTML and Async (still nothing) I can only think that something is not going right with the parameter. Here is my html, and code behind code. any help would be greatly apprcieated.
Public Function GetFormsCredentials(ByRef authCookie As System.Net.Cookie, ByRef userName As String, ByRef password As String, ByRef authority As String) As Boolean Implements Microsoft.Reporting.WebForms.IReportServerCredentials.GetFormsCredentials
End Function
End Class
Public Function GetFormsCredentials(ByRef authCookie As Cookie, _
ByRef userName As String, _
ByRef password As String, _
ByRef authority As String) _
As Boolean
authCookie = Nothing
userName = Nothing
password = Nothing
authority = Nothing
'Not using form credentials
Return False
End Function
Protected Sub form1_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles form1.Load
'ReportViewer1.ServerReport.ReportServerCredentials = New MyReportServerCredentials()
'rvTest.ServerReport.Refresh()
End Sub
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
rvTest.ServerReport.ReportServerCredentials = New MyReportServerCredentials()
is it possible to separate Grand Total of a sub group to a new page?
I tried using advanced mode, find the first line the Grand Total section and set its "RepeatOnNewPage" to true, but, when I execute the report, it will throw an error something like the value of RepeatOnNewPage of the TablixMemeber must be the same as its previous object.
I need my report pages to separate by subGroup(SubGroupA, SubGroupB, A+BTotal).
I have a set of SSRS reports published on the server. It can be accessed through a web application or through SharePoint. Most of the reports work fine through both - web app and SharePoint. However, one of the report, which returns large amount of data has some problem:
1. It generates fine from web app 2. It generates fine from SharePoint; only if one or two values selected from Filter dropdown 3. However, if all items (about 20 items) selected from Filter dropdown... and click on View Report, it processes for a while and then shows nothing. The page remains blank.
Did some research and felt the problem is with Distributed Cache Service.
I have a report parameter called para1 which is a drop-down list and what I want to do is display another report parameter based on the para1 selection.
So for example, para1 contains a, b, c choices. if a user selects b, I would like para2 to display but if the user selects a or c, I don't want the para2 to display.
I'm still quite a beginner with the Report Designer and now I have faced a problem. My goal is to make a reports refresh each time it is loaded. I know that this can be done by using rs:clearsession = true-method but in order this to work, it should be added to each link. There are a lots of links in the reports we are using and therefore it would be more practical to find another way to refresh the report on page load. Is there any way to do this with some kind of code attached to each report? I'm using Visual Studio 2003 and my Reporting services 2000.
We have the customer requirement to display the footer of a SSRS Report fixed at the absolute bottom of a DIN A4 format page. The footer contains information like company address and stuff.
I searched quite a while on this topic and only found workarounds for SQL Server 2005 with Custom Code in the SSRS Report to calculate the size of the body content and then insert some empty lines to get the space needed to push the footer to the bottom of the page. But this won't work in SQL Server 2012. And I wasn't able to figure out how to achieve this yet.
I have a strange problem that basically consists of showing a report in Internet Explorer and then using the same Internet Explorer window to show an asp.net page that contains some form where the user can enter some data. In this scenario, the form won't be processed on the server. I really need to know why and how I can work around this problem.
Precisely the problem can be reproduced like this:
Environment: Server: Windows 2003 Standard Server SP1 (German), IIS 6, Client: Windows XP SP2, Internet Explorer 6
First I open a new Internet Explorer Window and let it show me a Reporting Services Report (by entering its url into the address bar). Everything works. Then I change the address to a simple web application's address that is built with asp.net (.net 1.1). The application contains only a form with a submit-button, a text box and a label, that shows the textbox' text after submit was clicked. But when I click the submit button, although the form seems to have been sent to the server (the green progress bar in the status bar is flickering), it's reset. So the label does not show the value I have entered into the the textbox and the textbox itself is cleared. This only happens when the browser was first showing a Report from Reporting Services, so when I open a new Browser Window and go directly to the web app, everything works fine.
It does not happen when I open the Browser directly on the server.
I am invoking RS web services to render reports, using Apache Axis to generate stub classes from Reporting Service WSDL.
Please let me know if I can integrate Report Viewer control in the jsp where I am writing the report output. Else do I have to create my own custom tags simulating ReportViewer functionality.
