Reporting Services :: Reports In BIDS Does Not Update When Stored Procedure Is Modified
Jan 3, 2014
I am using SQL Server 2008 R2 SP1, and BIDS 2008 SP1. The problem I am about to define does NOT happen when the report is deployed to the report server, but only within the report development environment (BIDS).
From within BIDS my reports are fed by stored procedures. The problem is when I modify a stored procedure in Management Studio, and refresh the report from within BIDS, the report does not reflect the new changes made in the stored procedure. So far I have found one clumsy solution to this problem:
1) Go to the folder where the project is saved on the file system.
2)Find the ".data" file that is associated to the particular report, then delete it. For instance, if my report name is TestReport.rdl, find the file named TestReport.rdl.data, then delete it.
View 3 Replies
ADVERTISEMENT
Nov 20, 2015
I run these stored procedure to build the report and I am able successfully to build the report but I need some prompts to in the report to get the specific data .
ALTER
PROCEDURE [dbo].[Sharepoint_Ticket_Report]
@StartDate
DATETIME,
@EndDate
[Code] ....
And for prompts how to create created_by and message_type dropdowns as shown in picture.
View 7 Replies
View Related
Apr 13, 2008
Hi,
I want to retrieve the values from store_geofence table where the timeduration exceeds certain interval
the procedure is as below
CREATE
procedure [dbo].[GeofenceByCustomer]
@regno nvarchar(50),
@frmdate nvarchar(50),
@todate nvarchar(50),
@Geofence nvarchar(50),
@interval int,
@userid nvarchar(50)
as
begin
declare @val int
Declare @strSql as nvarchar(3000)
Select @val=count(*) from basestation where superuserid=@userid and
base_station_name=@Geofence
--if(@val=0)
begin
create table #templ(registrationno nvarchar(50),basestation
nvarchar(50),entry_time datetime,exit_time datetime,duration
int)
select @strSql='
insert into #templ(registrationno,basestation,entry_time,exit_time,duration)
select
registrationno,basestation,entry_time,exit_time,datediff(mi,entry_time,exit_time)
as duration from store_geofence where entry_time>'+@frmdate+' and
exit_time<'+@todate+' and datediff(mi,entry_time,exit_time)>'+@interval+'
and basestation in ('+@Geofence+') order by entry_time,registrationno'
execute (@strSql)
print @strSql
select * from #templ
drop table #templ
end
end
GO
I should specify the duration in int to take affect
datediff(mi,entry_time,exit_time)>'+@interval+'
but i do not know how to rewrite this path
i cannot put as
datediff(mi,entry_time,exit_time)>'+@interval+'
it returns an error
Syntax error converting the nvarchar value '
insert into #templ(registrationno,basestation,entry_time,exit_time,duration)
select
registrationno,basestation,entry_time,exit_time,datediff(mi,entry_time,exit_time)
as duration from store_geofence where entry_time>01/01/2008 and
exit_time<01/01/2008 and datediff(mi,entry_time,exit_time)>' to a column of data type int.
How should i rewrite it
please help
regards
cmrhema
View 2 Replies
View Related
Sep 21, 2015
I am working on SSRS 2008 R2 in BIDS. The report's data source is from Stored Procedure which is running good in SQL Server 2008 R2.
The stored procedure has an output parameter, which I don't know how to set in BIDS, so when I try to add the data source to the report, a mistake is shown up.
So my problem is:
1. How to set the output parameter correctly, so the data source(stored procedure) can be run as good as it were in SQL Server 2008 R2.
2. How to get the output parameter value in BIDS which will be used to set the title of table dynamically.
View 6 Replies
View Related
Nov 5, 2007
Hello SQL Server Experts, Data Analysts, and Report Writers et al:
re: Reporting Options with SQL Server
I wanted to propose an offshoot to the pryor thread:
Would anyone take a stab at comparing Access Reports, Crystal Reports,
Cognos or other options to all the Reporting Services and its components offered as part ofSQL Server, especially as to extracting data from SQL Server into a report format?
I guess this is a far as capabilites, ease of use, limitations, and especially formatting
or presentation of the end report product?
Thank you to all, and I hope this is a beneficial discussion to others.
Hal1490
Hal9000
View 4 Replies
View Related
Feb 24, 2007
Hi
I have created CLR Stored Procedure and my CLR stored procedures are not appearing in the Stored Procedures drop-down list located on the Data tab within the VS2005 Business Intelligence Development Studio. After Creating the dll I have registered the dll like that CREATE ASSEMBLY MY_SP_NAME from 'C:MY_DLL_PATHMY_DLL_NAME.dll' WITH PERMISSION_SET = SAFEAfter registering I have deployed the dll :CREATE PROCEDURE [dbo].[MY_SP_NAME] @dbname [nvarchar](4000), @varTable [nvarchar](4000), .............. .............. .............. ASEXTERNAL NAME [MY_DLL_NAME].[MY_CLASS_NAME].[MY_SP_NAME]GOEXEC sys.sp_addextendedproperty @name=N'AutoDeployed', @value=N'yes' , @level0type=N'SCHEMA',@level0name=N'dbo', @level1type=N'PROCEDURE',@level1name=N'MY_SP_NAME'GOEXEC sys.sp_addextendedproperty @name=N'SqlAssemblyFile', @value=N'EXAMINER_WORKSHEET_F_hmz4_Ex.cs' , @level0type=N'SCHEMA',@level0name=N'dbo', @level1type=N'PROCEDURE',@level1name=N'MY_SP_NAME'GOEXEC sys.sp_addextendedproperty @name=N'SqlAssemblyFileLine', @value=10 , @level0type=N'SCHEMA',@level0name=N'dbo', @level1type=N'PROCEDURE',@level1name=N'MY_SP_NAME'GOThe Stored Procedure is deployed successfully to SQL Server 2005, but its not showing in the drop-down list located on the data tab while I am desiging my RDL layout.All of the non-CLR stored procedures are present. Is there something I need to do to add these CLR stored procedures?
Please please ASAP.
Thanks
Tareqe
View 4 Replies
View Related
Apr 24, 2008
Hi all,I am using Stored procedure to design report instead of Query.
Problem is i am unable to view the fields in the dataset.
Any body please tell me the Steps to use Stored procedure in Reporting Services design.
Regards.
View 7 Replies
View Related
Sep 26, 2004
I have a big SQL Stored Procedure which works with a cursor inside of it. During the procedure the data is inserted into a table and at the end is a SELECT statement from that table. The problem is that when i create a dataset with that stored procedure and i run it in the Data tab i get the correct select, but in the Fields section of the Report I don't get the fields from the last SELECT, but the fields from the cursor. Am I doing something wrong or is this a bug and how can i fix it.
Thanks!
View 3 Replies
View Related
May 14, 2008
Hello,
I'm having some problems and I wonder if anyone can help me.
I need to call a stored procedure to retrieve some data from the bank and use it in a report.
I'm using oracle DB, but I'm not using ODBC, I'm using Oracle.
I can call the SP using 2 commands:
1- in the dataset data form, I can select the command type as Stored Procedure and write the name of my procedure without the arguments, and then the VS ask for the arguments
2- in the same form, the command type as TEXT, i can use the syntax: call <SP name>(arguments)
My problems are:
-in the first way, how can I programatically set the arguments to send?
-in both of them, how can I define that the data that should be stored in the dataset is in the out cursor parameter?
Thank you,
Oscar
View 2 Replies
View Related
Mar 10, 2008
I have created stored procedure.How can i use it insted of writing Sql Statement in Report Design.
Pls Help me.
Regards.
View 1 Replies
View Related
Jan 26, 2007
Hi all,
I have stored procedures that will run fine from query analyzer windows, from other programs, etc. When I try to run the sp from vs 2005 form with in a SSRS project, the sp just hangs. It will not return any records and the app says "Not Responding. This does not happen for all SP's only some of them. Any ideas?
View 8 Replies
View Related
Dec 19, 2007
Hi,
I am working with one example on SQL Server 2005 Reporting Services. I have a stored procedure with two parameters. I want to call this stored procedure from SQL Server Reporting Services 2005.
CREATE PROCEDURE spEmp
(
@id int,
@name varchar(150)
)
AS
BEGIN
SELECT EmpId, EmpName, EmpSal FROM Emp WHERE EmpId = @id AND EmpName = @name
END
I want to pass
@id AND @name
parameters from reporting services form. Can you please give me link / article / steps to follow this in SQL SERVER REPORTING SERVICES 2005 ?
Thanks
Rajesh.
View 12 Replies
View Related
Oct 21, 2015
Created a report with parameters that can have multiple values.
Ran Stored procedure with same above criteria and data is retrieved
Ran the report and no data is displayed
I am unable to figure out where it might have gone wrong.
View 3 Replies
View Related
Jun 27, 2007
Hello,
I have a report. I need to make a drop-down parameter optional. I've setup the parameter to use a dataset as its source, and I need to allow the value to be null. I've selected allow nulls check box, and I've even tried setting the default value to System.DBNull.Value. But, when the entry is not selected (blank), no data ever comes back. If the data is blank or null, my procedure works (I've tested it). How do I send a null value to the database through reporting services report? I was hoping to avoid creating a special query just for that purpose.
Thanks.
View 15 Replies
View Related
May 2, 2006
I am trying to call oracle stored procedure from SRSS 2005. I am using the syntax { Call s_test_rcur()} . I am getting following error.An error occurred while retrieving the parameters in the query.ORA-00911: invalid characterORA-06512: at "SYS.DBMS_UTILITY", line 68ORA-06512: at line 1
ORA-00911: invalid characterORA-06512: at "SYS.DBMS_UTILITY", line 68ORA-06512: at line 1Â (System.Data.OracleClient)
Here is the Oracel stored proc.
TYPE rc_test IS REF CURSOR;
PROCEDURE s_test_rcur (po_test_rc OUT rc_test, -- returns a record setpo_error OUT INTEGER)ISBEGIN g_err_level := 1;OPEN po_test_rc FORSELECT a.ssn_id,TO_CHAR (a.acad_yr) || TO_CHAR (a.acad_yr + 1) acad_yr,RPAD (NVL (last_name, ' '), 30, ' ') last_name,RPAD (NVL (first_name, ' '), 30, ' ') first_name,NVL (middle_initial, ' ') middle_initialfrom test_tableorder by last_name;po_error := 0;EXCEPTIONWHEN OTHERSTHENpo_error := -1;g_error_code := SQLCODE;g_error_msg :='Err level :' ||TO_CHAR (g_err_level) ||' ' ||SUBSTR (SQLERRM, 1, 250);END;
View 2 Replies
View Related
Aug 21, 2015
I have a stored procedure (sproc) Â running in Firebird Database. Now I try to use this sproc to build a report in the SSRS 2012 (SSDT) Report Designer.
After I connect to the dataset, and when I choose the Query Type as 'Stored Procedure', and type the name of  my sproc, and then go to the Query Designer, and click ! (F5)  ,  I get the following error:
TITLE: Microsoft SQL Server Report Designer
------------------------------
An error occurred while executing the query.
ERROR [HY000] [ODBC Firebird Driver][Firebird]Dynamic SQL Error
SQL error code = -104
Token unknown - line 1, column 1 [sproc name]Â
ADDITIONAL INFORMATION:
ERROR [HY000] [ODBC Firebird Driver][Firebird]Dynamic SQL Error
SQL error code = -104
Token unknown - line 1, column 1 [sproc name] (OdbcFb)
------------------------------
BUTTONS:
OK
------------------------------
how to resolve this? If its a T-SQL sproc, then it will be no issue; in this case, Â Firebird database connects to the SSRS via a 32-bit System ODBC connection.
When I proceed and click ok for everything, I get this error (after I exit the Query Designer), in the Dataset Properties tab:
"Could not update a list of fields for the query. Verify that you can connect to the data source and that your query syntax is correct."
The ODBC connection between SSRS and Firebird works fine. In fact I am able to run many queries as ad-hoc ones, Â but when I use the queries as sprocs, then this issue pops up.
how to handle Firebird stored procedures  in SSRS.
View 2 Replies
View Related
Sep 9, 2015
I have created a query in which I have used first_value, lead, lag windows functions. I tried using the query in SSRS query text, but for some reason it could not load. Then I created a stored procedure and implemented that query in stored proc.
The problem is that I am able to execute the stoured proc from sql server studio, but SSRS is not able to load data.
View 5 Replies
View Related
Sep 17, 2007
I used a stored procedure in my report. If I run the sp in Management Studio (on my pc, database is on a sql server) it takes only several minutes; but from reporting services (also on pc) I put it in the data tab and execute it, it takes forever, actually never finish. I want to know why it's taking so long to execute it from reporting services while it returns data instantly from Mgt Studio. There is cursor in the sp. I don't know whether this is the culprit. Anyone knows why? Thanks!
Below is the sp.
--------------------------------------------------------------------
create proc [dbo].[p_national_by_week]
as
set nocount on
declare @s1 nvarchar(2000), @parmdefinition nvarchar(300), @rangestart smalldatetime, @rangeend smalldatetime
, @price_low money, @price_high money, @weekdate smalldatetime
declare c1 cursor for
--- GG change for reg dates.
select weekdate from vtRealEstate_RealtorListing_WeekDates
open c1
fetch from c1 into @weekdate
while @@fetch_status =0
begin
select @rangeend = @weekdate+7, @rangestart=@weekdate
select @s1 = N'
declare @mlsid_count int, @avg_price money, @avg_day_on_market int, @median_price money, @c1 int
select @mlsid_count=count(*), @avg_price=avg(CurrentPricefilter),
@avg_day_on_market=avg(datediff(dd, FirstListedDate, LastModifiedDate))
from vtRealEstate_RealtorListings
where ((FirstListedDate <= @rangeStart and LastModifiedDate >= @rangeStart) or
(FirstListedDate >= @rangeStart and FirstListedDate < @rangeEnd)
)
and currentpricefilter is not null
and mlsidfilter is not null
select @c1=@mlsid_count/2
set rowcount @c1
select @median_price = CurrentPricefilter from vtRealEstate_RealtorListings
where
((FirstListedDate <= @rangeStart and LastModifiedDate >= @rangeStart) or
(FirstListedDate >= @rangeStart and FirstListedDate < @rangeEnd)
)
and currentpricefilter is not null
and mlsidfilter is not null
order by currentpricefilter
insert report_detail_test (weekdate, mlsid_count, avg_price, median_price
, avg_day_on_market)
values(@weekdate, @mlsid_count, @avg_price, @median_price, @avg_day_on_market)
', @parmdefinition=N'@rangestart smalldatetime, @rangeend smalldatetime, @weekdate smalldatetime'
exec sp_executesql @s1, @parmdefinition, @rangestart=@rangestart, @rangeend=@rangeend
, @weekdate = @weekdate
fetch from c1 into @weekdate
end
select weekdate
, mlsid_count
, avg_price
, median_price
, avg_day_on_market
from report_detail_test
order by WeekDate
View 2 Replies
View Related
Nov 2, 2015
Created a report that displays the Maximum Response time (example of value 00:00:00) which is directly pulled from the Stored proc.When I ran the report, the column displays blank values.I am not sure if I should add any conversion to the Response value in the report.
View 2 Replies
View Related
Dec 12, 2007
Hi
I was wondering if it was possible to call reporting server web service directly from my sql server stored procedure. The call that I need to make to reporting web service needs to generate the report in a PDF format.
View 1 Replies
View Related
Feb 1, 2007
I have a SSIS package that contains a DTS 2000 package in it. The DTS 2000
package imports data into several tables from an ODBC data source. When I
execute the package through BIDS, no problems. Everything works great. I am
now trying to execute the SSIS package in my stored procedure & it gives me
the following error:
Error: 2007-01-30 11:54:24.06
Code: 0x00000000
Source: Populate IncrTables
Description: System.Runtime.InteropServices.COMException (0x80040427):
Execution was canceled by user.
at DTS.PackageClass.Execute()
at
Microsoft.SqlServer.Dts.Tasks.Exec80PackageTask.Exec80PackageTask.ExecuteThread()
End Error
I did a search for this & found KB 904796. It had the exact error message
but I don't believe my packages uses 2000 metadata services. Just to be
safe, I reinstalled the backward compatibility features & the DTS 2000 tools
on the server. That still did not fix anything. I found another forum that
suggested loading the DTS 2000 package internally, which I did & it did not
fix anything. I am using a password for the protection level so that is not
causing my issue. Does anyone else have any suggestions as to what I might be
able to try?
SQL 2005 Dev Ed SP1 & post SP1 hotfixes installed
Win 2k3 server
Thanks!
John
View 3 Replies
View Related
Jun 2, 2015
I have a requirement to display each student Fitness test results in the form of a Box plot chart with High Whisker , Low whisker , Low box,high box , Mean and Median in a stored procedure since test areas are dynamic. But , i have never done this before.
Test Type
TestSeq
Test Date
Student ID
TestArea
Test Result
[code]...
View 2 Replies
View Related
Apr 15, 2008
I have an issue with using multiple parameters in SQL Reporting services where data is passed in from a stored procedure
When running the report in design mode - I can type in a parameter sting and it runs fine
In the report preview screen I can select single parameters by ticking the drop down list and again it runs fine
as soon as I tick more than one I get an error
An error occurred during local report processing
Query execution failed for data set €˜data'
Must declare the scalar variable '@parameter'
Some info...
The dataset 'workshop' is using a sproc to return the data string?
I get multiple values back fine in the sproc using this piece of code
(select [str] from iter_charlist_to_table( @Parameter, DEFAULT) ))
I have report parameters set to Multi-Value
Looking through the online books it says...
You can define a multivalued parameter for any report parameter that you create.
However, if you want to pass multiple parameter values back to a query, the following requirements must be satisfied:
The data source must be SQL Server, Oracle, or Analysis Services.
The data source cannot be a stored procedure. Reporting Services does not support passing a multivalued parameter array to a stored procedure.
The query must use an IN clause to specify the parameter.
Am I trying to do the impossible ?
View 1 Replies
View Related
Nov 9, 2007
Hi
I have written a stored procedure that returns 8 tables.
When I try to design a server report based on this stored procedure, reporting services only recognises the first table and not the other 7 tables.
I am using SQL Server 2005 and Visual Studio 2005.
Thank you in advance
Jav
View 4 Replies
View Related
Apr 24, 2015
I am trying to configure the reporting for TFS using SQL Server. But I get following error when viewing any report:
So I try to manually process the cube to check if it works. I am following this article:Â [URL] ....
When I click on GetProcessingStatus and invoke it (with last field set as TRUE) I get following error:
How to resolve this issue and be able to see the reports.
View 5 Replies
View Related
Jan 12, 2005
I have installed and am using Reporting Services.
I can create RDL files using Visual Studio.NET, but like to offload this task to a minion who does not have VS.NET.
Is there a stripped down something-or-other to make reports that and end user or business analyst could use and then upload the reports?
Thanks.
View 1 Replies
View Related
Aug 23, 2004
Can anyone tell me if MS Reporting Services can import/read a Crystal Reports file as it can an Access report file?
I've seen a few posts out on other boards that there are some companies charging fees for converting Crystal Reports over to MS Reporting Services.
Is there any easier way? Are there any tools out there that can do it?
Perhaps Microsoft should produce such a tool for converting...
Thanks in advance for any help!!
View 3 Replies
View Related
Jul 12, 2007
Crystal reports to Reporting Services
Is there any way I can convert Crystal reports to Reporting Services instead of creating reports again in Reporting Services?
View 3 Replies
View Related
Apr 29, 2015
I have a Manager dashbord  report.In this report 1st page contains some tables and 2nd,3rd page contains line charts with tables.Actually what we need is in 1st page tables are pretty simple,we need to add kpi's and shown these tables in kpi. kpi in ssrs and how to add kpi in ssrs reports?
View 2 Replies
View Related
Nov 30, 2007
We are planning to migrate our crystal reports to reporting services, just wondering if we have cross tab reports in sql server reporting services. Thx.
View 7 Replies
View Related
Apr 30, 2008
I currently have a report on our Reporting Services 2005 server that takes a CompanyID as its only parameter. Also, in our database, we have a list of contacts that are linked to the CompanyID that is used in the report. What I would like to do is email a pdf or each company's report to every contact for that company in our database daily. However I am stuck on how to do that. My project is using C#, but if there is a way to do this directly through Reporting Services I could do that as well. If anyone could help me out I would greatly appreciate it. Thanks!
View 5 Replies
View Related
Jan 25, 2007
I am using Visual Studio 2005 and trying to deploy reports to SQL Server 2000.
I get the following message:
A connection could not be made to the report server http://aklink1/reportserver.
------------------------------
ADDITIONAL INFORMATION:
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. (Microsoft.ReportingServices.Designer)
Please help!
View 4 Replies
View Related
Nov 3, 2004
Hi all,
Currently I have a project that require me to use reporting services (Reports) together with ASP.net web application.
However, I have the following problem.
I have an asp.net web application. From there, I have a textbox whereby user can type a specific date. The specific date should then be incorporate with the sql reporting services. The report that is being generated will contain data that is on the specific date.
How can I do that?
I try to search through the internet but to no result. Can anyone help out?
Thank you so much.
View 1 Replies
View Related
