I want to bookMark from one table to another in current report. Below are the 2 tables , when I select a
FromBrandName in the first table, it should take me to the second table row with the same
FromBrandName. Is this possible? Is there a function to access a specific running value other than First and Last?
I am using 2 charts in my SSRS Report. Requirement is to load the Right side chart based on the click event from left chart.
I can achieve it using go to report option. But the issue is total page getting refreshed while using this option. I feel bookmark option will be the best. But I don't think I can pass a value to Bookmarks.
How to show the CurrentMonthanddateandyear in my report header in ssrs?
1.How to show the currentdateandMonthyear exmple date format like June 29 2015 on my report header.
2.How to change the report rdl name with the same name like EmpUpdatedreportJune 29 2015.rdl ,it is possible to create and change the rdl file name with the current dateandmonth.
i just clicked on Advanced mode in Column Group, and then in Row Group Side i set Fixed Data=true for first top static. I'm using local report not server report and i'm displaying that local report in Reportviewer. Now also its not working....
View 6 Replies View RelatedI have a report where in I want to show each record on a separate page.
So, to achieve that I took a single cell from table control, expanded it and used all the controls in that single cell. This looks nice so far.
Now, I also have to show a sub grid on each record. So I took a table control and added on the same single cell and tried to add a parent group to the table row.
When I preview, it throws this error.
"The tablix has a detail member with inner members. Detail members can only contain static inner members."
What am I doing wrong? How can I achieve table grouping inside a table cell?
I have a dataset with weekly salary of multiple employees of same grade from different dpt. We are not going to show the report based on employ. The report will be showing data based on Employee grade and their department.
Grade Dpt wk1 wk2 wk3 wk4
manager hr 3000 2500 1000 2000
senior hr 1300 1500 1300 1600
manager hr 2500 2300 2100 3000
We need to show the result by grouping grade and dpt. So the Wk1 rate will be the sum of (3000+2500).
Grade Dpt wk1 wk2 wk3 wk4 Total
manager hr 5500 4800 3100 5000 18400 (how to find???)
senior hr 1300 1500 1300 1600 5700(??)
Total 6800 6300 4400 6600 24100(??)
How to find the total for each row on the right most end ?
I want to create subscription for a report.
While creating it gives error "Operation is not valid due to the current state of the object".
I am able to create subscription for other reports deployed. But it gives error for subscription of a particular report.
Tried deploying the report with other name then too it does not allow me to create subscription.
I'm working on a report to show financial transactions from a table over a certain period. For most transactions there is a PDF document that is stored in a separate table in a binairy format. In my report I would like to include a link on every line with transaction information in the report that opens the PDF that is linked to that transaction. Just to be clear, I don't want to embed the PDF in the report but I want the users of the report to have the option to view the PDF that is related to that transaction in their standard pdf reader (adobe).
Code to do the following:
Once a user clicks on the link to view the PDF I need the code to get the binairy data of the PDF file from the table, convert it back to a PDF and open it in the default pdf reader (for example adobe reader). If it can't directly open the file then it's maybe possible to activate the 'open or download' pop up that you also get when you download something from a website.
I have a On_hand_Quantity report which has a parameter drop down to select about 200 stores.
When i run this report in BI studio , selecting all the 200 stores for the parameter it works fine.
But when i upload the same report to report manager and try selecting all the store_numbers it errors out saying 'operation cannot run due to current state of the object ' This report was running fine since the past 2 years, on 30th dec we did some .NET updates (KB2656356 and KB2656351) after which this report stopped working.
I tried troubleshooting all ways but it errors out only in report manager.
Is there any way to get the report toolbar using SOAP Api in SSRS reporting.
View 6 Replies View RelatedI have done the following and a domain user would not access report created a login to the SQL server to the user (this SQL Server is where data source DB is)went to site setting in Report Manager and made this use a system userright clicked on report folder and made this user in the browser roleeven checked that in the report in question, the user is already in the browser role Still the user would not access the report! "User .......... does not have required permission" is the error message I am getting.
View 6 Replies View RelatedI have written a report visual studio. The report has 10 multi-value parameters that pull data from their individual data sets within the reports. When running the report from within Visual Studio it renders fine. There are no errors reported, only a warning related to a pathname I have use to retrieve image data and display on the report.Deployment of the report is error free.When I view the report I briefly get the "Loading" splash window, but then nothing. None of the headers or static text is displayed. The results window is blank.
The report defaults all the parameter values. In trying to debug the issue I have found by reducing the number of parameter values the report will render. Once I have all the values added, the report does nothing.Below is the query being used for the report. The where clause in the query shows the parameters being used and the syntax.We are running on Windows Server 2008 R2 and SQL Server 2008 R2.
Ralph
SELECT RTRIM(a.ITEMNMBR) AS Style, RTRIM(a.ITEMDESC) AS Description, a.ITMSHNAM AS UPC, c.LOCNCODE AS Store, d.LISTPRCE AS ListPrice, a.CURRCOST AS Cost,
a.USCATVLS_1 AS [Main Category], a.USCATVLS_2 AS Market, a.USCATVLS_3 AS [Alternate Retail], a.USCATVLS_4 AS Country, b.ITEMXTRAS_1_Type AS Type,
b.ITEMXTRAS_2_Finish AS Finish, b.ITEMXTRAS_3_SubCategory AS SubCategory, b.ITEMXTRAS_4_Department AS Department,
[code]...
I have a ssrs report having 2 tables in with 4 columns in each. When I go to export option in preview I can see all data coming in one excel sheet, But I am trying to get 2 tables in 2 different pages in Excel when I export.First page of excel comes with first table data with 4 columns and second page of excel comes with second table data with 4 columns .
View 2 Replies View RelatedI'm wondering how to print a SSRS report without bringing up a report viewer. Is there way to print(PDF format) the SSRS report in the web application( .net ) directly from the "print" button without bringing up a report viewer?
View 2 Replies View RelatedI am trying to develop a report from cube,and it has one drill through report.when i click on sales amount field on main report,then it open the drill through report with details.Here i passed the **(category,subcat,product)parameters(Cascaded)** to drill through report in action part of main report.In my main report i have two columns .
columns are **Level** and **Salesamount**.
Values are like
**[-]category** **100**
**[-]subcat** **50**
**product** **30**
when i click on 100, parameters are passed & it open the detail report correctly, but when i click on 50,the values for subcat parameter is not getting values in detail report and same as the product also.
Here i used the expressions in parameter values
**pCategory**----iif(inscope(category),!fields.category.value,split(join(Parameters!category.value,","),","))
**psubcat**----iif(inscope(subcat),!fields.subcat.value,split(join(Parameters!subcat.value,","),","))
**pproduct**----iif(inscope(product),!fields.product.value,split(join(Parameters!product.value,","),","))
How do I get data on my linked report based on my grouped subtotal and grand total from the main report. The subtotal and grand total are calculated columns.
I have a 3 columns in my matrix in the SSRS summary report. Actn_COAST, ActnCITY and NumbOfAccts.
The following is code for my summary report. The results are shown below.
SELECT Distinct ActnCITY, Count(ACCT) as NumbOfAccts,
CASE WHEN ActnCITY in ('NY', 'OH', IN, 'NJ', 'SC', 'NC') THEN 'EAST COAST'
WHEN ActnCITY IN ('CA'. 'NV', 'UT', 'WA', 'OR') THEN 'WEST COAST'
ELSE 'OTHER'
END AS Actn_COAST
FROM tbl1
where ACTNDATE between @STARTDT and @EndDT
Code for my detail report contains the following SQL
SELECT * FROM tbl1 where ACTNDATE between @STARTDT and @EndDT AND @ActnCITY = ActnCITY
I have linked my report based on the NumbOfAccts column. I am able to get data if I click any of the NumbOfAccts values related to the state I want. However when I am not sure how to make the subtotal and grand total work. I want when I click on the subtotal of either coast, I should be able to see records of that coast e.g., if I select 37 I should be able to see all the records in East Coast. If I click on the Grand Total, I only want data related to those 2 coasts.
Is there a way to subscribe SSRS report using dynamic parameters for email and trigger the report from autosys job so that report should generate the exact time the job is triggered.Let me describe, my SSRS report should be triggered on success of one autosys job. i need to send email parameter and time of report schedule from this autosys job.
View 3 Replies View RelatedHi,
I'm having problems navigating from one report to another one if the second report has a multi-valued report parameter. When I navigate to the second report, I don't pass any parameters, but I get an error "parameter is missing a value" for the multi-valued report parameter. I have it setup as allow "multi-value" and "blank value". Any idea what the issue might be?
Thanks.
How to display the logo in middle of report header , The logo is embedded in the Image folder . The column of the report are static. we are using SSRS 2008
View 6 Replies View RelatedI have a report which works fine with visual studio but when i uploaded the same into report server and tries to access it through IE or chrome or anything its dam slow.
how to get rid of this issue?
I need to create a SSRS report using the Warehouse tfs_warehouse DB Report need to be drill down on WorkItemType Parents and child values. So, If we click on Product Back Log Item will get all the tasks inside it and so on....
------->Product BackLog items
----------> Bugs Or Tasks
-----------> Tasks
I have done research and found out how to do it in OLAP cube ..but still can't figure out the TSQL query to be used.Found one of the query on forum:
SELECT * FROM DimWorkItem DWI
INNER JOIN FactWorkItemLinkHistory FWILH ON DWI.System_Id = FWILH.TargetWorkItemID
WHERE FWILH.WorkItemLinkTypeSK IN (SELECT DWILT.WorkItemLinkTypeSK FROM DimWorkItemLinkType DWILT WHERE DWILT.LinkName = N'Child')
AND DWI.System_WorkItemType = N'Task'
AND DWI.System_Rev = (SELECT MAX(DWI1.System_Rev) FROM DimWorkItem DWI1 WHERE DWI1.System_Id = DWI.System_Id)
AND FWILH.SourceWorkItemID IN (SELECT DWI2.System_Id FROM DimWorkItem DWI2 WHERE DWI2.System_WorkItemType = N'Bug');
We are trying to use reporting services to execute a url when the SSRS report is executed. For example when I execute a SSRS report I would like the report to automatically access [URL] (as an example). The reason we are doing this is we want to access another reporting application but record the number and times of access via the reporting services execution tables/views. Is this achievable by putting some code in the Report properties. Can you open - execute url and then close report via some code.
View 3 Replies View RelatedI have below query which is working fine in SQL but if i use same query in SSRS dataset then it is not working at all.If i put only one condition in where clause then it works but if i put multiple conditions then it does not works in SSRS and through error "data is not available".
SELECT id,
DATEDIFF(DAY, Created, BMTRequestReviewDate) AS 'EvaluateDays',
all code goes here
FROM [dbo].[SBWT_Data]
WHERE
upper(Status) not like '%XX%'
AND upper(Status) not like '%DELETED%'
upper(Status) not like '%CLOSED%'
---OR
WHERE Status NOT IN ('90 - Closed','XX - Rejected','XX - Request Rejected','XX - Deleted')
As you can see in code i have tried with both where conditions but it is not working. It seems that SSRS does not supports multiple conditions for same field.
I am having report like below
Manager Name ClientName Procedure count
Paul Infi P1 3
P2 3
P3 3
Hun wallmaart P1 1
report group on ManagerName.
How to get the count column.
how can i create a report like this format in SSRS ? In this format grouping will be applied on Phase code and tablix/matrix will be repeated the same way like shown above.The headers must repeat on the next pages too.Web Developer / Web Designer / Software Developer / UI Designer
View 5 Replies View RelatedI am trying to get my ssrs report in an excel. I want the report to be displayed in a single excel sheet, however, I am getting multiple sheets. I have even tried the page break functionality and used the
expression(=IIF(Globals!RenderFormat.Name="EXCEL",TRUE,FALSE) in the tablix properties--> pagebreak--->disabled option.
The same is not working. what am i missing here?
No I have a map of China to show the sales of each province in SSRS (SQL Server 2008 R2)
I want to add logo of my company and some remarks about the data on map.
I have tried to add logo as an image then drag it on the map, but when it showed up the logo just outside the map.
SSRS report exporting to pdf generates this error
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rrRenderingError</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message
xmlns="http://www.microsoft.com/sql/reportingservices">An error occurred during rendering of the report.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rrRenderingError&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.5343.0</HelpLink><ProductName
[code]...
I have a requirement associated with SSRS bar chart.
Data in my DB is like shown below:
A
B
C
Opt1
Data1
10
Data2
20
Opt2
Data1
30
Data2
40
Opt3
Data3
50
Now I would like to build up a bat chart which should have:
Legends: Opt1, Opt2, and Opt3
Categories:
Data1(showing bars with scores as 10 and 30),
Data2 (showing bars with score 20 and 40),
Data3 (showing bar with scores 50 only)
I have a Report In that report I need to break out company code and export this report on excel and each company code shown its own tab in excel .I just add image about report details.I tried this issue but i cant get the exact names on excel sheet.
View 3 Replies View RelatedI have created a report that sharing two datasets for displaying the data. This datasets are using Stored procedure for execution of the report.One of the stored procedure using Order by clause and returning the data.But on running the report , the report viewer displays the unsorted data of the filed. But if we run the stored procedure directly from the sql server , it will return the sorted data.
View 8 Replies View RelatedI have a report which shows around 8 columns. The report is in landscape mode(Width -11in and Height-8.5 in). I want to display only header in the first page means basically I want to add a cover page.
I have used tablix to display data. To display an empty page, I have added a rectangle before tablix and made add a page break after true. But while exporting to pdf, I am getting 2 blank pages with header. But I need only one.
Seems simple. People working in departments with different types of hours (regular, overtime, vacation... thus the grid which pivots hours in rows to the appropriate columns). I want to subtotal by department, but whenever I try to add totals after to that group, I just get a grand total. No subtotals. Why?
View 8 Replies View Related