I want to create subscription for a report.
While creating it gives error "Operation is not valid due to the current state of the object".
I am able to create subscription for other reports deployed. But it gives error for subscription of a particular report.
Tried deploying the report with other name then too it does not allow me to create subscription.
Hello,
We are getting this error when a user clients any report. they can see the directories OK, but when we upload a new report the error still happens.
Error is "Operation is not valid due to the current state of the object."
Any ideas?
Thanks
Michael
Good morning,
I have created a very simple report that works correctly when in Report Designer Preview mode. When I deploy to the report server it reports that deployment was successful. When I log into Report Manager the report is visible, but when I click on it I end up at an error page.
The error that I get is:
Operation is not valid due to the current state of the object.
Appreciate any help on this.
Thanks
Stuart
I have a On_hand_Quantity report which has a parameter drop down to select about 200 stores.
When i run this report in BI studio , selecting all the 200 stores for the parameter it works fine.
But when i upload the same report to report manager and try selecting all the store_numbers it errors out saying 'operation cannot run due to current state of the object ' This report was running fine since the past 2 years, on 30th dec we did some .NET updates (KB2656356 and KB2656351) after which this report stopped working.
I tried troubleshooting all ways but it errors out only in report manager.
I received this error when I tried to change the Authentication mode from windows to windows and sql server. a window popped for sa password and i put my password and the error pops. im using sql server 2005.can help?
View 3 Replies View RelatedI want to bookMark from one table to another in current report. Below are the 2 tables , when I select a
FromBrandName in the first table, it should take me to the second table row with the same
FromBrandName. Is this possible? Is there a function to access a specific running value other than First and Last?
How to show the CurrentMonthanddateandyear in my report header in ssrs?
1.How to show the currentdateandMonthyear exmple date format like June 29 2015 on my report header.
2.How to change the report rdl name with the same name like EmpUpdatedreportJune 29 2015.rdl ,it is possible to create and change the rdl file name with the current dateandmonth.
I'm using SQL Server 2012 Analysis services in Tabular mode and connected to Oracle Database and while importing, I'm getting below error after importing some rows.
OLE DB or ODBC error: Accessor is not a parameter accessor.. The current operation was cancelled because another operation in the transaction failed.
Hello -
For the life of me I cannot figure out why i'm getting the "Object Refence Not Set To an Instance of An Object" error after I try and create a Report Services project in Business Intelligence Studio. I've followed all of the steps in similar posts such as checking the ReportServer/web.config file but everything checks out.
Does anyone have any other ideas as to how I can get rid of this annoying error and start creating some reports?
Thanks!!!
When publish report define file (SSRS2008 ) to SSRS2008 server , it throws that the report definition is not valid. But I use VS2008 deploy it and it is succeeded to publish to SSRS2008 Server. Why ?
<errorinfo>Details: '.', hexadecimal value 0x00, is an invalid character.</errrorinfo><code> Reporting Service 2005 m_ReportingService = new ReportingService2005();this.m_ReportingService.CreateReport(reportName, parentFolder, overwrite, report, null)</code>
I am getting this error when upgraded to SQL Server 2012. Earlier the same report(.rdl) just working fine on SQL Server 2008 R2.
Message = System.Web.Services.Protocols.SoapException: The value of parameter 'param' is not valid. ---> Microsoft.ReportingServices. Diagnostics. Utilities.InvalidParameterException: The value of parameter 'param' is not valid. ---> System.UriFormatException: Invalid URI: The Uri string is too long.
Is there anything changed in SQL Server 2012 regarding this.
I'm using ReportingServices 2008 and I've this message "The operation has timed out" when rendering a report with some parameters. I've set in the execution properties of this report : Do not apply the expiration time for the execution of the report.When I look the ExecutionLogStorage table from Report Server DataBase I see that I've no message for this report when timeRendering is 21109ms. When I change the report parameters to obtain more data, the timeRendering is 76866ms and I've the message "The operation has timed out".
View 9 Replies View RelatedI have a table with one of the column(EmpHiredate) datatype is char(10). It has value like "20141023". I need to display this value as date format(dd/mm/yyyy) in report. Following methods i tried in textbox expression but no luck.
=Format(Fields!EmpHireDate.Value,"dd/MM/yyyy")
=Cdate(Fields!EmpHireDate.Value)
Error:[rsRuntimeErrorInExpression] The Value expression for the textrun ‘EmpHireDate.Paragraphs[0].TextRuns[0]’ contains an error: Conversion from string "20041023 " to type 'Date' is not valid.
Is it possible to convert string to date using SSRS textbox expression ?
When i try to restore the encrypt key to reporting service getting the below error.The version of the report server database is either in a format that is not valid, or it cannot be read. The found version is '147'. The expected version is 'C.0.9.45'I found the table in Database called DBUpgrdaeHistory
UpgradeID DBVersion
Datetime
31 147
[code]...
I'm trying to sum a column in a report. in Most columns I can just wrap the row level expression with "Sum()" and it works. However, I have run into a few that give the following error. The Value expression for the text box ‘Textbox241’ specifies a scope that is not valid for a nested aggregate. The scope must be the same name of the scope specified by the outer aggregate or the name of a group or data region that is contained in the scope specified by the outer aggregate.Here is my row level expression that works.
=Code.Divide(sum(Fields!WeeklyUnits.Value),sum(Fields!EstUnits.Value))
*
(Code.Divide(sum(Fields!EstHours.Value),sum(Fields!EstHours.Value,"Job")))
Here is my attempt to Sum the row level for the footer area.
=Sum(Code.Divide(sum(Fields!WeeklyUnits.Value),sum(Fields!EstUnits.Value))
*
(Code.Divide(sum(Fields!EstHours.Value),sum(Fields!EstHours.Value,"Job"))))
I am trying to create a column chart that calculates the percentage of computers in our IT environment that are Actively communicating to our SCCM Server.
I have two datasets:
1. Total_Count_Of_AD_PC DataSet.
2. PC_With_Active_SCCM_Clients dataset.
Basically i wan to calculate the percentage for each Region (i.e. AP for Asia Pacific, EMEA, Americas).
Below is the Total_Count_Of_AD_PC Dataset screenshot.
Below is the PC_With_Active_SCCM_Clients dataset.
Below is the expression that i used that is causing the error.
=CountDistinct(IIf(Fields!Region.Value="AP", "PC_With_Active_SCCM_Clients"),(Fields!Name.Value, "PC_With_Active_SCCM_Clients"),Nothing)/CountDistinct(IIf(Fields!Region.Value="AP", "Total_Count_Of_AD_PC"),(Fields!name.Value,
"Total_Count_Of_AD_PC"),Nothing)
Below is the error message....
The Y expression for the chart ‘Chart2’ has a scope parameter that is not valid for an aggregate function. The scope parameter must be set to a string constant that is equal to either the name of a containing group, the name of a containing data region, or the name of a dataset.
Currently we are using Custom Delivery Extension for SSRS 2008R2 We are planning to move it SSRS2012
My Question is: Whether we can use the same Code used for SSRS2008R2 to SSRS2012?
if not what code changes we should do?
Is there any way to get the report toolbar using SOAP Api in SSRS reporting.
View 6 Replies View RelatedNeed to display current time in below format:
06/01/2015 at 7:00 a PST
(Date at time TimeZone)
We've got a requirement to build the real time report. user can browse report at any point of time and need to see the latest data(stock market) in the report.
I've few options down...
1. Directly point to OLTP database as source and write stored procedure to show result set.
2. Replicate the database and write the SP's to reports. To avoid pointing directly to OLTP db.
3. To build the datawarehouse with dim & facts to show it in reports. I prefer this as a standard method, but this would have some latency depending on trasaction load which will differ from the requirement.
We built our prod server [vm] with SQL Server 2008 R2 on Server 2008 R2. It works nicely. Then we made a copy of the VM and renamed it (so our test environment would be IDENTICAL to production). After that, SSRS was broken: I get "HTTP Error 503. The service is unavailable." I can't connect via http, or SSMS.
We have tried:
* Running SSRS config tool (several times)
* Running with/without the IIS Server Role
* Dropping & recreating the SSRS keys
* Recreating the ReportServer database, etc
* Checking all of the accounts, permissions, etc
* Running SQL Repair
* Going through the registry to fix any references to the machine's old name
* Uninstalling, reinstalling SSRS
* Completely uninstalling ALL of the parts of SQL Server 2008 R2, deleting all directories, removing references to SQL Server from the registry, rebooting, reinstalling everything.
None of this has worked. SSRS [R2] is still 503 on our test box.
the SSRS [NT] service seems to run, without error. The Event Viewer doesn't seem to be recording any errors. The SSRS logs say that the default URL is wrong, but we get the same error in Prod, and Prod works fine. The other SQL Logs say something about not being able to contact the service. However, as I said, the [NT] service seems to be working fine.
Hi all, i searched everywhere but couldn't find any info on the following error that i'm currently receiving:
"The conversation endpoint is not in a valid state for SEND. The current endpoint state is 'DI'."
I understand that this is due to some problem in my send/receive protocol but how do i fix this problem so that i can continue with my testing? Right now i'm forced to drop my entire test database and reinstall everytime this message shows up because i can't send/receive any messages at that point. Is there anyway to get rid of it?
Thanks in advance. This is driving me nuts.
I am trying to use one dataset rather than two and was hoping to then filter the data via a table or matrix.
This is my dataset
SELECT
Practice.ibvStaffCategorisation.StaffId
,SUM(Practice.ibvStaffTotalsCL2Y.ChargeableMinutes) AS Sum_ChargeableMinutes
,SUM(Practice.ibvStaffTotalsCL2Y.NonChargeableMinutes) AS Sum_NonChargeableMinutes
,SUM(Practice.ibvStaffTotalsCL2Y.ChargeableAmount) AS Sum_ChargeableAmount
,SUM(Practice.ibvStaffTotalsCL2Y.NonChargeableAmount) AS Sum_NonChargeableAmount
,Practice.ibvStaffTotalsCL2Y.Period
[code]....
I would like to display two rows of data for each StaffId one representing the current period and the other all periods to date so the table would look something like below.
StaffId | Non Chargeable Time | Chargeable Time
CJJ | 0:20 | 4:20
| 4:50 | 19:20
JN | 0:05 | 5:30
| 1:30 | 25:30
The above shows two separate StaffId figures the first line for each shows non chargeable and chargeable for the current period and the second line a total of all periods in that year.
I have managed to get the first row to display only figures from the current period by using a filter however it also applies the same filter to the second row in the group. I have also tried to group the rows but am drawing a blank.
Hi
I am new to SQL server and I have been trying hard to make a client computer to remote connect to a SQL express database on host computer
I have a VB6 application that can connect to SQL server database LOCALLY without problem:
Connection String is:
my_connection.ConnectionString = "Provider=SQLOLEDB.1;Integrated Security=SSPI;Persist Security Info=False;Initial Catalog=MyMushroom;Data Source=LAPTOPSQLEXPRESS"
I have followed instruction on enabling remote connection function from this blog:
http://blogs.msdn.com/sqlexpress/archive/2005/05/05/415084.aspx
I then try to run the same app from the client computer, it gives me:
Login failed for user 'LAPTOPGuest'.
After looking up the web for solution, I found that I can test the connection from the HOST computer in this way:
C:Documents and Settingskit>sqlcmd -E -S laptopsqlexpress
1>
2>
The test is successful
Now I run the same command on the CLIENT computer
C:Documents and SettingsKit>sqlcmd -E -S laptopsqlexpress
Msg 18456, Level 14, State 1, Server LAPTOPSQLEXPRESS, Line 1
Login failed for user 'LAPTOPGuest'.
Now I can sure that from the client computer it cannot make a connection to it, then I look at the errorLog from my host computer
2006-08-13 21:41:00.34 Logon Error: 18456, Severity: 14, State: 11.
2006-08-13 21:41:00.34 Logon Login failed for user 'LAPTOPGuest'. [CLIENT: 192.168.0.5]
2006-08-13 21:45:10.64 Logon Error: 18456, Severity: 14, State: 11.
2006-08-13 21:45:10.64 Logon Login failed for user 'LAPTOPGuest'. [CLIENT: 192.168.0.5]
2006-08-13 21:48:41.80 Logon Error: 18456, Severity: 14, State: 11.
2006-08-13 21:48:41.80 Logon Login failed for user 'LAPTOPGuest'. [CLIENT: 192.168.0.5]
Now I know it is actually Error: 18456, Severity: 14, State: 11.
From this site : http://blogs.msdn.com/sql_protocols/archive/2006/02/21/536201.aspx
11 and 12
Valid login but server access failure
It tells the connection string and SQL Express seem to be set up properly but the server access failed the remote connection
I have previously had SQL Server 2000 installed. I uninstalled SQL 2000 before I install SQL express but somehow the SQL Server Service Manager is still running at startup, and C:Program FilesMicrosoft SQL Server80 and its files are still exist after uninstallation..... Could this be a problem?
The Knowledge base suggestion on "enabling remote connection" is very simple and I do not understand why it is so difficult to me just to make a remote connection test work..... please, I need your help.
Recently, one of my clients began receiving this error. My team gave them sysadmin permissions, but this is terrible practice. I have read into disablying simple file sharing, but I don't even think I have the option to do it. I look in mycomputer > tools > view and don't see any option for this. Besides, the problem just started occuring recently, within the last week. The server is a cluster with veritas clustering and the edition is sql server 2000. Has anybody ever had a problem like this and have a good fix?
Thanks for any help in advance...
-Kyle
I am using SSRS in sharepoint Mode
In order to enable the report cache and set data refresh options, in sharepoint library on report file,I am selecting "Manage processing options" as mentioned in MSDN
[URL] ....
But I am getting error "EXECUTE permission was denied on the object xp_sqlagent_enum_jobs" I have granted the execution rights for all procedures as mentioned here but still error isnot going
[URL] .....
Where can I find SSRS failure logs, I can see execution3 but it is not storing this information...
Reporting Services on my production server stopped working. If I try to open it from Management studio, I get the error below.
Already tried installing patch 07-040, re-registering asp.net, and a few other stuff. Can you guys help me?
TITLE: Connect to Server
------------------------------
Cannot connect to GRUMIUM.
------------------------------
ADDITIONAL INFORMATION:
Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'.
The request failed with the error message:
--
<html>
<head>
<title>
SQL Server Reporting Services
</title><meta name="Generator" content="Microsoft SQL Server Reporting Services 9.00.2047.00" />
<meta name="HTTP Status" content="500" />
<meta name="ProductLocaleID" content="9" />
<meta name="CountryLocaleID" content="1033" />
<meta name="StackTrace" content />
<style>
BODY {FONT-FAMILY:Verdana; FONT-WEIGHT:normal; FONT-SIZE: 8pt; COLOR:black}
H1 {FONT-FAMILY:Verdana; FONT-WEIGHT:700; FONT-SIZE:15pt}
LI {FONT-FAMILY:Verdana; FONT-WEIGHT:normal; FONT-SIZE:8pt; DISPLAY:inline}
.ProductInfo {FONT-FAMILY:Verdana; FONT-WEIGHT:bold; FONT-SIZE: 8pt; COLOR:gray}
A:link {FONT-SIZE: 8pt; FONT-FAMILY:Verdana; COLOR3366CC; TEXT-DECORATION:none}
A:hover {FONT-SIZE: 8pt; FONT-FAMILY:Verdana; COLORFF3300; TEXT-DECORATION:underline}
A:visited {FONT-SIZE: 8pt; FONT-FAMILY:Verdana; COLOR3366CC; TEXT-DECORATION:none}
A:visited:hover {FONT-SIZE: 8pt; FONT-FAMILY:Verdana; colorFF3300; TEXT-DECORATION:underline}
</style>
</head><body bgcolor="white">
<h1>
Reporting Services Error<hr width="100%" size="1" color="silver" />
</h1><ul>
<li>An internal error occurred on the report server. See the error log for more details. (rsInternalError) <a href="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsInternalError&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=9.00.2047.00" target="_blank">Get Online Help</a></li><ul>
<li>Object reference not set to an instance of an object.</li>
</ul>
</ul><hr width="100%" size="1" color="silver" /><span class="ProductInfo">SQL Server Reporting Services</span>
</body>
</html>
--. (Microsoft.SqlServer.Management.UI.RSClient)
------------------------------
BUTTONS:
OK
------------------------------
Hey everyone...I'm completely new to SQL Server and I'm trying to learn the Reporting Services tool. I just installed SQL Server 2005 and selected to install all the options, atleast I'm 99.99% sure I did.
When I go to launch Report Services Configuration, I get "No report servers were found on the specified machine. Details: Invalid namespace". Do I need IIS for this to work?
Also, I do not think the AdventureWorks database was installed, I cannot seem to find it anywhere. I have tried to go back through and reinstall it, but it says that it is already installed.
Also, is there a certain order that you are supposed to install things? i.e. SQL Server before Visual Studios?
Thanks in advance.
*Edit* BTW, I'm using Windows XP, SQL Server Enterprise Edition, and VS.NET 2005.
Is it possible to have my pop up SSRS box size according to the size of the returned value? Issue is, i have a text box that returns a note field and depending on the number of notes, it can and will vary in size. I am currently using this code
="javascript:void window.open(" &"'"& Globals!ReportServerUrl &"/Pages/ReportViewer.aspx?"
&Globals!ReportFolder &"/Patient%20Eligibility&rc:Parameters=False&rc:Toolbar=False
&VPATIENTPROFILEID="& Fields!PatientProfileID.Value
&"
','DetailsWindow','left=300,top=180,width=920,height=455,status=no,menubar=no,scrollbars=yes,location=no'" &
")"
I have a requirement to convert reports from Crystal Reports to SQLServer Reports. Is there any tool to do this? or Do I need to redesignevery report in SQL Server Reports?Madhivanan
View 2 Replies View RelatedI am using VS 2010 and the SSRS that came with it. I am sure its SSRS 2008. Anyway, I added a report file to the project, added an ObjectDataSource and connected this to SQLServer 2008, and display the dataset on the report. The report is using ScriptManager, ReportViewer1, and Report1.rdlc file. I preview the dataset and I have multiple row returned. The problem is I only have one row displayed on the report. Maybe I did a quick and dirty report? What setting of properties did I missed?
View 8 Replies View RelatedI have to convert 'While Do' loop logic in Crystal to SSRS. How to use loops in SSRS.
View 12 Replies View RelatedWe are trying to use reporting services to execute a url when the SSRS report is executed. For example when I execute a SSRS report I would like the report to automatically access [URL] (as an example). The reason we are doing this is we want to access another reporting application but record the number and times of access via the reporting services execution tables/views. Is this achievable by putting some code in the Report properties. Can you open - execute url and then close report via some code.
View 3 Replies View Related