I have designed a report in which there are 6-7 charts. I want to print each chart in a new page. For this I have inserted page break after each chart. After this the report is populating fine but when I am exporting the report in pdf the page break are not working.
View 4 RepliesI have a Report In that report I need to break out company code and export this report on excel and each company code shown its own tab in excel .I just add image about report details.I tried this issue but i cant get the exact names on excel sheet.
View 3 Replies View RelatedExample: A sales report that details and summarizes each Salesperson’s total sales within a company’s stores that reside in each state.
The report has 3 levels of groupings where the highest 2 levels require summary counts on a separate page and the lowest level produces a summary count in the midst of the detail lines of the report.
The data consumed by the report is ordered by State, Store ID, and Salesperson.
The header of each page lists the State and Store ID. The detail lines of the report list items sold and the associated sales amount for each item sold by each store’s salesperson.
At the end of each Salesperson’s items sold, a summary line is listed on the next line in the report showing the total amount and total count of items sold by that Salesperson.
The very next line on the report lists items sold and the associated sales amount for the next Salesperson within that particular store.
Summary lines will be produced for each Salesperson within each particular store on the next line of detail in the report.
At the end of all sales data for each store, a summary page is produced on a separate page listing the summary of each Salesperson’s totals.
Each line of the summary page contains the same counts for each Salesperson that was embedded in the detail section of the report.
The summary page also contains a grand total line listing the total count and sales for all salesmen within each given store.
At the end of all sales data for each state a summary page is produced on a separate page listing the summary of each store’s totals.
Each line of the summary page contains the grand totals of all sales for each store within a given state.
The summary page also contains a grand total line listing the total count and sales for all stores within each given state.
The simple breakdown is the groupings and totals for each state and store must be listed on a separate page in the report.
The grouping and totals for each Salesperson must be listed on the next line within the detail section of the report.
Current issue: The requirement is for no page break at the end of each salesperson’s sales data because the page breaks produce too many extra pages in the report.
Disabling the page break at the Salesperson level produces format issues such as page headers printing on the next line in the report before each Salesperson’s summary line.
Disabling the page breaks at this level also produces the problem of suppressing the page break for the summary page that comes at the end of each store.
Question:The report has 3 levels of grouping with Salesperson at the lowest level, Store ID being the parent group of Salesperson, and State being the parent group of Store ID. Is it possible to format the Salesperson summary line (lowest level grouping) as just another detail line in the report without impacting the report format that requires page breaks at the parent group levels?
A sample report layout of what we are trying to achieve is on the next page.
Sales Report
State: Alaska
Store ID: 100
Item Sold
Sales Amount
Hammer
$10.00
Saw
$15.00
[Code] .....
We are facing problem in doing page break with column grouping. Our column group contains years e.g 2011, 2013 . We want to show a complete page for a year.
Suppose 2011 has 10 records(horizontal) and 2013 has 12 records(horizontal) in column. The output should be 10 records of 2011 in first page, 12 records of 2013 in second page.
We cannot change the report layout to make column to row and vice versa.
In SSRS reports i have multiple charts and tables. per page i have to display one chart and one table. How to put page break after the chart and table. I have not used rectangle. I created all the charts and tables in the body area.
View 5 Replies View RelatedI have a detailed report in ssrs in which data can come from start date and end date parameters.but the problem is. for example i gave startdate as 01/01/2015 and end date as 09/31/2015 then the data must be in displayed in such a way that jan month in one tab and feb month data in one tab and so on to sep month data in new tab when i export to Excel.
View 3 Replies View RelatedI have a SSRS report with data in below format.
ID Name Date
1 A null
2 B 01/01/2012
3 C 01/02/2013
Also, I have a sort parameter @sort and values are (Name, ID, Date)
I want to apply page break whenever @sort=Name. There should be no page break when user selects @sort = ID or Date. Page break should happen only when @sort value = Name
it should be like this...
Page 1:
ID Name Date
1 A null
Page 2:
ID Name Date
2 B 01/01/2012
Page 3:
ID Name Date
3 C 01/02/2013
I need achieving the above task.
I have the multiple pages with in the report. For Example,
1. Dashboard Page
2. Risk Summary Page
3. Issues Summary Page
4. Key Summary Page
I am using the rectangle for the physical page break and set the page break option as "Add a page break after" for each rectangle except for the last key summary page in the RDL
Other Report details
Report Paper Size is A4, Landscape, Width = 29.7cm, Height = 21cm
Report Margins - Left=0.2cm, Right=0.2cm, Top=0.25cm, Bottom=0.25cm
Rectangle size in the report body in each page as
Width=28.7cm, Height=17.5cm,
Header Height= 2cm
Footer Height = 1cm
Now, the issue is when I add the Tablix with the rectangle to display the details data, it also adds the blank page after the page and when I remove the Tablix and only keep the graphs within the rectangle then blank page issue get fixed.
I developed one dynamic column (matrix) report. while export to excel it 's show same output as SSRS have. but while exporting CSV pivot column not coming as same as Excel and SSRS screen. data is moving to rows.
Please see below screen shot ....
I have a report with multiple tables. I need to show each tables in different pages. When there is no data for tables/tables , it is coming with the next table which has data. I have given "Add a page break after" option in the tablix but still the tables are coming together when no data available. How can I show it in different page?
View 2 Replies View RelatedHow do I add a hard page break in the middle of a two page report? I use Microsoft reports for windows.
View 5 Replies View RelatedI want to page break after after 6 grno recored.I used ceiling(rowNumber(Nothing/6)) but it worked differ(this fun used on top most group )below I attached screeshot. I need to page break after 6 grno record but above syntax measure 6 datafiled row and then page break.how I can page break after 6 grno record
View 3 Replies View RelatedI have a Sales report with 3 lists each being nested inside of the other and they also each contain a Matrix. Top list is for Region, followed by District and then State. I have page breaks setup so that each region appears on it's own page, followed by each District summary appearing at the top of the page with a breakdown on that page for that Districts states. In total the report exported to PDF or printed runs around 19 pages. This report when exported to PDF or printed works fine.
When I export it to excel I get a full document map on the first worksheet. I then get 10 worksheets of information breaking off the last 9. The document map links reflect the absence of this data by not actually being links from that point on. If I remove page breaks so that the number of pages created are less than 10 excel worksheets the export works fine and my document map links are created.
So does the export to Excel have a limitation on the number of Worksheets that can be created? In my case it appears to happen at 10 each time. Oh and by the way I've attempted this in VS.2003 and 2005 and SQL Reporting Services 2000 and 2005 for the same reports.
Thanks for your assistance.
I have an existing report that has a table that contains two groups. The 1st group has the option to "page break at start". The 2nd group isn't set to page break. The report works correctly if the 2nd group's data fits on to a single page per data group. However, if the 2nd group's data for one of the iterations crosses page boundaries, it causes issues with the beginning of the report. The report breaks the 1st groups rows into separate pages, and combines the previous row with the next row on the next page, until the 2nd group is encountered, and then another page break.
Example (Assuming 3 rows in the 1st group)
1st group - 1st Row
<page break>
1st group - 1st Row
1st group - 2nd Row
<page break>
1st group - 1st Row
1st group - 2nd Row
1st group - 3rd Row
<page break>
1st group - 1st Row
1st group - 2nd Row
1st group - 3rd Row
2nd group - 1st row
<page break>
1st group - 1st Row
1st group - 2nd Row
1st group - 3rd Row
2nd group all remaining rows now appear.
This report works fine on SQL 2000 SP2, and SQL 2005 SP1. In my test environment, I was able to verify that the report worked on the previous SSRS versions, and then broke immediately following the installation of SQL 2005 SP2. I have tried many things from changing the paging, grouping, table structure, and starting from scratch. Maybe I have missed something. If anyone has any ideas or suggestions, I would appreciate the help.
I have a dataset with 2 fields : code and value. I have a parameter that will give me the data to insert into the table I want to make. The number of rows is not fixed, so I couldn't create, for example, a table with a fixed number of rows.
I want to create some kind of table that will allow me to have cells that look like this : "code" : "value" and have 3 of them (like 3 columns) before I switch to the next line (row).
Just to make it clear, I'm not using any SQL requests here, data comes from XML.
It should look like this :
code1 : value1 code2 : value2 code3 : value3
code4 : value4 code5 : value5 code6 : value6
code7 : value7
and it'll go like this until I've used all the data.
i have used rdlc report. how can i set the page break in report
View 6 Replies View Related
Hi -- I have a different problem than most people with a Reporting Services 2000 report rendering to Excel 2003.
My report has 5 different subreports. I want them to appear in Excel as 5 separate tabs. When rendered through the browser (using Report Manager), the page breaks are correct -- there are 5 pages.
When exported to Excel, the first report is on a separate tab, and the other 4 are jammed together on one tab.
Each report consists of between 1 and 4 tables. The last table on each report has the "page break after this table" checked.
The same report deployed to SSRS 2005 page breaks the way I expect in Excel. In SSRS 2000, it doesn't.
Any ideas? Report/body page widths/heights?
Cheers,
David
I developed a main report containing numerous subreports. But now I'm trying to page break on these subreports and because these subreports all have sub-sub reports, I get this error when I try to run this report..The value '22' is invalid. Valid values are between '0' and '1'. (rrRenderingError)..I am grouping on uniqueidentifers and I do not get errors on subreports that have sub-subreports. How can I avoid this error and get these subreports to page break? (I don't get any errors if I remove the page breaks).
View 3 Replies View RelatedI have a group in my report that contains an empty footer row to get a better visibility. Because the row has a frame it should be hidden if its the last row on the page. How can I manage that?
View 4 Replies View RelatedI created a subreport1 with tablix.I created second subreport2 that has a tablix and one column chart and both are placed in a rectangle. No page break is applied to this rectangle. When I run the sub report, both tablix and Column chart are displayed on one page .
I created a main report and added Subreport 1 and Subreport 2 in 2 different rectangles. I set page break property of Rectangle(Subreport1) to End and no page break is applied to Rectangle of Subreport2.
When I run the main report, subreport1 is displayed in one page, subreport2 is displayed in 2 different pages.
SSRS 2008 R2
I have two level of grouping Example:
:::HEADER:::
A [GROUPING 1]
B[GROUPING 2]
C[GROUPING 2]
When I apply Page Break
:::HEADER:::
A [GROUPING 1]
B[GROUPING 2]
:::HEADER:::
A [GROUPING 1]
C[GROUPING 2]
[URL]
In ssrs text box data is coming from database in single line .But actually it is of two different paragraph.so how to break the paragraph data in two different line .
View 8 Replies View RelatedI'm having an odd problem that I've never experienced before. I have a couple of tables and then a bunch of text fields. Each table needs to start on a new page, as does the collection of textboxes. I can accomplish this for the two tables but not for the text boxes. When I set pagebreadatend to true for the second table, the textboxes come right after it as if it were set to false. I even embedded a rectangle in btween the table and the textboxes and set its pagebreakatend to true, but this also did not have the expected effect. What is going on here? There's nothing funky about this report, no subreports, no conditional visibility, etc.. Thanks for any help!
View 1 Replies View RelatedWhen the SSRS report exported to CSV file, all the column headers are added in the first row. The issue here is, I have hidden( thru Visibility property) some of the columns in the report but those columns are also displayed in the header row(first row)CSV file and the blank values for their corresponding data.for example, I have displayed only below 3 columns out of 6 columns in the report.col1, col2, col3but the CSV generated as below:
format..col1,col2,col3,col4,col5,col6a1,a2,a3,,,b1,b2,b3,,,c1,c2,c3,,,
I don't want the highlighted items.The TableColumn Visibility property has been setup as below..
=IIF(Fields!col4.IsMissing, TRUE, FALSE)
When the report is exported to other formats(like Excel,XML..) this works fine.. i.e., no hidden columns are displayed.
I have 400 records in my report , i want display 20 records per page , how can i do the same in ssrs.
View 18 Replies View RelatedI must be missing a check box somewhere........ I simply added a group to a report and need to do a "Page Break Before" each group. I found the check box to do that, and the report works as expected, BUT I get a blank fist page. So how do I prevent a "page break" on the "first time through"?
View 11 Replies View RelatedI have a report which shows around 8 columns. The report is in landscape mode(Width -11in and Height-8.5 in). I want to display only header in the first page means basically I want to add a cover page.
I have used tablix to display data. To display an empty page, I have added a rectangle before tablix and made add a page break after true. But while exporting to pdf, I am getting 2 blank pages with header. But I need only one.
How to hide page number based on tablix availability?
I would like to hide all page number once a specific tablix has data!!
when I try to open the SSRS in BIDS ( VS 2008), it is displaying the code portion alone. If i click 'View Designer', it prompts me like "....already opened. Do you want to close?" Only XML content of report is displaying. if I click 'Viee Code' then it displays error like "There is no editor available for 'c: eport Sample. rdl'.Make sure the application for the file type (.rdl) is installed."how to correct this issue by installing or by upgrading?
View 6 Replies View RelatedI have created a report that sharing two datasets for displaying the data. This datasets are using Stored procedure for execution of the report.One of the stored procedure using Order by clause and returning the data.But on running the report , the report viewer displays the unsorted data of the filed. But if we run the stored procedure directly from the sql server , it will return the sorted data.
View 8 Replies View Relatedsql server edition-2008 enterprise evaluation edition
Operating System- Window Server 2008 R2
I've Created Local Smtp to use gmailid for Subscription of SSRS Report by Email as we don't have an Exchange Server.
User this link to Create local SMTP
Studied few blogs that related it to agent service running under local system account, on my machine it was running on NT/NetworkService change it to Administrator of local Machine. Did same change for Database Engine of Service of SQL Instance.
FYI- My Machine is not in Domain, so used local administrator for giving rights to service mentioned above.
Below is the Screen Shot of rsreportserver.Config File
ERROR : on Report Manager
Below is report log on after time report was executed.
library!WindowsService_16!2b30!05/20/2015-13:19:05:: i INFO: Schedule 3374e590-8374-4360-b5da-d487eacb0417 executed at 05/20/2015 13:19:05.
schedule!WindowsService_16!2b30!05/20/2015-13:19:05:: Creating Time based subscription notification for subscription: ea7fc6ce-00df-4f6a-9050-e713986307ca
library!WindowsService_16!2b30!05/20/2015-13:19:05:: i INFO: Schedule 3374e590-8374-4360-b5da-d487eacb0417 execution completed at 05/20/2015 13:19:05.
[code]....
PS: Local SMTP is working, i.e. i am able to receive email if i place an email.text file in C:inetpubmailrootpickup
We had migrated the SSRS reports from 2008 R2 to SSRS 2012 SP2 version. We had a strange issues after migration.
The report which is having images is not working and it just hangs.
The reports which doesn't have any images are working fine.
On top of it some times we are getting the following error message.
Error message : The request failed with HTTP status 503: Server Error.
Hi,
I've been looking for a way to apply a page break in my report and I've read a few of the solutions presented in the forum. However, to my understanding, they are only applicable to SSRS 2005. Is there a similar hack around the problem for 2003?