In my Chart I have to keep the angel of the category field fix to 90 degree. When I do this the format of the Label does not look quite right.
I expect Below : I can work Out dd and mm positions ..what I am concerned about the date direction because of which its not quite readable.
I have tried many format in label format but it is not giving expected result.
I have pie chart. In this i have to display the category group name , count as a data label. In this both category name and count should be in seperate line and should be in centre allignment. But for it is not centre allignment. In series label properties i am using this expression,=Fields!Group.Value & VbCrLf & Count(Fields!Countvalue.Value).I am geeting new line. But not in center allignment.
I have created range bar chart and I am not able to achieve the following tasks.
1. Change X-axis Label Format to Quarter:
I have x-axis with dates and y axis of project groups. I have changed x-axis interval type = month and interval=3.
Set the Maximum = Max(ProjectEndDate) and Minimum = Min(ProjectStartDate).
Now my chart showing 3 months x-axis interval dates in mm/dd/yyyy format. I want to change this interval date format to Quarter. The problem is LabelsFormat property is not recognize the "=Q or q or quarter" and also not accepting the expressions. How can I achieve this?
2. Placing series side by side when it is not overlapping
I want to place the same group series side by side only when the previous project end date is less than next project start date, otherwise place the next project to next row. How can I achieve this?
I have a Pie Chart report that works well until Users discovered that when values are 0% or less across the chart, the Legend returns NaN. How do I format the Legend to return 0% instead of the NaN that Users do not want to see. Below is my express for the Legend Property="#AXISLABEL" & " - " & "#PERCENT{P0}".
When I place an image WITHIN a chart, it appears in the correct location in DESIGN mode, however, when I preview it, my chart renders...and then the image renders NEXT TO the chart. I can't get the image to display WITHIN the chart area.
I have this issues with empty points in a Line Chart. How to make it work with dynamic values in the series and some dates in the category, how to join the "data" values for a "series"where there are no category value. So far I cannot see any fix that would make it work by joining the data points with the "average" data on a empty point (no category value) and with the same color on the line.
Some labels such as 33314 are displaying over the columns. I need all labels to display at the top. How can I fix this without changing the size of the chart?
I have created an SSRS report containing a bar chart. The Y-axis contains some application names which are displayed based on a certain criteria. Hence sometimes there are only 2 values in y-axis while sometimes it may range upto 20 items. I have tried a lot but have been unsuccessful in getting a dynamic y-axis which changes with the number of items present.
When i change my managed pipeline mode to integrated mode for my web application, the ssrs reports with images in it are not loading. It is showing as cross mark. However it works in classic mode.
In a bar chart, we are using the LargeCheckerBoard as the pattern style in series properties > fill. It is showing correctly on the browser but if we export to PDF, this style(checks) are getting small and different from what shown on the browser.
What is the best optimised options to display the date labels with bi-weekly intervals starting date Date from one month to three months future from the current date?
As per above requirements, I have built the below line graph query and graph, currently it only displays the date labels as per data but I need to display date labels with bi-weekly intervals starting date from one month to three months future from the current date. Also another issue found, if there are few more date labels then does not show all labels on horizontal axis.
Select /* Set Week End date as Sunday */ DATEADD(DAY, 7 - DATEPART(WEEKDAY, t.TaskBaseline0FinishDate), CAST(t.TaskBaseline0FinishDate +1 AS DATE)) as[WeekEnd] ,count(t.TaskBaseline0FinishDate) as Baseline ,count(t.TaskFinishDate) as Finish
A customer would like to show speech bubbles with a short text above some bars in a bar chart (similar to the image shown below). Is this possible with SSRS?
We developed some of the chart reports. It is working fine when we preview the reports in the solution itself. After deployment to reportserver, when we access the same report, It is showing empty rectangle box (border of chart body). We have already checked data source/ Dataset mapping for the report.
I have a report in which I have assigned custom colors with a function to one of my stacked column charts. When I run it in the report builder, the colors are correctly placed, but as soon as I upload the report to the server and view the report from there, the colors get swapped. I have these custom colors applied to other stacked column charts in the report and they work perfectly fine. The only difference between this chart and my other charts is that it contains two category groups.
EDIT: Alright, I have gotten it to display the correct colors by using a function with the colors I wanted in reverse. I have two values, "Upcoming" which is displayed in red, and "Outstanding" which is displayed in blue. If the chart has only upcoming values, it will display in blue rather than red, whereas if I have upcoming and outstanding values, they will display in their correct colors. why this is occurring?
I am using the below expression for hidding the zero data labels in ssrs chart.=IIF(Fields!Name.Value=0,False,True). But this expression is working for some other charts. It is not wrking for only charts. I could not find the solution for that. How to hide the zero values.
Data lables in ssrs reports are getting overlapped in stacked chart. Since it is satcked chart i can't place labels outside the bar.Due to this it is not visible clearly. how to avoid this issue?
I have created a ssrs report using ssrs-2012 that contains 2 tables 2 pie charts and 1 line chart. But I am unable to see 2 pie charts and and 1 line chart after deploying the rdl in sharepoint server.
Why I am not able to see those charts, or sharepoint server will not support charts at all.
I have a scatter chart in SSRS (SQL Server 2012, Visual Studio 2010) that is producing the following:
There are five data points on there, however the result set I am using has 10 rows (a 'Completed Date' of datetime and a 'Lateness' integer whose values can be positive or negative.
This is the Dataset and the results it produces:
SELECT DISTINCT TOP 10 a.ACTIVITY_NAME As [Activity Name] , ad.COMPLETED_DATE As [Completed Date] , ad.DAYS_LATE As [Lateness] FROM ACTIVITIES a JOIN ACTIVITY_DATA ad ON ad.ACTIVITY_ID = a.ACTIVITY_ID
[code]....
How can I tell SSRS to show every data point in my chart?
The above chart has three Values in it (slightly late in pink, rather late in hot pink and very late in red). Because of the ordering of these values the red very late values can't be seen. When I shuffle the order around slightly they are indeed there:
...This report runs dynamically for one of a number of activities the user can select, as such I have no way of knowing which of these series will be at the lower end of the scale and which will be at the higher end. Is it possible to set the Values/Series to be transparent so I can be assured that all will be visible to the user at runtime?
I have a chart with series that needs conditional colour for three conditions. One condition must be transparent. I have tried the various IFF or SWITCH expressions below and some work fine in SSDT but when I deploy them to the browser the formatting is lost. This simple IFF expression works. The series is transparent as required both in SSDT (Visual Studio BIDS) and IE11 and Firefox browsers but I need two other conditions.
Both of the expressions below work in SSDT (Visual Studio BIDS) as expected but when deployed to the browser none of this formatting is rendered and all series are in blues even the ‘transparent’ series. No red at all.
I have tried deleting various files RDL and DATA. I have tried uploading the file from report manager in IE and I have tried editing the file in report manager.
I have a range bar chart Inside a table of row group and the chart is repeatedly generate according to category ,i want to increase chart height dynamically based on category.
suppose for if category =A THEN CHART HEIGHT=10CM category =B THEN CHART HEIGHT=7CM
I'm using a bullet chart in a SSRS report and I want to set the Maximum value in the Linear Scale properties to highest value of the following 4 fields. Is there any way to do this?? This will make all charts line up properly.
I need the Trend line for the following data in Line chart they are the following data. The following are the graph are my output and i need the trend line for these Key_gap value.
This is the link [URL] ....
I need the same trend line for the Bar-Chart in SSRS 2005.
When I export the report in excel format the chart is displayed as picture. I want it to be displayed as editable chart.Does Office Writer work in this situation and did anyone use Office Writer to accomplish same type of problem.Is there any other method or product we can use instead of the office writer.
I need to create a chart with the following features
1) Bar chart that has data for 3 years (3 series) 2) Line chart that has the same data as per the above points on the bar chart but this is a running total. (3 series) 3) These data points are for the 12 months 4) there should be a secondary axis for the cumulative one