I have created a query in which I have used first_value, lead, lag windows functions. I tried using the query in SSRS query text, but for some reason it could not load. Then I created a stored procedure and implemented that query in stored proc.
The problem is that I am able to execute the stoured proc from sql server studio, but SSRS is not able to load data.
Created a report with parameters that can have multiple values.
Ran Stored procedure with same above criteria and data is retrieved
Ran the report and no data is displayed
I am unable to figure out where it might have gone wrong.
I have a stored procedure (sproc) Â running in Firebird Database. Now I try to use this sproc to build a report in the SSRS 2012 (SSDT) Report Designer.
After I connect to the dataset, and when I choose the Query Type as 'Stored Procedure', and type the name of  my sproc, and then go to the Query Designer, and click ! (F5)  ,  I get the following error:
TITLE: Microsoft SQL Server Report Designer
------------------------------
An error occurred while executing the query.
ERROR [HY000] [ODBC Firebird Driver][Firebird]Dynamic SQL Error
SQL error code = -104
Token unknown - line 1, column 1 [sproc name]Â
ADDITIONAL INFORMATION:
ERROR [HY000] [ODBC Firebird Driver][Firebird]Dynamic SQL Error
SQL error code = -104
Token unknown - line 1, column 1 [sproc name] (OdbcFb)
------------------------------
BUTTONS:
OK
------------------------------
how to resolve this? If its a T-SQL sproc, then it will be no issue; in this case, Â Firebird database connects to the SSRS via a 32-bit System ODBC connection.
When I proceed and click ok for everything, I get this error (after I exit the Query Designer), in the Dataset Properties tab:
"Could not update a list of fields for the query. Verify that you can connect to the data source and that your query syntax is correct."
The ODBC connection between SSRS and Firebird works fine. In fact I am able to run many queries as ad-hoc ones, Â but when I use the queries as sprocs, then this issue pops up.
how to handle Firebird stored procedures  in SSRS.
I have a requirement to display each student Fitness test results in the form of a Box plot chart with High Whisker , Low whisker , Low box,high box , Mean and Median in a stored procedure since test areas are dynamic. But , i have never done this before.
Test Type
TestSeq
Test Date
Student ID
TestArea
Test Result
[code]...
I am trying to create an SSRS report to display a single row of Household information (from CRM Dynamics) Household being the Parent Entity, with 1:N relationship with Contact Entity.
How would I go about showing all the Firstnames (from Contact) in the same cell like the below?
I have created a custom library(CodeLibrary) which internally references the dlls Microsoft.TeamFoundation.Client and Microsoft.TeamFoundation.WorkItemTracking.Client.
I added this custom Dll codelibrary.dll to my SSRS report. and the expression of one of the field asÂ
=codelibrary.codefunction.GetValue(1000) Â
codefunction is the class and GetValue is the method.
When I preview the report, I get the error "Error while loading code module:
'CodeLibrary,Version=1.0.0.0,Culture=neutral,PublicKeyToken=null'. Could not load file or assembly 'CodeLibrary,Version1.0.0.0, Culture=neutral,PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified."
I am using VS2013, I have placed the custom library DLL in the path
C:Program FilesMicrosoft Visual Studio 12.0Common7IDEPrivateAssemblies
I have tested the custom library with a WPF application and it works fine.
I am not able to figure out what is causing this error.
I have a report with multiple datasets, the first of which pulls in data based on user entered parameters (sales date range and property use codes). Dataset1 pulls property id's and other sales data from a table (2014_COST) based on the user's parameters.
I have set up another table (AUDITS) that I would like to use in dataset6. This table has 3 columns (Property ID's, Sales Price and Sales Date). I would like for dataset6 to pull the Property ID's that are NOT contained in the results from dataset1. In other words, I'd like the results of dataset6 to show me the property id's that are contained in the AUDITS table but which are not being pulled into dataset1. Both tables are in the same database.
I have a report that uses a stored procedure as a dataset.The stored procedure accepts four parameters, which I have defined in the report. works fine in query builder and SSMS.
When I run the report I get an error stating a parameter is missing. I tried deleting parameters and recreating not luck.
What might be the reason for this error:
A propos above error, traying to open [URL] ....
I am getting this error:
User 'domainuserName' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions have been addressed.
How to proceed with this ?
If I have a stored procedure that returns 15 tables, how do I distinguish the tables to assign variables to each table in c#?
View 6 Replies View RelatedHi
I have created CLR Stored Procedure and my CLR stored procedures are not appearing in the Stored Procedures drop-down list located on the Data tab within the VS2005 Business Intelligence Development Studio. After Creating the dll I have registered the dll like that CREATE ASSEMBLY MY_SP_NAME from 'C:MY_DLL_PATHMY_DLL_NAME.dll' WITH PERMISSION_SET = SAFEAfter registering I have deployed the dll :CREATE PROCEDURE [dbo].[MY_SP_NAME] @dbname [nvarchar](4000), @varTable [nvarchar](4000), .............. .............. .............. ASEXTERNAL NAME [MY_DLL_NAME].[MY_CLASS_NAME].[MY_SP_NAME]GOEXEC sys.sp_addextendedproperty @name=N'AutoDeployed', @value=N'yes' , @level0type=N'SCHEMA',@level0name=N'dbo', @level1type=N'PROCEDURE',@level1name=N'MY_SP_NAME'GOEXEC sys.sp_addextendedproperty @name=N'SqlAssemblyFile', @value=N'EXAMINER_WORKSHEET_F_hmz4_Ex.cs' , @level0type=N'SCHEMA',@level0name=N'dbo', @level1type=N'PROCEDURE',@level1name=N'MY_SP_NAME'GOEXEC sys.sp_addextendedproperty @name=N'SqlAssemblyFileLine', @value=10 , @level0type=N'SCHEMA',@level0name=N'dbo', @level1type=N'PROCEDURE',@level1name=N'MY_SP_NAME'GOThe Stored Procedure is deployed successfully to SQL Server 2005, but its not showing in the drop-down list located on the data tab while I am desiging my RDL layout.All of the non-CLR stored procedures are present. Is there something I need to do to add these CLR stored procedures?
Please please ASAP.
Thanks
Tareqe
Hi all,I am using Stored procedure to design report instead of Query.
Problem is i am unable to view the fields in the dataset.
Any body please tell me the Steps to use Stored procedure in Reporting Services design.
Regards.
I'm working on a report to show financial transactions from a table over a certain period. For most transactions there is a PDF document that is stored in a separate table in a binairy format. In my report I would like to include a link on every line with transaction information in the report that opens the PDF that is linked to that transaction. Just to be clear, I don't want to embed the PDF in the report but I want the users of the report to have the option to view the PDF that is related to that transaction in their standard pdf reader (adobe).
Code to do the following:
Once a user clicks on the link to view the PDF I need the code to get the binairy data of the PDF file from the table, convert it back to a PDF and open it in the default pdf reader (for example adobe reader). If it can't directly open the file then it's maybe possible to activate the 'open or download' pop up that you also get when you download something from a website.Â
I have a big SQL Stored Procedure which works with a cursor inside of it. During the procedure the data is inserted into a table and at the end is a SELECT statement from that table. The problem is that when i create a dataset with that stored procedure and i run it in the Data tab i get the correct select, but in the Fields section of the Report I don't get the fields from the last SELECT, but the fields from the cursor. Am I doing something wrong or is this a bug and how can i fix it.
Thanks!
Hello,
I'm having some problems and I wonder if anyone can help me.
I need to call a stored procedure to retrieve some data from the bank and use it in a report.
I'm using oracle DB, but I'm not using ODBC, I'm using Oracle.
I can call the SP using 2 commands:
1- in the dataset data form, I can select the command type as Stored Procedure and write the name of my procedure without the arguments, and then the VS ask for the arguments
2- in the same form, the command type as TEXT, i can use the syntax: call <SP name>(arguments)
My problems are:
-in the first way, how can I programatically set the arguments to send?
-in both of them, how can I define that the data that should be stored in the dataset is in the out cursor parameter?
Thank you,
Oscar
I have created stored procedure.How can i use it insted of writing Sql Statement in Report Design.
Pls Help me.
Regards.
Hi all,
I have stored procedures that will run fine from query analyzer windows, from other programs, etc. When I try to run the sp from vs 2005 form with in a SSRS project, the sp just hangs. It will not return any records and the app says "Not Responding. This does not happen for all SP's only some of them. Any ideas?
Hi,
I am working with one example on SQL Server 2005 Reporting Services. I have a stored procedure with two parameters. I want to call this stored procedure from SQL Server Reporting Services 2005.
CREATE PROCEDURE spEmp
(
@id int,
@name varchar(150)
)
AS
BEGIN
SELECT EmpId, EmpName, EmpSal FROM Emp WHERE EmpId = @id AND EmpName = @name
END
I want to pass
@id AND @name
parameters from reporting services form. Can you please give me link / article / steps to follow this in SQL SERVER REPORTING SERVICES 2005 ?
Thanks
Rajesh.
Hello,
I have a report. I need to make a drop-down parameter optional. I've setup the parameter to use a dataset as its source, and I need to allow the value to be null. I've selected allow nulls check box, and I've even tried setting the default value to System.DBNull.Value. But, when the entry is not selected (blank), no data ever comes back. If the data is blank or null, my procedure works (I've tested it). How do I send a null value to the database through reporting services report? I was hoping to avoid creating a special query just for that purpose.
Thanks.
I am trying to call oracle stored procedure from SRSS 2005. I am using the syntax { Call s_test_rcur()} . I am getting following error.An error occurred while retrieving the parameters in the query.ORA-00911: invalid characterORA-06512: at "SYS.DBMS_UTILITY", line 68ORA-06512: at line 1
ORA-00911: invalid characterORA-06512: at "SYS.DBMS_UTILITY", line 68ORA-06512: at line 1Â (System.Data.OracleClient)
Here is the Oracel stored proc.
TYPE rc_test IS REF CURSOR;
PROCEDURE s_test_rcur (po_test_rc OUT rc_test, -- returns a record setpo_error OUT INTEGER)ISBEGIN g_err_level := 1;OPEN po_test_rc FORSELECT a.ssn_id,TO_CHAR (a.acad_yr) || TO_CHAR (a.acad_yr + 1) acad_yr,RPAD (NVL (last_name, ' '), 30, ' ') last_name,RPAD (NVL (first_name, ' '), 30, ' ') first_name,NVL (middle_initial, ' ') middle_initialfrom test_tableorder by last_name;po_error := 0;EXCEPTIONWHEN OTHERSTHENpo_error := -1;g_error_code := SQLCODE;g_error_msg :='Err level :' ||TO_CHAR (g_err_level) ||' ' ||SUBSTR (SQLERRM, 1, 250);END;
I used a stored procedure in my report. If I run the sp in Management Studio (on my pc, database is on a sql server) it takes only several minutes; but from reporting services (also on pc) I put it in the data tab and execute it, it takes forever, actually never finish. I want to know why it's taking so long to execute it from reporting services while it returns data instantly from Mgt Studio. There is cursor in the sp. I don't know whether this is the culprit. Anyone knows why? Thanks!
Below is the sp.
--------------------------------------------------------------------
create proc [dbo].[p_national_by_week]
as
set nocount on
declare @s1 nvarchar(2000), @parmdefinition nvarchar(300), @rangestart smalldatetime, @rangeend smalldatetime
, @price_low money, @price_high money, @weekdate smalldatetime
declare c1 cursor for
--- GG change for reg dates.
select weekdate from vtRealEstate_RealtorListing_WeekDates
open c1
fetch from c1 into @weekdate
while @@fetch_status =0
begin
select @rangeend = @weekdate+7, @rangestart=@weekdate
select @s1 = N'
declare @mlsid_count int, @avg_price money, @avg_day_on_market int, @median_price money, @c1 int
select @mlsid_count=count(*), @avg_price=avg(CurrentPricefilter),
@avg_day_on_market=avg(datediff(dd, FirstListedDate, LastModifiedDate))
from vtRealEstate_RealtorListings
where ((FirstListedDate <= @rangeStart and LastModifiedDate >= @rangeStart) or
(FirstListedDate >= @rangeStart and FirstListedDate < @rangeEnd)
)
and currentpricefilter is not null
and mlsidfilter is not null
select @c1=@mlsid_count/2
set rowcount @c1
select @median_price = CurrentPricefilter from vtRealEstate_RealtorListings
where
((FirstListedDate <= @rangeStart and LastModifiedDate >= @rangeStart) or
(FirstListedDate >= @rangeStart and FirstListedDate < @rangeEnd)
)
and currentpricefilter is not null
and mlsidfilter is not null
order by currentpricefilter
insert report_detail_test (weekdate, mlsid_count, avg_price, median_price
, avg_day_on_market)
values(@weekdate, @mlsid_count, @avg_price, @median_price, @avg_day_on_market)
', @parmdefinition=N'@rangestart smalldatetime, @rangeend smalldatetime, @weekdate smalldatetime'
exec sp_executesql @s1, @parmdefinition, @rangestart=@rangestart, @rangeend=@rangeend
, @weekdate = @weekdate
fetch from c1 into @weekdate
end
select weekdate
, mlsid_count
, avg_price
, median_price
, avg_day_on_market
from report_detail_test
order by WeekDate
Created a report that displays the Maximum Response time (example of value 00:00:00) which is directly pulled from the Stored proc.When I ran the report, the column displays blank values.I am not sure if I should add any conversion to the Response value in the report.
View 2 Replies View RelatedHi
I was wondering if it was possible to call reporting server web service directly from my sql server stored procedure. The call that I need to make to reporting web service needs to generate the report in a PDF format.
I am using SQL Server 2008 R2 SP1, and BIDS 2008 SP1. The problem I am about to define does NOT happen when the report is deployed to the report server, but only within the report development environment (BIDS).
From within BIDS my reports are fed by stored procedures. The problem is when I modify a stored procedure in Management Studio, and refresh the report from within BIDS, the report does not reflect the new changes made in the stored procedure. So far I have found one clumsy solution to this problem:
1) Go to the folder where the project is saved on the file system.
2)Find the ".data" file that is associated to the particular report, then delete it. For instance, if my report name is TestReport.rdl, find the file named TestReport.rdl.data, then delete it.
Currently we are using Custom Delivery Extension for SSRS 2008R2 We are planning to move it SSRS2012
My Question is: Whether we can use the same Code used for SSRS2008R2 to SSRS2012?
if not what code changes we should do?
I have an issue with using multiple parameters in SQL Reporting services where data is passed in from a stored procedure
When running the report in design mode - I can type in a parameter sting and it runs fine
In the report preview screen I can select single parameters by ticking the drop down list and again it runs fine
as soon as I tick more than one I get an error
An error occurred during local report processing
Query execution failed for data set €˜data'
Must declare the scalar variable '@parameter'
Some info...
The dataset 'workshop' is using a sproc to return the data string?
I get multiple values back fine in the sproc using this piece of code
(select [str] from iter_charlist_to_table( @Parameter, DEFAULT) ))
I have report parameters set to Multi-Value
Looking through the online books it says...
You can define a multivalued parameter for any report parameter that you create.
However, if you want to pass multiple parameter values back to a query, the following requirements must be satisfied:
The data source must be SQL Server, Oracle, or Analysis Services.
The data source cannot be a stored procedure. Reporting Services does not support passing a multivalued parameter array to a stored procedure.
The query must use an IN clause to specify the parameter.
Am I trying to do the impossible ?
Hi
I have written a stored procedure that returns 8 tables.
When I try to design a server report based on this stored procedure, reporting services only recognises the first table and not the other 7 tables.
I am using SQL Server 2005 and Visual Studio 2005.
Thank you in advance
Jav
Is there any way to get the report toolbar using SOAP Api  in SSRS reporting.
View 6 Replies View RelatedWe've got a requirement to build the real time report. user can browse report at any point of time and need to see the latest data(stock market) in the report.
I've few options down...
1. Directly point to OLTP database as source and write stored procedure to show result set.
2. Replicate the database and write the SP's to reports. To avoid pointing directly to OLTP db.
3. To build the datawarehouse with dim & facts to show it in reports. I prefer this as a standard method, but this would have some latency depending on trasaction load which will differ from the requirement.
We built our prod server [vm] with SQL Server 2008 R2 on Server 2008 R2. It works nicely. Then we made a copy of the VM and renamed it (so our test environment would be IDENTICAL to production). After that, SSRS was broken: I get "HTTP Error 503. The service is unavailable." I can't connect via http, or SSMS.
We have tried:
*Â Running SSRS config tool (several times)
* Running with/without the IIS Server Role
*Â Dropping & recreating the SSRS keys
*Â Recreating the ReportServer database, etc
*Â Checking all of the accounts, permissions, etc
*Â Running SQL Repair
*Â Going through the registry to fix any references to the machine's old name
*Â Uninstalling, reinstalling SSRS
* Completely uninstalling ALL of the parts of SQL Server 2008 R2, deleting all directories, removing references to SQL Server from the registry, rebooting, reinstalling everything.
None of this has worked. SSRS [R2] is still 503 on our test box.
the SSRS [NT] service seems to run, without error. The Event Viewer doesn't seem to be recording any errors. The SSRS logs say that the default URL is wrong, but we get the same error in Prod, and Prod works fine. The other SQL Logs say something about not being able to contact the service. However, as I said, the [NT] service seems to be working fine.
Is the any issues running SQL 2005 Reporting Services on Load balanced web servers?
View 1 Replies View RelatedHello Everyone,
I have installed SQL Server 2005 with Reporting Services on Windows Server 2003. I can run through reporting services configuration and completed all the required steps to initialize it. I can access the reports through //localhost/reportserver and I can also access the reports through Microsoft CRM. But I cannot access the Report Manager (//localhost/reports). I get this Error:
Server Error in '/Reports' Application.
Could not load file or assembly 'ReportingServicesWebServer' or one of its dependencies. The system cannot find the file specified. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.FileNotFoundException: Could not load file or assembly 'ReportingServicesWebServer' or one of its dependencies. The system cannot find the file specified.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Assembly Load Trace: The following information can be helpful to determine why the assembly 'ReportingServicesWebServer' could not be loaded.
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLMSoftwareMicrosoftFusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLMSoftwareMicrosoftFusion!EnableLog].
Stack Trace:
[FileNotFoundException: Could not load file or assembly 'ReportingServicesWebServer' or one of its dependencies. The system cannot find the file specified.]
System.Reflection.Assembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) +0
System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +211
System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +141
System.Reflection.Assembly.Load(String assemblyString) +25
System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +32
[ConfigurationErrorsException: Could not load file or assembly 'ReportingServicesWebServer' or one of its dependencies. The system cannot find the file specified.]
System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +596
System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai) +70
System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection compConfig) +177
System.Web.Compilation.BuildProvidersCompiler..ctor(VirtualPath configPath, Boolean supportLocalization, String outputAssemblyName) +180
System.Web.Compilation.ApplicationBuildProvider.GetGlobalAsaxBuildResult(Boolean isPrecompiledApp) +3561465
System.Web.Compilation.BuildManager.CompileGlobalAsax() +51
System.Web.Compilation.BuildManager.EnsureTopLevelFilesCompiled() +462
[HttpException (0x80004005): Could not load file or assembly 'ReportingServicesWebServer' or one of its dependencies. The system cannot find the file specified.]
System.Web.Compilation.BuildManager.ReportTopLevelCompilationException() +57
System.Web.Compilation.BuildManager.EnsureTopLevelFilesCompiled() +612
System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters) +521
[HttpException (0x80004005): Could not load file or assembly 'ReportingServicesWebServer' or one of its dependencies. The system cannot find the file specified.]
System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +3540923
System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +69
System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) +275
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
Any ideas? I have done some searching, but could not find any viable solutions. Please Help
Regards,
Ray
We have recently upgraded our .Net web application from a windows 2003 server to a windows 2012 server. Since this happened users that are trying to print a reporting services report is getting the error "Unable to load client print control". We are using reporting services 2012, but the application is using the 8 version of the viewer. The reporting services server did not change only the application server. The code for the application did not change.
View 4 Replies View Related