Reporting Services :: Set Default Values For Selection List Navigator For Data Source View
Jul 14, 2015How to set default values for selection list navigator without using parametrized queries for data source view.
View 2 Replies
ADVERTISEMENT
Reporting Services :: Data Not Available For Selected Values To Be Set Based On Data Source
Jul 10, 2015I have 4 Tablix and 2 of the Tablix get data from Server 1 and other 2 get the data from Server 2.I have set NoRowsMessage "=Data Not Available for the Selected Values" for all the 4 Tablix.Now if data is not available from Server 1 then I must show "Data Not Available for the Selected Values" only once in the outputbut now its appearing twice in the output because of the 2 tablix that had no rows.Similarly if data not available from Server 2 then it should show "Data Not Available for the Selected Values" only once in my output.If Data not avilable from all the Tablix then also i t should show only once as "Data Not Available for the Selected Values" in the report output.
View 3 Replies View RelatedReporting Services :: Two List View - Get Job Info From Table
Oct 2, 2015I need ssrs report which get job info from job table in list control and other one is jobid and workdate which also need to be group by and storeproc I am using for this report is as follow:
ALTER proc [dbo].[VRAJ_JobScheduleReport]
@JobID int = null, @StartDate varchar(25) = null, @EndDate varchar(25) = nullASSET
NOCOUNT ON SET ANSI_NULLS ON SET QUOTED_IDENTIFIER ON DECLARE @sql varchar(max);DECLARE @param varchar(max);DECLARE @where1 varchar(max);DECLARE
@where2 varchar(max);SET @param='';SET @where1='';SET @where2='';IF @JobID IS NOT NULL BEGIN
SET @param = @param + 'DECLARE @JobID int; SET @JobID=' + CAST(@JobID AS varchar(50)) + ';'; IF @where1 = ''
[Code] ...
I need ssrs report which get job info from job table in list control and other one is jobid and workdate which also need to be group by and storeproc I am using for this report is as follow:
ALTER proc [dbo].[VRAJ_JobScheduleReport]
@JobID int = null,
@StartDate varchar(25) = null,
@EndDate varchar(25) = null
AS
SET NOCOUNT ON
[Code] .....
Reporting Services :: Count Values In A Column Based Upon Distinct Values In Another Column In SharePoint List
Sep 7, 2015We have SharePoint list which has, say, two columns. Column A and Column B.
Column A can have three values - red, blue & green.
Column B can have four values - pen, marker, pencil & highlighter.
A typical view of list can be:
Column A - Column B
red - pen
red - pencil
red - highlighter
blue - marker
blue - pencil
green - pen
green - highlighter
red - pen
blue - pencil
blue - highlighter
blue - pencil
We are looking to create a report from SharePoint List using SSRS which has following view:
red blue green
pen 2 0 1
marker 0 1 0
pencil 1 3 0
highlighter 1 1 1
We tried Sum but not able to display in single row.
Reporting Services :: Pass Parameters - Error In List Of Values In IN Clause
Nov 30, 2015I have created a ssrs report which connects to vertica database through odbc connection. When I try to pass parameter value through parameter (e.g.: column name IN (@parameter) ) then getting error message in query designer prompting "Error in list of values in IN clause. Unable to parse query text. ". Using sql server 2012 , visual studio 2010 version and HP Vertica 7.1 .
View 6 Replies View RelatedReporting Services :: Plotting Longitude And Latitude With Power View From Multidimensional Source
Sep 2, 2014I have a SQL 2012 SP1 environment integrated with SharePoint 2013. I have deployed a Multi-Dimensional Cube, due to the need for role playing dimensions and numerous parent-child hierarchies that can't be 'flattened' out easily, it's for this reason that we have gone multi-dimensional, rather than tabular.
The issue I now face is trying to plot the data on a map in Power View. It has to via Longitude and Latitude or easting and northing if possible. I know if I use PowerPivot, I can query the MD Cube, get my dataset and make sure the model views the lat/long as coordinates and this method works just fine - however, it involves an extra step, the end user must pre-build their query in PowerPivot before they can use the Power View maps and adhoc analysis, this can create a lot of back and forth when refining your query or performing additional 'what if' analysis.
When I create the Report Data Source in SharePoint to connect directly to the MD Cube, rather than going through Power Pivot, it's able to connect, but does not recognise the lat and long fields as Latitude and longitude, nor will it let me manually drag it into the lat and long fields on the field list. If I drag them into the 'location' section, it does not plot correctly.
How to get Power View to plot Latitude and Longitude from a Multi-Dimensional Source without having to go through PowerPivot?
Date Selection Giving Default '1/1/1900' For NULL Values
Feb 9, 2005'XXX_DTE' is character type which wont take NULL.
SELECT CONVERT(Datetime,XXX_DTE) FROM XXXX
I get result as : 1/1/1900
Why is it so.....
What I expect is '0000-00-00 00:00:00.000'
Integration Services :: Source Script Component To Read Data From Sharepoint List?
Apr 29, 2015All examples I found refer to classes under Microsoft.SharePoint namespace. However, I have the SharePoint CSOM that only gives me the Microsoft.Sharepoint.Client namespace.
I need to read the selected values of a multichoice field, but not sure how to do it with classes in the namespace above.
everthing works, exept the TSQL_x0020_Reference_x0020_Numbe field.
my code looks like this:
Webweb = cont.Web;
cont.Load(web);
cont.ExecuteQuery();
Listsstest = web.Lists.GetByTitle("T-SQL
Code Review Tracking");
//CamlQuery query = CamlQuery.CreateAllItemsQuery();
[code]....
Parameters In Reporting Services And Data Source Is Analytical Services
Dec 10, 2007
My requirement for the parameter is multivalue parameter with a text box. for example when user enters aa15 it need to include product aa15. when the user enters aa15, aa16, zz15 than it needs to include all the three products. the last case is when the user enters AA** than i need to inclued all the products start with AA. when i use default multivalue parameter with data source analytical services than i am getting a drop down box. I dont want that. I need a text box where user can enter the value.
1. In sql we have a like key word to query . for example select * from product where product like "AA%".
what is equavalent mdx query to get such results ?
2.How to impliment the multivalue parameters without using dropdown box?
Reporting Services + Analysis Services Data Source
May 15, 2007Hi all,
Till now all the reports for our application was created in Reporting Services 2005 with SQL Server Database(OLTP) stored procedures.
Most of the reports take 10 to 15 report Parameters and all are multi valued.
Now because of the slow response time,we have decided to use OLAP cubes data source. We have created the OLAP cube in Microsoft Analysis Services.
Can someone tell me how to use the report parameters to query the Cube.
Any links,books for reference would be of great help..
Thanks,
Looking forward to your replies
Reporting Services :: Error When View Reports Or Manually Processing TFS Data Warehouse And Analysis Services Cube
Apr 24, 2015I am trying to configure the reporting for TFS using SQL Server. But I get following error when viewing any report:
So I try to manually process the cube to check if it works. I am following this article: [URL] ....
When I click on GetProcessingStatus and invoke it (with last field set as TRUE) I get following error:
How to resolve this issue and be able to see the reports.
Reporting Services :: Excel As Data Source In SSRS
May 19, 2015I want to run SSRS report directly by connecting Excel as a data source. The report runs properly from SSDT, but when it is run from Report manager, some users cannot access the Excel connection and the report execution fails. I am using SSRS 2012 and Excel 2010.I have created the ODBC data connection in SSRS and when I use 'Windows Integrated Security' option for credentials, the connection gets successful. But the problem is that all users does not have permissions to access the Excel inline, but they should get the report working.How can I store the credentials to access the Excel in SSRS with a specific username and password?
View 4 Replies View RelatedReporting Services 'Cannot Create A Connection To Data Source'
Apr 3, 2008
I have set up a report on reporting services and deployed it on a server. (server A)
The data comes from 2 databases - one on Server A and one on server B
I can view the reports when logged into Server A, but if I try to view them from a networked PC I get the following message:
An error has occurred during report processing.
Cannot create a connection to data source 'byvshs01'.
For more information about this error navigate to the report server on the local server machine, or enable remote errors
Byvshs01 is Server B.
However, if I remove the data from server B from the report, I can view it ok. So it seems you can view data from a DB located on the server that hosts the reports, but not if the DB is located elsewhere.
Is there any way around this?
Reporting Services :: Cannot Create A Connection To Data Source
Apr 21, 2015An error has occurred during report processing. (rsProcessingAborted)...The execution failed for the shared data set 'DataSet1'. (rsDataSet ExecutionError )...Cannot create a connection to data source ' Data source for shared dataset'. (rsErrorOpeningConnection)...the above error message I get on the published report, but everything works fine when I do a preview in Visual Studio.How can I see exactely what is wrong?
View 22 Replies View RelatedReporting Services :: Datazen Truncated Data Source
Nov 5, 2015When Datazen caches a data source, it sometimes says that the data was truncated. What factors are involved in the truncation and what I might be able to do to expand the size of cached elements to avoid truncation? My only current solution is to make the data source "Real Time" rather than cached.
View 3 Replies View RelatedAccess Denied To Data Source Reporting Services 2000
Dec 19, 2006I have data on server A and the report server on server B.
I have created reports that I can run through report manager (on server B).
I have depolyed the reports but when I try to run the reports on client computers I get the following error:
An error has occurred during report processing. (rsProcessingAborted) Get Online Help
Cannot create a connection to data source 'ABCD'. (rsErrorOpeningConnection) Get Online Help
SQL Server does not exist or access denied.
I have tried setting different credentials ... windows security, specified username and password to credentials not required ...
All give above error.
TIA
Reporting Services :: Web Service As Data Source With Basic Authentication
Aug 2, 2011Is it possible to configure a datasource using data from a web service (java) requiring basic http authentication?
View 4 Replies View RelatedReporting Services :: Combining Two Different Data-source In Single Matrix?
Jun 16, 2015i have to to combine two dataset in single matrix my sample scenario in below attached for reference.
in this first matrix values from one server and second one is another one server.
how to connect these to for getting desired result of thrid matirx.
in this 1,2,3,4,5,6 is in column grouping
how to solve this in using LOOKUP or CUSTOM CODE
Reporting Services :: Data Source Account And Folder Access
Apr 28, 2015I have a question about ssrs security. In report manager I have set a list of users as browsers, and the builtin administrators are content manager in the parent folder where reports are. A user that is not an administrator and neither a user I added, has access to reports.
I'm thinking this person is having access because the data source of the reports use a administrator account to connect to the analysis services using the option Credentials stored securely in the report server with the 2 checkboxes marked (use as windows credentials when connecting to the data source and impersonate the authenticated user).
I simply marked this option because SSRS is in 1 server and SSAS in other and I think kerberos need to be configured and I haven't looked into it, but I think the report access is separated from the data source.
Integration Services :: SSIS Excel Data Source Numeric Values Returned As Null
May 8, 2009I'm using SSIS 2005 Enterprise edition, I'm creating a package that reads an excel (xls) file using the "excel source" component, and it dumps the data into an OLEDB destination (a sql server). When I drag the excel source component and create the excel connection to my file the component automatically reads the columns and their datatypes.
The problem is that I have a column which has numeric data and the package uploads as NULL every number that starts with a zero. (note: in excel this column is formatted as "text", despite it has only numbers, because it's the only way excel maintains the left sided zeros).
So I checked the data types by right clicking the excel source component -> show advanced editor and my surprise is that this column's data type is detected as double-precision float, and it doesn't let me change it. URL... but it only works when the first row of data has a number beginning with zero on this column. How to get the data imported correctly?
Reporting Services :: Passing Parameters To SSRS That Is Using Web Service As Data Source
Jul 16, 2009I am building a webapp that calls an SSRS instance to display a report based on another servers web service.I can make a call from the ssrs server using this in the RDL:
<Query>
<Method Namespace="http://machine/webservices" Name="HelloUser">
<Parameters>
<Parameter Name="user">
<DefaultValue>Craig</DefaultValue>
</Parameter>
</Parameters>
</Method>
<ElementPath IgnoreNamespaces="true">*</ElementPath>
</Query>
This works no problem. but.. I want to have the user parameter "Craig" be a parameter passed in from the web app. If it were a regular SQL data source you would put @user in the query. How do you do it with XML text queries?
Reporting Services :: Passing Report Parameters To A Query Using WCF Data Source?
Nov 29, 2010I am attempting to pass report parameters to my query. My report's data source is a WCF web service. I can run normal queries fine, but I have found that without the know-how to pass parameters to my query I am limited with my capabilities.
Assume a string parameter named "Name" with a specified default value of "Jmachol90", how would I pass that into the following query at the designated place:
<Query>
<Method Namespace="http://schemas.microsoft.com/sqlserver/masterdataservices/2009/09" Name="SecurityPrincipalsGetRequest">
<Parameters>
<Parameter Name="Criteria" Type="XML">
<DefaultValue>
[code]....
Reporting Services :: Changing Credential Used For SSRS Data Source Programmatically
Jun 15, 2015I am looking command (cmd/powershell/c#) for setting/updating credential for SSRS data source.
View 2 Replies View RelatedReporting Services :: Report Builder 3.0 - View Data Of A Column
May 13, 2015In Report Builder 1.0 you could drag a column to a filter and see the data before select the values for the filter.I can't find a way to do that in report builder 3.0. is it possible to see the data of a column in Report builder or SSRS?
View 3 Replies View RelatedReporting Services :: 64 Bit DSN Not Appearing In Connection Properties Data Source Specification Dropdown Box
Nov 8, 2015As the title states I have a 64bit DSN but when I try to create ODBC datasource in Reporting Services it does not appear in the dropdown box. I have created as a system DSN.
SQLServer 2008R2
Reporting Services 2008
Dynamically Change Initial Catalog In Shared Data Source In Reporting Services?
Oct 30, 2007First off, let me just say that I'm a complete newbie to SQL Reporting Services, and .NET in general. We have a VB 6 application that is trying to launch an SRS 2005 report in a viewer window. This was accomplished by creating A VB.NET "wrapper" window that launches the report, and allows the report to be previewed, exported, etc. I did not write any of this.
The report is using a Shared Data Source, which points to a specific database. My problem is that the users can select which db they want when they launch the VB 6 Application, so I need to find a way to edit the connection string in the report to specify which database to use on the fly. I have the db name in the "wrapper" application, but I can't figure out how to pass it to the report.
thx,
Paul
Reporting Services :: External Assembly Reference Same DB Data Source As Calling Report?
Aug 25, 2015I have a SSRS 2012 report which references a custom c# assembly. This report exists in multiple environments (alpha, beta and production ) which are each associated with different data sources.
Is there a way for the assembly to determine the datasource used by the calling report so it can also connect to it?
Reporting Services :: Sharepoint Dropping Link To Data Source For SSRS Reports
Oct 9, 2008I have published SSRS reports to sharepoint and used the Reporting Services Report viewer to present the reports on a Page. Everything works fine for the day, however in the morning, when I go to view the page, I get an error message
The report server cannot process the report. The data source connection information has been deleted. (rsInvalidDataSourceReference)
Reporting Services :: How To Setup Data-source Credentials With User Running The Report
Jun 2, 2015I want to create a datasource but the credentials I want to use will be based on the user running the report rater than hard coded.
I have tried using Windows Integrated Security but all i can is cant log in as NTAnonymous User?
Reporting Services :: Show Dates Data In Timescale View Using SSRS
Nov 2, 2015I have a requirement to display project start date and finish date in timescale view. The data in database table available as per below -The start date and project finish date should fill color in the timeline view as per below example, by quarters for a current financial year, last year and plus two years a head.
View 6 Replies View RelatedReporting Services :: Refresh SSRS Report As Soon As Its SSAS Cube Data Source Is Processed?
Oct 12, 2015how to trigger report's refresh following its underlying SSAS cubes process?
I want to keep reports data updated at all times, especially when this happens while user is already browsing the report..
I don't want to set an auto refresh for the report every 5 minutes as my cube is processed only one time during the day...
Reporting Services :: Parameter Selection For Users In Sub Report
Aug 9, 2015I have a report with two parameters (@StartDate and @EndDate) to enable users to specify values to customize the data in the report. These two parameters are created within the Dataset. The parameter visibility is set to visible.Opening the report directly works as expected (the user is able to input the date parameters as he wishes and then sees only the data of the specified time period, see image1).Now I want to use this report as a subreport (beeing opened from my main report): But when I open the report within the main report (via action go to report) the parameters are not shown anymore, see image2.Why are the parameters not shown anymore?
-- I'm working with Reporting Services in SharePoint mode using Sql Server 2012, SharePoint 2013.
Reporting Services :: Access Denied Error When Testing Data Source Connection In SSRS 2008
Aug 16, 2011We are running Reporting Services 2008 R2 on a Windows Server 2008 Standard 64-Bit server. I have a user that has full access to Reporting Services at all folder levels but IS NOT a local administrator on the 2008 server.
This user can create data source connections but when he tries to test the connection by clicking on the 'Test Connection' button, he gets the following error "The permissions granted to user <username> are insufficient for performing this operation.A user that has administrator priveleges on the server can test the connection fine.
I don't want to make this user an administrator on the server.
This is an extract from the log file:
ibrary!ReportServer_0-24!3478!08/16/2011-13:45:37:: Call to TestConnectForDataSourceDefinitionAction().
library!ReportServer_0-24!3478!08/16/2011-13:45:37:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: , Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user <username>
are insufficient for performing this operation.;
[code]....