Reporting Services :: Split Function Resulting In Error
Oct 7, 2015
I have a report that is using the following expression for one of the fields:
=Split(Fields!FromAccount.Value, " ")(1)
The format of the number is xxxxx-xxx xxxxxxxxxxxx
So the function is to grab the second section of numbers after the space. The query for this report can bring back 1 to many results which equals one to many pages.
I have an issue where the query returns three results. The first page will display the correct number, the second page displays #Error and the third displays the number.
When I run the query from Management Studio I see the numbers are as follows:
Note the first and and last lines have extra spaces which I thought would be the cause of the problem though I would've expected the #Error to appear on the first and third page rather than the second one.
When I remove the extra space for the first and third number all three pages display their values correctly.
However, there are many, many numbers in the table that have one to two spaces. These numbers are from a spreadsheet that is imported biweekly. So it was either I fix the spreadsheet before every import or I come up with a new expression to check for one or two spaces. This is what I came up with:
Now, the first page displays the number correctly while the second and third page displays with the #Error. Basically I want to say if the value contains two spaces then split at the two spaces otherwise split at the one space.
I am trying to create a column chart that calculates the percentage of computers in our IT environment that are Actively communicating to our SCCM Server.
I have two datasets:
1. Total_Count_Of_AD_PC DataSet.
2. PC_With_Active_SCCM_Clients dataset.
Basically i wan to calculate the percentage for each Region (i.e. AP for Asia Pacific, EMEA, Americas).
Below is the Total_Count_Of_AD_PC Dataset screenshot.
Below is the PC_With_Active_SCCM_Clients dataset.
Below is the expression that i used that is causing the error.
The Y expression for the chart ‘Chart2’ has a scope parameter that is not valid for an aggregate function. The scope parameter must be set to a string constant that is equal to either the name of a containing group, the name of a containing data region, or the name of a dataset.
I am trying to split cells that are merged as part of a grouped report. Am using the right-button menu and pressing "Split Cells" when it appears but it just splits into two parts and not into single cells or rows. When I right-button on one of the parts that came out of the split, I do not get a "Split Cells" to break it down further. Want to be able to split the grouped cells into individual cells or rows and have the rows be different colors. How can I do this?
I have a report that groups a particular dataset by customer, with a page break between each customer. If print this report, it looks great - one page per customer.
What I would like to do is have the report deployed on schedule to a windows file share, one .pdf file per customer. How to parse the output into individual .pdfs (one per customer) instead of a single .pdf containing all customers? I get it if this is not possible.
My current (painful) workaround would be to replicate the report for each potential customer, and set a schedule for each report to deploy sequentially. (Customer 1 at 9:00, Customer 2 at 9:01, etc).
I have a database field which consists of a long string of values with some separator.
Ex: Injection^!@$#Medication
in my report i have to split the string as
Injection Medication
till here i am able to display the results but in addition to that i have to display check box against these values like below
and this string can contain any no of values ex: if we have 4 values are separated within a string then i have to display 4 check boxes against 4 results.
I have the problem of aggregating semi-additive measures correct in higher levels in a matrix control of reporting services. I use the "Microsoft SQL Server Analysis Services" data provider. I have a calculated measure saved in the AS2005 cube which looks like:
In the matrix, I have a 4 level Product Dimension on the rows (4 groups matrix1_level1 ..... matrix1_level4) and the visibility of the groups is toggled by each upper level, so I can drill in the product dimension. I place this measure in the data part of the matrix with (sum(Fields!Net_Sales__kg_.Value)). On the leave level all values ar correct. But on each other level, I see the sum of the sublevels.
After a lot of pain researching, I found that I have to use the "aggregate" function instead of the "sum" function, because aggregate uses the aggregating which comes from the data provider and the "Microsoft SQL Server Analysis Services" data provider is able to do that. Thats all of documentation I found. I have played around with this function, but always when I use it, I get no values on all levels. I tried the "scope" parameter of the aggregat function, nothing changed.
I tried aggreagate(Fields!Net_Sales__kg_.Value, "matrix1_level1"), aggreagate(Fields!Net_Sales__kg_.Value, "SalesCube") (SalesCub is the name of my Dataset in Reporting Services I use), aggreagate(Fields!Net_Sales__kg_.Value, "matrix1") and last but not least aggregate(Fields!Net_Sales__kg_.Value), all is the same, no values.
It seems to me, that the aggragate function returns "Nothing", because than, according to the Online Help, no values will be shown. But according to some blogs and forum entries, the "Microsoft SQL Server Analysis Services (AdomdClient)" Data provider should deal with aggregate. Have I do some special entries in the "Advanced..." Settings of the data provider??
Can someone tell me, what I'm doing wrong, and did someone know a good documentation (with examples) for the aggregate function on the internet. The Help-file doc is very, very poor!!!
I have the problem. I have many Cognos Reports to be converted in Reporting Services. Out of which there are several Ranking Reports. Cognos has inbuilt Rank Function while SSRS does not have. I dont want to do grouping on Database level, rather trying to find a solution in RS. But unfortunately I couldnt find any solution. I sorted the group according to requirement, now only thing left is showing the rank number and limiting top 60 rows only. I tried filters to show TopN, but always gives and error and also tried custom code to show the row number for that group but didn't work.
Anyone has any idea how to overcome this limitation of Reporting Services. One more interesting is when I try to create a field in dataset having IIF and / within.. RS terminates, all unsaved work gone. Sometimes I think Microsoft cannot have a product which is 100% perfact and working.
I have got a sql query and converting a Crystal report to Sql report but struggling on few places.When I created the report I need to have a column where I am struggling to figure out how to add this to the column
"if {Clocked_In} = "Y" then "Yes" else if {This} then "Holiday" else if {Sick} then "Sick" else if {Absent} then "Absent" else "No"
"In Crystal four columns make into one but I am not sure how can I do it in SQL report builder.
I am using the following function to set the time format, however I now need to to add an IF statement into this equation.This is the current expression I am using:
We are constrained to use a model that stores records in a main table and various attributes of the record in a second table. Something like this: main record table CAR, attribute table CAR_DETAILS with CAR_DETAILS have key value pairs like "color" "blue" and "doors" "4".
For reports we need to flatten the one to many nature of this to get CAR and color and doors by using an aggregate function like:
car_id, max(car_detail.value) filtered on car_detail.key = "color", max(car_detail.value) filtered on car_detail.key = "doors".
This works on other tables but the car_detail table (shall we say) appears to store its values as blobs. In any case when we attempt to aggregate we get "The query uses an aggregate function on a large value type expression. Large value type expressions can not be aggregated."
Since we can't change the model, we would need to use another function to change this to a smaller string (or date, these are actually mostly date), but none of the very limited set of functions available seems to work to make this aggregation possible (and there is no "first" or anything else similar).
The list of functions available in Report Model Queries can be found at [URL] .....
How to call a table valued functions from SSRS reports ?
Is there a way to call by selecting Dataset properties> Query >Stored Procedure radio button, If not then why our object type function is visible under this list.
I have designed a CV database with complete CV stored in a TEXT field. There is a keyword search which queries the TEXT field also. The query conditions are defined in T-SQL submitted through an ASP page. There is about 20,000 records now. Now while querying the database for keyword search I am receiving time out errors. Is there any solution other than Index server to rectify this situation. How can I speed up the query execution time. Please advise.
I have a query where I am trying to display the most recent information about travelling method of customers using "t.collection_date". I am struggling to get MAX function working in the query.
SELECT P.id, P.forename, P.surname, P.dob, c.postcode, l.code_des, MAX(t.collection_date) FROM People p, MOT_HIST t, lk_mode_of_travel l, corresp_address c
WHERE p.ID = t.id (+) AND t.mode_of_travel = l.int_code (+) AND p.id = c.entity_id (+)
Create report with SharePoint list. Columns are displaying on the report I used out of the group SUM function and it is group by report. one group total is showing correct total and other groups are showing wrong total and showing too much big value even there is whole column is empty.where value is not in column I am using "-" with IIF function. these columns are calculating by using date difference function between two date columns. these values coming with minus value . so ABS function is also using.
Columns calculation expression:
=IIF(ISNOTHING(Fields!DateCAPackage.Value) OR (ISNOTHING(Fields!Date_CA_Application.Value)) , "-" , CINT(Abs(DateDiff("d",Fields!Date_CA_Application.Value,Fields!DateCAPackage.Value))))
we need the list suppliers in a text box,if it were a parameter, we can do it by =join(parameters!Supplier_ID.Value,",")but if the Supplier Id is a field , join (Fields!Supplier_ID.Value,",") doesnt work!how to achieve this.
We have installed SQL Server 2005 with reporting services.When tried to open getting errors as below: how to avoid such errors See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
ReportServicesConfigUI.WMIProvider.WMIProviderException: A WMI error has occurred and no additional error information is available. ---> System.Runtime.InteropServices.COMException (0x8000000A) at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
I have an SSRS report with several variables, some of which are multi-valued. The main query that feeds the report uses some table value functions. For example, the query looks something like this:
select tv1.a, tv1.b, tv2.x, tv2.y, tbl.m, tbl.n from tableValueFunction1(@MultiValueParam) as tv1 inner join tableValueFunction2(@MultiValueParam) as tv2 on tv1.xxx = tv2.xxx inner join regularTable as tbl on tv1.xxx = tbl.xxx
where tbl.abc in (@MultiValueParam).When I try to run this, I get an error saying that I'm feeding the wrong number of parameters into the table value functions. I've fed multi-valued parameters to stored procedures before and used a splitter function to split out the comma separated values, so I was planning to do the same thing in this scenario. However, this is different. When I look at the query in SQL Profiler, it shows discrete values for the multi value parameter. For example, the same query above looks like this when viewed through the profiler (using 1,2,3 as my multi-value selection):
select tv1.a, tv1.b, tv2.x, tv3.y, tbl.m, tbl.n from tableValueFunction1(1,2,3) as tv1 inner join tableValueFunction2(1,2,3) as tv2 on tv1.xxx = tv2.xxx inner join regularTable as tbl on tv1.xxx = tbl.xxx where tbl.abc in (1,2,3)
In other words, SSRS isn't converting the multi-value parameter to a comma separated string, like it normally does.
I get May 10th! The only thing that changes is the toString. Why are the two values different? I tried with different expressions and the difference arises when i start using Weekday(Today(), somevalue).
The result of Weekday should be independent from regional settings as I am forcing Sunday to be the first day of the week, right?
When i open any reports getting the below error message.An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database.
(rsReportServerDatabaseError)Procedure or function 'CreateSession' expects parameter '@SiteZone', which was not supplied.
I have a report that uses a stored procedure as a dataset.The stored procedure accepts four parameters, which I have defined in the report. works fine in query builder and SSMS.
When I run the report I get an error stating a parameter is missing. I tried deleting parameters and recreating not luck.
We built our prod server [vm] with SQL Server 2008 R2 on Server 2008 R2. It works nicely. Then we made a copy of the VM and renamed it (so our test environment would be IDENTICAL to production). After that, SSRS was broken: I get "HTTP Error 503. The service is unavailable." I can't connect via http, or SSMS.
We have tried:
* Running SSRS config tool (several times)
* Running with/without the IIS Server Role
* Dropping & recreating the SSRS keys
* Recreating the ReportServer database, etc
* Checking all of the accounts, permissions, etc
* Running SQL Repair
* Going through the registry to fix any references to the machine's old name
* Uninstalling, reinstalling SSRS
* Completely uninstalling ALL of the parts of SQL Server 2008 R2, deleting all directories, removing references to SQL Server from the registry, rebooting, reinstalling everything.
None of this has worked. SSRS [R2] is still 503 on our test box.
the SSRS [NT] service seems to run, without error. The Event Viewer doesn't seem to be recording any errors. The SSRS logs say that the default URL is wrong, but we get the same error in Prod, and Prod works fine. The other SQL Logs say something about not being able to contact the service. However, as I said, the [NT] service seems to be working fine.
I'm using Reporting Services 2005 SP1 and wrote some code to render reports server-side. My sample report has few parameters that must be passed so I pass these parameters with code.
byte[] report = rs.Render("PDF", "<DeviceInfo><Toolbar>False</Toolbar></DeviceInfo>", out extension, out mimeType, out encoding, out warnings, out streamID); </My code>
Actually, I have several more parameters but I've checked the collection and all the parameters I want are there and have values. Their names match those found in executionInfo.Parameters. But when I run my code I get the following error on Render():
<Error> "This report requires a default or user-defined value for the report parameter 'pClass'. To run or subscribe to this report, you must provide a parameter value. ---> This report requires a default or user-defined value for the report parameter 'pClass'. To run or subscribe to this report, you must provide a parameter value. ---> This report requires a default or user-defined value for the report parameter 'pClass'. To run or subscribe to this report, you must provide a parameter value." </Error>
I've double-checked and my parameter array does have the problematic parameter, I passed it a value but when I check executionInfo.Parameters I see that it's the only parameter that hasn't been give a default value after calling SetExecutionParameters(). So my parameters do seem to be passed but one seems to refuse getting a value. If I comment out the SetExecutionParameters() line I get, as expected a similar error but on another parameter (first one in the executionInfo.Parameters collection). So I'm left to beleive that the SetExecutionParameters() has some kind of bug as it works for all but one parameter. I've checked casing, spelling, tried passing phony parameters and from what I've seen I should be getting an error when I pass the parameters if I got something wrong.
I recently installed SQL Server 2005 Enterprise on a machine running Server 2003. I have successfully configured Reporting Services (see below for summary of settings) - Used the defaults for the Repor tServer and Report Manager Virtual Directories - Windows Service Identity set to domain user. The domain user is part of the administrator group on the machine and has sysadmin rights to the database - Web Service Identity set to NT AuthorityNetworkService
When I open http://localhost/reports/, I get the following error:
I have check a bunch of forums, but have no success. Any advise would be greatly appreciated!!
Server Error in '/Reports' Application.
Compilation Error Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: CS0016: Could not write to output file 'c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files eports2cbaf422c4330628App_global.asax.th5hkjqv.dll' -- 'The directory name is invalid. '
Source Error:
[No relevant source lines] Source File: Line: 0
Show Detailed Compiler Output:
c:windowssystem32inetsrv> "C:WINDOWSMicrosoft.NETFrameworkv2.0.50727csc.exe" /t:library /utf8output /R:"C:WINDOWSassemblyGAC_32System.Web2.0.0.0__b03f5f7f11d50a3aSystem.Web.dll" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files eports2cbaf422c4330628assemblydl3a890e9c0 068591f_f54cc701ReportingServicesFileShareDeliveryProvider.DLL" /R:"C:WINDOWSassemblyGAC_MSILSystem.Web.Mobile2.0.0.0__b03f5f7f11d50a3aSystem.Web.Mobile.dll" /R:"C:WINDOWSassemblyGAC_32System.Data2.0.0.0__b77a5c561934e089System.Data.dll" /R:"C:WINDOWSassemblyGAC_MSILSystem.Web.Services2.0.0.0__b03f5f7f11d50a3aSystem.Web.Services.dll" /R:"C:WINDOWSassemblyGAC_MSILSystem.Configuration2.0.0.0__b03f5f7f11d50a3aSystem.Configuration.dll" /R:"C:WINDOWSassemblyGAC_32System.EnterpriseServices2.0.0.0__b03f5f7f11d50a3aSystem.EnterpriseServices.dll" /R:"C:WINDOWSassemblyGAC_MSILSystem.IdentityModel3.0.0.0__b77a5c561934e089System.IdentityModel.dll" /R:"C:WINDOWSassemblyGAC_MSILSystem.ServiceModel3.0.0.0__b77a5c561934e089System.ServiceModel.dll" /R:"C:WINDOWSassemblyGAC_MSILSystem2.0.0.0__b77a5c561934e089System.dll" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files eports2cbaf422c4330628assemblydl34a099978 068591f_f54cc701ReportingServicesEmailDeliveryProvider.DLL" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727mscorlib.dll" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files eports2cbaf422c4330628assemblydl3de5a2332 0958a20_f54cc701ReportingServicesWebUserInterface.DLL" /R:"C:WINDOWSassemblyGAC_MSILSystem.Xml2.0.0.0__b77a5c561934e089System.Xml.dll" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files eports2cbaf422c4330628assemblydl3498aee86 042473c_93d0c501ReportingServicesCDOInterop.DLL" /R:"C:WINDOWSassemblyGAC_MSILSystem.Runtime.Serialization3.0.0.0__b77a5c561934e089System.Runtime.Serialization.dll" /R:"C:WINDOWSassemblyGAC_MSILSystem.Drawing2.0.0.0__b03f5f7f11d50a3aSystem.Drawing.dll" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files eports2cbaf422c4330628assemblydl3cd47089b 0f2a80e_f54cc701Microsoft.ReportingServices.Interfaces.DLL" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files eports2cbaf422c4330628assemblydl3f180608d 0083daf_b16dc701Microsoft.ReportingServices.Diagnostics.DLL" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files eports2cbaf422c4330628assemblydl323449648 068591f_f54cc701ReportingServicesNativeClient.DLL" /out:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files eports2cbaf422c4330628App_global.asax.th5hkjqv.dll" /debug- /optimize+ /w:4 /nowarn:1659;1699;1701 "C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files eports2cbaf422c4330628App_global.asax.th5hkjqv.0.cs" "C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files eports2cbaf422c4330628App_global.asax.th5hkjqv.1.cs"
Microsoft (R) Visual C# 2005 Compiler version 8.00.50727.1433 for Microsoft (R) Windows (R) 2005 Framework version 2.0.50727 Copyright (C) Microsoft Corporation 2001-2005. All rights reserved.
error CS0016: Could not write to output file 'c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files eports2cbaf422c4330628App_global.asax.th5hkjqv.dll' -- 'The directory name is invalid. '
Version Information: Microsoft .NET Framework Version:2.0.50727.1433; ASP.NET Version:2.0.50727.1433
I have tried like this. but I cant execute my SP it ended up with errors.
IF (@FirstLetters IS NOT NULL) BEGIN SET @FirstLetter = 'SELECT SplitValue FROM dbo.FnSplitString('+@FirstLetters+','',''))' print @FirstLetter END
SELECT P.PUB_ID AS ''PubId'', P.PUB_TITLE AS ''PubTitle''
FROM HDS_PUBLICATION P INNER JOIN HN_IM_JOIN IM ON IM.PUB_UNID = P.PUB_UNID, HDS_CUSTOM C, WD_PUBLIC_SHELF S, HDS_TOPIC T WHERE P.PUB_UNID = C.PUB_UNID AND C.CUSTOM3 = ''False'' AND P.PUB_ID = S.PUB_ID AND P.PUB_UNID = T.PUB_UNID AND S.Audience = ''Public'' ' + @FilterByLang + ' ANDP.PUB_TITLE LIKE '+ @FirstLetter +'''%''' +'
Is there any split function in sql server 2005. I just want to pass a string to a stored procedure. it should split that string when it encounters a space. for ex, consider the string " the intel mother board" it should give "the,intel,mother,board" as result.
I have some sql results coming out as a string when it is a bunch of numbers separated with a coma. (1,2,3). I need to insert this figures as separate numbers in separate rows into a table in a database. How do I split them and how do I input them. I tried using a loop and it works well in an asp page but I need to do that in sql.
Hi, I am trying to write a stored procedure that takes a comma separated letter. I have a split function that returns the splitted letters. I have select some values from the tables in the database where the title starts with each splitted letter. I thought I should use cursor that contains each letter and in the while loop i put my select statement with the conditions. Is this the correct way. Or are there any ideas for this?
