I have a stacked bar with Line marker. that shows the trend contribution. My concerned is the line marker was behind the stacked bar which it should be at the front or before the stacked bar. how to fixed this in SSRS and Report builder. The line marker is the finished good qty while the 3 other legend WIP, FG and Scrap is the Percentage.
View 12 RepliesI have a stacked bar chart which i notice a vertical line char. how can i removed this vertical line? I already modified the properties under smart labels under calloutlineanchor, calloutlinestyle, calloutstyle to None but still getting this vertical lines. another things is the data label as you can see in the the first column the 1.8% should be place under the gray color but its already shown before the orange color.
View 3 Replies View RelatedI have an existing stacked chart with line graph as secondary. the value of line graph is finished good qty. now i need to removed the finished good and change it with a target line chart. May i know on how to work change this to line. The target value is 68%.
Rec MonthQty ReceivedFinished GoodScrapWIPFG %ScrapWIP %
Jan-20151181336215754353162352.6%46.0%1.4.%
Feb-2015843174884434083139057.9%40.4%1.6.%
Mar-20151115357179537993174764.4%34.1%1.6.%
Apr-20151315319378536096165071.3%27.4%1.3.%
May-20151205567891836410522865.5%30.2%4.3.%
[code]...
Hi,
Two questions both on Line charts:
Is it possible to give the marker of a line chart a different colour from that given to the line?
Is it possible to make only the line in the line chart invisible? My requirement is to keep only the markers.
Regards,
Emil
I have a stacked column with 2 series("phones", "no phones") on the categories, What I am trying to do is to show only one of the series in each category,I used the visibility option in the series properties, and chose show or hide based on an expression using the expression below if(Fields!PENETRATIONSERIES. Value="no phone",FALSE,TRUE) i get no graph , But when I switch the true and false value, the graph show with the two series there.
View 3 Replies View RelatedSample Query :
SELECT 'A' [Type], 1 AS [NUMERATOR] , 2 AS [DENOMINATOR]
UNION ALL
SELECT 'B' [Type], 2 AS [NUMERATOR] , 4 AS [DENOMINATOR]
UNION ALL
SELECT 'C' [Type], 3 AS [NUMERATOR] , 6 AS [DENOMINATOR]
[Code] ...
I need to show the ratios beside each bar (shown in red) as shown in the above diagram.
I need to generate weekly report for data usage for my c drive and d drive.the graph should be likefor a particuluar date, I want to display graph like this. even if I change secondary axis, my c: drive used and free space not coming in single column. it comes like c: drive used space, on top of it d: drive used space and in adjacent column c: drive free space, on top of it d: drive free space.I don't want to add two category one for date and another for driver names.
View 6 Replies View RelatedI have another query regarding the graph/chart that i made in report builder. May i know on how to lessen the space between a column in my stacked bart chart.
View 5 Replies View RelatedI have a report in which I have assigned custom colors with a function to one of my stacked column charts. When I run it in the report builder, the colors are correctly placed, but as soon as I upload the report to the server and view the report from there, the colors get swapped. I have these custom colors applied to other stacked column charts in the report and they work perfectly fine. The only difference between this chart and my other charts is that it contains two category groups.
EDIT: Alright, I have gotten it to display the correct colors by using a function with the colors I wanted in reverse. I have two values, "Upcoming" which is displayed in red, and "Outstanding" which is displayed in blue. If the chart has only upcoming values, it will display in blue rather than red, whereas if I have upcoming and outstanding values, they will display in their correct colors. why this is occurring?
I am using the below expression for hidding the zero data labels in ssrs chart.=IIF(Fields!Name.Value=0,False,True). But this expression is working for some other charts. It is not wrking for only charts. I could not find the solution for that. How to hide the zero values.
View 4 Replies View RelatedData lables in ssrs reports are getting overlapped in stacked chart. Since it is satcked chart i can't place labels outside the bar.Due to this it is not visible clearly. how to avoid this issue?
View 7 Replies View RelatedI need the Trend line for the following data in Line chart they are the following data. The following are the graph are my output and i need the trend line for these Key_gap value.
This is the link [URL] ....
I need the same trend line for the Bar-Chart in SSRS 2005.
In ssrs text box data is coming from database in single line .But actually it is of two different paragraph.so how to break the paragraph data in two different line .
View 8 Replies View RelatedRepresenting an elevation value in a line chart? or (Any chart)
The below are the sample values
GRID_ID StarPoint EndPoint Elevation
3 0 900 1220.1
3 900 1000 1219.5
3 1000 1100 1219.2
3 1100 1300 1220.1
4 0 100 1330.1
4 100 200 1328.1
4 200 300 1329.1
Is there something I can do in layout mode to cause line breaks to only occur when data changes? I am creating a list of students and their degrees, but some students have multiple degrees and some only have one. If I place the information in a table with a blank row for a break, it breaks after every degree, but without the break there are no breaks at all.
Here's what I want:
Student
degree
degree
Student
degree
Student
degree
degree
degree
But what I have is:
Student
degree
degree
Student
degree
Student
degree
degree
degree
Is there any way to fix this, perhaps with an expression of some kind?
I have 10 records seperated by ID. I m using List in SSRS to show data on report. I need to add horizontal line after first record, then after second record till 10 th record. How do we add this line?
View 4 Replies View RelatedIs there a possibility in SSRS to have One stacked bar of cumulative sum of different ID's and and Line Chart at left hand of the Bar which will show the Progress as soon as the ID turn to Competed status.
I have been trying to do this , however there is huge problem of scaling:
The line should be finished at all the completed ID's SUM which is the lowest stack of the Bar.
However , the bar gets stretched to all of the space.
I have tried to place it into Tab lix, But it doesn't work.
We had finished converting a lot of our reports from Crystal Reports to SSRS. Upon doing so, one report, the customer's invoice has comments in the report that contain (s) at then end of a word to indicate singular or plural. Crystal reports handled the wrap correctly and kept the word together including the (s), but in SSRS, the (s) is being wrapped to the next line, which doesn't look good at all.
View 8 Replies View RelatedI have the below chart.
In this, I need to add line charts for the three years specifying the running total. I already have bar charts for the respective years. This is the query that I used to get the dataset.
SELECT [Parent Name], [ID], [Year], [Month], SUM([Value]) AS 'Running Total'
FROM Regulus_Data_Backup
GROUP BY [Parent Name], [ID], [Year], [Month]
order by [Parent Name],[ID], [Year], DATEPART(mm,CAST([Month]+ Convert(varchar(4),[Year]) AS DATETIME))
Then I added a series with a expression that had the chart type as line as shown below.
My Expression was
=RunningValue(Fields!Running_Total.Value,SUM,"MonthWiseData")
My 3 parameter was "MonthWiseData" which is my dataset name. Is this correct? I use the same dataset to get the bar charts too. I get a error message now when loading the report saying "the scope parameter must be set to a string constant.
My goal is to get bar values for 3 years for the 12 months and in the same chart get the cumulative numbers for the 3 years for the 12 months. How can I do this?
I am trying to push the install for ReportBuilder 3.0 and am having an issue with the REPORTSERVERURL option for installing via command line.I have a batch file that works fine, however when I launch the app it does not have a report server configured. I have verified I can connect to my report server if I enter it manually.
View 3 Replies View RelatedI have this issues with empty points in a Line Chart. How to make it work with dynamic values in the series and some dates in the category, how to join the "data" values for a "series"where there are no category value. So far I cannot see any fix that would make it work by joining the data points with the "average" data on a empty point (no category value) and with the same color on the line.
View 2 Replies View RelatedI typically use Report Designer, but I have a new project requiring Report Builder 3.0. In Report Designer (BIDS), I can take more complex expressions (ie SWITCH with 5 or 6 options), and put each pairing on a new line to be able to better read the code.
In the Expression Editor in Report Builder, pressing the ENTER key on my keyboard closes the Expression dialog box and saves the changes.
Is there any way to add line returns in the code to make it more readable? The expression editor wraps when it runs out of room, but this doesn't make it more readable, in some cases, it wraps in the middle of a field name, making it even less readable.
The 2012 version also has this same "feature".
I've created some reports in Reporting Services 2003 and would like to call them up from a .Net 2003 windows based application. I'm passing one parameter to the report and would like to be able to automatically call the Save As... command and provide a path and name to save the file. I wnat to render the report as a PDf file and save it in that format as well. I can generate the name of the file on the fly using the input parameter value.
What I need is a sample of how to instantiate a reporting services object in .Net 2003 and the commands to execute the Save As function after the report has been rendered.
Thanks
The Mad Jammer
I want to add a detail line on a report in visual studio. How can I do it?
View 9 Replies View RelatedWhat is the best optimised options to display the date labels with bi-weekly intervals starting date Date from one month to three months future from the current date?
As per above requirements, I have built the below line graph query and graph, currently it only displays the date labels as per data but I need to display date labels with bi-weekly intervals starting date from one month to three months future from the current date. Also another issue found, if there are few more date labels then does not show all labels on horizontal axis.
Select
/* Set Week End date as Sunday */
DATEADD(DAY, 7 - DATEPART(WEEKDAY, t.TaskBaseline0FinishDate), CAST(t.TaskBaseline0FinishDate
+1 AS DATE)) as[WeekEnd]
,count(t.TaskBaseline0FinishDate) as Baseline
,count(t.TaskFinishDate) as Finish
[Code] .....
draw 4th Polynomial Trend line chart ib SSRS 2012. FYI this feature is in Excel but I want to draw this trend line on my Column Chart.
View 5 Replies View RelatedI have a simple report which includes Dname and Description columns.
In the description column if the value is more then when coming to second line has to be 2 SPACE indent.
Below Image for your reference.
How do I achieve double spacing of lines in a large text box in SSRS?
View 6 Replies View RelatedI am displaying the red line in the beginning of the current week column in the matrix table. But for few resources the red line is missing. For Example in below screenshot, refer the 'Adrian Larkin' resource. Here is the SSRS report border expression which is comparing the [TimeByDay] with the current Week First Monday Date to display the red bar -
=IIf(Fields!TimeByDay.Value = DATEADD("d", -(WeekDay(Today(),2))+1, Today()), "Red", "Black")"
Here is the dataset result set. If you refer the column [TimeByDay], it has no record for the date 11/05/2015 for the Adrian resource as he has no assignment for the date 11-05-2015.display the red missing line red bar using the expression or any other solution.
I want to repeat line on each page of report on PDF while using 2 columns on report. The problem is that if i use table border it will also repeat after second table. i want a line between two tables.
View 14 Replies View RelatedI need to create a chart with the following features
1) Bar chart that has data for 3 years (3 series)
2) Line chart that has the same data as per the above points on the bar chart but this is a running total. (3 series)
3) These data points are for the 12 months
4) there should be a secondary axis for the cumulative one
Can I create this using the same data set?
Hi,
In reporting services simple chart report we can keep markers for line values like square , circle , cross etc..
My question is it possible to keep separate style marker for each line?
Thanks
Shekar Reddy
Hello,
I am trying to migrate my reports from SQL server 2000 reporting services 32bit to 2005 64bit. I am following the migration steps that MS specified.
Restored my Reportserver and ReportserverTempDB databases
Then I was using the configure Report services to upgrade these databases but I always end up getting the follwoing exception when I run the upgrade on the "Database Setup" configuration for 'ReportServerTempDB' database
System.Data.SqlClient.SqlException: Could not locate entry in sysdatabases for database 'ReportServerTempDBTempDB'. No entry found with that name. Make sure that the name is entered correctly.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Common.DBUtils.ApplyScript(String connectionString, String script)
at ReportServicesConfigUI.SqlClientTools.SqlTools.ApplyScript(String connectionString, String script)
It's driving me crazy, why is it looking for 'ReportServerTempDBTempDB' in the catalog instead of 'ReportServerTempDB'?
Is it possible to migrate from 32bit to 64bit?
Any help is appreciated