Reporting Services :: Tabular Report Datasets - Grouping On Column
Jun 23, 2015
I have table which has 5 columns(col1,col2,col3,col4,col5) very simple and some data .
I would like to create a tabular report datasets on the report like shown below with grouping on col1
like
col1 some static text and dynamic text
------------------------
col1 col2 col3 col4
data data data data
------------------------
col1 some static & dynamic text
------------------------
col1 col2 col3 col4
data data data data
------------------------
Note I need to keep all the tables on the same page and when exported in excel they should come on same page sheet.
View 2 Replies
ADVERTISEMENT
Sep 27, 2015
My report has two data sets that hold inventory from two different departments.
ds_DeptA and ds_DeptB
I have a table, that pulls the DeptB status of DeptA record and displays it. This returns empty when the lookup fails to make a match, which is fine. Typically means DeptB does not have the record yet. I need to count these empty (null) feilds and populate it in a Text box outside of the table.
I just can't figure out the syntax with multiple datasets. I can't use the lookup expression as part of the count expression since the count expression is not contained in a table that has a dataset.
table: ds_DeptA
fields:
ID
Name
date_set_to_DeptB
<<Expr>> =Lookup(Fields!ID.Value,Fields!DeptA_ID.Value,Fields!DeptB_Status.Value, "ds_DeptB")
View 3 Replies
View Related
Mar 27, 2012
We have a report that was created in SSRS 2008 R2 that has 3 tables with different datasets that share a common ID that I want to use to group them.
If we run the report passing only a single value for the grouped parameter then the report works perfectly. What we need is for this report to allow multiple values to be selected for this parameter and for the report to run as if the user had selected each value one at a time and run the report with page breaks in between. Currently, when we pass multiple selected values for the grouping parameter the report displays all values for table 1, then all values for table 2, then all values for table three as below:
Table 1:
Detail rows for Group Param Value 1 ...
Detail rows for Group Param Value 2 ...
Detail rows for Group Param Value 3 ...
....
Table 3:
Detail rows for Group Param Value 1 ...
Detail rows for Group Param Value 2 ...
Detail rows for Group Param Value 3 ...
But we want it to render like this:
Table 1:
Detail rows for Group Param Value 1...
Table 2:
Detail rows for Group Param Value 1...
Table 3:
Detail rows for Group Param Value 1...
[code]....
The page breaks are needed so that when the report is exported to excel each individual report (by group param) will be on its own uniquely named tab.The report must export cleanly to excel and currently does for the single value passed.
View 5 Replies
View Related
Jul 31, 2015
Can we build a report like the one shown above . Basically the columns will be on vertical columns and values of the columns will be next to it ? I know there is matirx control but it is for multiple columns .
In business objects we have separate control for this but in ssrs we have 1 table control and another matrix control. I think i need to modify matrix control to achieve it...
View 6 Replies
View Related
Mar 5, 2008
Hi,
I would like to build an SSRS report from two different cubes (SSAS 2005). These cubes are contained in two different SSAS databases.
To do this, i created a dataset for each cube throught MDX expressions.
These datasets use common parameters defined in my report.
Thus, i try to integrate in my report chart datas from the two datasets, but my chart only target one dataset.
Is it possible to create a kind of dataset view to join my two datasets ?
Or is it possible to join the cubes from two different SSAS databases in an MDX expression to put all my datas in a single dataset ?
thx for your help.
Zohir
View 3 Replies
View Related
Jun 21, 2015
I have two different dataset in one Report, Each Dataset result is binded to a different Table component.
When I export as Excel ,I am getting all this in One Excel sheet.
I need this in separate excel, as dataset1 in excel1 and dataset2 in excel2.
View 3 Replies
View Related
Aug 11, 2015
I would like to create a group and add an overall header.
So the dimension is grouped and results in the following:
Group Title
Dimension 1 Dimension 1 Dimension 1 Dimension 1
Instead of :
Group Title Group Title Group Title Group Title
Dimension Dimension Dimension Dimension
How can I achieve this without using a tablix within a tablix?
View 6 Replies
View Related
Aug 31, 2015
I create a matrix,
Row groups: Province
Column groups: Project Type
Values: Count of # of Projects, Sum of Amount ($)
What this displays is the following. How do I go about calculating what's highlighted in yellow? It is Amount of OneProjectType / Amount of TwoProject Type.
View 5 Replies
View Related
Jul 6, 2015
I am working on one of the report. where I need to move the amount across column group.
My data is like this
Project Amount CurrentFiscalMonth DelaybyMonth
A 10 Jul 0
B 20 Aug 2
C 10 Sep 0
Report will be sum up the amount at CurrentFicalMonth grouping on column
But, if the Project is being delayed say by as per the example its 2 months than the amount should be moved from Sep to Oct column for the particular project. User has done it using the Offset function in excel.
Fiscal month starts at July and ends at June. and data source is SSAS cube.
View 4 Replies
View Related
Apr 28, 2015
I want to display data in following format in ssrs report.
Rank Group Value
1 G1 10
2 G1 20
3 G1 30
4 G1 40
1 G2 25
2 G2 54
3 G2 64
I tried row count and other ranking functions but it did not working.
View 3 Replies
View Related
Sep 1, 2015
I want to develop a ssrs report which is grouped by month?
View 4 Replies
View Related
Nov 16, 2015
We are facing problem in doing page break with column grouping. Our column group contains years e.g 2011, 2013 . We want to show a complete page for a year.
Suppose 2011 has 10 records(horizontal) and 2013 has 12 records(horizontal) in column. The output should be 10 records of 2011 in first page, 12 records of 2013 in second page.
We cannot change the report layout to make column to row and vice versa.
View 3 Replies
View Related
Jun 10, 2015
I have a report where in I want to show each record on a separate page.
So, to achieve that I took a single cell from table control, expanded it and used all the controls in that single cell. This looks nice so far.
Now, I also have to show a sub grid on each record. So I took a table control and added on the same single cell and tried to add a parent group to the table row.
When I preview, it throws this error.
"The tablix has a detail member with inner members. Detail members can only contain static inner members."
What am I doing wrong? How can I achieve table grouping inside a table cell?
View 2 Replies
View Related
Jun 10, 2015
I have a requirement where i have to display some data in the form of multi column but the main report should be in a standard one.I have tried by using sub report as multi column and used that in my main report but when i preview the report it is considering it as a normal report.Do we have any feature in SSRS to have both multi & standard report layouts in one report.
View 4 Replies
View Related
May 13, 2015
I am creating a report in SSRS which has the following criteria:
- Row 1 (parent) is 'Product'
- Row 2 (child) is 'Feed'
- Columns are date. I have 5 dates showing at any one time across the top. The date field is set up as a parameter so depending on the date the user selects, the report will show that date on the end column and then the 4 days prior to that in the other columns.
- Data is the number of records.
I have a sub total on the Product and the report is collapsed on Product as default.
What i'm stuck on is trying to insert a column at the very end that will show the variance between the last two dates. So the difference between the date the user selected (@date parameter) and the day before that.
View 6 Replies
View Related
Dec 14, 2012
i just clicked on Advanced mode in Column Group, and then in Row Group Side i set Fixed Data=true for first top static. I'm using local report not server report and i'm displaying that local report in Reportviewer. Now also its not working....
View 6 Replies
View Related
May 15, 2008
Is there a way to dynamically feed the Text of the Column titles into a report at run-time in Reporting Services?
In Access I could use DLookup to pull YTD Dates (e.g. "05/2008") from another view that kept track of the settings for the year being processed (Curr Year, Prior Year, Prior Year II, YTD I, YTD II, and etc. for each Year's data. YTD I and YTD II would read like '07/2008' and '09/2008'. The YTD II value could change as the next month's data became available ('10/2008'). As we switched from year to year (2007, 2008, etc.) all I had to do was update the [tbl Status Flags] table for the next year and all my many reports would reflect the correct headers for the periods in the data. The period could be switched back to prior years at any time by the user in order to view past data. When the year was changed the report headers would have to reflect that. The status flags table would give the setting for each year. Using hard coded titles was too confusing for the user and changing the titles manually was not feasible.
We have moved to SQL Server 2005 and Reporting Services 2005. Besides losing the ability to Change the Data at the top of every page as the Dept, VP Name, Director and etc. changed I also seem to have lost this dynamic column headers ability. I have found a cumbersome workaround for the data at the top of the page, but the only thing I have come up for the columns is to try to create queried parameters to feed those titles (they will be the same throught the report) and to fill those parameters with the queried defaults. I haven't tried it successfully yet, but so far it's looking like that is not how the defaults work.
Hopefully someone out there has a solution. I'd appreciate any help I can get.
View 2 Replies
View Related
Nov 20, 2007
Hello All
Here is my scenario
1. I have to use a ODBC driver which does not support sub query. So I am forced to use two datasets and link them together.
2. I cannot use Sub-Report because the sum from dataset 2 will be used in calculation in Dataset1
3. Also SubReport cannot interact with Main report
4. We Re-created the report in Crystal XI and we can have two datasets, link them and Subreport value can be accessed in Main report
5. We tested Custom method to get this value for every record in Dataset 1 and it is taking too much time.
6. I could not beleive we cannot link two datasets in RS 2005. I like to use RS 2005 but this limitation is forcing us to use Crystal
6. Before we make a decision I thought to post my question here. Is there anyway to link two datasets?
All your help will be greatly appreciated.
View 2 Replies
View Related
Oct 28, 2015
I have one tablix and this tablix has 2 parts(chart and table with numbers). Table with numbers uses Dataset1 and for chart I created another, 2nd dataset. How to get information from second dataset?
View 4 Replies
View Related
Feb 15, 2007
Hi,
I need to compare two datasets on the same server and then display if there is a difference in some fields for the two datasets.How can I do that? Is there an example somewhere that I can use ?
View 2 Replies
View Related
May 8, 2007
I am using SQL Reporting Services 2000.
Is there some way I can connect two datasets? Main issue is that I have to connect two tables from different databases and then display them in a report. Since these tables reside in different databases therefore I have one dataset for each table. While displaying the report I need to join both these datasets and display a report with data from both the tables.
View 1 Replies
View Related
Feb 14, 2008
Will the width property of a column be able to be set at run-time (i.e. ability to set the width of a column to an expression) in SQL Reporting Services 2008? One problem I have seen is the inability to set the width of columns in a report when you you have several columns whose order is determined based on parameters.
Lets say I have 2 columns in a report and two fields from the database which will populate those columns: 1 field that is varchar(5) and one which is varchar(50). If I do not know which column each field will go to until runtime how am I supposed to adjust the column width? Letting the column width be set by an expression would solve everything as I could pass the width in to the report. As it stands now, I would have to set each column's width to accomodate a field of type varchar(50) in order to avoid wrapping of data.
You could say just create 2 reports, one for each case, but what if I had 15 fields? 20?how to dynamically set the width of a column? Will the width of a column be able to be set at run-time in SQL Server Reporting Services 2008 via expression or some other means?
View 39 Replies
View Related
Jan 4, 2012
I've created an SSRS report in Report builder and I'm displaying it in SharePoint 2010. What I would need to do is to sort according to my totals -column. My report structure is as follows:
The first and column second columns are the ID and the name of a customer. There are over 35.000 consolidated customers in the database.
The third column is the column which I would like my report to be sorted upon. It gives the sum (Amount_EUR) of all different productlines sold to the customer.
The fourth column in this report design model is the product groups sold to that customer. There over twenty of product groups visible when Running the report.
This is what my report looks like when finished (you'd have to scroll a lot to the right if I took the whole of the report so I cut only a part of it to be visible):
I tried to add a sorting option from the reports Tablix properties and adding this code as the sorting function:
=SUM(Fields!Amount_EUR.Value)
But I'm getting an error: "A sort expression for the tablix 'Tablix1' includes an aggregate function. Aggregate functions cannot be used in data row sort expressions."
Ok, so no aggregate functions aren't allowed to the sort.
If I just put:
=Fields!Amount_EUR.Value and sort by that from Z to A(biggest to largest) it doesn't have any effect. The report is still sorted alphabetically by the ParentID.
I've also tried some other code bits, but they all seem to be saying that I couldn't put an aggregate function into the sort expression....but my Total -column is already calculated with a Sum -function....
Is it possible sort my report based on that Total -column? If yes, how? I'm using SSRS 2008
View 4 Replies
View Related
Oct 29, 2015
I am creating a Matrix report using SSRS/Visual Studio 2008 as below:
Jan
Feb
March
April
May
June
July
Aug
Sept
Oct
A & B are customers. The values represent sales for each month.I have got most parts in place except the Month are displayed in random order (1,10,2,3,4,5,6 and so on).I have tried the option to create a calculated column with month numbers and change group properties but that did not work.how to get it to sort display as 1,2,3,4,5,6,7,8,9,10.
View 6 Replies
View Related
Mar 29, 2007
I see a Rank function on SQL Server 2005 and this is exactly what I want. I am writing a Reporting Services report on Sql Server 2000 and the Rank function is not available on either software. The following is my data and what I want...
Name Value Rank
A 5 2
B 5 2
C 6 1
D 4 4
E 2 5
F 1 6Any ideas on how to code a rank function on SS 2000 or Reporting Services?
View 5 Replies
View Related
Aug 5, 2015
Struggling to come up with an overall sum for each individual user when using the below code
SELECT
Practice.ibvStaffCategorisation.StaffId
,Practice.ibvStaffTotalsCL2Y.Period
,SUM(Practice.ibvStaffTotalsCL2Y.ChargeableMinutes) AS Sum_ChargeableMinutes
,SUM(Practice.ibvStaffTotalsCL2Y.NonChargeableMinutes) AS Sum_NonChargeableMinutes
[Code] ....
As I am using union all it shows two values for each user, the problem is I am getting the data via lookup like below
=Lookup(Fields!StaffId.Value, Fields!StaffId.Value, Fields!Sum_ChargeableAmount.Value, "ABSTimeRollingY")
I don't think I can use a Sum within a lookup so at the moment it is only bringing through the first value for each user but I would like it to bring through both.
Is there a way to do this within the dataset or via the query in the table?
View 2 Replies
View Related
Aug 26, 2015
I have to create tablix report using data from 2 datasets. The data source for one of the dataset, DataSet1 is Microsoft SQL Server and the data source for the other dataset, DataSet2 is Excel.
I have to pic 3 columns from DataSet1 and one column from DataSet2.
I tried using a lookup function Expression:
=Lookup(Fields!ProgrammerName.Value,Fields!ProgrammerName.Value,Fields!Skill.Value, "DataSet2")
The above expression is throwing #Error on that column in the output.what should I do?
View 5 Replies
View Related
May 13, 2015
In Report Builder 1.0 you could drag a column to a filter and see the data before select the values for the filter.I can't find a way to do that in report builder 3.0. is it possible to see the data of a column in Report builder or SSRS?
View 3 Replies
View Related
Oct 5, 2015
I have to display three months name as column name in ssrs reports. These month column will be dynamically. So i have to display the column dynamically.
View 3 Replies
View Related
Aug 1, 2015
I have a matrix table with row groups of a date and addresses and also a column group which produces 3 columns and values with in these column.I have a "Total" column based on a Count of the column groups which gives a number.How do you hide all rows where the "Total" column is less then 1? There will be results which still needs the date and addresses groups.
View 2 Replies
View Related
Aug 20, 2010
My problem is specific to the ReportViewer control. The report displays correctly in every other way (ssrs server viewer, visual studio preview, visual studio 'Run', etc)The aspx page hosting the control has two controls, the reportviewer control (assembly 10.0.0.0), and a scriptmanager control asyncrendering = 'true' and processingmode = 'remote'.So the columns are not 'always visible' with the reportviewer but they are with every other renderer that i've tried.
The report i'm testing is just a simple table with a couple groupings (built using the wizard). To enable the fixed headers I went to the groupings view and changed the "FixedData" property of the first Static member to true per instructions.
View 6 Replies
View Related
Nov 17, 2015
For my report I am trying to display images that are pulled from a database. Images are from separate records. I have the records I need in a dataset and now I want to set a Table Cell value to the field corresponding to the image. However, the next images/(records) are displayed on the next row (as expected i guess). How do I set the the records/values to be displayed across a single row?
What I have:
image1|
image2|
image3|
What i want:
image1|image2|image3|etc...
View 3 Replies
View Related
May 22, 2015
I am not sure if this is possible or not, we have two datasets and each one has an additional calculated field which breaks the value JobBilledExVAT into three years.
So it reports for example how much we billed in May 2015, 2014 and 2013.
I have got the table to display this when reporting on one dataset by grouping by year
The datasets both look similar to this
SELECT
Practice.ibvSalesByJob.JobBilledExVAT
,Practice.ibvSalesByJob.[Year]
FROM
Practice.ibvSalesByJob
INNER JOIN Practice.idvJobType
[Code] ...
The calculated field is
=Switch(Fields!Year.Value = Parameters!Year.Value ,"15", Fields!Year.Value = Parameters!Pre1Year.Value ,"14", Fields!Year.Value = Parameters!Pre2Year.Value ,"13")
The field I am looking to add together is below
=Sum(Fields!JobBilledExVAT.Value)
If I do the below on the dataset associated with the matrix it displays the sum for each year correctly, I would however like to add the Sum(Fields!JobBilledExVAT.Value) from a different dataset (ABS1M) for the relevant year.
I tried this
=Sum(Fields!JobBilledExVAT.Value) + Sum(Fields!JobBilledExVAT.Value, "ABS1M")
However this adds 2015, 14 and 13 from ABS1M and doesn't add them individually if that makes sense? With the calculated field it only shows Year under the main dataset heading not 15, 14 and 13 separately.
I was think of using LOOKUP however I don't know how this would work as 15, 14 and 13 are not displayed under the dataset.
View 5 Replies
View Related
