Can we build a report like the one shown above . Basically the columns will be on vertical columns and values of the columns will be next to it ? I know there is matirx control but it is for multiple columns .
In business objects we have separate control for this but in ssrs we have 1 table control and another matrix control. I think i need to modify matrix control to achieve it...
I'm somewhat new to report builder and have been trying to recreate a report previously created in an Excel Pivot Table. I'm encountering an issue arranging the data the way it's arranged in Excel.
Specifically, I would like the values column to precede an additional column.
Until I can post pictures I'll have to try and mock it:
COLUMNS
Values
Results (my data I want as a 2nd column)
I can't figure out how to get report builder to do it the same way. Whenever I add the 'Result' data as a column it always appears on top. I'm guessing what I need to do is somehow get result set as a child of the first Static group, but I'm unsure how to do that.
I have table which has 5 columns(col1,col2,col3,col4,col5) very simple and some data .
I would like to create a tabular report datasets on the report like shown below with grouping on col1
like
col1 some static text and dynamic text
------------------------
col1 col2 col3 col4
data data data data
------------------------
col1 some static & dynamic text
------------------------
col1 col2 col3 col4
data data data data
------------------------
Note I need to keep all the tables on the same page and when exported in excel they should come on same page sheet.
I have a situation in SSRS to get the common values between the two columns where the values are sorted comma separated as below.Ex:
ColumnA : abc,cde,efg
ColumnB : cde,xyz,abc
the result in
ColumnC : cde,abc
similarly Column A and B will have n number records. I need to right an expression or the Code function to get the required result in ColumnC. I am using SharePoint Lists as Datasource. Cannot write SQL query to achieve this requirement.
I want to repeat line on each page of report on PDF while using 2 columns on report. The problem is that if i use table border it will also repeat after second table. i want a line between two tables.
View 14 Replies View RelatedI have embedded a subreport in the detail section of my report. When I view the subreport in page preview mode it renders with three columns, but when it is rendered w/in the main report in page preview mode the 3 column layout is rendered as a single verticle column.
I've defined the columns in the Body/Columns. I have also set the report inteactivesize and pagesize heights in an attempt to remedy the issue. Margins are set to 0.
Any help is appreciated.
I have a Chart report which is larger than the PDF width, is it possible to make it vertical to fit the PDF size ?
View 7 Replies View RelatedI'm putting Interval 50 and Maximum 100 in Vertical Axis Property but by default 0 is coming. I unchecked mark of Always include Zero Box and Minimum is Auto. But still I'm getting 0 in Vertical Axis Chart in SSRS.
View 7 Replies View RelatedI have a dataset with rows that I normally would display in a table control. I have too many columns and I would like each data row to be display on many lines. How is that possible?
View 4 Replies View RelatedHow do I suppress duplicate values from being displayed on a report data region? Is there an option to suppress duplicates and where is it?
Hi all,
Currently, I am using the SSRS 2005 and try to toggle the report columns similar to Excel's column grouping function. Users can expand "+" / collapse "-" the columns in the render excel report. It works fine when I excute the tabular report in the web yet the toggle function is missing when I render the report to an Excel report. I am not sure the toggle function will only work for the row items or both as the excel report can keep the toggle function for the row items. Please help.
I need to sort my tablix report where I have several calculated columns like:
=ReportItems!Textbox47.value+ReportItems!Textbox48.value..
Now I would like to sort these by using the Interactive sort functions - but I have seen elsewhere that this is not possible..(I'm also getting an error when trying..)Is there not a way that I can bypass this (using Code function or similar) ? The datasource for the data is a OLAP cube
I would like to know how does subreport accept multi value, and how should i modify my expression so that the sub report will display correctly.
My main report will pass dynamic number of account number to sub report, it depends on how many account number a person has. I have my sub report parameter Data Type set as "Allow multiple values" and the visibility is "Visible".
Currently, I am using the following expression to try to pass multi value from main report to sub report. I had tested the result of that expression. It is showing the following result when there are 3 account numbers to pass to sub report.
1534896
1563498
1593548
With that expression, when only one account no is pass from main report to sub report, the sub report will display the result. But when more than one account numbers are passing over, the sub report display nothing, it is blank.
--expression
=Join(LookupSet(Fields!PersonNo.Value,Fields!PersonNo.Value,Fields!AccountNo.Value,
"accounts"),""
+ VBCRLF)
*Note: I cannot put the account number into a multivalue parameter in the main report and pass from that parameter to sub report. I know this will workd BUT I had tried that by setting the default value in the multivalue parameter to the dataset that consists of the account number. That involves 100 thousand plus plus account numbers and it will for sure over the limit of 8000 characters.
When I tried to create a bar chart using SSRS 2012, the vertical axis values are repeating for smaller data sets values. It's only happening when the data labels are below 5, when the data is above 5 this chart represents data fine.
I tried specifying the custom intervals and this option all together eliminated the bar for value 1, instead it only showed the value 1 as text on the chart.
I tried changing the data interval type as number and the data type is of Integer, these are counts which I am showing in the chart.
We are planning to develop weekly report in SSRS.For this we wants each day as column & some expenses[Numeric figure in row]we have dataset like
day
exp1
exp2
exp3
17/05/2015
120
150
650
[code]....
There are some other filters are there that i have applied in my report tablix property.
I want to develop a ssrs report which is grouped by month?
View 4 Replies View RelatedI have created the matrix report which has dynamic column, it grow columns(18) based on the 'MCU' field in PRD.MI table. I have added the 'MCU'(A,B,C,D,E,F,G,H,...Q) on 'Columns' in matrix table, to create matrix report and I have added 'mcst' on 'Data' in matrix table and I have added the 'msp2' on 'Rows' in matrix table. I have created new column after row and I added USP2DS.Final output is as given below.I need the split the matrix column per page.
I have added the 'MCU' on "Column group and 'msp2' on Row group.
Query:
select mi.*, SUBSTR(SM.USP2DS,6,9)AS DESC from
(SELECT a.mcu , a.msp2, SUM(a.mcst) AS Cost
FROM PRD.MI as A
WHERE a.myr=2015 and a.mpr=7
GROUP BY a.MCU, a.msp2
order by a.mcu, a.msp2 ) mi,
(SELECT DISTINCT U_SP2, USP2DS FROM UM.SM) SM
WHERE A.MSP2=SM.USP2
ORDER BY MCU,msp2
I have tried the below post, but I am not able achieve my output. [URL] ....
I have a report with a subscription enabled and the default values that are selected for the report frequently change. I have our report server locked down so that the users can't change the defaults, but I now want to empower them to maintain this on their own. Here is my dilemma. When you have the available parameters set up to pull from a query, the defaults on the report server have to be keyed in manually, which is not an option. The only way to get a check box there, is to explicitly specify the available values.I need my available values to be database driven and I need to be able to select my defaults on the report server using check boxes.
View 5 Replies View RelatedI am creating a SSRS report using a SSAS cube as it data source. The user would like to select multiple values from a reporting parameter that is then used as a filter on the MDX statement. I am bale to have the report work successfully when only one value is selected but not when multiple values are selected; the report uses only the first value from the reporting parameter when it contains multiple values. How do I filter an MDX query using a SSRS report parameter with multiple values?
View 3 Replies View RelatedBased on a table like below I have created a report so that I can compare number of items in the main warehouse (LOCATION1) and the outlets (LOCATION2 and LOCATION3).
___________________________________
| ID | PRODUCT_INDEX | LOCATION | VALUE |
___________________________________
| 1 | INDEX1 | LOCATION1 | 1 |
___________________________________
| 2 | INDEX1 | LOCATION2 | 1 |
___________________________________
| 3 | INDEX1 | LOCATION3 | 0 |
___________________________________
| 4 | INDEX2 | LOCATION1 | 0 |
___________________________________
| 5 | INDEX2 | LOCATION2 | 0 |
___________________________________
| 6 | INDEX2 | LOCATION3 | 1 |
___________________________________
| 7 | INDEX3 | LOCATION1 | 1 |
___________________________________
| 8 | INDEX3 | LOCATION2 | 0 |
___________________________________
| 9 | INDEX3 | LOCATION3 | 1 |
___________________________________
The way I present data in my Report is as such. I want to show items that are available in the warehouse that should be moved to the outlets.
select
a.PRODUCT_INDEX
, a.LOCATION1(VALUE)
, b.LOCATION2(VALUE)
, c.LOCATION3(VALUE)
from
[Code] .....
__________________________________________________________________
| PRODUCT_INDEX | LOCATION1 (VALUE) | LOCATION2 (VALUE) | LOCATION3 (VALUE)|
__________________________________________________________________
| INDEX1 | 0 | 1 | 0 |
__________________________________________________________________
| INDEX2 | 1 | 0 | 1 |
__________________________________________________________________
| INDEX3 | 1 | 0 | 1 |
__________________________________________________________________
I have added some parameters in my report to filter out products that are not available in warehouse (LOCATION1) and this works great.
select * from VIEW where 'LOCATION1(VALUE)' > 0 and ('LOCATION2(VALUE)' = 0 or 'LOCATION3(VALUE)' = 0)
__________________________________________________________________
| PRODUCT_INDEX | LOCATION1 (VALUE) | LOCATION2 (VALUE) | LOCATION3 (VALUE)|
__________________________________________________________________
| INDEX1 | 1 | 1 | 0 |
__________________________________________________________________
| INDEX3 | 1 | 0 | 1 |
__________________________________________________________________
Now the issue starts when I add a parameter to my report for user to choose which outlets (LOCATIONs) he wants in the equation. I know how to make a column disappear based on parameter value but how to take it out of equation? At the moment when user selects only LOCATION2 and not LOCATION3 then data is not filtered correctly:
__________________________________________________
| JOIN_ON_VALUES | LOCATION1 (VALUE) | LOCATION2 (VALUE) |
__________________________________________________
| INDEX1 | 1 | 1 |
__________________________________________________
| INDEX3 | 1 | 0 |
__________________________________________________
Ideally I would like a user to select random outlets (warehouse would be static on the report) and compare one or multiple and only show records that are 0 in the outlets.
I am creating matrix report with grouping on WEEK and Fiscalyearweek,I need to calculate of difference between FY14W01,FY15W01 ande percentage of those..how to calculate in ssrs level.
View 13 Replies View RelatedI'm struggling with trying to display a single vertical stripline at a date value along my x-axis.
I'm using the following non-default settings within the stripline editor:
bordercolor = tomato
borderstyle = solid
borderwidth = 1pt
intervaloffset = Fields!uidate.Value.ToOADate()
where uidate is a calculated field in my dataset that always has the value of 05/29/2012 (using formatdatetime("05/29/2012",dateformat.ShortDate))
Everything else is set to Auto, with stripwidth=0
I'm trying to display a single vertical line at the x-axis value of 05/29/2012
I have previously tried setting the interval offset to "05/29/2012" but that didn't work. I've also tried setting the value of a hidden text box on the report to "05/29/2012" and setting the interval offset to the value of that text box, but that gave me a "text box not declared" error.
How I can simply display a vertical stripline on my line graph at the x-axis value of 05/29/2012 ?
There is a multi value parameter called "include" in the report where "Allow Multiple Values" is checked and it has 4 Available values as shown in the attached screen shots and preview of the report is also shown .There is no data set for this parameter and the values will get displayed on the report based on the visibility condition set in the report.Example : If first value is selected then 1 is passed and based on the visibility condition set in the report - the report output is displayed.None is default value and has value 4 and when the report is run with this option i.e. "None" then rest three parameter values are not applicable .
Requirement :
-When the end user selects (Select All) Check box then (None)
-check box must be disabled or must not appear for selection for the end user
-When the end user selects check boxes either of the first three except None then also None check box must be disabled or must not appear for -selection for the end user
-when the end user selects a combination of first three then also None check box must be disabled or must not appear for selection for the end user
-The None is set as default with a value as 4 and is applicable only when the user does not select either of the first three values and the report will run.
I run these stored procedure to build the report and I am able successfully to build the report but I need some prompts to in the report to get the specific data .
ALTER
PROCEDURE [dbo].[Sharepoint_Ticket_Report]
@StartDate
DATETIME,
@EndDate
[Code] ....
And for prompts how to create created_by and message_type dropdowns as shown in picture.
I have a QA Deployment Date field that is being returned in a custom report I created. I also found a sample date range parameter:
What I want to accomplish:
I want to select a From and To Date and filter the report to only display the rows that have the QA Deployment Date within the selected range.
For example.. I want to select From Date (8/1/2105) and To Date (8/31/2015) and I only want to return only the results that have a QA Deployment date between that selected range.
I am SSRS user, We have a .net UI from where we want to pass multi select values, but these values are comma separated in the database. how can I write a sql query such that when I select multi values on my UI, the comma separated values are take care of.
View 5 Replies View RelatedI think I've seen a similar post on a blog or on the forums - but it seems like this should be possible -
I have an MDX query - that works fine in SQL Enterprise Manager, and has my dimension members on columns, and my measures on the rows. When I try the same query in Reporting Services, I get the error:
"The query cannot be prepared: The query must have at least one axis. The first axis of the query should not have multiple hierarchies, nor should it reference any dimension other than the Measures dimension..
Parameter name: mdx (MDXQueryGenerator)"
Although it works when you pivot the view, I really need my data presented with the members on the columns and the measures on the rows. Another forum post mentioned using the SQL 9.0 driver, but I can't see this listed anywhere (the only one I see is the .NET framework Data Provider for Microsoft Analysis Services).
Here's what my query looks like -
SELECT
{ [Time].[Month].&[2006-09-01T00:00:00] ,
[Time].[Month].&[2006-10-01T00:00:00],
[Time].[Month].&[2006-11-01T00:00:00],
[Time].[Month].&[2006-12-01T00:00:00]
} on COLUMNS,
{
[Measures].[Unique Users],
[Measures].[UU Pct 1],
[Measures].[UU Pct 2],
} ON ROWS
FROM [Cube]
Any ideas?
Thanks,
Arjun
I just created a report builder. I have a main report and i wanted to create a sub report. why i cant or i cant view the path or the folder of my .rdl file to be use as my sub report.
View 5 Replies View RelatedHi There,
Our DBA has installed reporting services on a server and now in order to access the report manager, one has to be an Admin on that Server. I am guessing that there is a mistake in the configuration of Reporting Services. Usually it should allow anybody who was added to the roles in the properties section of the Report Manager, right? I have also added the users to the DB..
Also I am using Windows Authentication to access Report Catalog items (Reporting Services is installed on Server2) from a web Application(deployed on Server1) and displaying the report using report viewer. For some reason, server1 has to be in an Admin role on Server2 to access the report catalog/report. This is kinda strange for me as I don't want everybody to be an Admin on Server2. Can anybody please point in the right direction?
Thanks.
Is there any way to get the report toolbar using SOAP Api in SSRS reporting.
View 6 Replies View RelatedWe have SharePoint list which has, say, two columns. Column A and Column B.
Column A can have three values - red, blue & green.
Column B can have four values - pen, marker, pencil & highlighter.
A typical view of list can be:
Column A - Column B
red - pen
red - pencil
red - highlighter
blue - marker
blue - pencil
green - pen
green - highlighter
red - pen
blue - pencil
blue - highlighter
blue - pencil
We are looking to create a report from SharePoint List using SSRS which has following view:
red blue green
pen 2 0 1
marker 0 1 0
pencil 1 3 0
highlighter 1 1 1
We tried Sum but not able to display in single row.
I have done the following and a domain user would not access report created a login to the SQL server to the user (this SQL Server is where data source DB is)went to site setting in Report Manager and made this use a system userright clicked on report folder and made this user in the browser roleeven checked that in the report in question, the user is already in the browser role Still the user would not access the report! "User .......... does not have required permission" is the error message I am getting.
View 6 Replies View RelatedI have written a report visual studio. The report has 10 multi-value parameters that pull data from their individual data sets within the reports. When running the report from within Visual Studio it renders fine. There are no errors reported, only a warning related to a pathname I have use to retrieve image data and display on the report.Deployment of the report is error free.When I view the report I briefly get the "Loading" splash window, but then nothing. None of the headers or static text is displayed. The results window is blank.
The report defaults all the parameter values. In trying to debug the issue I have found by reducing the number of parameter values the report will render. Once I have all the values added, the report does nothing.Below is the query being used for the report. The where clause in the query shows the parameters being used and the syntax.We are running on Windows Server 2008 R2 and SQL Server 2008 R2.
Ralph
SELECT RTRIM(a.ITEMNMBR) AS Style, RTRIM(a.ITEMDESC) AS Description, a.ITMSHNAM AS UPC, c.LOCNCODE AS Store, d.LISTPRCE AS ListPrice, a.CURRCOST AS Cost,
a.USCATVLS_1 AS [Main Category], a.USCATVLS_2 AS Market, a.USCATVLS_3 AS [Alternate Retail], a.USCATVLS_4 AS Country, b.ITEMXTRAS_1_Type AS Type,
b.ITEMXTRAS_2_Finish AS Finish, b.ITEMXTRAS_3_SubCategory AS SubCategory, b.ITEMXTRAS_4_Department AS Department,
[code]...