I have Configured Configuration settings properly ,
I have did the sMTP settings correctly and I am able to send a mail from db(using send mail task).
I have facing this error since a long while configure the subscription in the ssrs report.
Error: Failure sending mail: The transport failed to connect to the server.
Due to this I am not able to send the subscription in the report..
I am trying to create subscription on report manager.
Getting this error: "Failure sending mail: The transport failed to connect to the server. ".
how to resolve this..
I have a web page that contains a ReportViewer control. I am trying to display a report, which is an .rdl file located on the SSRS server, in this Report Viewer control. I have set the ReportPath and ReportServerUrl correctly. I am getting an error message.Am I suppose to use an .rdlc file rather than a .rdl file? Does the web server configuration need to use a certain account? I am getting the following error message:The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version.
View 4 Replies View RelatedI have created multiple data sources and datasets in my SSrS project. I created the datasets so I could use them as the basis for reports. However, when I open the wizard to create a new report, I am always asked for a data source, and then have to renter the SQL code that I have stored in one of my datasets. How can I have a report use an existing dataset as it source of data? Otherwise, the datasets I created seem useless . . .
View 5 Replies View Related
I have installed 2005 in a new machine with reporting services and configured the reporting services fine. I see the virtual directories fine in IIS but when I try connecting to the report server using IE (http://localhost/reports or http://servername/reports) i get page cannot be displayed errro. When I try connecting using management studio I get the following error
TITLE: Connect to Server
------------------------------
Cannot connect to BLRPTSQL03T.
------------------------------
ADDITIONAL INFORMATION:
The underlying connection was closed: An unexpected error occurred on a receive. (Microsoft.SqlServer.Management.UI.RSClient)
------------------------------
Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. (System)
------------------------------
An existing connection was forcibly closed by the remote host (System)
------------------------------
BUTTONS:
OK
------------------------------
I donot see any errors in the event logs or the report server logs. Any help with this issue greatly appreciated
I was able to build and Preview the report, but ran into an issue when trying to deploy the report that I created. After reviewing various postings on this issue, I still can't seem to get past the issue.
Currently running SQL 2014 Developer Edition, SQL Server Data Tools for VS 2013, and O/S Windows 8.1 all on the laptop. I followed the video and left the default value of LocalHostReportServer. System said LocalhostReport Server could not be found.
I went to SQL Configuration Manager and tried using the Logon as the URL. Still received the same error.
I went to Reporting Services Configuration Manager and used the URL, still received the same error.
I work in an environment where everyone is there own server. I can connect to a collegeau's SQL Server by using the Windows Authentication method in the Database Engine but if I try to connect to the Reporting Services Engine it says that I am not allowed to connect due to permission violations. How do I get adequate permissions to do so? I have all of the components for Reporting Services installed and I am actively using it. I want to be able to test the functionality of the RSScriptor before deploying it out to others.
View 2 Replies View RelatedHi,
I'm getting the following error message when I want to connect to reporting services through SQL Server Management Studio. I have also check the reporting services configurations manager for any issues but still can't connect. The http://localhost/reportserver also is down. I also checked if ASPNET account belongs to the Reporting Services security settings and it does. IIS is up and running.
I'm running SQL 2005 Enterprise 64bit with Service Pack 2.
===================================
Cannot connect to ctbbcysql02.
===================================
The request failed with HTTP status 503: Service Unavailable. (Microsoft.SqlServer.Management.UI.RSClient)
------------------------------
Program Location:
at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.SqlServer.Management.UI.RSClient.RSClientConnection.CreateConnection(String connectionString)
at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.CreateConnectionObject()
at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.RSTypeImpl.GetConnectionObject(UIConnectionInfo ci)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.RSType.GetConnectionObject(UIConnectionInfo ci)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
Any help will be greatly appreciated.
Regards,
Ruaan
When I try to connect to the Reporting Services using Microsoft SQL Server Management Studio, the following error message propmpts up:
_____________________________________________________________
ADDITIONAL INFORMATION:
The request failed with HTTP status 401: Unauthorized. (Microsoft.SqlServer.Management.UI.RSClient)
_____________________________________________________________
Is there any settings that I need to do in the "Reporting Services Configuration Manager" ?
Thanks.
Best regards,
Michael Wu
Hi,
View 8 Replies View RelatedCurrently we are using Custom Delivery Extension for SSRS 2008R2 We are planning to move it SSRS2012
My Question is: Whether we can use the same Code used for SSRS2008R2 to SSRS2012?
if not what code changes we should do?
I have an acctest server (XX-ATS-ASSHP102) running SSRS, SQL DB Engine & SSAS. I'm trying to configure NATIVE SQL Reporting Services to use a data source with Windows Integrated mode towards a SSAS cube on the same server. When I use the servername (or 127.0.0.1) it works perfectly. But when I use the DNS name bidb.acctest.internal it fails with the error "The connection either timed out or was lost.". The profiler on SSAS says "anonymous login" so the Kerberos login is broken at some point.The weird thing is that this works perfectly in production environment, but I've missed something in the ACCTEST environment.The SPN for the serviceaccount running SSAS has correctect SPN:s:
MSOLAPSvc.3/bidb.acctest.internal
MSOLAPSvc.3/bidb.acctest.internal:MSSQLSERVER
MSOLAPSvc.3/XX-ATS-ASSHP102
MSOLAPSvc.3/XX-ATS-ASSHP102.XX.XXXXXXXXXXX.net
MSOLAPSvc.3/XX-ATS-ASSHP102.XX.XXXXXXXXXXX.net:MSSQLSERVER
MSOLAPSvc.3/XX-ATS-ASSHP102:MSSQLSERVER
The SSRS account has delegation with "any service". No account has the "sensitive" flag.DNS names are A-records, except the hostname for the SSRS site which is a c-name, but it's identical in production.The "impersonate client after login" and "replace token" permissions are correct in the policy.The rsreportserver.config says:
<Authentication>
<AuthenticationTypes>
<RSWindowsNTLM/>
</AuthenticationTypes>
<RSWindowsExtendedProtectionLevel>Off</RSWindowsExtendedProtectionLevel>
<RSWindowsExtendedProtectionScenario>Proxy</RSWindowsExtendedProtectionScenario>
<EnableAuthPersistence>true</EnableAuthPersistence>
</Authentication>
both in production and in acctest env..
SQL Server 2008, Tempdb ("ReportServerTempDB")of the report server is growing enormously over 20gb in 3 days. All our reports drive from stored procedures which is a different server from Reportservertempdb. We have no report subscriptions.
We store no snapshots. All we do is run the reports.
I don't know where I start to investigate the issue.
after installing SQL Server 2008 R2 and the Reporting Services, I've managed to access the Report Manager URL....Reports through the web browser on the machine itself. But if i am trying to connect to on my client browser it does not find the Report Server.Do I need to configure the server in any way? Do I need to configure the firewall?
View 2 Replies View RelatedI am setting up sharepoint and sql server integration environment. I am considering the following topology: PowerPivot for SharePoint 2013 and Reporting Services in SharePoint mode Two Server Deployment
[URL]
I am looking to follow the topology example by the letter, which involves installing PowerPivot for SharePoint (aka SSAS in SharePoint mode) in the same server as my SQL, and installing SSRS in SharePoint (SP) integrated mode in the same server as SharePoint.
I understand, however, that if I wanted to install SSRS in SP mode in the same server as SQL, I could but only if the server contains the SP Object Model.
My first question is, what would involve having the SP Object Model in the SQL Server?
Would only installing SP binaries be enough; or Do I need to do a minimal install of SP in the SQL server enough for it to joing the SP farm? And most importantly, what would be the licensing implications for SP in case I want proceed down this route and have SSRS in SharePoint mode installed in the same server as the SQL?
I have created a ssrs report using ssrs-2012 that contains 2 tables 2 pie charts and 1 line chart. But I am unable to see 2 pie charts and and 1 line chart after deploying the rdl in sharepoint server.
Why I am not able to see those charts, or sharepoint server will not support charts at all.
Is there any way to get the report toolbar using SOAP Api in SSRS reporting.
View 6 Replies View RelatedWe've got a requirement to build the real time report. user can browse report at any point of time and need to see the latest data(stock market) in the report.
I've few options down...
1. Directly point to OLTP database as source and write stored procedure to show result set.
2. Replicate the database and write the SP's to reports. To avoid pointing directly to OLTP db.
3. To build the datawarehouse with dim & facts to show it in reports. I prefer this as a standard method, but this would have some latency depending on trasaction load which will differ from the requirement.
We built our prod server [vm] with SQL Server 2008 R2 on Server 2008 R2. It works nicely. Then we made a copy of the VM and renamed it (so our test environment would be IDENTICAL to production). After that, SSRS was broken: I get "HTTP Error 503. The service is unavailable." I can't connect via http, or SSMS.
We have tried:
* Running SSRS config tool (several times)
* Running with/without the IIS Server Role
* Dropping & recreating the SSRS keys
* Recreating the ReportServer database, etc
* Checking all of the accounts, permissions, etc
* Running SQL Repair
* Going through the registry to fix any references to the machine's old name
* Uninstalling, reinstalling SSRS
* Completely uninstalling ALL of the parts of SQL Server 2008 R2, deleting all directories, removing references to SQL Server from the registry, rebooting, reinstalling everything.
None of this has worked. SSRS [R2] is still 503 on our test box.
the SSRS [NT] service seems to run, without error. The Event Viewer doesn't seem to be recording any errors. The SSRS logs say that the default URL is wrong, but we get the same error in Prod, and Prod works fine. The other SQL Logs say something about not being able to contact the service. However, as I said, the [NT] service seems to be working fine.
our IT guy installed Reporting Services on our test server, but the problem is that I cannot not connect to it. It says the the report services instance coundt not be found. Am I correct in saying that report services needs its own instance?? Cause when I put it on my local computer I gave it its own instance and theres no problems there
View 2 Replies View RelatedI have installed 2005 in a new machine with reporting services and configured the reporting services fine. I see the virtual directories fine in IIS but when I try connecting to the report server using IE (http://localhost/reports or http://servername/reports) i get page cannot be displayed errro. When I try connecting using management studio I get the following error
TITLE: Connect to Server
------------------------------
Cannot connect to BLRPTSQL03T.
------------------------------
ADDITIONAL INFORMATION:
The underlying connection was closed: An unexpected error occurred on a receive. (Microsoft.SqlServer.Management.UI.RSClient)
------------------------------
Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. (System)
------------------------------
An existing connection was forcibly closed by the remote host (System)
------------------------------
BUTTONS:
OK
------------------------------
I donot see any errors in the event logs or the report server logs. Any help with this issue greatly appreciated
I'm getting the following message when I try to connect to Reporting Services. 'The Report Services Instance could not be found'.
Report Services was installed separetly from the Database engine install. I see a reference in the documentation that Reporting Services has to be installed concurrntly with the Database engine. There are also to reporting databases installed. Assuming that this is the problem, is there a way to create the databases and connect to them without uninstalling and reinstalling the components. I've tried using the Database setup in the Reporting Services Configuration utility without success.
Thans,
Tom
Hey everyone...I'm completely new to SQL Server and I'm trying to learn the Reporting Services tool. I just installed SQL Server 2005 and selected to install all the options, atleast I'm 99.99% sure I did.
When I go to launch Report Services Configuration, I get "No report servers were found on the specified machine. Details: Invalid namespace". Do I need IIS for this to work?
Also, I do not think the AdventureWorks database was installed, I cannot seem to find it anywhere. I have tried to go back through and reinstall it, but it says that it is already installed.
Also, is there a certain order that you are supposed to install things? i.e. SQL Server before Visual Studios?
Thanks in advance.
*Edit* BTW, I'm using Windows XP, SQL Server Enterprise Edition, and VS.NET 2005.
Is it possible to have my pop up SSRS box size according to the size of the returned value? Issue is, i have a text box that returns a note field and depending on the number of notes, it can and will vary in size. I am currently using this code
="javascript:void window.open(" &"'"& Globals!ReportServerUrl &"/Pages/ReportViewer.aspx?"
&Globals!ReportFolder &"/Patient%20Eligibility&rc:Parameters=False&rc:Toolbar=False
&VPATIENTPROFILEID="& Fields!PatientProfileID.Value
&"
','DetailsWindow','left=300,top=180,width=920,height=455,status=no,menubar=no,scrollbars=yes,location=no'" &
")"
Hi,
I'm having problems navigating from one report to another one if the second report has a multi-valued report parameter. When I navigate to the second report, I don't pass any parameters, but I get an error "parameter is missing a value" for the multi-valued report parameter. I have it setup as allow "multi-value" and "blank value". Any idea what the issue might be?
Thanks.
I have a report which works fine with visual studio but when i uploaded the same into report server and tries to access it through IE or chrome or anything its dam slow.
how to get rid of this issue?
All,
While trying to access the Reporting Services in Mng studio.I receive the following error
Cannot Connect To ServerA
Client found response content type of 'text/html; charset=uf-8,but expected 'text/xml'
While trying to access the report on reportmanager.I receive an error."The report server is not responding.Verify that the report server is running and can be accessed from this computer"
Any suggestion?
I have a requirement to convert reports from Crystal Reports to SQLServer Reports. Is there any tool to do this? or Do I need to redesignevery report in SQL Server Reports?Madhivanan
View 2 Replies View RelatedI am using VS 2010 and the SSRS that came with it. I am sure its SSRS 2008. Anyway, I added a report file to the project, added an ObjectDataSource and connected this to SQLServer 2008, and display the dataset on the report. The report is using ScriptManager, ReportViewer1, and Report1.rdlc file. I preview the dataset and I have multiple row returned. The problem is I only have one row displayed on the report. Maybe I did a quick and dirty report? What setting of properties did I missed?
View 8 Replies View RelatedI have to convert 'While Do' loop logic in Crystal to SSRS. How to use loops in SSRS.
View 12 Replies View RelatedWe are trying to use reporting services to execute a url when the SSRS report is executed. For example when I execute a SSRS report I would like the report to automatically access [URL] (as an example). The reason we are doing this is we want to access another reporting application but record the number and times of access via the reporting services execution tables/views. Is this achievable by putting some code in the Report properties. Can you open - execute url and then close report via some code.
View 3 Replies View RelatedI have a Manager dashbord report.In this report 1st page contains some tables and 2nd,3rd page contains line charts with tables.Actually what we need is in 1st page tables are pretty simple,we need to add kpi's and shown these tables in kpi. kpi in ssrs and how to add kpi in ssrs reports?
View 2 Replies View RelatedI have tried different techniques to design the report but no luck,
1) design staff 5 days schedule as a calendar between two dates and
2)each staff can have more than one schedule on the same day.
3)Only one staff per page.
4) week will start based on date ex: for staff 2 calendar will start based on date.
Wednesday Friday Tuesday Wednesday Thursday
01/01/14 3/01/14 7/01/14 8/01/14 9/01/14
Sample data:
expected format:
Staff1 (page 1)
Monday Wednesday Friday Monday
13/10/14 15/10/14 17/10/14 20/10/14
Staff 2 (page 2)
Wednesday Friday Tuesday Wednesday Thursday
01/01/14 3/01/14 7/01/14 8/01/14 9/01/14
(page 3)
Saturday Wednesday Thursday Friday Wednesday
11/01/14 15/01/14 16/01/14 17/01/14 22/01/14
and so on....