Reporting Services :: Using Alias When Configuring SSRS Wizard
Mar 15, 2013
I am using SSRS 2008 R2. On my SSRS machine. I went and created the SQL Alias (both for 32 bit and the other one).
Then I ran the SSRS configuration wizard and tried to configure the SSRS service to create a report server database by using a SQL Alias.
It connects to the DB fine but at the last step it gives an error saying no such host. How to configure SSRS Service when they used an alias for the sql server?
val it: unit=()
View 5 Replies
ADVERTISEMENT
Jul 9, 2015
I am trying to automate the setup of SQL server 2014 Standard edition with SSRS. To avoid SSRS being setup using the default port 80 for the webservice and report manager url's, I've chosen to install SQL server with the setting RSINSTALLMODE="FilesOnlyMode" and then use powershell to do the final setup steps.To setup the ReportServer database, I use the "GenerateDatabaseCreationScript" method available in the "MSReportServer_ Configuration Setting" class.
This succeeds without problems however when I use my browser to connect to the web service or report manager url's, I get a "rsInvalid Report Server Database" and a "rsReportServerDatabaseUnavailable " error, respectively.Running the stored procedure named GetDbVersion in the ReportServer database returns "C.0.9.45". If I delete the ReportServer database and then recreate it database manually with the Report Services Configuration manager, the same stored procedure returns "162".
So it seems to me there's a problem with the GenerateDatabaseCreationScript but I can't find any information on this. How can I automate the setup of SSRS and ensure it does not use port 80? There are many manual solutions involving multi-step GUI solutions but the key for me is to automate this with powershell which doesn't appear to be possible.
View 3 Replies
View Related
Apr 26, 2007
Hello Experts,
I have this problem when i go to http://<servername>/reprots
"The attempt to connect to the report server failed.Check your connection information and that the report server is a compatible "
I dont have any problem viewing the deployed reports from the site, http://<servername>/reportserver. only issue is in viewing report manager.
i have searched the forums and did all the suggested changes required in the config file, by adding the full report url and removing the entries in the virtualdirectory tag. still it didnt help....
would be great if someone suggests.
regards,
lakshman.
View 8 Replies
View Related
May 2, 2007
hello experts
I was always told that the only dumb question is the one not asked, so here goes
I am trying to start reporting services, but it does not even show up on the configuration panel in the start menu
During the installation of SQL 2005 Express, one warning I recieved is that Internet Information Services
(ISS) is not installed or disabled. Upon checking the control panel, I did not find it. Googling it brought me
back to MicroSoft, where I can download it (for a nominal fee) Is this what I am going to need to do or am I
missing something here?
thanks
View 2 Replies
View Related
Apr 17, 2008
When we assign security in SRS, in the user name field we have to type the domainusername manually. We cannot see the drop down of all the users in Active directory. Is it possible to configure SRS to get the names from Active directory. If we add any new users to our AD, it automatically refreshes at certain set intervals.
I am talking to a similar function in Sharepoint.
I browsed through a bit on this and think it is not possible. But I want to make sure that I am on the right path.
Can you please correct me if my understanding is right?
I appreciate your help and thank you for your time,
View 3 Replies
View Related
Aug 8, 2007
I have searched the web and have not had any luck on finding the issue to my problem. I'm sure it's probably simple, so here it goes.
When receiving the following error "The permissions granted to user '' are insufficient for performing this operation"
Now, I would like to add to the error message shown above an extra line below it on the web page to reflect something like "Please contact XXX @ XXX if you feel that you need to have your login issue resolved" ...or something meaningful in addition to the default error messages.
I am not getting this error normally, as I have made a typo when login in on purpose! I am just trying to find a way to add more detail to the current error message or change the message to what I want it to say. This would go for any error message received by an end user received through SQL Server 2005 Reporting Services.
Do I have to create some sort of filter to read the message coming back from within SOAP? Are these messages stored in ReportingServices database or htm file?
Thanks!
ICE
View 4 Replies
View Related
Jul 31, 2007
Hello, I have a question regarding installing SQL Express with Advanced Services from the command prompt. I am executing a .cmd file which has the following syntax:
start /wait setup.exe /qb INSTANCENAME=Tim ADDLOCAL=SQL_Engine,Connectivity,RS_Server,RS_Web_Interface SAPWD=1StrongPassword_2 SECURITYMODE=SQL DISABLENETWORKPROTOCOLS=0
Yet, after the installation when I run the Reporting Services configuration tool, none of the settings for Reporting Services are set. I would like to be able to install Reporting Services from the command prompt and have it use the default settings for creating a default website just like you can through the User Interface using the Setup.exe but cannot seem to figure out what I am missing in my .cmd file?
I would appreciate any help anyone can provide.
Tim
View 3 Replies
View Related
Apr 13, 2008
I am trying to follow the instructions on:
http://technet.microsoft.com/en-us/library/bb677365.aspx
they contain many "if"s and links to other sites and I got totally confused and stuck.
The idea is - I need to have one machine with SQL for reporting services and SharePoint databases and the reporting services and the other machine for a complete SharePoint installation (the main server of the farm)
Now I have done the following:
two servers (lets call them SQL and MOSS)
The domain contains the following users:
sqlservices: for running all the SQL services and reporting services
moss: for administering MOSS databases
moss-services: for running all the MOSS services
Machine SQL - installed Windows Server 2003 Standard Edition SP1, joined to the domain as SQL
The following is done from a local Administrator account:
IIS 6 with ASP.NET installed
SQL Server 2005 with SP2, Reporting services installed but not configured
all the services are running as domainsqlservices
.NET 3.0 installed
http://support.microsoft.com/kb/918642 fix installed
done WINDOWSMicrosoft.NETFrameworkv2.0.50727aspnet_regiis €“i
MOSS as Web Front installed, not configured
Machine MOSS - installed Windows Server 2003 Standard Edition SP1, joined to the domain as MOSS
The following is done from a local Administrator account:
IIS 6 with ASP.NET installed
.NET 3.0 installed
http://support.microsoft.com/kb/918642 fix installed
done WINDOWSMicrosoft.NETFrameworkv2.0.50727aspnet_regiis €“i
Computers->My computer->DCOM Config->IIS WAMREG admin Service->PropertiesSecurity->Customize->Edit, added domainmoss-services and domainMOSS users with rights Local launch, Local activate
MOSS Complete installed, configured for: New server farm
Database server: SQL
Username: domainMOSS
Port: Default
Auth: NTLM
SharePointRS.msi installed to enable RS in SharePoint Admin page
Then temporarily gave to the user domainMOSS sysadmin rights in the SQL server on the SQL machine to avoid errors with creating databases while configuring SharePoint from the Admin Portal.
From the Admin Portal configured
Office SharePoint Server Search with domainmoss-services account
Shared Services Administration €“ New SSP created with 2 separate web apps for SSP and MySites, both app pools run as domainmoss-services and SSP itself runs as domainmoss-services
Windows SharePoint Services Search configured, Service Account - domainmoss-services, Content Access Account - domainmoss-services
Everything went OK.
Now came back to the machine SQL:
run Reporting Services Configuration and:
Report Server Virtual Directory €“ created new, called it ReportServer. When hit Apply, the applicatin suddenly quit, but I checked €“ the Virtual Directory was registered on the IIS and working.
Checked if Windows service identity is domainsqlservices, OK.
Web service identity: Application Pool: New
Name: ReportServer
Windows Account: domainsqlservices
Apply, everything went fine.
Database setup: choose server SQL, Connect
Database name: New name: ReportServer,
checked Create the report server database in SharePoint Integrated Mode
OK
Credeantials Type - Service credentials (I guess it means previously set domainsqlservices will be used)
Apply,OK, everything went fine.
Launch SharePoint Products and Technologies Configuration Wizard, Connect to an existing farm, Database server: SQL, Retrieve datbase names: selected SharePoint_Config, Username: domainMOSS, Next, everything fine here.
Now as far as I understand I need to give reporting services an access to SharePoint databases? Went to the machine MOSS, launched SharePoint 3.0 Central Administration:
Application Management-> Reporting Services-> Manage integration settings, URL: http://SQL/reportserver, Windows Authentification, OK
then back, Grant database access-> Server Name: SQL, OK, now it is asking for credentials. And now the problem: no matter what I enter (domainsqlservices, domainMOSS) I get a message: €žA connection to the computer cannot be established€?. Why, why, why?
I can ping the server, SharePoint services are running fine and they are using the SQL server on the SQL machine and there are no errors in the event viewer (they should be if there were any problems to connect the SQL databases).
If I enter wrong credentials, I receive "Unable to log on with the given username and password.", so I guess there IS a connection to the computer (or how else could SharePoint determne that login is wrong?).
Also, if I open http://SQL/reportserver, I get €žThe report server has encountered a configuration error€? and the log in C:Program FilesMicrosoft SQL ServerMSSQL.2Reporting ServicesLogFiles says €žSharePoint content service is null. Report Server may not have joined the SharePoint farm, or Report Server service account may not have been granted access to farm.€? I guess it is OK while I have not granted access to the SharePoint databases?
Please, show me, what did I do so wrong that €žA connection to the computer cannot be established€?? How can I grant the access and finalize configuring Reporting Services?
Thanks.
View 9 Replies
View Related
Feb 1, 2008
Hi,
I have two calculated values done by BI Wizard: "Year Over Year Growth" and "Year Over Year Growth %" which are part of my Time Dimension. Those calucalations work fine in a cube browser as long as I use the Time hierarchy connected to those two calculated values. However, when I create a Dataset in Reporting Services and run it, the only values I get for "Year Over Year Growth" and "Year Over Year Growth %" is: "infinity". It is ok with the first year becuase it doesn't have a previous year to compare to but the next year should work have some values other than "infinity". Does anyone experienced something like that? Are there any solutions to that?
Thanks for any help!
View 1 Replies
View Related
Sep 3, 2015
Currently we are using Custom Delivery Extension for SSRS 2008R2 We are planning to move it SSRS2012
My Question is: Whether we can use the same Code used for SSRS2008R2 to SSRS2012?
if not what code changes we should do?
View 3 Replies
View Related
Nov 3, 2015
Is there any way to get the report toolbar using SOAP Api  in SSRS reporting.
View 6 Replies
View Related
Jun 19, 2015
We've got a requirement to build the real time report. user can browse report at any point of time and need to see the latest data(stock market) in the report.
I've few options down...
1. Directly point to OLTP database as source and write stored procedure to show result set.
2. Replicate the database and write the SP's to reports. To avoid pointing directly to OLTP db.
3. To build the datawarehouse with dim & facts to show it in reports. I prefer this as a standard method, but this would have some latency depending on trasaction load which will differ from the requirement.
View 3 Replies
View Related
Jul 23, 2010
We built our prod server [vm] with SQL Server 2008 R2 on Server 2008 R2. It works nicely. Then we made a copy of the VM and renamed it (so our test environment would be IDENTICAL to production). After that, SSRS was broken: I get "HTTP Error 503. The service is unavailable." I can't connect via http, or SSMS.
We have tried:
*Â Running SSRS config tool (several times)
* Running with/without the IIS Server Role
*Â Dropping & recreating the SSRS keys
*Â Recreating the ReportServer database, etc
*Â Checking all of the accounts, permissions, etc
*Â Running SQL Repair
*Â Going through the registry to fix any references to the machine's old name
*Â Uninstalling, reinstalling SSRS
* Completely uninstalling ALL of the parts of SQL Server 2008 R2, deleting all directories, removing references to SQL Server from the registry, rebooting, reinstalling everything.
None of this has worked. SSRS [R2] is still 503 on our test box.
the SSRS [NT] service seems to run, without error. The Event Viewer doesn't seem to be recording any errors. The SSRS logs say that the default URL is wrong, but we get the same error in Prod, and Prod works fine. The other SQL Logs say something about not being able to contact the service. However, as I said, the [NT] service seems to be working fine.
View 4 Replies
View Related
Sep 29, 2006
Hey everyone...I'm completely new to SQL Server and I'm trying to learn the Reporting Services tool. I just installed SQL Server 2005 and selected to install all the options, atleast I'm 99.99% sure I did.
When I go to launch Report Services Configuration, I get "No report servers were found on the specified machine. Details: Invalid namespace". Do I need IIS for this to work?
Also, I do not think the AdventureWorks database was installed, I cannot seem to find it anywhere. I have tried to go back through and reinstall it, but it says that it is already installed.
Also, is there a certain order that you are supposed to install things? i.e. SQL Server before Visual Studios?
Thanks in advance.
*Edit* BTW, I'm using Windows XP, SQL Server Enterprise Edition, and VS.NET 2005.
View 5 Replies
View Related
Aug 5, 2015
Is it possible to have my pop up SSRS box size according to the size of the returned value? Issue is, i have a text box that returns a note field and depending on the number of notes, it can and will vary in size. I am currently using this code
="javascript:void window.open(" &"'"& Globals!ReportServerUrl &"/Pages/ReportViewer.aspx?"
&Globals!ReportFolder &"/Patient%20Eligibility&rc:Parameters=False&rc:Toolbar=False
&VPATIENTPROFILEID="& Fields!PatientProfileID.Value
&"
','DetailsWindow','left=300,top=180,width=920,height=455,status=no,menubar=no,scrollbars=yes,location=no'"Â &
")"
View 2 Replies
View Related
Sep 5, 2005
I have a requirement to convert reports from Crystal Reports to SQLServer Reports. Is there any tool to do this? or Do I need to redesignevery report in SQL Server Reports?Madhivanan
View 2 Replies
View Related
Sep 13, 2010
I am using VS 2010 and the SSRS that came with it. I am sure its SSRS 2008. Anyway, I added a report file to the project, added an ObjectDataSource and connected this to SQLServer 2008, and display the dataset on the report. The report is using ScriptManager, ReportViewer1, and Report1.rdlc file. I preview the dataset and I have multiple row returned. The problem is I only have one row displayed on the report. Maybe I did a quick and dirty report? What setting of properties did I missed?
View 8 Replies
View Related
Aug 13, 2015
I have to convert 'While Do' loop logic in Crystal to SSRS. How to use loops in SSRS.
View 12 Replies
View Related
May 29, 2015
We are trying to use reporting services to execute a url when the SSRS report is executed. For example when I execute a SSRS report I would like the report to automatically access [URL] (as an example). The reason we are doing this is we want to access another reporting application but record the number and times of access via the reporting services execution tables/views. Is this achievable by putting some code in the Report properties. Can you open - execute url and then close report via some code.
View 3 Replies
View Related
Apr 29, 2015
I have a Manager dashbord  report.In this report 1st page contains some tables and 2nd,3rd page contains line charts with tables.Actually what we need is in 1st page tables are pretty simple,we need to add kpi's and shown these tables in kpi. kpi in ssrs and how to add kpi in ssrs reports?
View 2 Replies
View Related
Feb 9, 2015
I have tried different techniques to design the report but no luck,
1) design staff 5 days schedule as a calendar between two dates andÂ
2)each staff can have more than one schedule on the same day.
3)Only one staff per page.
4) week will start based on date  ex: for staff 2 calendar will start based on date.
Wednesday  Friday    Tuesday   Wednesday   ThursdayÂ
01/01/14 Â Â 3/01/14 Â Â 7/01/14 Â Â 8/01/14 Â Â Â Â Â 9/01/14
Sample data:
expected format:
Staff1 (page 1)
Monday    Wednesday   Friday   Monday
13/10/14 Â 15/10/14 Â 17/10/14 Â 20/10/14
Staff 2 (page 2)
Wednesday  Friday    Tuesday   Wednesday   ThursdayÂ
01/01/14 Â Â 3/01/14 Â Â 7/01/14 Â Â 8/01/14 Â Â Â Â Â 9/01/14
(page 3)
Saturday    Wednesday  Thursday   Friday     Wednesday
11/01/14 Â Â 15/01/14 Â Â 16/01/14 Â Â 17/01/14 Â Â Â 22/01/14
and so on....
View 9 Replies
View Related
May 30, 2015
I was trying to have multivalue options in a ssrs report, and I used this query Â
SELECT {[Measures].[Sales Amount],[Measures].[Tax Amount]} on columns,non empty([Product].[Color].[Color],[Product].[Product Name].[Product Name]) on rows
from
( selectÂ
(STRTOSET(@color))
 on columns
 from [Analysis Services Tutorial])
But the report only showed the default value as an option(in this format [Product].[Color].&[Multi] whic is not presentable),and what I also noticed in the parameter option is that, the available values option is set to none , also when I try to use get from query , it does not give me the vales for the parameters,and when I right click the designer pane it does not have the show hidden dataset option.I have created the parameter with multivalue option. what can I do to get the multivalue option to work.
View 2 Replies
View Related
Jun 11, 2015
My system environment: win2008 R2 SP1 64bit + SQL 2005 SP4 32bit
I amended the configuration file of rsreportserver.config with the below:
<Extension Name="CSV" Type="Microsoft.ReportingServices.Rendering.CsvRenderer.CsvReport,Microsoft.ReportingServices.CsvRendering" >
  <Configuration>
  <DeviceInfo>
   <Encoding>UTF-8</Encoding>
  </DeviceInfo>
  </Configuration>
  </Extension>
If I run the report and then click export by selecting the csv format, it looks ok with the encoding of UTF-8.
However, the same report , when I created a subscription and saved it in the hard driver. Its encoding became USC-2 Little Endian.
View 2 Replies
View Related
Jan 7, 2010
When the SSRS report exported to CSV file, all the column headers are added in the first row. The issue here is, I have hidden( thru Visibility property) some of the columns in the report but those columns are also displayed in the header row(first row)CSV file and the blank values for their corresponding data.for example, I have displayed only below 3 columns out of 6 columns in the report.col1, col2, col3but the CSV generated as below:
format..col1,col2,col3,col4,col5,col6a1,a2,a3,,,b1,b2,b3,,,c1,c2,c3,,,
I don't want the highlighted items.The TableColumn Visibility property has been setup as below..
=IIF(Fields!col4.IsMissing, TRUE, FALSE)
When the report is exported to other formats(like Excel,XML..)Â this works fine.. i.e., no hidden columns are displayed.
View 4 Replies
View Related
Apr 4, 2008
Hi All,
I am fairly new to SSRS. I want to install SSRS on my local system which has OS of Win XP sp2 (not a server). I have installed SQL Server instance on this box. Can any body tell if i need Win Server 2000 or 2003 OS to install SSRS or can i use Win XP, if so please give some guidelines.
Thank's in advance..
View 2 Replies
View Related
Jun 18, 2015
I have below query which is working fine in SQL but if i use same query in SSRS dataset then it is not working at all.If i put only one condition in where clause then it works but if i put multiple conditions then it does not works in SSRS and through error "data is not available".
SELECT id,
DATEDIFF(DAY, Created, BMTRequestReviewDate) AS 'EvaluateDays',
all code goes here
FROM [dbo].[SBWT_Data]
WHERE
upper(Status) not like '%XX%'
AND upper(Status) not like '%DELETED%'
upper(Status) not like '%CLOSED%'
---OR
WHERE Status NOT IN ('90 - Closed','XX - Rejected','XX - Request Rejected','XX - Deleted')
As you can see in code i have tried with both where conditions but it is not working. It seems that SSRS does not supports multiple conditions for same field.
View 5 Replies
View Related
Dec 10, 2008
I have 400 records in my report , i want display 20 records per page , how can i do the same in ssrs.
View 18 Replies
View Related
Sep 9, 2015
From the image above, I am totaling the column HHMMSS is SSRS with the below expression:
=CStr(sum(CInt(split(Fields!HHMMSS.Value,":")(0)))+sum(CInt(split(Fields!HHMMSS.Value,":")(1)))60)
&":"& CStr(sum(CInt(split(Fields!HHMMSS.Value,":")(1))) mod 60+sum(CInt(split(Fields!HHMMSS.Value,":")(2)))60)
&":"& CStr(sum(CInt(split(Fields!HHMMSS.Value,":")(2))) mod 60)
I equally tried:
=iif(Fields!HHMMSS.Value = "", "", CStr(sum(CInt(split(Fields!HHMMSS.Value,":")(0)))
+sum(CInt(split(Fields!HHMMSS.Value,":")(1)))60)
&":"& CStr(sum(CInt(split(Fields!HHMMSS.Value,":")(1)))
mod 60+sum(CInt(split(Fields!HHMMSS.Value,":")(2)))60)
&":"& CStr(sum(CInt(split(Fields!HHMMSS.Value,":")(2))) mod 60))
and nothing works. What could be wrong with my expression?
View 7 Replies
View Related
Nov 24, 2015
The data source is Fetch XML - so all the values are string.I need to sum the values but getting an error:
Warning  1      [rsAggregateOfNonNumericData] The Value expression for the textrun ‘Textbox25.Paragraphs[0].TextRuns[0]’ uses a numeric aggregate function on data that is not numeric.  Numeric aggregate functions (Sum, Avg, StDev, Var, StDevP, and VarP) can only aggregate numeric data.I tried converting it to INT but it returns a large number which does not match what I'm expecting.
View 10 Replies
View Related
Aug 4, 2015
I am having report like below
Manager Name ClientName  Procedure  count
Paul                Infi              P1               3
                                           P2             3
                                          P3            3
Hun              wallmaart    P1         1
report group on ManagerName.
How to get the count column.
View 2 Replies
View Related
May 19, 2015
Previously I was using SSRS to create a local website(native mode) for our domain users to access. I wonder whether it is possible to share the website to outside users(just like youtube, everyone can access it). Is there a possible way to achieve that?
View 3 Replies
View Related
Nov 1, 2012
I am using SQL Server 2005 and SSRS 2005, and I am trying to display a PDF (image datatype, application/pdf filetype) from a SQL Database. Â There is no MIME option for PDF, so it seems my options are limited. Â Is there a way to display the PDF, or maybe convert the binary data at the database level?
View 2 Replies
View Related
Sep 30, 2015
I have below report with following data
Team_Name           Count
Team10 Â Â Â Â Â Â Â Â Â Â Â Â Â 100
Team4 Â Â Â Â Â Â Â Â Â Â Â Â Â Â 30
Team1 Â Â Â Â Â Â Â Â Â Â Â Â Â Â 55
Team19 Â Â Â Â Â Â Â Â Â Â Â Â Â 44
Team5 Â Â Â Â Â Â Â Â Â Â Â Â Â Â 10
What is the best approach to sort this data based on the Team name in 2 reports - One is in Tablix and other in a column bar chart report?
View 4 Replies
View Related
