Reporting Services :: Using SharePoint Checkbox / Choice Column In Multi-value SSRS Filter
Jul 7, 2015
In one of my datasets, my field "Team" is a SharePoint choice column that is a checkbox, so multiple entries are in it. In my Parameter, I have it as a multiple-value, and I'm specifying the values directly in both available and default.For my filter, I have [Team] IN [@Team], which is where the problem comes in. It will only filter the results of entries that only have ONE listed in Team.
For example: One entry has "Building" in Team column which SSRS is displaying. But it will NOT display entries where "Building" and "Clerks" are displayed. I believe this is because SSRS sees this as 1 line of text, so it does not just see"Building" but "Building" and "Clerks" so it will omit it.I've tried to have my parameter set to "Get values from a query" but the problem there is the drop-down is too confusing since it interprets it as "Building" and then "Building, Clerks", and then "Building, Clerks, Economic Development' as another drop down, which defeats the purpose of the filter.
how I can get SSRS to show ALL entries that contain "Building" when I choose "Building" as a drop-down choice in my parameter? Instead of only showing ones that is Building only and dismissing other teams?
I am setting up sharepoint and sql server integration environment. I am considering the following topology: PowerPivot for SharePoint 2013 and Reporting Services in SharePoint mode Two Server Deployment
[URL]
I am looking to follow the topology example by the letter, which involves installing PowerPivot for SharePoint (aka SSAS in SharePoint mode) in the same server as my SQL, and installing SSRS in SharePoint (SP) integrated mode in the same server as SharePoint.
I understand, however, that if I wanted to install SSRS in SP mode in the same server as SQL, I could but only if the server contains the SP Object Model.
My first question is, what would involve having the SP Object Model in the SQL Server?
Would only installing SP binaries be enough; or Do I need to do a minimal install of SP in the SQL server enough for it to joing the SP farm? And most importantly, what would be the licensing implications for SP in case I want proceed down this route and have SSRS in SharePoint mode installed in the same server as the SQL?
I have integrated sharepoint list data to SQL Server reporting services. I am using the below to query sharepoint list data using sql reporting services.
By using this query, I am getting a dataset which includes all the columns of sharepoint list. Among these columns, I wanted to display only 2 columns (i.e Region and Sales type) using chart. I have created a Region parameter but when I click preview, the drop down box is giving me all the repeatative values of region like
RG1,RG1,RG1,RG2,RG2,RG2,RG2,RG3..........
I wanted to display only distinct values of Region parameter so that whenever end user select region from the parameter drop down, it will display the respective value of Sales type column.Also when I select only RG1 parameter, it is giving me a chart including the sales type of all the Regions. (it should display me only the sales type of RG1) How can I link these 2 columns so that they will display the values respectively.
I use xml to create a checkbox control on a filter page. The reports runs when it is checked. However, when the checkbox is unchecked it complains about the parameter missing. Any solutiion?
I have installed SQL 2012 on my DB Server. The SSRS database version table(s) list the current version as 163. The Version number that's displayed in the Programs and Features for SSRS Add-in for SharePoint (yes, on the db server) is 11.2.5623.0.
On my two SharePoint servers the version number for SSRS Add-in for SharePoint shows 11.2.2058. I have installed SQL Server 2012 Service Pack 2 on all three machines. When the SharePoint box calls into SSRS to render a report I get this error:
The version of the report server database is either in a format that is not valid, or it cannot be read. The found version is '163'. The expected version is '162'. --->
The version of the report server database is either in a format that is not valid, or it cannot be read. The found version is '163'. The expected version is '162'.
what else I need to install - and where - to correct this error. What is expecting version '162' and why?
I am looking for a good tutorial on how to set up Data Driven subscriptions through the SharePoint 2012 version of SSRS. I am needing to set up a Data Driven subscription that uses one report, but sends out the specific portion of the report to the appropriate recipients. I have used the information located at URL.... but it doesn't seem to provide all the steps needed to schedule the reports needed. It focuses around setting up the reports to go to shared folder locations. I need something around setting it up to go to email recipients.
Search option in the filter of SSRS, like in the filter let say for the category parameter we have 100 values , instead of scrolling down for the required option. can we have an option for search in the filter so that when we type certain value it will come up for example in the Google website, when we type the value in the search bar in the drop down we will get the option..same as that...........can we do in the ssrs.
If yes how can we achieve? Do we need to write any .net code?
I was trying to have multivalue options in a ssrs report, and I used this query
SELECT {[Measures].[Sales Amount],[Measures].[Tax Amount]} on columns,non empty([Product].[Color].[Color],[Product].[Product Name].[Product Name]) on rows
from ( select (STRTOSET(@color)) on columns from [Analysis Services Tutorial])
But the report only showed the default value as an option(in this format [Product].[Color].&[Multi] whic is not presentable),and what I also noticed in the parameter option is that, the available values option is set to none , also when I try to use get from query , it does not give me the vales for the parameters,and when I right click the designer pane it does not have the show hidden dataset option.I have created the parameter with multivalue option. what can I do to get the multivalue option to work.
Works fine in Visual Studio. Once deployed to SharePoint though, the drill through returns an error that says report can't be found. So I added the .rdl to the conditional statement in the report Design.
We have a Report Server integrated with SharePoint. A month ago we deployed a report (rdl file) in SharePoint, but the person who deployed it was no longer connected with us. So we decided to deactivate it in our Active Directory. Yesterday, our users returned issues regarding they are unable to access their report. I believe the issue was "object reference not set to an instance of an object".
So I tried to download the rdl file and redeployed it but i am getting error upon deploying to SharePoint. My workaround is to delete the rdl file in SharePoint, redeploy the shared datasource and shared datasets and the rdl file. It went and was now able to run the report in SharePoint.
Is there something relation/happened when deactivating the account in AD that users unable to access the report in SharePoint?
I have a set of SSRS reports published on the server. It can be accessed through a web application or through SharePoint. Most of the reports work fine through both - web app and SharePoint. However, one of the report, which returns large amount of data has some problem:
1. It generates fine from web app 2. It generates fine from SharePoint; only if one or two values selected from Filter dropdown 3. However, if all items (about 20 items) selected from Filter dropdown... and click on View Report, it processes for a while and then shows nothing. The page remains blank.
Did some research and felt the problem is with Distributed Cache Service.
I have created a ssrs report using ssrs-2012 that contains 2 tables 2 pie charts and 1 line chart. But I am unable to see 2 pie charts and and 1 line chart after deploying the rdl in sharepoint server.
Why I am not able to see those charts, or sharepoint server will not support charts at all.
I have published SSRS reports to sharepoint and used the Reporting Services Report viewer to present the reports on a Page. Everything works fine for the day, however in the morning, when I go to view the page, I get an error message
The report server cannot process the report. The data source connection information has been deleted. (rsInvalidDataSourceReference)
i have created an report which retrieve data from table which contains a datetime field. The data of that particular field is stored in UTC time. when i navigating the report from sharepoint site i wish the datetime field will be converted into local time based on the selected timezone of the user.
I have what seems to be a common problem where I have names like "Last, First" that I need to be able to select using a multi-value parameter, which of course, SSRS passes as comma-delimited and gets messed up. I need to find a way to use a different delimiter or pass CHAR(44) instead of the comma, or something. Even worse, some people have suffixes and multiple commas in one name!
issue where SSRS reports being executed from a report library in SharePoint intermittently are reloaded after hitting the apply button to run. We are using SSRS 2010 and SharePoint 2013 in integrated mode. So a user clicks on the report, fills in the parameters and hits apply. Maybe 70% of the time the report runs fine. The other 30% the report just reloads and wipes out any parameter selections. We do have a load balancer in front of the web servers.
I've ran fiddler to capture some of the error logging.
Things we have tried. Multiple versions of IE 8,9,10,11, Firefox, Chrome. All browsers seem to exhibit the behavior.
We ran so more traffic monitoring and it doesn't appear on these refreshes that report actually connects to the data context so it seems to be failing prior to that. (Possibly at the SharePoint server. Logging from the server apparently didn't show much in terms of when this occurred) It doesn't seem to matter if the report has 1 or 10 parameters.
We did notice that when we took the load balancer out of the equation and just hit the web server directly, the refreshes "appeared" to decrease in regularity but still occur.Also, the reports do not exhibit the refresh issue when running locally within Visual Studio 2013.
I am creating a SSRS report using a SSAS cube as it data source. The user would like to select multiple values from a reporting parameter that is then used as a filter on the MDX statement. I am bale to have the report work successfully when only one value is selected but not when multiple values are selected; the report uses only the first value from the reporting parameter when it contains multiple values. How do I filter an MDX query using a SSRS report parameter with multiple values?
Created Prod order status report, in status, we have different status
created =0 start =4 released =3 reported as finished =5 ended =7
I have the report, in report don't want to show the Prod order for ended status, how can I add the filter for this so it can show for all the other status not ended status. when I did on filter <7 , it did not work
I'm using SSRS 2005 which connects to SQL Server 2005. I need to pass Multi valus for single parameter...
E.g. Command type : Text SELECT * FROM COUNTRY where CountryId IN ( @CountryID)
If i tried to preview using single parameter, it shows the record without any problem. However when i tried to put multi values, it gives error message?? I read somewhere which says, need to set to multivalue. But, i could not find the place to set the multi value option...
How to solve it?? Your suggestion/recommendations greatly appreciated.
We have SSRS reports (pointing to SQL 2012) containing cascading parameters that we have deployed on SharePoint 2013 and once a user makes a selection to the parent parameter, child parameters are getting refreshed based on the selection in the parent parameter and then we see this:
Once we hit Apply, the Loading image comes up and approximately10 seconds later, The whole webpage gets refreshed and the parameter selections get reset to default parameters.
This is getting frustrating because there are about 10 parameters in the report and once a user makes selections and hit apply if the page gets reset, the user has to make all the selections again.
We are working with Microsoft support on this who suggested us to increase the timeout setting of DistributedCache service on all our SharePoint servers which did seem to work initially but I do see this issue happening occasionally.
I've been running into this issue quite a few times, and have been unable to solve it through reading various posts/forums. Here is the issue
Software Details: Datawarehouse Database - SQL Server 2008 R2 Reporting Services Version - SSRS 2008 R2 Development Environment - Visual Studio 2008 Problem Details:
I have been writing reports based of a Relational Datamart with dimensions and facts. The report in question uses dimensions for parameters and facts for content. Multi valued parameters are enabled in the report query by using the 'IN(@Paramenter)' statement within the report query. It has a total of 6 multi-value parameters. I assign the same available values from dimension datasets for each parameter to it's default parameter. Theoretically all the values in the option lists should be selected after first render. This is not always the case.
Example: SELECT * FROM dbo.MyTable WHERE TableColumn0 IN (@Parameter0) AND TableColumn1 IN(@Parameter1) AND ....N (continue syntax to 6 multi valued parameters)
Some of the multi-value drop down lists are defaulting to have every value selected, and some are not. The problem is I need to know why some parameters are not selecting all by default when specified.
I have an SSRS report with several variables, some of which are multi-valued. The main query that feeds the report uses some table value functions. For example, the query looks something like this:
select tv1.a, tv1.b, tv2.x, tv2.y, tbl.m, tbl.n from tableValueFunction1(@MultiValueParam) as tv1 inner join tableValueFunction2(@MultiValueParam) as tv2 on tv1.xxx = tv2.xxx inner join regularTable as tbl on tv1.xxx = tbl.xxx
where tbl.abc in (@MultiValueParam).When I try to run this, I get an error saying that I'm feeding the wrong number of parameters into the table value functions. I've fed multi-valued parameters to stored procedures before and used a splitter function to split out the comma separated values, so I was planning to do the same thing in this scenario. However, this is different. When I look at the query in SQL Profiler, it shows discrete values for the multi value parameter. For example, the same query above looks like this when viewed through the profiler (using 1,2,3 as my multi-value selection):
select tv1.a, tv1.b, tv2.x, tv3.y, tbl.m, tbl.n from tableValueFunction1(1,2,3) as tv1 inner join tableValueFunction2(1,2,3) as tv2 on tv1.xxx = tv2.xxx inner join regularTable as tbl on tv1.xxx = tbl.xxx where tbl.abc in (1,2,3)
In other words, SSRS isn't converting the multi-value parameter to a comma separated string, like it normally does.
I am trying to get a null value to pass to a multi-select parameter in SSRS 2005. The multi-select box is getting its possible values from the following query:
SELECT NULL CMP_ID, '<all companies>' COMPANY UNION SELECT DISTINCT T1.CMP_ID, T1.COMPANY FROM VIEWCOMPANYLIST T1 WHERE T1.DIV_ID = 2 ORDER BY 1
This query is pre-pending a row with NULL as the first ID. The resulting data set is exactly what you would expect - Row 1 has a null in column CMP_ID, and <all companies> in column COMPANY. All the rest of the rows have proper data. My multi-select parameter box is of type Multi-value Int, with possible values populated by this query and a default of NULL. However, when I preview the report, the <all companies> row disappears.
It's not even in the list, and it's not getting selected by the default selector. So, of course, when I try to View Report without selecting anything, I get prompted to select a company. Why the prepended row in my dataset is getting dropped from the multi-select box at display time? And yes, I have to be able to pass a null value because the stored procedure on which the report is based expects this parameter to be optional.
Since I wasn't getting any replies with answers or suggestions to my initial posting, I figured I would continue to list the problems and solutions I've encountered while trying to setup and utilize SharePoint integration mode, and read data from SharePoint with SSRS reports (developed in VS2005). Hopefully this is helpful to anyone that is also trying to learn all this stuff and figure it out.
(Single server - W2K3R2_SP2 as: DC / SQL2005 Standard / MOSS2007 Enterprise - see the bottom of this posting for the steps I took to set that up)
Note: After I get this to work, I intend to post my experiences for setting up SharePoint Integration with SQL and SP on separate boxes.
1. In the new reporting section under SharePoint application management in the Central Admin Console, the Grant database AND Set Server Defaults work when using the domain admin account, but not when using the SQLSPS service account I used to setup both SQL and SharePoint. Why can't I use the service account? Is the domain admin account now going to be used as a service account for accessing the sharepoint database?
This question remains unanswered as of yet.
2. Reporting Services configuration tool shows Sharepoint integration as red x when I create a new database in integration mode. (the service account SQLSPS and the Server object are members of the group WSS_WPG). If I switch back to native mode (the original reportserver database), the red x goes to a blue exclamation instead. Using Service Credentials or Windows credentials (as either the service account SQLSPS or as domain admin) doesn't change anything.
RESOLVED by using a domain user account for the ReportServer WebApp. Even though everything is installed on the same machine, it seems using the default of NETWORK SERVICE wasn't acceptable. Possibly because SharePoint is configured to allow additional machines in the farm?
3. http://servername:8080/reportserver will display Report Server information as it did before the integration on port 80, but http://servername/reportserver doesn't display anything through SharePoint.
Resolved. I needed to define a repository before I could view it (go figure). When I created a sharepoint site based on a report center template, created a data connection library and report library, and then referenced that by http://servername/sites/myReportCenterSite/myReportLibrary, I was able to see the equivalent of http://servername/reports (which is now disabled due to integration mode).
4. Unable to deploy to new report center sharepoint site I mention above using Visual Studio. I kept getting "A connection could not be made to the report server http://servername/sites/ReportCenter. Server was unable to process request. The request failed with HTTP status 503: Service unavailable (System.Web.Services). In Visual Studio, the project properties were: TargetDataSourceFolder = http://servername/sites/myReportCenterSite/myDataConnectionLibrary, TargetReportFolder = http://servername/sites/myReportCenterSite/myReportLibrary, TargetServerURL = http://servername/sites/myReportCenterSite/
Found these errors in the event logs on the server.
Event Type: Warning Event Source: W3SVC Event ID: 1021 Description: The identity of application pool, 'ReportServer' is invalid. If it remains invalid when the first request for the application pool is processed, the application pool will be disabled. The data field contains the error number.
Event Type: Warning Event Source: W3SVC Event ID: 1057 Description: The identity of application pool 'ReportServer' is invalid, so the World Wide Web Publishing Service can not create a worker process to serve the application pool. Therefore, the application pool has been disabled.
Event Type: Error Event Source: W3SVC Event ID: 1059 Description: A failure was encountered while launching the process serving application pool 'ReportServer'. The application pool has been disabled.
RESOLVED the issue by changing the Application Pool used by reporting services from ReportServer to DefaultAppPool and changing the account DefaultAppPool used from NETWORK SERVICE to my service account SQLSPS. I have no idea why ReportServer is invalid, it was set to use the service account SQLSPS the same as DefaultAppPool is. Perhaps the reporting services add-on makes a change to invalidate this?
5. Attempting to read a SharePoint list using a SSRS report. This should be fun.
First, created a new custom list in the ReportCenter SharePoint sites I've been using and called it myCustomList. I added one item with a title of myCustomListItem1. I don't know if I need to do more than that for a simple test of reporting or not yet.
Second, configured new shared data source. Name = myCustomList1DataSource, type=XML, Connection String = http://servername/_vti_bin/lists.asmx (this URL is viewable in IE), Using Windows authenticaion.
Third, in VS2005 on a workstation in the domain, create new report item (report1.rdl). New dataset for report; Name=Report1DataSet, Data Source=myCustomList1DataSource (Shared), Command type = text, Query String = [See Queries and associated errors below]:
Initial query obtained from: Connecting SQL Reporting Services to a SharePoint List (David Wise) http://www.sharepointblogs.com/dwise/archive/2007/11/28/connecting-sql-reporting-services-to-a-sharepoint-list-redux.aspx
Note: Queries when executing the dataset (which errors out) and when executing a query in CAML Viewer for the same information (which does work just fine) both initially return 401.1 and 401.2 errors (as viewed in Fiddler). Since the CAML query works, I have not tracked this down yet.
Parameter; Name => listName, Value => =myCustomList
Was NOT prompted to define the query parameters
- Gets this error: "An error occurred while setting the command text property of the data extension command. The XmlDP query is invalid. (Microsoft.ReportingServices.DataExtensions)."
- Advanced information from the error => 'http' is an unexpected token. The expected token is '"' or '''. Line 2, position 19. (System.Xml)
B. Changed: Placed the namespace URL in quotes (also tried with and without / in namespace after /soap)
Parameter; Name => listName, Value => =myCustomList (also tried Value => myCustomList) (no equal sign)
Clicked "!" to execute, and got prompted to define the query parameters Entered Name => listName, Value => myCustomList
- Gets this error: "failed to execute web request for the specified URL (Microsoft.ReportingServices.DataExtensions)."
- Advanced information: <faultstring>Server did not recognize the value of HTTP Header SOAPAction: http://schemas.microsoft.com/sharepoint/soap/GetListItems/.</faultstring>
C. Try the query string that seems to work for Stramit CAML Viewer to read myCustomList
Also tried <Query xmlns="http://schemas.microsoft.com/sharepoint/soap/"> </Query>
And tried entering no query...
Parameter; Name => listName, Value => =myCustomList (also tried Value => myCustomList) (no equal sign)
Clicked "!" to execute, and got prompted to define the query parameters Entered Name => listName, Value => myCustomList
- Gets this error: "failed to execute web request for the specified URL (Microsoft.ReportingServices.DataExtensions)."
- Advanced information: <soap:Fault><soap:Code><soap:Value>soap:Receiver</soap:Value></soap:Code><soap:Reason><soap:Text xml:lang="en">Server was unable to process request. ---> Data at the root level is invalid. Line 1, position 1.</soap:Text></soap:Reason><soap: Detail /></soap:Fault>
RESOLVED. Went back to the query used in B above, and mysteriously it works now. This could be the "funny things happen" symptom I've been reading about. We'll see if it continues to function.
Here's what I've learned so far on Issue #5:
1. XML is confusing. XmlDP is even more confusing...whatever that is. Apparently it's new to/with Reporting Services in SharePoint integration mode? 2. There is far too little documentation regarding XmlDP and querying SharePoint lists from SQL Reporting Services. 3. According to http://msdn2.microsoft.com/en-us/library/ms159741.aspx: You must use the generic query designer to create the query. The query is not analyzed to identify parameters; therefore you must create parameters through the Parameter tab on the Dataset dialog box.
Tried this query:
<Query> <SoapAction>http://schemas.microsoft.com/sharepoint/soap/GetListItems</SoapAction> <Method Namespace="http://schemas.microsoft.com/sharepoint/soap/" Name="GetListItems" /> <Parameters> <Parameter Name="listName"> <DefaultValue>myCustomReport2</DefaultValue> </Parameter> <OrderBy> <FieldRef name="ows_Date" /> </OrderBy> </Parameters> </Query> I was still prompted for the listName and the list returned with ows_Date still out of order. So maybe that proves this statement is true? <translation: why make it convenient when it's already [somewhat] functional?> 4. When building the dataset, anything I place in the "Query string" box has to be enclosed in <query></query> tags or it errors out. I am trying to understand how to translate the CAML viewer query (which does work but isn't wrapped in query tags) into something that fits between query tags, and it hasn't gone well so far. <translation: To be at one with your reports Grasshopper, you must understand xml> 5. According to http://srv1/sites/ReportCenter/_vti_bin/lists.asmx, "GetListItems" operation is supported <translation: you're getting warmer...> 6. According to the soap output of my site http://srv1/sites/ReportCenter/_vti_bin/lists.asmx?op=GetListItems, I am only allowed to specify the following parameters: listName, viewName, query, viewFields, rowLimit, queryOptions and webID. <translation: that and $3.00 will get you a cup of coffee> 7. According to http://www.sharepointblogs.com/dwise/archive/2007/11/28/connecting-sql-reporting-services-to-a-sharepoint-list-redux.aspx, only listName, viewName and rowLimit parameters are usable(?) (query and queryOptions may not be working properly with SSRS). <translation: that kind of sucks> 8. When this started mysteriously working again, I tested using the "/" at the end of the namespace (wouldn't work without) and the "=" sign in front of the parameter value as defined on the parameter tab of the dataset (turns out to be optional).
As long as I can query SharePoint and get my list information back, I'm going to consider this issue closed and move on to actually using this information in a report. I'm sure that won't work right either, but why stop now?!
6. Ok, now that I can read SharePoint list data with SSRS, I need to try and actually do something with it.
A. Begin by setting up new data to report on
1. Create a new custom list (myCustomList2) and add a test record. This list will simulate the data we intend to submit to SharePoint using InfoPath, so it has a number of custom/created columns in it
2. Modify the working information from #5 above; add a new shared data source (myCustomList2DataSource), tell the dataset to use the new shared data source, change the information set in the parameter tab (Name => listName, Value => =myCustomList2) and test the dataset. Lucky me, it actually returned the record I entered on the first try.
B. Begin to build the report with the dataset returned
1. So, as I'm feeling good that it's actually reading the list in Step A without me threatening to destroy the machine, I look to the left in the Dataset results navigation pane in VS2005 and realize there are NO fields for me to choose to report on. 2. At this point, I have no clue what to do about getting this XML data into a report. Not that I have a large clue about SSRS otherwise, but I have at least been able to build SSRS reports when using a SQL database as the datasource. Fyi, http://msdn2.microsoft.com/en-us/library/ms159741.aspx states: "Reports can use data from XML documents and Web services, or embed XML in the query. There is no built-in support for retrieving XML documents from a SQL Server database.", in case anyone is trying to do that....
RESOLVED. Since the fields were not appearing automatically, I had started to add new fields to the dataset manually (if it doesn't work, beat it with a hammer, right?). I entered half a dozen or so fields, each one with the exact name as displayed in the query results, and then decided it would be fun to hit the refresh fields icon. As soon as I did that, all the fields shown in the query immediately appeared in the dataset and I was able to add them to a report. I don't know if I hit the refresh fields when working in issue #5, so I can't say if they are there now because of that, or because of adding some fields manually first, a combination of the two, or if it's just one of those mystery items I'm reading about with sharepoint reporting.
7. Rows are being returned even though they have NULL values (so far anyway), and most data is returning nicely for the bulk of the columns I created in the list I'm reporting on. Here are the current issues:
A. I have one column in my SharePoint list that is multi-lined text. If the text type is either rich text or enhanced rich text, the value returned in the query is formatted like this: "<div class=ExternalClassyadayada<div>My notes display here". If I set the column to be plain text, this doesn't happen. I will need to figure out how to filter that for my report.
RESOLVED. David Wise had some code listed at http://www.sharepointblogs.com/dwise/archive/2007/11/28/connecting-sql-reporting-services-to-a-sharepoint-list-redux.aspx that addressed this issue somewhat. I modified it to match my circumstances. Disclaimer: I'm not a programmer, so use this at your own risk.
function ExtractMultiLineText(myField as string) as string dim strBegin as string dim strEnd as string dim myBegin as integer dim myEnd as integer dim myTextLength as integer strBegin = "<div>" strEnd = "</div>" if myField = nothing then return "" if myField = "" then return "" myBegin = Instr(myField, strBegin) + Len(strBegin) myEnd = Instr(myField, strEnd) myTextLength = myEnd - myBegin
if myBegin < 1 then return myField return mid(myField, myBegin, myTextLength) end function
B. I have two columns in the SharePoint list that are set as number values with 0 decimal places. When I query those however in SSRS, they return with the number plus like 12 zeroes behind the decimal. Not a major issue, but I'll put it on the list anyway.
RESOLVED. Used the Int() function; =Int(Fields!ows_myProblemNumber)
C. If I go to "/_vti_bin/lists.asmx?op=GetListItems", it appears from the sample soap output that I am allowed to ask GetListItems for is: listName, viewName, query, viewFields, rowLimit, queryOptions and webID. As I mentioned in issue #5, according to http://www.sharepointblogs.com/dwise/archive/2007/11/28/connecting-sql-reporting-services-to-a-sharepoint-list-redux.aspx, only listName, viewName and rowLimit parameters are usable(?) and query and queryOptions may not be working properly with SSRS.
So, if I can't put anything other than this in my query string;
<Query> <Method Namespace="http://schemas.microsoft.com/sharepoint/soap/" Name="GetListItems"/> <SoapAction>http://schemas.microsoft.com/sharepoint/soap/GetListItems</SoapAction> </Query> and I only have a couple parameters to pass on top of that, then it appears to me that my options for filtering the amount of data returned from the SharePoint list is to figure out a way to do it with expressions in the parameters or in the report itself. Am I missing something? Is this really all I get to work with out-of-the-box?
More to come...
================================== Installation steps taken to build the server VM: ==================================
(Using VirtualPC 2007) 1. Build OS (2003R2SP2) and promote to DC
1a. Create domain user service account SQLSPS 2. Prep for SQL
3a. Verify SSRS works 3b. RS config tool shows SP integration as blue exclamation 3c. Use service account SQLSPS for anything requiring Windows credentials 4. Install SQL2005 SP2
4a. Verify SSRS works 4b. RS config tool shows SP integration as blue exclamation 5. Prep for SharePoint
5a. Install .NET 3.0 6. Install MOSS2007 Enterprise and configure
6a. Webapps, SSP and anything else use svc acct SQLSPS 6b. Move Default website to port 8080 and re-activate (SharePoint stopped the site) 6c. Verify SSRS works on 8080 7. Install Reporting Services Add-in 8. Create new RS database in integration mode (with service credentials)
8a. RS config tool shows SP integration as red x 9. SP central admin /application management / manage integration settings
9a. reports server = http://srv1:8080/reportserver (since default port has been moved to 8080) 10. SP central admin /application management/grant database access
10a. using the FQDN, confirm servername and default instance - click OK 10b. Prompted for an account to use to retrieve information; svc acct SQLSPS did not work, domain admin did though 11. SP central admin / application management/set server defaults
11a. Accepted all defaults 12. Verify reportserver answers at http://srv1:8080/reportserver (via reportserver AppPool and DefaultAppPool) 13. Changed the application pool identity for the ReportServer AppPool from Network Service to the domain user service account I used for all SQL and SharePoint configurations (SQLSPS) and rebooted. The red x for sharepoint integration in the RS configuration tool is now a green checkmark.
There is a multi value parameter called "include" in the report where "Allow Multiple Values" is checked and it has 4 Available values as shown in the attached screen shots and preview of the report is also shown .There is no data set for this parameter and the values will get displayed on the report based on the visibility condition set in the report.Example : If first value is selected then 1 is passed and based on the visibility condition set in the report - the report output is displayed.None is default value and has value 4 and when the report is run with this option i.e. "None" then rest three parameter values are not applicable .
Requirement : -When the end user selects (Select All) Check box then (None) -check box must be disabled or must not appear for selection for the end user -When the end user selects check boxes either of the first three except None then also None check box must be disabled or must not appear for -selection for the end user -when the end user selects a combination of first three then also None check box must be disabled or must not appear for selection for the end user -The None is set as default with a value as 4 and is applicable only when the user does not select either of the first three values and the report will run.
We have SharePoint list which has, say, two columns. Column A and Column B.
Column A can have three values - red, blue & green.
Column B can have four values - pen, marker, pencil & highlighter.
A typical view of list can be:
Column A - Column B red - pen red - pencil red - highlighter blue - marker blue - pencil green - pen green - highlighter red - pen blue - pencil blue - highlighter blue - pencil
We are looking to create a report from SharePoint List using SSRS which has following view:
red blue green pen 2 0 1 marker 0 1 0 pencil 1 3 0 highlighter 1 1 1
We tried Sum but not able to display in single row.
I get the following error when I try to navigate to a report/model/data source, stored in a Sharepoint Document Library using a Sharepoint URL based on an Extranet or Intranet zone - but it works OK using the url for the Default zone:
System.Web.Services.Protocols.SoapException: The specified path refers to a SharePoint zone that is not supported. The default zone path must be used. ---> Microsoft.ReportingServices.Diagnostics.Utilities.SecurityZoneNotSupportedException: The specified path refers to a SharePoint zone that is not supported. The default zone path must be used.
Is this a limitation of the SQLRS-WSS3 integration or is there a workaround?
I am creating a report in SSRS which has the following criteria:
- Row 1 (parent) is 'Product'
- Row 2 (child) is 'Feed'
- Columns are date. I have 5 dates showing at any one time across the top. The date field is set up as a parameter so depending on the date the user selects, the report will show that date on the end column and then the 4 days prior to that in the other columns.
- Data is the number of records.
I have a sub total on the Product and the report is collapsed on Product as default.
What i'm stuck on is trying to insert a column at the very end that will show the variance between the last two dates. So the difference between the date the user selected (@date parameter) and the day before that.
Hi ! I have a problem,i have two reports in first report i shwo names of employers and in the second i show names of their employees and i've linked these reports with navigation but there is a problem becuse i want to show details of two or three rows together in second report,and i want to have check box for this,i need to use check box in preview mode in reporting services.How to have check box to select two or three employers ? Thanks alot. SHIARM
