Hi,
We have a product that is developed in ASP and works with SQL Server 2000 or 2005. Since it€™s an ERP, we also use Reporting Services 2000 or 2005. Our application needs 3 registered DLLs that were, a long time ago, developed to support our entire application.
Since we are using Windows Server 2003 x64 editions in our clients with SQL Server 2005 x64 edition, we managed to register the 32 bit DLLs in the 64 bit system. We installed them as a COM+ component, ran the command €œcscript.exe adsutil.vbs set W3SVC/AppPools/Enable32BitAppOnWin64 true€? and our application worked fine.
This command caused the IIS to use the .NET 2.0 32 bit version so that our DLLs could be correctly invoked.
But now Reporting Services doesn€™t work because it needs the 64 bit version of the .Net framework. When I try to connhecto to localhost/reports, I get the error "%1 is not a valid Win32 application".
Is there any workaround to this problem so that i can deploy the application and the database in the same machine?
I am trying to migrate my reports from SQL server 2000 reporting services 32bit to 2005 64bit. I am following the migration steps that MS specified. Restored my Reportserver and ReportserverTempDB databases Then I was using the configure Report services to upgrade these databases but I always end up getting the follwoing exception when I run the upgrade on the "Database Setup" configuration for 'ReportServerTempDB' database System.Data.SqlClient.SqlException: Could not locate entry in sysdatabases for database 'ReportServerTempDBTempDB'. No entry found with that name. Make sure that the name is entered correctly. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Common.DBUtils.ApplyScript(String connectionString, String script) at ReportServicesConfigUI.SqlClientTools.SqlTools.ApplyScript(String connectionString, String script)
It's driving me crazy, why is it looking for 'ReportServerTempDBTempDB' in the catalog instead of 'ReportServerTempDB'? Is it possible to migrate from 32bit to 64bit?
I'm attempting to obtain a cost effective solution for my existing customers to develop reports on their SQL 2000 Server installations using their Reporting Services 2000. With products like Visual Basic.NET 2003 becoming almost impossible to obtain, I have at least one customer who is running into a dead end.
One option possibly is the SQL Express with Advanced Services download, which has Reporting Services. My questions are as follows:
Can the report designer component of SQL Express Reporting Services be configured to connect to an external database (which would happen to be a SQL 2000 database) to establish its datasets? Does the resultant designed report end up in an RDL file? If the customer published this report via the Reporting Services 2000 Report Manager, would the report be able to run?
Sorry for asking a question like this that I could probably answer on my own, but my customer needed this answer yesterday. I have scoured the web and microsoft sites - and posted a question on the official SQL Reporting Services cateogy ... in an attempt to answer the basic question of how to design reports for Reporting Services 2000 in the absence of Visual Basic.NET 2003 (or other .NET 2003 tools) with no success.
I work in a big project and we will begin in using reporting services as the base technique for reports and I will be responsible for this part. but I have a problem I will discuss in the following:
Currently: We use currently devexpress reports and we have 2 languages(Arabic and English). the data in tables saved in two ways (Arabic and English). when the end user change the language of the web site the report data language changed when run it.
Example:
we have table with (ID, NAME_AR, NAME_EN, JobTitle_AR, JobTitle_EN). designed report will display(ID, NAME_EN, JobTitle_EN) . but the end user change the language of the system the report will
Hello, I need some major help, I need to make a database using SQL server for a forum, now I am using pHpBB, but i need that database. I was thinking about it, it doesnt need to be complicated or anything. I really have no idea where to start so any help. Thank you in advance
I have a new business, and a part of that business includes receiving large amounts of data from time to time. I just found out yesterday that I'm going to be receiving about 1TB of data from an new client! I'm not set up at all for this large of a data set.
I want to use SQL Server as my database. Can I load SQL on a Desktop PC without having to buy a server? How?
I don't have a clue as to how I need to get set up for this data...hardware or software. Any advice you can give will be outstanding!!!!!
I have a site that was supposed to go live yesterday.I am using M$ SQL Express 2005 and the Express Manager.I setup everything using Windows authentication on my local computer. I backed up the database through the manager and simply did a restore to the live database server.I copied my aspx files and everything else.I changed my connection string to allow for SQL Authentication (because I was having trouble with Windows authentication).For some reason, my SQL authenticated user can do whatever it wants within the SQL manager, but I am unable to login to the site. I get no errors, just the usual failed login attempt text.Can someone please help. I don't know where to start on this one.Thanks,Joshua Foulk
I hope I haven't messed up! I was importing some data, and it started taking too long and seemed to have locked up, I did a cold boot and when I tried to open the db it would just load...
I have then detached it and tried to reattach the db, but it seems to just load forever.. I let it sit there for an hour and still nothing...
the DB has a 17gig LDF file and I can't attach without it...
For some reason when I'm trying to restore a back up, I'm encountering this problem, I've asked numerous people and been in and out of chatrooms all day and night, has anyone got any idea what to do?
Our DBA has installed reporting services on a server and now in order to access the report manager, one has to be an Admin on that Server. I am guessing that there is a mistake in the configuration of Reporting Services. Usually it should allow anybody who was added to the roles in the properties section of the Report Manager, right? I have also added the users to the DB..
Also I am using Windows Authentication to access Report Catalog items (Reporting Services is installed on Server2) from a web Application(deployed on Server1) and displaying the report using report viewer. For some reason, server1 has to be in an Admin role on Server2 to access the report catalog/report. This is kinda strange for me as I don't want everybody to be an Admin on Server2. Can anybody please point in the right direction?
We have installed SQL Server 2005 with reporting services.When tried to open getting errors as below: how to avoid such errors See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
ReportServicesConfigUI.WMIProvider.WMIProviderException: A WMI error has occurred and no additional error information is available. ---> System.Runtime.InteropServices.COMException (0x8000000A) Â at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) Â [code]...
I have some problem about reporting service add-in.
After I install reporting service add-in for SharePoint, reporting service menu does not appear in Application Management Tab in SharePoint Central Administration.
I try to uninstall and re-install again, it remain not work.
Should I just pass an array of column names and use the AddWithValues SqlCommand method while looping through the array? Any comments are greatly welcomed.
I have created a database with three tables. The database has been up for a month now and contains about 20,000 records. In order to improve performance and resolve some issues I an attempting to change some of the table information. i.e. allow nulls in a few fields. When I use TSQL or the GUI to make these changes I get the following error: Timeout expired. The timeout period elapsed prior to completion of the operation or server not responding.
Source: .Net SQLClient Data Provider
I have SQL Server Express SP2 installed with .Net framework v3.0
Note: This issue appears when I attempt to delete a row from a table as well.
We've got a requirement to build the real time report. user can browse report at any point of time and need to see the latest data(stock market) in the report.
I've few options down...
1. Directly point to OLTP database as source and write stored procedure to show result set.
2. Replicate the database and write the SP's to reports. To avoid pointing directly to OLTP db.
3. To build the datawarehouse with dim & facts to show it in reports. I prefer this as a standard method, but this would have some latency depending on trasaction load which will differ from the requirement.
We are required to gather certain information regarding reporting services.
Which reports were requested, by whom , how long did they run for, what parameters were passed etc etc.
I see that the system tables do provide some of this information, is there a 3rd party tool or something we can use to gather all this type of information for us?
I have a report with a table and three columns. Whenever the data in one of the columns cannot fit on a single page it continues on the next page BUT, there is no header on the next page and the data in the other two columns repeats itself on the next page. (This behavior happens when I export to PDF)
Is this a known issue? I have tried every setting I could think of.
I have a horizontal barchart with integer values, both positive and negative. Major gridlines are shown and I have not specified the interval or the label format. Sometimes the gridline labels (Y axis) show decimal values. Is there anyway to format these? I have tried to format the labels as "#0" but then I see labels occuring twice. I have also played with the intervals, but then sometimes, depending on the values, the zero line is not being shown.
Hi, I have just install SQL 2005 SP2 and trying to get Window SharePoint Services V3 integrated with SQL 2005 SP2 reporting services. In SharePoint Central Administration, I select the Reporting Services Integration page and have setup the Report Server Web Service URL and Authentication Mode. I then goto Grant database access, specify the SQL server name, get promted for a username and password that has access SQL Reportserver and get the following error "The group name could not be found" Does anyone have any ideas? Thanks
We built our prod server [vm] with SQL Server 2008 R2 on Server 2008 R2. It works nicely. Then we made a copy of the VM and renamed it (so our test environment would be IDENTICAL to production). After that, SSRS was broken: I get "HTTP Error 503. The service is unavailable." I can't connect via http, or SSMS.
We have tried:
*Â Running SSRS config tool (several times)
* Running with/without the IIS Server Role
*Â Dropping & recreating the SSRS keys
*Â Recreating the ReportServer database, etc
*Â Checking all of the accounts, permissions, etc
*Â Running SQL Repair
*Â Going through the registry to fix any references to the machine's old name
*Â Uninstalling, reinstalling SSRS
* Completely uninstalling ALL of the parts of SQL Server 2008 R2, deleting all directories, removing references to SQL Server from the registry, rebooting, reinstalling everything.
None of this has worked. SSRS [R2] is still 503 on our test box.
the SSRS [NT] service seems to run, without error. The Event Viewer doesn't seem to be recording any errors. The SSRS logs say that the default URL is wrong, but we get the same error in Prod, and Prod works fine. The other SQL Logs say something about not being able to contact the service. However, as I said, the [NT] service seems to be working fine.
I think I've seen a similar post on a blog or on the forums - but it seems like this should be possible -
I have an MDX query - that works fine in SQL Enterprise Manager, and has my dimension members on columns, and my measures on the rows. When I try the same query in Reporting Services, I get the error:
"The query cannot be prepared: The query must have at least one axis. The first axis of the query should not have multiple hierarchies, nor should it reference any dimension other than the Measures dimension.. Parameter name: mdx (MDXQueryGenerator)"
Although it works when you pivot the view, I really need my data presented with the members on the columns and the measures on the rows. Another forum post mentioned using the SQL 9.0 driver, but I can't see this listed anywhere (the only one I see is the .NET framework Data Provider for Microsoft Analysis Services).
Here's what my query looks like -
SELECT { [Time].[Month].&[2006-09-01T00:00:00] , [Time].[Month].&[2006-10-01T00:00:00], [Time].[Month].&[2006-11-01T00:00:00], [Time].[Month].&[2006-12-01T00:00:00] } on COLUMNS, { [Measures].[Unique Users], [Measures].[UU Pct 1], [Measures].[UU Pct 2], } ON ROWS FROM [Cube]
I'm trying to create reports in RS2005 using AS2000 as my data source. I understand that if I use RS2005 on AS2000, I wont be able to enjoy the OLAP based parameters as in using AS2005. Does anyone know an easy way to easily use Parameters in RS2005 while still using AS2000?
I'm using Reporting Services 2005 SP1 and wrote some code to render reports server-side. My sample report has few parameters that must be passed so I pass these parameters with code.
byte[] report = rs.Render("PDF", "<DeviceInfo><Toolbar>False</Toolbar></DeviceInfo>", out extension, out mimeType, out encoding, out warnings, out streamID); </My code>
Actually, I have several more parameters but I've checked the collection and all the parameters I want are there and have values. Their names match those found in executionInfo.Parameters. But when I run my code I get the following error on Render():
<Error> "This report requires a default or user-defined value for the report parameter 'pClass'. To run or subscribe to this report, you must provide a parameter value. ---> This report requires a default or user-defined value for the report parameter 'pClass'. To run or subscribe to this report, you must provide a parameter value. ---> This report requires a default or user-defined value for the report parameter 'pClass'. To run or subscribe to this report, you must provide a parameter value." </Error>
I've double-checked and my parameter array does have the problematic parameter, I passed it a value but when I check executionInfo.Parameters I see that it's the only parameter that hasn't been give a default value after calling SetExecutionParameters(). So my parameters do seem to be passed but one seems to refuse getting a value. If I comment out the SetExecutionParameters() line I get, as expected a similar error but on another parameter (first one in the executionInfo.Parameters collection). So I'm left to beleive that the SetExecutionParameters() has some kind of bug as it works for all but one parameter. I've checked casing, spelling, tried passing phony parameters and from what I've seen I should be getting an error when I pass the parameters if I got something wrong.
I am invoking RS web services to render reports, using Apache Axis to generate stub classes from Reporting Service WSDL.
Please let me know if I can integrate Report Viewer control in the jsp where I am writing the report output. Else do I have to create my own custom tags simulating ReportViewer functionality.
My requirement for the parameter is multivalue parameter with a text box. for example when user enters aa15 it need to include product aa15. when the user enters aa15, aa16, zz15 than it needs to include all the three products. the last case is when the user enters AA** than i need to inclued all the products start with AA. when i use default multivalue parameter with data source analytical services than i am getting a drop down box. I dont want that. I need a text box where user can enter the value. 1. In sql we have a like key word to query . for example select * from product where product like "AA%". what is equavalent mdx query to get such results ? 2.How to impliment the multivalue parameters without using dropdown box?
I am facing sever Refresh issue in PPS Reports. I have Two Dashboard
Dashboard_One and Dashboard_Two
I have few Filters on both the Dashboard .
In Dashboard_One I have 2 Filters
1)Year filter where Year 2012 is my Default value 2)City Filter where "CityOne" is Default Filter Value
If I select Year"2010" in Period Filter and "CityTwo" In City Filter.I see Related reports . Now I navigate to Dashboard_Two to See Other Reports where I have few Other Filter Like "Country" where I select "CountryThree" . When I navigate Back to Dashboard_one I do not see Dashboard with Default value given to them
I still see Filter value Year=2010 and CountryFilter="CountryTwo" in Dashboard Dashboard_One .. where as I should have seen it based on the Default value given to the Filter.. How should I resolve this refresh issue which I am facing in PPS Dashboard. I do not see Default value in the Filter ,It always give the filter value which was selected later when Navigated back.
I'm trying to insert data into locally stored database (SQL Server). The data I want inserted, is presented in a Treeview control and the data is fetched from a Webservice. The data is returned in form of a dataset. The treeview contains checkboxes allowing a user to select what to install in the locally stored database.
To sum up:
1. Get data from a webservice' not my problem 2. Present data in a Treview control' not my problem 3. Allow to user to select which data to install' not my problem 4. Insert data that the user has selected into my db' MY PROBLEM!!!!
The Treeview is generated with DataRelations between Group and Rule.
My locally stored database is designed by a third party provider and therefore the database must not be altered. The table I want to store data in is called "Groups" and it looks like this:
GroupID uniqueidentifier ' (newid()) GroupName nvarchar(50) ParentGroupID uniqueidentifier' if grouptype = 0 then ParentGroupID must have a value. GroupType tinyint ' 0 = subgroup, 1 = "top"group
The third party also created a stored procedure called pr_AddGroup taking the following parameters:
@GroupName ' can be both the RuleName and the GroupName @GroupType ' can be 0 for subgroup or 1 for "top"group @ParentGroup ' GUID
The problem with this stored procedure is that it does not have return value, which is here my problem actually lies. If it returned @@IDENTITY I could use this as the parameter for @ParentGroup. Instead I figure I must create two sqlCommand's (one calling pr_AddGroup and another calling SELECT @@IDENTITY to get the newly created record).
My SQL Commands look like this
Dim cmd As SqlCommand Dim Conn As SqlConnection = New SqlConnection Conn.ConnectionString = "Data Source=myServer;Initial Catalog=myTable;Integrated Security=SSPI" cmd = New SqlCommand cmd.CommandType = CommandType.StoredProcedure cmd.Connection = Conn cmd.CommandText = "pr_AddGroup"
dim cmd2 as SqlCommand cmd2 = new SqlCommand cmd2.commandtype = commandtype.Text cmd2.commandtext = "SELECT @@IDENTITY as ID FROM Groups" cmd2.connection = Conn
dim ParentGroupGUID as system.guid
To get the data inserted in the Groups table I would something like the following, but the code is very ugly (and it doesn't work either);
For Each Group In TreeView1.Nodes ' Loop through Groups If Group.Checked Then cmd.Parameters("@GroupName").Value = Group.Text.ToString cmd.Parameters("@GroupType").Value = 1
For Each Rule In Group.Nodes ' Loop through Rules. If Rule.Checked Then cmd.Parameters("@GroupName").Value = Group.Text.ToString cmd.Parameters("@GroupType").Value = 1 cmd.Parameters("@ParentGroup").value = ParentGroupGUID cmd.ExecuteNonquery() End If Next Next
I've spent the last 5 hours figuring out this problem, so ANY help is appreciated :-)
I have a perl program that is looping through a hash of a hash. I need to Update any existing records but also insert any new records in the table using collected data in the hash.
Life would be very simple if it was possible to use a Where Clause in an Insert statement but not does not work.
Here is some example code from my program: sub Test{ foreach my $table(keys %$HoH){ foreach my $field(keys %{$HoH->{$table}}){ if($table eq "CPU"){ my $CPUstatement = "INSERT INTO CPU(CPUNumber, Name, MaxClockSpeed, SystemNetName) Values ('$field', '$HoH->{CPU}{$field}{Name}', '$HoH->{CPU}{$field}{MaxClockSpeed}' , '$HoH->{Host}{SystemNetName}')"; print "$CPUstatement"; if ($db->Sql($CPUstatement)) { print "Error on SQL Statement"; Win32::ODBC::DumpError(); } else { print "successful"; } } }
I had a problem today where I could not see column names and alltables had a _1 after them when viewing a Sql Server view inEnterprise Managere.g.TableName Company when added to the view would be named Company_1 andthe only columns available were 1 which was *(All Columns)After looking through the news groups I saw several occurrences ofthis problem but no answers that gave a fixAfter some investigation I found that it is caused when the databasename in SqlServer has a . in it!Test1 >> Fine the view designer works fineTest1.6 >> Problems as listed aboveI don't see why Enterprise Manager allows database names with .'s ifit is going to create such problems.
I started my Reporting Server and if I use the Internet Explorer as a Administrator everything works fine.But if I don't open it as an admin it calls "rsAccess Denied The user [...] does not have the permission...".Problem is that I want to run it in an SAP Program with an HTML Viewer. how I can get those Permissions ?By the way somehow I'm not able to create or change roles in the Microsoft SQL Server Management Studio.
