@partno is defined a multivalue parameter.when I enter a single part number or leave it empty data is properly returned.when I enter multiple part numbers data is not returned. I have tried: 604-02394, 604-03492 in the parameter prompt.I have tried entering those parts on separate lines in the parameter prompt:
604-02394
604-03492
my sql query : and (fpartno in (@Partno) or '' in (@Partno))...I only want to see those two parts in the report.
my dataset from sharepoint list. and this dataset value assign to parameter. i want when no any parameter is selected than it should filter like "ALL". when i select alow null value it give me prompt error you can not select null in multivalue parameter.How can i do it. i am using share point list.
I am trying to test the concept of passing multi value parameters from one report using the Action Property of a textbox to open another report is a new Window with the Multi Value parameter values already passed. The test involves the following:
Report 1:
1. Multi Value Parameter @ReportParameter1 has three Values: Value1, Value2, Value3
2. Has a text box with the Action Property set to Go to URL with the following Expression: ="javascript:void(window.open('http://reportserver/Reports/Pages/Report.aspx?ItemPath=%2fReports%2fReport2&rs:Command=Render&ReportParameter1=" + JOIN(Parameters!ReportParameter1.Value,"&ReportParameter1=") + "'))"
Report 2:
1. Has Two Parameters @ReportParameter1 and @ReportParameter2
2. @ReportParameter1 has Available Values as follows: Value1, Value2, Value3
Does not have any default Values.
When I click on the textbox on Report1, it does navigate to Report2 but none of the Values are being set.
I have a multi value parameter called "Location" and this depends on another multi valued parameter value. The default value for the parameter "Location" comes from the another another multi valued parameter. Now say when the default value is set for the parameter Location like the below:
The Location parameter data set has values from the Query and default values has been set as shown below:
I have a requirement for the following SSRS expression ( I am using Report Builder 3.0). The end user will input a selection via a mutli select parameter (financial month/s), if all month are inputted then sum(Field1.Month1.value...Field12.Month12.value )/12 * 100 else if parameter.value =1 then sum(field/s.values for selected month)/1 *100 else if month.values = 1 AND 2 then sum(field/s.values for selected month)/2 *100 and so on for any combination of the selected inputs.
Put in simpler terms I would like to calculate a percentage from a field/s containing relevent values, based on month/s the user inputs.
I have a problem with multi-value parameter in ReportingServices2005, hope to find a solution here.
if I use ordinary parameter in a report(multi-value checkbox is not selected), after deployment I can click on drop down list and type possible value of that parameter using keyboard(it will be selected from what i typed).
if I use multi-value parameter somewhy it doesn't respond to anything i type from my keyboard.
Why is that? What should i do to make that multi-value parameter select possible result from what i type?
In an existing SSRS 2012 report, I have a requirement for a user to be able to select by multiple school(s) and/or multiple grade(s). This is fine except certain schools like elementary have grade levels of KG to 06, Middle school has grades of 06 to 09 and high school has grades of 10 to 12. Thus for example, if a user has initially selected grades 11 and 12 and then they select an elementary school that has grades KG through 06, the 'grade level' selection would need to change.In other words, I am thinking of initially having the available and default values for the parameter called 'Grade' set to KG through 12. However if a school is selected that only has specific grade levels like elementary school, how can I override the original grade level and only allow the user to select grades that the particular school contains?
I am using SSRS 2008 R2 Report Builder 3.0 (10.50.4276.0) . I have simple set of data which has a persons Title and Name e.g. Mr Smith, Miss Jones, Doctor Foster
The report has a parameter where the user can select which records to show based on the matching titles (Mr, Miss, Doctor)
The Query for the report uses Title in (@Title) where @Title is the only parameter which can take multiple values. The report works correctly for any 1 value selected, but as soon as 2 or more values are ticked in the drop down, it fails.
I believe the parameter value is being passed into the query with a comma separating the values e.g. Mr,Miss which causes the IN statement to give an error, as the statement would be where Title IN ('Mr,Miss') which does not match any of the data values.
The parameter value passed needs to be 'Mr','Miss' for the IN statement to work. What statement do I have to put in the report query to get it to select any of the data rows where the title matches any 1 of the selected values?
I have a report with a subscription enabled and the default values that are selected for the report frequently change. I have our report server locked down so that the users can't change the defaults, but I now want to empower them to maintain this on their own. Here is my dilemma. When you have the available parameters set up to pull from a query, the defaults on the report server have to be keyed in manually, which is not an option. The only way to get a check box there, is to explicitly specify the available values.I need my available values to be database driven and I need to be able to select my defaults on the report server using check boxes.
I am creating a SSRS report using a SSAS cube as it data source. The user would like to select multiple values from a reporting parameter that is then used as a filter on the MDX statement. I am bale to have the report work successfully when only one value is selected but not when multiple values are selected; the report uses only the first value from the reporting parameter when it contains multiple values. How do I filter an MDX query using a SSRS report parameter with multiple values?
Result (While I am selecting 'Yes' in dropdown) ---------------------------------------------- incident_id usr_id item_id 10059926 191 61006 10054444 222 3232
SELECT incident.incident_id,incident.usr_id,incident.item_id FROM incident where exists (How i can write query here to check the act_type_sc=ADD_ATTCHMNTS is exists)
There is a multi value parameter called "include" in the report where "Allow Multiple Values" is checked and it has 4 Available values as shown in the attached screen shots and preview of the report is also shown .There is no data set for this parameter and the values will get displayed on the report based on the visibility condition set in the report.Example : If first value is selected then 1 is passed and based on the visibility condition set in the report - the report output is displayed.None is default value and has value 4 and when the report is run with this option i.e. "None" then rest three parameter values are not applicable .
Requirement : -When the end user selects (Select All) Check box then (None) -check box must be disabled or must not appear for selection for the end user -When the end user selects check boxes either of the first three except None then also None check box must be disabled or must not appear for -selection for the end user -when the end user selects a combination of first three then also None check box must be disabled or must not appear for selection for the end user -The None is set as default with a value as 4 and is applicable only when the user does not select either of the first three values and the report will run.
I have a problem with report built in SSRS and deployed with Dashboard Designer to Sharepoint. There are few filters connected to report, 2 of them are multivalue. Regardless of data returned, when I select too many items in filter, the report is getting super small. It doesn't matter what you select, size changes when you select exact number of items or more. I replaced report with single line (filters where still conected) - result was the same. Small amount of items selected:
More items selected:
Size of the raport in Dashboard Designer is set to "Percentage of dashboard page", when I selected autosize, result was the same.
I have created a menu report listing available reports and am setting the Jump to settings of each text box in the list to take the user to the relevent report. But I am having a problem setting up drill down to reports with multivalued parameters.
What I want to happen when the user drills down is for the report to open up with no parameter values selected. This works for single value parameters where I have set Null as the default value. But I have not been able to figure out how to do this with MVPs. Does anybody know if this is possible?
As a workaround I have been using Jump to URL (rather than Jump to report), which has no problem opening the report without having to pass any values for the MPV. But I do not like using this as I use different DEV/UAT and PROD environments so would have to amend the URL for each environment.
Seems like this should be possible... Any idea?
Cheers, Mike
PS: I should add I can Jump to reports with MVP without specifying a parameter in development studio but not when the report is published.
I have two report , first is main report which is matrix and have one parameter User_ids which is multi value selection and my second report is basic chart of user_wise performance.
Now, my main report (matrix ) works fine for Multiple selection of users and i have putted one textbox on main report chart which has action properties set for chart report, when user click on chart button it must goes to chart with user selected in main report. Now , i have used expression for parameter to send it like ..
=join(parameter!user_id!value,",") which pass selected value to chart
And when I am selecting single user it passing that value to chart parameter list but , when it is more than one user it errors with conversion failed when converting the nvarchar value '121,128' to data type int. But my chart also works when passing 121,128 in user parameter in preview of report .
I am using reporting services 2012, Can we make visibility of report parameter dynamic, ie can we make parameter visible or hide on certain condition or its visibility depends on other parameters Is this feature available in any other updated version of ssrs?
I have a report parameter called para1 which is a drop-down list and what I want to do is display another report parameter based on the para1 selection.
So for example, para1 contains a, b, c choices. if a user selects b, I would like para2 to display but if the user selects a or c, I don't want the para2 to display.
Using SQL Server 2008R2 and Report Builder 3.0..I have an action set in a text box of a table. My intent is to pass the value of that text box (which is variable) to a sub-report in a popup window. Here's my code: URL....The parameter of the report I'm trying to open is @SONum.I'm guessing my error is involved in the formatting of how the value of the parameter is being passed. I've also seen examples where the report server and report values were parameterized, but I don't know where to define
Parameters!ServerAddress.Value anywhere.Do I need to have something set up a certain way within the report I'm opening? Here's the report Parameter settings on the report I'm trying to open.
I have a dataset listing distinct values for items (like 1, D10, M4, etc.) The WHERE statement in my query refers to unit IN(@Unit). I then have 2 report parameters to select 1) a date (datetime); and 2) a multivalue parameter to select one or all of the "units". I would like the second parameter to default to "Select All". Can someone tell me how to do this? I'm sure this is a fairly simple thing but I am really struggling. The report parameter is set as multivalue; My "available values" is set to "from query" and refers to my "unit" dataset and the value and label fields are set to "unit" (only field I bring into this particular dataset). The "Default Values" section is set to "from query" , the dataset is set to "unit" and the value is set to "unit". I can preview the report and select a date but the list of units comes up with all boxes unchecked, including "Select All". Any help will be much appreciated. Thanks.
I'll go to a dataset, open up the query designer, add a new parameter, then refresh the fields, but the parameter won't be added as a report parameter. If I go to the dataset properties under the list of parameters, the value in the dropdown will be blank. However, sometimes this will automatically add.
Is this a bug in Visual Studio? How do I get around this?
I have a situation in SSRS to get the common values between the two columns where the values are sorted comma separated as below.Ex:
ColumnA : abc,cde,efg ColumnB : cde,xyz,abc
the result in
ColumnC : cde,abc
similarly Column A and B will have n number records. I need to right an expression or the Code function to get the required result in ColumnC. I am using SharePoint Lists as Datasource. Cannot write SQL query to achieve this requirement.
I am SSRS user, We have a .net UI from where we want to pass multi select values, but these values are comma separated in the database. how can I write a sql query such that when I select multi values on my UI, the comma separated values are take care of.
We have a report that has a banner page. The user can select categories from a multi-select parameter and then this is passed into the report as a csv file. The actual report works doing this, however, we need the banner page to use this parameter's value (the multiple selected labels) to display a string of the selected values. For the textbox expression, we are using =Parameters!Cat.Value, but it always wants to reference Paramaters!Cat.Value(0). We were thinking of using a function in code to pass in the parameter and then concantenate each value into on string and return that string, but isn't there an easier way to do this?
I have passed a list of parameters to a multivalue parameter in a SQL Report.
I can click the drop down and see the list of parameters that were passed.
In my select statement for the report, here is the condition I am using in the where clause.
AND (SUBSTRING(C.CHARTOFACCTSACCOUNTNO,9,3) IN (@RUs))
Nothing is returned in the result set if more than one value is passed to the multivalue parameter.
Shouldn't the above conidition have the effect that no matter how many account numbers there are, the last three digits in the account number will be compared to each element in my multivalue parameter and if there is a match, it will be selected on the report.
For example, in the multivalue dropdown list, there are the following values:
211
212
If I pass 211 to the report, data is returned. If I pass 211, 212 to the multivalue parameter no data is returned.
I have multivalued parameter in my report. I have text box to display heading of the report. the report heading is dependent on the parameter selected.
with single value parameter the text box displays the correct parameter but it cannot with multi valued parameter. Is there any way to display the last value of the parameter in the heading of the report in case of multivalued parameter?
Ex. multivalued parameter is "YEAR"
my report shows the data for 3 years say 2003,2004,2005. report header should show 2005(last of the parameter list) report.
I have in my report a text box that lists the user selection. When the user select a few of the values I display the selection but when the user select "All" I would like the text box to say "Parameter: All".
Is there anyway to know if "All" was selected, I don't want to list all the values because sometime there are too many of them.
Is there an easy way to handle a multivalue parameter where the values could have comma's? I have County and State in a single column and want to select one from the multivalue parameter but when the string is passed it is not being found because I am parsing the parameter on comma. Here is what the drop down list looks like.
In SQL Server 2005 reporing services, I am using the syntax in the documentation for a multivalue parameter.
AND c.Track IN (@Track)
It works fine when I just select one value, but if I select 2 or more, I get an error about the commas being wrong. Is the syntax correct? Is there a way I can see the SQL generated by the report so I can see what is wrong?
There is a select all option for each multivalue parameter. If this option is selected, I would like to display in the report that the parameter selected is "ALL" instead of using the Join(parameter!parametername.value,",") to display all the values. Any idea how I check to see if the select all at the beginning is checked?
Everything I have read says that this is possible in Oracle 9 and greater versions, but I can't get it to work...
Here is my query:
select * from employee where employee_id in ('111','222')
This works fine in the data tab until I replace the values with a parameter. I get the pop-up to enter the parameter values but no matter how I enter them, I don't get any rows returned. I've tried entering them as '111','222' and as 111,222 and changing the parameter type from a string to an int, but nothing seems to work.
I am running this on SQL Server RS 2005 and my Oracle driver (Oracle in OraHome92) is version 9.02.
I am using stored procedure dataset. i tried filtering the dataset values with the parameter of type datetime.I am able to view and select multiple datetime value from the list. but its not filtering the values.
i changed the parameter datatype to string but it works only for the first value
(parameter. <pname>.value(0)). if i filter with the array value (parameter. <pname>.value) am getting error (Failed to evaluate Filter expression).
I guess the problem with datatype. Pls help me if anyone have idea about this.
