Reporting Services On A Workgroup Based Network?
Feb 28, 2007
Can I use Reporting Services 2005 in a workgroup to serve reports for a windows application which is distributed accross the network?
I've already tried but when the application on a client pc requested a report from the report server i got a message about not having enough permissions to see the report. The windows application was builded using VB .NET 2.0 and VS2005.
The report server instance is installed on a server 2003 enterprise along with the SQL Server 2005.
If this is possible how can set permisions or make my application to be able to requests and show reports?
Thanks a lot to anybody who takes the time to answer.
Antonio Alfaro
View 1 Replies
ADVERTISEMENT
Apr 10, 2007
I have a WORKGROUP network with 2 SQL Server 2005 servers. I want to configure for log shipping.
When I try and set up the 'Secondary Database Settings', and try and run the process, it gets an error saying it cannot access the backup file (the secondary cannot access the backup file on the primary). The file is there. It is shared. I have created local accounts on both machines called 'SyncAccount', and have given full control over the shared directory (on the primary) and local directory on the secondary. I have chaged the SQL Agent to use the local account.
TITLE: Microsoft SQL Server Management Studio
------------------------------
SQL Server Management Studio restore database 'ISC'
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (SqlManagerUI)
------------------------------
Cannot open backup device '\FAtBOYISCISC.bak'. Operating system error 5(Access is denied.).
RESTORE FILELIST is terminating abnormally. (Microsoft SQL Server, Error: 3201)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=3201&LinkId=20476
I have tested access for the created user by doing a "runas" from the command prompt.
I have invested hours in this. I have found several relevent artcles, but have not found the answer.
What is wrong with this thing?
View 3 Replies
View Related
Jun 18, 2007
I am using SQL Server 2005 Express Edition. I am planning on upgrading to either Workgroup or Standard edition. While working with Express Edition I did find out that this version does not support backup to a network drive.
My question is:
Is it possible to backup directly to a network drive using a Workgroup/ Standard edition of SQL Server rather than backing up to a local drive and then 'copy and paste' to a network drive like the Express Edition.My other question is :
Given a database limit of 50GB, which one of the editions, Workgroup or Standard, will be appropriate for use.Thank you for your time and patience.
Regards
Berly Sam
View 4 Replies
View Related
May 19, 2015
Previously I was using SSRS to create a local website(native mode) for our domain users to access. I wonder whether it is possible to share the website to outside users(just like youtube, everyone can access it). Is there a possible way to achieve that?
View 3 Replies
View Related
Aug 30, 2006
Hi,
I am new to SQL Server and I am trying to install SQL Server 2005 Express or Stnadard Edition on a computer runing XP pro on a XP's workgroup network using a router. Can I access the the database from another computer running XP pro on the same network? If I can, what setting do I need when installing SQL 2005 in order to do this?
Any help is appricated.
View 1 Replies
View Related
Oct 30, 2007
I would like to know if it is resonable and acceptable to make reports created through SQL Server Reporting services available through our Public facing applications.
Also, what are the potential problems? Security? Impact on the SQL Server? Limit to specific types of reports?
If anyone has any info it would be greatly appreciated, I am a big fan of SQL Reporting but we are unsure if we are going to be able to use the reports on the Public side and we don't want two separate sets of reports (internal and Public).
Thanks in advance.
Terry
View 6 Replies
View Related
Jun 9, 2015
My Report service account, by default "Network Service" in the config manager.
some of my onsite people my mistakenly changed the SSRS service account to the "Local system".
when I am trying to change it back, Manager is ask to create the dialog box 2(encrypt key) given below...
When try to create the encrypt account , report server is stopped working..I had changed the properties of the reporting services also..
View 3 Replies
View Related
Nov 18, 2015
I need to hide a row based on a value but show it for the rest of the values! this is the expression i am using for the first row is
=IIF(Fields!QuestionRef.Value = "1.2" or "2.1" or "10.2" or "20.2" or "23.2" or "30.1", true , false)
And for the second row
=IIF(Fields!QuestionRef.Value = "1.2" or "2.1" or "10.2" or "20.2" or "23.2" or "30.1", true, false)
But it either hides the row for all values or shows it for all values.
View 5 Replies
View Related
Oct 9, 2015
I am using SQL server 2012 and Report builder 3.0 to build my report. I have build a report which product the following table
What I try to achieve is to add 2 calculated field at the bottom of the table which will represent 2 Total value based on a condition
OutTotal field should show the SUM of the Quantity only for ItemStatus=0
InTotal field should show the SUM of the Quantity only for ItemStatus=1
IMPORTANT : I cannot group my data because I need to shown them in a time Wise flow
I have try to insert the first field and define an expression but it gives an #Error. The expression I used is as below
=SUM(IIF(Fields!ItemStatus.Value = 0, Fields!ItemQuantity.Value*Fields!ItemUnitWeight.Value,0))
The Quantity filed in my table is calculated from expression Fields!ItemQuantity.Value*Fields!ItemUnitWeight.Value
View 2 Replies
View Related
Oct 9, 2015
If I want to select a value from a certain row in my Dataset.
I have a dataset called labels in my Report. in this data set I have diffrent row and in each row I have a label with an
ID. For example:
ID Text
TEXT0001 Hi
TEXT0002 Good Morning
TEXT0003 Good bye
Is this is the right way to get the second row?
=First(Fields!ID.Value="TEXT0002", "Labels")
View 2 Replies
View Related
Jun 30, 2015
I'm working on a scheduling report to display work to be completed on each day. I have each day iteration as separate subreports by adding day values to "Today()" I'm trying to hide subreports that return as Sat or Sun.
Here's what I'm using to define my WeekDayName=WeekDayName(Weekday(DateAdd("d",1,Today())),True,0)
What I would like to do is =WeekDayName(Weekday(DateAdd("d",1,Today())),True,0) = 'Sat' OR WeekDayName(Weekday(DateAdd("d",1,Today())),True,0) = 'Sun' but I get an error when I attempt that.
I'm entering this under Sub-Report Properties - Show/Hide based on Expression using Report Builder 3.0.
how I can achieve this?
Using Report Builder 3.0 on SQL 2008 R2
View 3 Replies
View Related
Nov 4, 2015
I am trying to get 3 report parameters working to show 3 different tables.
table 1 = Area 1 data
table 2 = Regional Area 1
table 3 = Stores in Regional Area 1
Currently I am working on the biggest one. E.g. if all 3 parameters have information in them, then you use table 3. I have written out the coding as the following
=iif(isnothing(Parameters!Area.Value),True, False ) and
iif(isnothing(Parameters!Regional.Value),True, False ) and
iif(isnothing(Parameters!store.Value),True,False)
But it errors stating end of statement expected. What I have missed or not done here?
View 5 Replies
View Related
Aug 21, 2015
I am trying to use SSRS to allow users to select any one or several columns from a set of cascading parameters which will then do a "data dump" of the contents of the selected columns for "export".I know how to do cascading parameters, but I am having problems coming up with a way of using the parameters to dynamically build a matrix which has as its columns the list selected in the parameters. I need the user to choose WHICH columns will be displayed. There could be 1, 2, 3, up to 50 columns.
View 2 Replies
View Related
Jun 15, 2015
I have an issue in trying to format rows base on conditions. Below is a replication of the tables and the select statement.
CREATE TABLE #CompareVal
(CompareValID INT Not Null
, ValName NVARCHAR(75) Null
, Vehicle INT Null
, Driver INT Null
);
GO
[Code] ....
First issue, James and Jane does not have a driver available and that should show "No Driver available"I am to compare values in VehicleAvailable and DriverAvailable to the first row - (Group Value Standard row) so that when a value is less than the value in first row, it should be Gold, if equal to, Blue and if greater than then, Red.
The first row is to be Black. In other for me to be able to compare, I added columns like so:
SELECT #CompanyName
, [Description]
, ISNULL(CAST(VehicleAvalible AS NVARCHAR(30)),'N/A') AS VehicleAvalible
, ISNULL(CAST(DriverAvailable AS NVARCHAR(30)),'No Driver available') AS DriverAvailable
, 0 AS TotalVehicles
, 0 AS TotalDrivers
[Code] ...
And my expression for "VehicleAvailable" column is :
=Switch(Fields!Description.Value = "Group Value Standard" AND Fields!VehicleAvalible.Value = Fields!TotalVehicles.Value, "Black"
, Fields!Description.Value = "Group Value Standard" AND Fields!VehicleAvalible.Value < Fields!TotalVehicles.Value, "Black"
, Fields!Description.Value = "Group Value Standard" AND Fields!VehicleAvalible.Value > Fields!TotalVehicles.Value, "Black"
[Code]....
This doesn't work as I am comparing integer against text value. How do I format to get result like the below image?
View 6 Replies
View Related
Jun 15, 2015
I am working on SSRS. Based on parameter value I needs to call the related view. Below are my current expression query. but it has some error.
=IIF(Parameters!RacServiceOfferingsOnly.Value=0, SELECT * FROM VW_FLIGHT_SHEET_SUMM_RAC_N WHERE "TransferDate" BETWEEN DECODE(:StartDate,NULL, "TransferDate",:StartDate) AND DECODE(:EndDate,NULL, "TransferDate",:EndDate) AND
(:TransferType IS NULL OR :TransferType = "Direction"),SELECT * FROM VW_FLIGHT_SHEET_SUMM_RAC_Y WHERE "TransferDate" BETWEEN DECODE(:StartDate,NULL, "TransferDate",:StartDate) AND DECODE(:EndDate,NULL, "TransferDate",:EndDate))
View 2 Replies
View Related
Aug 5, 2015
I have one requirement. We have one application in banking and they have developer that application using c# and .Net code so For Business Users--when they enter their details and when they want to check Reports--it should take to a another UI or web page where Users will see all the reports--- and clicking the report he/she should be get able to export it into different formats..
i know that we can give report manager URL--but due to various issues-- we have choosen to built a web[age where they can see the reports work-flow:
so--user opens bank site--enters his details-goes into reports--it should open new webpage or UI, he should see all reports--he should export these reports..
After that based upon security levels each user can see their individual reports.
View 2 Replies
View Related
Oct 2, 2015
I am producing a report in Report Builder 2 containing a chart and table. The user is able to select single or multiple choices on a parameter called Specialty. My present chart is only suitable when one Specialty is selected. Therefore I only want this to be visible when the user has selected one Specialty. I am planning to create a second chart which is suitable for than more than one selection. So if the user selects more than one Specialty the existing chart will not be visible and instead will be replaced by the second.I think this should be done using Chart Properties>Visibility but cannot develop the logic of the expression.
View 5 Replies
View Related
Jun 22, 2015
I have some duplicate values for my query results, about 200 duplicates out of 30000 rows. Of these 200 duplicates I want to keep the ones that have a higher value for... 'UpdatedBatchID'.
SELECT
IR.Id as 'ID'
, CAST(IR.Priority as varchar) as 'Priority'
, IRSupportGroupDN.DisplayName as 'Support Group'
, DATEADD(MI,DATEDIFF(mi,GETUTCDATE(),GETDATE()),IR.CreatedDate) as 'Created Date'
, DATEADD(MI,DATEDIFF(mi,GETUTCDATE(),GETDATE()),IR.ResolvedDate) as 'Resolved Date'
, SLOConfig.DisplayName as 'SLO'
, DATEADD(MI,DATEDIFF(mi,GETUTCDATE(),GETDATE()),SLOFact.TargetEndDate) as 'SLO Target'
, SLOStatusDN.DisplayName as 'SLO Status'
, SLOMetric.DisplayName as 'SLO Metric'
, SLOFact.UpdatedBatchId as 'UpdatedBatchID'
View 11 Replies
View Related
Nov 20, 2015
I need to hide a column just for certain values from a table like contract decorators I tried using
=IIF(Fields!MainTrade.Value = "Contracts Decorator, Bricklayer", True, False)
But it just hid the column for all values, then i tried this but it doesn't seem to work (Think it's not correct though)
=IIF(Instr("Contracts Decorator, Bricklayer","," & Fields!MainTrade.Value & ",") > 0,true , false).
Below is the table and the highlighted column i am trying to hide just for those two fields. The table has a page break so that it would be displayed on a different page for each value, but i'm not sure it is possible as i have only done it for integers and rows before.
View 16 Replies
View Related
Nov 4, 2015
I have an RDL report that has tables which are hidden based on expression. When I chose Run, they are appropriately hidden or visible. However, when I chose print, all tables are printed, even if they are invisible in the run version.
View 14 Replies
View Related
Oct 21, 2015
I have the below script to create directories based on my select statement.
create table students
(
f_name varchar(100),
l_name varchar(100)
);
insert into students values ('John','Smith'),
[Code] ...
The result I am getting is truncating the directory names as in the below:
View 4 Replies
View Related
Jun 9, 2015
I need to send a report to various email id based on parameters.
I have a report which has a dropdown which shows the list of parameters. I need to send report to 3 different email ids with different parameters. How to do that?
View 6 Replies
View Related
Sep 30, 2015
I have below report with following data
Date Count
April-2015 100
January-2002 30
November-2010 55
July-2000 10
What is the best approach to sort this data based on date in a tablix and also sort the date in Column bar chart?
View 4 Replies
View Related
Sep 10, 2015
I thought the built in expression Level() would show me be drill down level. I can't see to get that to work. I'd like to determine my drill down level so I can hide columns based on that.
View 2 Replies
View Related
Jul 9, 2015
I need to set a field value based on two date time parameter's.What is the correct syntax to allow me to pass the value into the field in my SSRS expression ?
=IIf(Parameters!EndDate > Parameters!StartDate.Value, "Overdue")
View 3 Replies
View Related
Oct 19, 2015
I have 2 tables in my report, a multi value parameter (tp_title) is passed to the report. I am trying to hide the first tablix with this expression in the visiblity option of the tablix properties.
=IIF(Parameters!tp_Title.value = "Financial Years" or Parameters!tp_Title.value="ALL", False,True )
I get the error: The Hidden expression for the tablix ‘Tablix1’ contains an error: Overload resolution failed because no Public '=' can be called with these arguments:
'Public Shared Operator =(a As String, b As String) As Boolean':
Argument matching parameter 'a' cannot convert from 'Object()' to 'String'.
When I render the report. How the tablix can be made invisible based on the parameter?
View 6 Replies
View Related
Sep 1, 2015
I want to develop a ssrs report which is grouped by month?
View 4 Replies
View Related
Sep 25, 2015
In report builder 3.0 I have row groups. I want a total at the end of each row but I want the total to be broken down by 3 columns based on 3 possible values of a field in the dataset. The report expands as the date range entered is increased. I want the total of clinic id + service id + program id + protocol id + appointment date but I want the total column to be broken down by appts that have shown or not shown or canceled.
See screenshots below for seeing how I have it configured. Is this possible? I have tried every combination of possibilities but I keep getting the row total in each of the 3 columns comprised of the total column.
and
The results look like:
The last Total column displays the entire row count NOT separated by the show, no show, and cancel status'. I have tried filters and different expressions but keep getting the same output. Is this even possible?
View 9 Replies
View Related
Mar 9, 2015
I created the report, which has 4 pages. Each page contains bunch of tables and charts, which display data in scope of dataset, created for each page and reflecting certain subject. Each page also has Header and Footer.
My users requested, the report has possibility to include or not include data on Page #4.
Other words, report should display 3 or 4 pages based on the entered parameter.
1. I created parameter named “Include #### metrics”, which contains options: Y, N
2. For each object on the page 4 I added dependency on the selected parameter in the visibility option.
Now if user select parameter Not include Page #4, report displays 3 pages as expected and page #4 is empty, but with Header and Footer.
The problem: Their preference is to not to show page 4 at all if someone chooses to not to include #### metrics.
My question is how to force the report to display just 3 selected pages.
View 5 Replies
View Related
Feb 6, 2008
Well, I have SQL Server 2005 SP2 Reporting Services installed and configured in sharepoint integrated mode, so I am deploying reports in sharepoint libraries. Also I configured sharepoint to use forms authentication with builtin AspNetSqlMembership provider, but after this action I couldnot open reports through sharepoint library, instead of this, error was displayed mentioned below. I searched and found hotfix Cumulative Update 3 build 3186 for this issue, request it from microsoft support and applied it, but nothing has changed!
Error I have been experiencing is following:
An unexpected error occurred while connecting to the report server.
Verify that the report server is available and configured for
SharePoint integrated mode. --> The request failed with the error
message:
--
<html><head><title>Object moved</title></head><body>
<h2>Object moved to <a href="/_layouts/login.aspx?ReturnUrl=
%2f_vti_bin
%2fReportServer%2fReportService2006.asmx">here</a>.</h2>
</body></html>
I continued to dig and find out that this hotfix should update Microsoft.ReportingServices.SharePoint.UI.WebParts.dll from version 9.0.3042.0 to new version 9.0.3180.0, but when I checked file version after applying hotfix, it remained the same as was before i.e. 9.0.3042.0. Apparently this cumulative update does not fix this issue.
anyone has any idea how to solve it? Thanks in advance.
sorry for my poor english :-)
View 2 Replies
View Related
Apr 19, 2013
i have below table in DB
DB Table
ID
Column
Row data
1
Supplier CODE
1001
2
Supplier Name
ACB
3
Product
7K7
4
Price
1000
now I create one report parameter order1 IF I will give order1.value=1,2,3 then Report will come like this :--
Suppliercode
Supplier Name
Product
1001
ACB
7K7
IF I will give order1.value=3,2,1 then Report will come like this :--
Product
Supplier Name
Suppliercode
7K7
ACB
1001
IF I will give order1.value=1,3 then Report will come like this :--
Suppliercode
Product
1001
7K7
View 35 Replies
View Related
Jun 11, 2010
I have two charts which are based on their own separate datasets. One chart shows data aggregated by MONTH, the other chart shows data aggregated by WEEK. I have put both of these charts inside a rectangle and set their visibility based on whether or not there is data returned by their respective datasets. This part is working just fine.
However, I have added a tablix to the report, deleted all columns and rows leaving only one remaining row/column so it looks like a textbox. This tablix is sitting on top of the two charts. The problem i'm having is that when both charts return no data and they do not show up in the report, the tablix still remains visible. I need to set the visibility but based on a condition between the two different datasets behind each chart.
Here's what I need: If ONE of the charts returns data, then I need the tablix to be visible. If neither chart returns data, then I need the tablix to be invisible. I'm trying to write an IIF statement comparing the two datasets but I get inscope errors. Isn't it possible to compare values which are contained in two separate datasets in SSRS?
Seems like something like the following logic should work:
IIF(CountRows("Monthly_DataSet") > 0 OR CountRows("Weekly_DataSet") > 0 , FALSE, TRUE)
Obviously the above expression will return syntax errors, but you'll get the point as to how i'm thinking. How can I set the visibility of the tablix based on these two charts?
View 4 Replies
View Related
Jul 7, 2015
I have a detailed report in ssrs in which data can come from start date and end date parameters.but the problem is. for example i gave startdate as 01/01/2015 and end date as 09/31/2015 then the data must be in displayed in such a way that jan month in one tab and feb month data in one tab and so on to sep month data in new tab when i export to Excel.
View 3 Replies
View Related
