Reporting Services : Report Using Two Datasets From Two SSAS Cubes
Mar 5, 2008
Hi,
I would like to build an SSRS report from two different cubes (SSAS 2005). These cubes are contained in two different SSAS databases.
To do this, i created a dataset for each cube throught MDX expressions.
These datasets use common parameters defined in my report.
Thus, i try to integrate in my report chart datas from the two datasets, but my chart only target one dataset.
Is it possible to create a kind of dataset view to join my two datasets ?
Or is it possible to join the cubes from two different SSAS databases in an MDX expression to put all my datas in a single dataset ?
thx for your help.
Zohir
View 3 Replies
ADVERTISEMENT
Jun 23, 2015
I have table which has 5 columns(col1,col2,col3,col4,col5) very simple and some data .
I would like to create a tabular report datasets on the report like shown below with grouping on col1
like
col1 some static text and dynamic text
------------------------
col1 col2 col3 col4
data data data data
------------------------
col1 some static & dynamic text
------------------------
col1 col2 col3 col4
data data data data
------------------------
Note I need to keep all the tables on the same page and when exported in excel they should come on same page sheet.
View 2 Replies
View Related
Jun 21, 2015
I have two different dataset in one Report, Each Dataset result is binded to a different Table component.
When I export as Excel ,I am getting all this in One Excel sheet.
I need this in separate excel, as dataset1 in excel1 and dataset2 in excel2.
View 3 Replies
View Related
Sep 27, 2015
My report has two data sets that hold inventory from two different departments.
ds_DeptA and ds_DeptB
I have a table, that pulls the DeptB status of DeptA record and displays it. This returns empty when the lookup fails to make a match, which is fine. Typically means DeptB does not have the record yet. I need to count these empty (null) feilds and populate it in a Text box outside of the table.
I just can't figure out the syntax with multiple datasets. I can't use the lookup expression as part of the count expression since the count expression is not contained in a table that has a dataset.
table: ds_DeptA
fields:
ID
Name
date_set_to_DeptB
<<Expr>> =Lookup(Fields!ID.Value,Fields!DeptA_ID.Value,Fields!DeptB_Status.Value, "ds_DeptB")
View 3 Replies
View Related
Apr 16, 2007
I never got an answer on this so I am reposting this issue. Also, please note that I have consistently reproduced this issue on multiple perspectives within and accross multiple cubes on 3 different SQL Server Instances. I have also had no problem with perspectives within Report Models that were not generated from an SSAS Cube.
Specifics:
=========
I have created a simple cube in BI Studio against an Oracle Relational Data Warehouse. In this cube I have created a perspective in which I have selected (included) only a small subset of measures and dimension. When I view this perspective on the Browse Tab of BI Studio, only the entities that were included in the perspective were available for report construction as was expected.
Next, I generated a model for this cube in Report Manager. Now here is the problem, I then opended the model in Report Builder and selected the same perspective from above, but all of the Entities in the cube were displayed including the fields I explicitely did not include in the perspective. I then looked at the .smdl file describing the Model and it looked like in the Perspective description section all of the cube's entities were included, even the ones that should not have been included. It seems as if the problem is ocurring durring the model generation. I also tried generating the model in Management Studio and it seems to be doing the same thing.
Any ideas on how to fix this? Could I be doing something wrong(probably)? I have to give a presentation soon and this is a big deal for the Project Stakeholders.
By the way, I am using the 180 Day Evaluation of Sql Server 2005 with SP2 CTP installed.
View 1 Replies
View Related
May 21, 2015
I have an SSRS report that gets its data from an SSAS cube, and it essentially displays a list of students and absences. Everything works fine.
But the users only want to see the top N students with the highest absences. For example, today they want to see the top 100, but during summer vacation, they only want to see the top 5.
Is there a way to add this parameter to the SSRS report? So if I select "5" from the dropdown parameter, it will show the top 5 absences.
The query that I use to populate the report is something simple:
SELECT NON EMPTY { [Measures].[Absences] } ON COLUMNS, NON EMPTY { ([Dim Date].[Date Key].[Date Key].ALLMEMBERS * [Dim Student].[Lte Cell Key].[Lte Cell Key].ALLMEMBERS ) } DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS FROM ( SELECT ( STRTOSET(@DimDateDateKey, CONSTRAINED) ) ON COLUMNS FROM [Daily Cube]) CELL PROPERTIES VALUE, BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING, FONT_NAME, FONT_SIZE, FONT_FLAGS
View 2 Replies
View Related
Oct 12, 2015
how to trigger report's refresh following its underlying SSAS cubes process?
I want to keep reports data updated at all times, especially when this happens while user is already browsing the report..
I don't want to set an auto refresh for the report every 5 minutes as my cube is processed only one time during the day...
View 8 Replies
View Related
Nov 20, 2007
Hello All
Here is my scenario
1. I have to use a ODBC driver which does not support sub query. So I am forced to use two datasets and link them together.
2. I cannot use Sub-Report because the sum from dataset 2 will be used in calculation in Dataset1
3. Also SubReport cannot interact with Main report
4. We Re-created the report in Crystal XI and we can have two datasets, link them and Subreport value can be accessed in Main report
5. We tested Custom method to get this value for every record in Dataset 1 and it is taking too much time.
6. I could not beleive we cannot link two datasets in RS 2005. I like to use RS 2005 but this limitation is forcing us to use Crystal
6. Before we make a decision I thought to post my question here. Is there anyway to link two datasets?
All your help will be greatly appreciated.
View 2 Replies
View Related
Oct 28, 2015
I have one tablix and this tablix has 2 parts(chart and table with numbers). Table with numbers uses Dataset1 and for chart I created another, 2nd dataset. How to get information from second dataset?
View 4 Replies
View Related
Feb 15, 2007
Hi,
I need to compare two datasets on the same server and then display if there is a difference in some fields for the two datasets.How can I do that? Is there an example somewhere that I can use ?
View 2 Replies
View Related
May 8, 2007
I am using SQL Reporting Services 2000.
Is there some way I can connect two datasets? Main issue is that I have to connect two tables from different databases and then display them in a report. Since these tables reside in different databases therefore I have one dataset for each table. While displaying the report I need to join both these datasets and display a report with data from both the tables.
View 1 Replies
View Related
Aug 5, 2015
Struggling to come up with an overall sum for each individual user when using the below code
SELECT
Practice.ibvStaffCategorisation.StaffId
,Practice.ibvStaffTotalsCL2Y.Period
,SUM(Practice.ibvStaffTotalsCL2Y.ChargeableMinutes) AS Sum_ChargeableMinutes
,SUM(Practice.ibvStaffTotalsCL2Y.NonChargeableMinutes) AS Sum_NonChargeableMinutes
[Code] ....
As I am using union all it shows two values for each user, the problem is I am getting the data via lookup like below
=Lookup(Fields!StaffId.Value, Fields!StaffId.Value, Fields!Sum_ChargeableAmount.Value, "ABSTimeRollingY")
I don't think I can use a Sum within a lookup so at the moment it is only bringing through the first value for each user but I would like it to bring through both.
Is there a way to do this within the dataset or via the query in the table?
View 2 Replies
View Related
Aug 26, 2015
I have to create tablix report using data from 2 datasets. The data source for one of the dataset, DataSet1 is Microsoft SQL Server and the data source for the other dataset, DataSet2 is Excel.
I have to pic 3 columns from DataSet1 and one column from DataSet2.
I tried using a lookup function Expression:
=Lookup(Fields!ProgrammerName.Value,Fields!ProgrammerName.Value,Fields!Skill.Value, "DataSet2")
The above expression is throwing #Error on that column in the output.what should I do?
View 5 Replies
View Related
May 22, 2015
I am not sure if this is possible or not, we have two datasets and each one has an additional calculated field which breaks the value JobBilledExVAT into three years.
So it reports for example how much we billed in May 2015, 2014 and 2013.
I have got the table to display this when reporting on one dataset by grouping by year
The datasets both look similar to this
SELECT
Practice.ibvSalesByJob.JobBilledExVAT
,Practice.ibvSalesByJob.[Year]
FROM
Practice.ibvSalesByJob
INNER JOIN Practice.idvJobType
[Code] ...
The calculated field is
=Switch(Fields!Year.Value = Parameters!Year.Value ,"15", Fields!Year.Value = Parameters!Pre1Year.Value ,"14", Fields!Year.Value = Parameters!Pre2Year.Value ,"13")
The field I am looking to add together is below
=Sum(Fields!JobBilledExVAT.Value)
If I do the below on the dataset associated with the matrix it displays the sum for each year correctly, I would however like to add the Sum(Fields!JobBilledExVAT.Value) from a different dataset (ABS1M) for the relevant year.
I tried this
=Sum(Fields!JobBilledExVAT.Value) + Sum(Fields!JobBilledExVAT.Value, "ABS1M")
However this adds 2015, 14 and 13 from ABS1M and doesn't add them individually if that makes sense? With the calculated field it only shows Year under the main dataset heading not 15, 14 and 13 separately.
I was think of using LOOKUP however I don't know how this would work as 15, 14 and 13 are not displayed under the dataset.
View 5 Replies
View Related
Apr 29, 2015
In ssrs, I want to create an expression for the row visibility. But, the expression will contain 2 conditions from different 2 datasets (DealStarts & RowofTrendingVisibility). I have applied a solution from online, but got an error message is
"The Visibility.Hidden expression for the tablix ‘Tablix9’ contains an error: [BC30451] Name 'launchdate' is not declared. "
I think that there is a minor issue in my syntax.
=iif ((Last(MonthName("DealStarts"))=monthname(month(today())) or launchdate ("RowofTrendingVisibility")<Parameters!StartDate.Value),true, false)
View 3 Replies
View Related
Sep 11, 2007
New to SSAS so, have some not so intelligent ???
We have created Dimensional Model within SQL 2005 and created SSIS packages to load. We have Pk's on Dimensions and FK's on one Fact table. We are thinking about adding clustered index to Fact that consists of the FK's and order by the Hierarchy within the Fact by Dimension. IS THIS A GOOD IDEA IF WE DRILL DOWN AND DRILL THROUGH = QUESTION #1
We build a CUBE from the dimenionsal model and we do not know how to build indexes on the cube. SO DOES SSAS AUTOMATICALLY BUILD INDEXES IT THINKS IT NEEDS ON THE CUBE AND DO YOU KNOW WHAT THEY ARE?? ALSO IF WE HAVE INDEXES ON DIMENSIONAL MODEL DO THOSE GET USED BY SSAS CUBE THAT WE CREATED WITH AUTO BUILD??? = QUESTION #2..
THank you
View 5 Replies
View Related
Jun 17, 2015
I want to use multiple datasets in a table and wants to do the full outer join on the two datasets in the same table. For example, my two datasets are:
I want to display a ssrs table like:
Both the datasets are coming from different sources. So I cannot integrate them at sql query level.
View 4 Replies
View Related
Jun 4, 2015
I am trying to use one dataset rather than two and was hoping to then filter the data via a table or matrix.
This is my dataset
SELECT
Practice.ibvStaffCategorisation.StaffId
,SUM(Practice.ibvStaffTotalsCL2Y.ChargeableMinutes) AS Sum_ChargeableMinutes
,SUM(Practice.ibvStaffTotalsCL2Y.NonChargeableMinutes) AS Sum_NonChargeableMinutes
,SUM(Practice.ibvStaffTotalsCL2Y.ChargeableAmount) AS Sum_ChargeableAmount
,SUM(Practice.ibvStaffTotalsCL2Y.NonChargeableAmount) AS Sum_NonChargeableAmount
,Practice.ibvStaffTotalsCL2Y.Period
[code]....
I would like to display two rows of data for each StaffId one representing the current period and the other all periods to date so the table would look something like below.
StaffId | Non Chargeable Time | Chargeable Time
CJJ | 0:20 | 4:20
| 4:50 | 19:20
JN | 0:05 | 5:30
| 1:30 | 25:30
The above shows two separate StaffId figures the first line for each shows non chargeable and chargeable for the current period and the second line a total of all periods in that year.
I have managed to get the first row to display only figures from the current period by using a filter however it also applies the same filter to the second row in the group. I have also tried to group the rows but am drawing a blank.
View 6 Replies
View Related
Jun 11, 2010
I have two charts which are based on their own separate datasets. One chart shows data aggregated by MONTH, the other chart shows data aggregated by WEEK. I have put both of these charts inside a rectangle and set their visibility based on whether or not there is data returned by their respective datasets. This part is working just fine.
However, I have added a tablix to the report, deleted all columns and rows leaving only one remaining row/column so it looks like a textbox. This tablix is sitting on top of the two charts. The problem i'm having is that when both charts return no data and they do not show up in the report, the tablix still remains visible. I need to set the visibility but based on a condition between the two different datasets behind each chart.
Here's what I need: If ONE of the charts returns data, then I need the tablix to be visible. If neither chart returns data, then I need the tablix to be invisible. I'm trying to write an IIF statement comparing the two datasets but I get inscope errors. Isn't it possible to compare values which are contained in two separate datasets in SSRS?
Seems like something like the following logic should work:
IIF(CountRows("Monthly_DataSet") > 0 OR CountRows("Weekly_DataSet") > 0 , FALSE, TRUE)
Obviously the above expression will return syntax errors, but you'll get the point as to how i'm thinking. How can I set the visibility of the tablix based on these two charts?
View 4 Replies
View Related
Mar 27, 2012
We have a report that was created in SSRS 2008 R2 that has 3 tables with different datasets that share a common ID that I want to use to group them.
If we run the report passing only a single value for the grouped parameter then the report works perfectly. What we need is for this report to allow multiple values to be selected for this parameter and for the report to run as if the user had selected each value one at a time and run the report with page breaks in between. Currently, when we pass multiple selected values for the grouping parameter the report displays all values for table 1, then all values for table 2, then all values for table three as below:
Table 1:
Detail rows for Group Param Value 1 ...
Detail rows for Group Param Value 2 ...
Detail rows for Group Param Value 3 ...
....
Table 3:
Detail rows for Group Param Value 1 ...
Detail rows for Group Param Value 2 ...
Detail rows for Group Param Value 3 ...
But we want it to render like this:
Table 1:
Detail rows for Group Param Value 1...
Table 2:
Detail rows for Group Param Value 1...
Table 3:
Detail rows for Group Param Value 1...
[code]....
The page breaks are needed so that when the report is exported to excel each individual report (by group param) will be on its own uniquely named tab.The report must export cleanly to excel and currently does for the single value passed.
View 5 Replies
View Related
Jun 4, 2015
I'm doing a BI project and I already develop the DataWarehouse and the OLAP Cube. Next step are the creation of a report using SQL Server Reporting Services.
I am used to use a query from Data Warehouse as the DataSet to implement the report. Is usual ou benefit to use the cube directly on report as DataSource?
View 3 Replies
View Related
Jun 19, 2015
I need to extract data from SSAS' cubes into a SQL Server table.
I already read examples using Linked server (with openquery), SSIS, etc. However, the result always return as many columns per dimension as levels. I need to extract all members of a dimension in a column. E.g., when excecuting the following MDX query in Adventure Works 2014:
select [Measures].[Sales Amount] on columns,
Non Empty [Date].[Calendar].members on rows
from [Adventure Works]
I would like to get this result (MDX query in SSMS), but with keys displayed intead of names:
But I get this (MDX thru openquery or SSIS):
View 4 Replies
View Related
Jun 29, 2015
I'm exploring creating local cube files, .cub from an excel sheet with tables.Would SSAS be able to create one cube from taking data from a 1 way table (A, B, C), a 2 way table (AxB, BxC, AxC) and a 3 way table (AxBxC)?
View 4 Replies
View Related
Feb 22, 2008
Hi,
I'm using SQL 2008 Februar CTP and trying to use SSIS for Data Source as described in http://msdn2.microsoft.com/en-us/library/ms159215(SQL.100).aspx.
I've created SSIS package and preformed steps described in http://msdn2.microsoft.com/en-us/library/ms345250(SQL.100).aspx (after fixing version to 10.0.0.0).
Now I got next error when trying to add SSIS DataSource (in Report Designer - Visual Studio):
Error messageThe data extension SSIS could not be loaded.
Please help.
Matej
View 3 Replies
View Related
Jul 15, 2015
I have two cube and i would like to get data from both cube and combine the results from both cubes to get final result to display result in SSRS reports like we can do in Stored procedure using temporary tables/Joins.Is there any way in SSAS to combine the data from multiple cubes? Data needs to be retrieved from the cubes based on the user inputs.
View 3 Replies
View Related
May 6, 2014
In My cube I have :
A Fact table <<Company Revenue>>
2 Dimension <<Month.Dim>> , <<Company>>
I have 4 company say (A,B,C,D) but i have record for only company A & D that too only for December month .
When I create a SSRS report out of the cube i want a matrix where all the company names to be displayed in the rows & all the months in the columns and company's revenue in data
What my report is displaying :
Company | December
-------------------------------------------------------
A | 20000
-------------------------------------------------------
D | 3900
-------------------------------------------------------
what is needed :
Company | January | February | March | ........... | December
-----------------------------------------------------------------------------------
A | | | | | 20000
----------------------------------------------------------------------------------
B | | | | |
----------------------------------------------------------------------------------
C | | | | |
----------------------------------------------------------------------------------
D | | | | | 3900
-----------------------------------------------------------------------------------
How do i achieve this either in SSAS or SSAS.
View 5 Replies
View Related
Sep 29, 2015
Is there any way to track the information about the connections to SSAS cubes through local Excel files (BI usage).
OPreviously, we are tracing the information about the BI usage through the BI SharePoint site. Now we want track the users who are using through local excel files .
View 9 Replies
View Related
Aug 26, 2015
Can applications connect to SSAS Tabular mode cubes through ODBC drivers? I have been asked the question specifically regarding SAS, and I can see (for example) SAS Enterprise Guide has the ability to connect to sources via ODBC, so I now need to find out if there are such things as ODBC divers for SSAS (specifically Tabular).
View 3 Replies
View Related
Sep 9, 2015
I just created a report builder. I have a main report and i wanted to create a sub report. why i cant or i cant view the path or the folder of my .rdl file to be use as my sub report.
View 5 Replies
View Related
Mar 12, 2007
Hi There,
Our DBA has installed reporting services on a server and now in order to access the report manager, one has to be an Admin on that Server. I am guessing that there is a mistake in the configuration of Reporting Services. Usually it should allow anybody who was added to the roles in the properties section of the Report Manager, right? I have also added the users to the DB..
Also I am using Windows Authentication to access Report Catalog items (Reporting Services is installed on Server2) from a web Application(deployed on Server1) and displaying the report using report viewer. For some reason, server1 has to be in an Admin role on Server2 to access the report catalog/report. This is kinda strange for me as I don't want everybody to be an Admin on Server2. Can anybody please point in the right direction?
Thanks.
View 3 Replies
View Related
Nov 3, 2015
Is there any way to get the report toolbar using SOAP Api in SSRS reporting.
View 6 Replies
View Related
Oct 9, 2015
I have done the following and a domain user would not access report created a login to the SQL server to the user (this SQL Server is where data source DB is)went to site setting in Report Manager and made this use a system userright clicked on report folder and made this user in the browser roleeven checked that in the report in question, the user is already in the browser role Still the user would not access the report! "User .......... does not have required permission" is the error message I am getting.
View 6 Replies
View Related
Jul 5, 2012
I have written a report visual studio. The report has 10 multi-value parameters that pull data from their individual data sets within the reports. When running the report from within Visual Studio it renders fine. There are no errors reported, only a warning related to a pathname I have use to retrieve image data and display on the report.Deployment of the report is error free.When I view the report I briefly get the "Loading" splash window, but then nothing. None of the headers or static text is displayed. The results window is blank.
The report defaults all the parameter values. In trying to debug the issue I have found by reducing the number of parameter values the report will render. Once I have all the values added, the report does nothing.Below is the query being used for the report. The where clause in the query shows the parameters being used and the syntax.We are running on Windows Server 2008 R2 and SQL Server 2008 R2.
Ralph
SELECT RTRIM(a.ITEMNMBR) AS Style, RTRIM(a.ITEMDESC) AS Description, a.ITMSHNAM AS UPC, c.LOCNCODE AS Store, d.LISTPRCE AS ListPrice, a.CURRCOST AS Cost,
a.USCATVLS_1 AS [Main Category], a.USCATVLS_2 AS Market, a.USCATVLS_3 AS [Alternate Retail], a.USCATVLS_4 AS Country, b.ITEMXTRAS_1_Type AS Type,
b.ITEMXTRAS_2_Finish AS Finish, b.ITEMXTRAS_3_SubCategory AS SubCategory, b.ITEMXTRAS_4_Department AS Department,
[code]...
View 7 Replies
View Related
