Reporting Services :: Rotate Text Box Instead Of Text In The Box?
Jul 21, 2015I need to rotate text box instead of text in the box. how do we achieve this in SSRS.
View 2 RepliesI need to rotate text box instead of text in the box. how do we achieve this in SSRS.
View 2 RepliesI'm currently working on a report and have all the requirements taken care of save one. I need to flip my text 180 degrees. I have seen how to do this by making an image on the fly and then rotating the image, etc. And that is what we previously had in place.
Unfortunately the reports are getting so large (20 images on a page, 150 pages for the report) that the reports will not print in their entirety through Citrix and cuts off after about 120 pages.
I also tried using upside down fonts which won't work as they flip the letter on a X axis as opposed to rotating them along a pivot. Sadly we can't reduce the number of occurrences per page or decrease the page count. So those are not options. They were the first things I asked about.
Is it possible in the SSRS Report Designer to rotate a textbox to run vertically, or simply to rotate the text in a textbox ? I have only seen this done within axes lables of charts, but not text boxes.
Thanks in advance,
Kenny
We want to rotate the textbox 45 degrees. When I use properties/writing mode, change it to "Rotate270", the normal textbox "This is not"
becomes the following
But we want to rotate it like below, is there a way to do this in BIDS? I found this thread but not working
[URL] ...
i would like to show all Labels available in a Chart and rotate the Labels 90°. How can i do that ? I changed the Propertie "Interval" to 1, "LabelsAngle" to 90, "LabelsAutoFitDisabled" to true in my Chart Axis.
View 12 Replies View RelatedHello,
I have a matrix with a title column. My matrix has a column that is expanded in 2 with data changes
as followings:
MY TITLE1 MY TITLE2
YEAR 2007 YEAR 2008 } matrix
matrix Column column } matrix
How can I change de title (MY TITLE2) differently according to the changing value of the dynamic data column ?
My title2 has to be located above the YEAR 2008 and has to be different from MY TITLE 1.
Thank you for your help.
Best Regards,
Hirondelle.
I need to justify the text of my textboxes (justify both left and right). SRS only has an option for left, center, and right.
Does anyone have a custom control that can do this or some tips, tricks, or ideas on how I can make the text justified?
Align the text in justified format.
I have designed a form and created two parameter fields to accept username and password from the user. Based on the values entered above, I am validating inside a stored procedure. I am unable to mask the text the user enters in the password field. I could not locate any mask property. Anybody can help me?
View 1 Replies View RelatedI was trying to write a custom legend text for a chart that I have in SSRS. In the chart I have a Bar chart and a Line chart. I have two values coming from a dataset. One is a running value. All the series values are from year dataset.
I need to get a custom legend text for the three data series looking like this. "2013- Mth", "2014-Mth". Year should be dynamic and coming from the dataset.
I tried writing an expression in the series legend option as shown below.
But I don't get the required text for the chart. I only get the default series text for the legend. If I only write a text without the dynamic year taken from the dataset columns I get the custom text. But not when I concatenate the dynamic year series with the static text. Any property to enable/disable?
I have a requirement, I want to display the employee status report. In status report, if the status=0 ,I need to display inactive.. if the status=1 active and if status=2 archived.. I am getting values from table like below. I need to change to text.How can we achieve the same.
View 3 Replies View Relatedwhat i need is very simple ...i just want to show very long strings in sql reporting services report but i can't find any way to wrap up the very long text in the text box of a matrix ..i mean there is no property says word wrap or text wrap in sql reprting service..there are can grow and can shrink properties but these is not what i want....when i set it as can grow false then user has no way to read the rest of the text , there is no preview when i set false 'can grow' propety.. basically what i want is , users are able to read the rest of the text when they move the mouse over the text and can grow should be false , so column will not take any space... please help !
View 2 Replies View RelatedFrom Text Box Properties/Visibility/Show or Hide Based on an Expression, I have the following:
=iif(fields!Data.value is nothing or fields!Data.value ="", true, false)
I am trying to remove the first line from the CSV export file as shown here:
Here is the TBP view:
The expression I have does not hide the Name of the Text Box. Or, I could be in the wrong area.
I need to validate my text box value for instance when the user will enter the value if its 6 - 10 character its fine but if it's less than 6 I have to display a message invalid value.
View 3 Replies View RelatedI have database fields that contain RTF text. If I use the default Textbox in SSRS 2008 Report Designer, I get all the RTF formating characters, which makes for a VERY ugly report.Is there another control I can place on my report that will take the RTF formated text and display it properly? I can do this in Crystal Reports, but I'm converting to SSRS 2008 so I need to be able to handle RTF formated text.
View 4 Replies View RelatedI have a data field in a SSRS Report that contains the requestor's User Id. Their ID is prefixed with "PRIV"...And I'm assuming that is the direct result of the network domain. I need to create a SSRS expression to determine if the User ID is prefixed with "PRIV" and then parse that out and use what's behind the "" as their true User Id.
example...."PRIVID123456" should appear as "ID123456" in the report data line.
When I create a Power View on the SQL server after loading up my data model, how do I turn on Text wrap for one of the fields?
View 2 Replies View RelatedI have a user table with Label and value fields where i would like to control the display of the text boxes based on the values selected in my user table.Can we adjust the text box positions dynamically based on the user table values.
Ex: Table
Label1 Field1 Label2 Field2 Label3 Field3
ID 100 Dept Sales
Report Design :
Label1: ID Field1:100
Label2: Field2:
Label3:Dept Field3:Sales
Expected Result :
Label1: ID Field1:100
Label3:Dept Field3:Sales
In my table i don't have values for Label 2 & Field 2 , can we adjust the spacing conditionally to be utilized by Label3 & Field3 in SSRS.
Note : Above mentioned data is just for an example and in my actual report i can have more than 3 columns and report is looking ugly with all the spacing if i don't have data in all the fields.
I tried creating Toggle Option over a Text box to Show the Image on Click but Since the Toggle refreshes the entire report user faces performance issue. Is there any other option to avoid the Toggle Refreshing the report or to show an image on Click of an Text Box?
View 3 Replies View Related
How to align the text in justify format In SQL server Reporting Services? Is there any code to do so?
When I install SQL Server 2005 Express Edition with Advanced Services SP2 on Windows Vista, Reporting Services and Full-Text Search are not being installed. My user account is configured as a Standard User. When I initiate the installation, I'm prompted for the password for the administrator user account.
During the System Configuration Check, I get a warning for the IIS Feature Requirement action. The associated message says: "Microsoft Internet Information Services (IIS) is either not installed or is disabled. IIS is required by some SQL Server features. Without IIS, some SQL Server features will not be available for installation. To install all SQL Server features, install IIS from Add or Remove Programs in Control Panel or enable the IIS service through the Control Panel if it is already installed, and then run SQL Server Setup again. For a list of features that depend on IIS, see Features Supported by Editions of SQL Server in Books Online."
KB Article 920201 ("You receive a warning message on the System Configuration Check page of the SQL Server 2005 Setup program on a computer that is running Windows Vista or a Server Core installation of Windows Server "Longhorn"") seems to address this issue. I used the Windows Features applet and selected all of the Internet Information Services items that were listed in the KB article; however, the "Windows Authentication" item was not in my list. ("IIS Metabase" and "IIS 6 WMI" were in my list but were worded differently--"IIS Metabase and IIS 6 configuration compatibility" and "IIS 6 WMI Compatibility", respectively--but I selected them both.) When I re-ran the SQLEXPR_ADV installer, I got the same warning...and Reporting Services and Full-Text Search were still not installed.
I went back into the Windows Features applet and selected all of the remaining unselected "Internet Information Services" items, and then re-ran the SQLEXPR_ADV installer. I got the same warning...and Reporting Services and Full-Text Search were still not installed.
It's frustrating that there is no obvious reason or error message as to why Reporting Services and Full-Text Search are not being installed. Are these features compatible with Windows Vista? Does anyone have an idea as to what the problem might be?
I have the following text field in SSRS report:
Version
2.2.32.7
1.0.0.0
2.0.0.0
1.2.0.0
2.1.8.8
1.4.11.0
I want to sort this field interactively.I have already sorted other fields, but as this field is text but has decimal data, its not sorting properly. How do I do this correctly? Once sorted ascending, report should show
Version
1.0.0.0
1.2.0.0
1.4.11.0
2.0.0.0
2.1.8.8
2.2.32.7
I am using SSRS 2008 R2 Report Builder 3.0 (10.50.4276.0) . I have simple set of data which has a persons Title and Name e.g. Mr Smith, Miss Jones, Doctor Foster
The report has a parameter where the user can select which records to show based on the matching titles (Mr, Miss, Doctor)
The Query for the report uses Title in (@Title) where @Title is the only parameter which can take multiple values. The report works correctly for any 1 value selected, but as soon as 2 or more values are ticked in the drop down, it fails.
I believe the parameter value is being passed into the query with a comma separating the values e.g. Mr,Miss which causes the IN statement to give an error, as the statement would be where Title IN ('Mr,Miss') which does not match any of the data values.
The parameter value passed needs to be 'Mr','Miss' for the IN statement to work. What statement do I have to put in the report query to get it to select any of the data rows where the title matches any 1 of the selected values?
I need to set a field value based on two date time parameter's.What is the correct syntax to allow me to pass the value into the field in my SSRS expression ?
=IIf(Parameters!EndDate > Parameters!StartDate.Value, "Overdue")
I was trying to export a report which contains a number format. When I do that, all the numbers in excel will have a green small tag beside it saying "Convert from Number to Text".
Is there anyway that I can change the format to a number when I export it to excel?
on this report, am having ids separated by '^'.when I export to excel, I wrote the expression as
=Replace(Fields!Id.Value,"^",Environment.NewLine)
It is working fine, but the problem is if I have only one id in some scenario, then this case that cell is showing an error "The Number in this cell formatted as text or precedence by apostrophe" .But in other scenario,If the ids are separated by "^", then this case that cell wont show any error. So I need to display the cell wont have any error symbol if I have only one id .How can I achieve this?.
I'm developing an SSRS report using VS2013 Premium with SSDT - BI v12.0.2430.0. SSRS is hosted on a SQL 2014 instance.The underlying database table has a varchar(max) field which stores text and embedded image data from a third-party application. I can extract this text, save it as an html file and open that in a browser. It renders complete with any embedded image.Meanwhile, the report textbox has its Placeholder Properties, Markup type set to HTML. Yet when I run the report, the text is displayed but any embedded image is not.Is there any approach I can take, perhaps transforming the varchar(max) data to another format in the query for my dataset, that can show the text and any embedded image in my report? Or is it that the TextBox control is limited, not unreasonably, to text only? If so, is there another control I could use, perhaps custom or third-party?
View 7 Replies View RelatedI'm trying to sum a column in a report. in Most columns I can just wrap the row level expression with "Sum()" and it works. However, I have run into a few that give the following error. The Value expression for the text box ‘Textbox241’ specifies a scope that is not valid for a nested aggregate. The scope must be the same name of the scope specified by the outer aggregate or the name of a group or data region that is contained in the scope specified by the outer aggregate.Here is my row level expression that works.
=Code.Divide(sum(Fields!WeeklyUnits.Value),sum(Fields!EstUnits.Value))
*
(Code.Divide(sum(Fields!EstHours.Value),sum(Fields!EstHours.Value,"Job")))
Here is my attempt to Sum the row level for the footer area.
=Sum(Code.Divide(sum(Fields!WeeklyUnits.Value),sum(Fields!EstUnits.Value))
*
(Code.Divide(sum(Fields!EstHours.Value),sum(Fields!EstHours.Value,"Job"))))
I want to change my text box text colour for following ;
MY data was:
column name: NAme
Unitedstatesofamerica
america state
Northamerica
southamerica
America should be bold and red colour.
I want to write expression to BOLD and change colour in ssrs for America.
Is it possible to create a Data Driven Subscription report as a text file output to a shared folder?
View 6 Replies View RelatedIs it possible to display only the first few words of a block of text with a "Show More" link at the end, which when clicked would expand the block to show all content?
"Collapsed":
Lorem ipsum dolor sit amet, consectetur adipiscing elit,
<...show more>
"Expanded":
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod
tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur.
Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.
<... show less>
I am exporting SSRS report to Excel I am aware that excel doesn't show footer , It shows in print preview but my footer has text box which have text disclaimer more than 255 characters, the data getting truncated.
View 3 Replies View RelatedI have a report that uses different datasets based on the year selected by a user.
I have a year_id parameter that sets a report variable named dataset_chosen. I have varified that these are working correctly together.
I have attempted populating table cell data to display from the chosen dataset. As yet to no avail.
How could I display data from the dataset a user selects via the year_id options?
Hello there!
I installed and configured SQL Server 2005 reporting services. When I try to connect to it using SQL Server Management Studio, I get the following error:
Client found response content type of "text/html", but expected "text/xml".
What should be done to overcome this?
Does anyone have any idea about this?
Thanks in advance
Hemant