I am working on a SSRS report and need to show a progress bar as shown in the image below.I can think of using two cells in my tablix with
1:-First cell -a databar having value as percentage (scale 1 to 100)
2:-Second cell containing percent value and then removing the border ( not merging )
I have a report which queries events occurring during the reporting time frame the user selects.
A user selects arrivalDateStart as 8/1/2015 and arrivalDateEnd as 12/31/2015 and the results are returned.
The issue is that there is an event that began 7/31/2015 and ends 8/2/2015. This does not appear on the report. The user does not want to have to pick an earlier arrival date as the parameter of his report to pick up anything that was already in progress prior to the beginning of the month.
I am trying to figure out how to add an expression that will also return events that are in progress over the arrival date chosen for the report.
Hi guys, I am using ASP.NET 2.0, In one web page i am loading a data from VIEW,This view takes more time to execute and this this data is i am showing in grid on page load event.and the web page only displayes after the view execute until it remains on old page User fills there is no response. I want to show the progress in status bar,Can any one tell me how can i do this. Thanks in advance
I have a script file which do the replication and in the script there is a lot of table need to be addad as article.
So while use osql execute the script there would be cost a lot of time. What I want to do is show a dialog which could show the progress percent and the file name which is now being addad as article.
I have a line graph in my report.My report has no parameters on it.What I ideally want it to do is if I run the report today (May) it will only show me the last 12 months so May to May.At the moment it is including April from last year as well, so would want that excluded. If I run it in two months time in July I would want it to only show July to July.The chart has the categories of Finanical Year (in the 2014-2015 format) and the actual month name.
I have created a new report.what i do in application is i compress the image and save it in database.now i need to retrieve the compressed image and display in the report. I have used the following code to decompress the binary data save in the image.
I dont know after that what should i do. How to show the picture in SSRS Report. I need to show picture in many reports.one of my doubt is how to call this function in SSRS Report. The function accepts input as byte but in database the column in varbinary.
Should I convert the input type of function to varbinary instead of byte array?
Public Function Decompress(ByVal arr As Byte()) As Byte() Dim notCompressed As Boolean notCompressed = False Dim MS As MemoryStream MS = New MemoryStream()
In this, I need to add line charts for the three years specifying the running total. I already have bar charts for the respective years. This is the query that I used to get the dataset.
SELECT [Parent Name], [ID], [Year], [Month], SUM([Value]) AS 'Running Total' FROM Regulus_Data_Backup GROUP BY [Parent Name], [ID], [Year], [Month] order by [Parent Name],[ID], [Year], DATEPART(mm,CAST([Month]+ Convert(varchar(4),[Year]) AS DATETIME))
Then I added a series with a expression that had the chart type as line as shown below.
My Expression was =RunningValue(Fields!Running_Total.Value,SUM,"MonthWiseData")
My 3 parameter was "MonthWiseData" which is my dataset name. Is this correct? I use the same dataset to get the bar charts too. I get a error message now when loading the report saying "the scope parameter must be set to a string constant.
My goal is to get bar values for 3 years for the 12 months and in the same chart get the cumulative numbers for the 3 years for the 12 months. How can I do this?
The first six months will be displayed in each case.
But when i choose 6 months i just want to display first six months only.when i choose 12 months i want to be displayed first 12 months columns only and for 18 months all the columns,.
Sample Query : SELECT 'A' [Type], 1 AS [NUMERATOR] , 2 AS [DENOMINATOR] UNION ALL SELECT 'B' [Type], 2 AS [NUMERATOR] , 4 AS [DENOMINATOR] UNION ALL SELECT 'C' [Type], 3 AS [NUMERATOR] , 6 AS [DENOMINATOR]
[Code] ...
I need to show the ratios beside each bar (shown in red) as shown in the above diagram.
I tried creating Toggle Option over a Text box to Show the Image on Click but Since the Toggle refreshes the entire report user faces performance issue. Is there any other option to avoid the Toggle Refreshing the report or to show an image on Click of an Text Box?
A Fact table <<Company Revenue>> 2 Dimension <<Month.Dim>> , <<Company>>
I have 4 company say (A,B,C,D) but i have record for only company A & D that too only for December month .
When I create a SSRS report out of the cube i want a matrix where all the company names to be displayed in the rows & all the months in the columns and company's revenue in data
What my report is displaying :
Company | December ------------------------------------------------------- A | 20000 ------------------------------------------------------- D | 3900 -------------------------------------------------------
what is needed :
Company | January | February | March | ........... | December ----------------------------------------------------------------------------------- A | | | | | 20000 ---------------------------------------------------------------------------------- B | | | | | ---------------------------------------------------------------------------------- C | | | | | ---------------------------------------------------------------------------------- D | | | | | 3900 -----------------------------------------------------------------------------------
I'm developing an SSRS report using VS2013 Premium with SSDT - BI v12.0.2430.0. SSRS is hosted on a SQL 2014 instance.The underlying database table has a varchar(max) field which stores text and embedded image data from a third-party application. I can extract this text, save it as an html file and open that in a browser. It renders complete with any embedded image.Meanwhile, the report textbox has its Placeholder Properties, Markup type set to HTML. Yet when I run the report, the text is displayed but any embedded image is not.Is there any approach I can take, perhaps transforming the varchar(max) data to another format in the query for my dataset, that can show the text and any embedded image in my report? Or is it that the TextBox control is limited, not unreasonably, to text only? If so, is there another control I could use, perhaps custom or third-party?
I have a requirement to display project start date and finish date in timescale view. The data in database table available as per below -The start date and project finish date should fill color in the timeline view as per below example, by quarters for a current financial year, last year and plus two years a head.
I have a set of SSRS reports published on the server. It can be accessed through a web application or through SharePoint. Most of the reports work fine through both - web app and SharePoint. However, one of the report, which returns large amount of data has some problem:
1. It generates fine from web app 2. It generates fine from SharePoint; only if one or two values selected from Filter dropdown 3. However, if all items (about 20 items) selected from Filter dropdown... and click on View Report, it processes for a while and then shows nothing. The page remains blank.
Did some research and felt the problem is with Distributed Cache Service.
We are showing hovering data in the report. When we hover the pointer of the mouse over cell, it shows the data. But when we export the report in excel, hover functionality is not working in exported report. Finding the solution to ensure hovering should work in the exported excel report.
On the front sheet I've created system wide figures with a two columns per month and a matrix which is also broken down by category (e.g. child fiction, child non fiction, adult fiction, adult non fiction) which has row and column totals.
I want to have a page like this for each branch in the system.
How to show the CurrentMonthanddateandyear in my report header in ssrs?
1.How to show the currentdateandMonthyear exmple date format like June 29 2015 on my report header.
2.How to change the report rdl name with the same name like EmpUpdatedreportJune 29 2015.rdl ,it is possible to create and change the rdl file name with the current dateandmonth.
Is it possible to display only the first few words of a block of text with a "Show More" link at the end, which when clicked would expand the block to show all content?
"Collapsed": Lorem ipsum dolor sit amet, consectetur adipiscing elit, <...show more>
"Expanded": Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum. <... show less>
Basically i have 3 images capacity per record in my asp.net application. In there i am saving the image path with record id in database and image in my application folder.
Now i am creating SSRS Report in Report builder . In there i have taken one image control to show the images. In the Image properties in report builder i have chosen database under the select the image source field. then inside use this field i have chosen image url and in use this MIME Type i have selected image/jpeg. Now i have saved this report in report server folder.
Now while calling in .net web from through report viewer control. It is opening the report but wont showing the image.
SSRS 2012 - VS2010...The report compares two years with a sort order on a value that has been engineered based on text switched to int. When sorting A-Z this is the result in the horizontal axis is: 5th, K, 1st, 2nd, 3rd, 4th, 5th..When sorting Z-A the result in the horizontal axis is:5th, 4th, 3rd, 2nd, 1st, PreK..Z-A is correct but A-Z sorting shows 5th as the start and end. The magnitude of the PreK location is correct but the label is wrong on the A-Z sort order. The sorting is implemented using the Category Group sorting option.
I have a custom external application that executes some packages. I would like to display the execution progress as it would appear in the Progress tab of the SSIS designer. How would I do that? Any help is appreciated.
I need to create a chart with the following features
1) Bar chart that has data for 3 years (3 series) 2) Line chart that has the same data as per the above points on the bar chart but this is a running total. (3 series) 3) These data points are for the 12 months 4) there should be a secondary axis for the cumulative one
I'm having trouble using a Progress database as a source. I have an OpenLink driver installed and a System DSN set up. I can successfully test the connection. I added this DSN to the connection manager and added it to a DataReader Source. I then added the SQLCommand property. I was able to map columns and such, so I believe the SQLCommand was successfully parsed. However, when I try to save the DataReader Source, I get an error:
Error at Data Flow Task [DataReader Source [2266]]: System.Data.Odbc.OdbcException: ERROR [HY010] [OpenLink][ODBC][Driver]Function sequence error at System.Data.Odbc.OdbcConnection.HandleError(OdbcHandle hrHandle, RetCode retcode) at System.Data.Odbc.OdbcDataReader.NextResult() at System.Data.Odbc.OdbcDataReader.Close() at Microsoft.SqlServer.Dts.Pipleline.DataReaderSourceAdapter.ReinitializeMetaData() at Microsoft.SqlServer.Dts.Pipleline.ManagedComponentHost.HostReinitialieMetaData(IDTSManagedComponentWrapper90 wrapper)
I am trying to migrate my reports from SQL server 2000 reporting services 32bit to 2005 64bit. I am following the migration steps that MS specified. Restored my Reportserver and ReportserverTempDB databases Then I was using the configure Report services to upgrade these databases but I always end up getting the follwoing exception when I run the upgrade on the "Database Setup" configuration for 'ReportServerTempDB' database System.Data.SqlClient.SqlException: Could not locate entry in sysdatabases for database 'ReportServerTempDBTempDB'. No entry found with that name. Make sure that the name is entered correctly. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Common.DBUtils.ApplyScript(String connectionString, String script) at ReportServicesConfigUI.SqlClientTools.SqlTools.ApplyScript(String connectionString, String script)
It's driving me crazy, why is it looking for 'ReportServerTempDBTempDB' in the catalog instead of 'ReportServerTempDB'? Is it possible to migrate from 32bit to 64bit?
I'm attempting to obtain a cost effective solution for my existing customers to develop reports on their SQL 2000 Server installations using their Reporting Services 2000. With products like Visual Basic.NET 2003 becoming almost impossible to obtain, I have at least one customer who is running into a dead end.
One option possibly is the SQL Express with Advanced Services download, which has Reporting Services. My questions are as follows:
Can the report designer component of SQL Express Reporting Services be configured to connect to an external database (which would happen to be a SQL 2000 database) to establish its datasets? Does the resultant designed report end up in an RDL file? If the customer published this report via the Reporting Services 2000 Report Manager, would the report be able to run?
Sorry for asking a question like this that I could probably answer on my own, but my customer needed this answer yesterday. I have scoured the web and microsoft sites - and posted a question on the official SQL Reporting Services cateogy ... in an attempt to answer the basic question of how to design reports for Reporting Services 2000 in the absence of Visual Basic.NET 2003 (or other .NET 2003 tools) with no success.
I work in a big project and we will begin in using reporting services as the base technique for reports and I will be responsible for this part. but I have a problem I will discuss in the following:
Currently: We use currently devexpress reports and we have 2 languages(Arabic and English). the data in tables saved in two ways (Arabic and English). when the end user change the language of the web site the report data language changed when run it.
Example:
we have table with (ID, NAME_AR, NAME_EN, JobTitle_AR, JobTitle_EN). designed report will display(ID, NAME_EN, JobTitle_EN) . but the end user change the language of the system the report will