Reporting Services :: Ssrs 2012 Change Parameter Values
Apr 22, 2015
In an existing SSRS 2012 report, I have a requirement for a user to be able to select by multiple school(s) and/or multiple grade(s). This is fine except certain schools like elementary have grade levels of KG to 06, Middle school has grades of 06 to 09 and high school has grades of 10 to 12. Thus for example, if a user has initially selected grades 11 and 12 and then they select an elementary school that has grades KG through 06, the 'grade level' selection would need to change.In other words, I am thinking of initially having the available and default values for the parameter called 'Grade' set to KG through 12. However if a school is selected that only has specific grade levels like elementary school, how can I override the original grade level and only allow the user to select grades that the particular school contains?
There is a multi value parameter called "include" in the report where "Allow Multiple Values" is checked and it has 4 Available values as shown in the attached screen shots and preview of the report is also shown .There is no data set for this parameter and the values will get displayed on the report based on the visibility condition set in the report.Example : If first value is selected then 1 is passed and based on the visibility condition set in the report - the report output is displayed.None is default value and has value 4 and when the report is run with this option i.e. "None" then rest three parameter values are not applicable .
Requirement : -When the end user selects (Select All) Check box then (None) -check box must be disabled or must not appear for selection for the end user -When the end user selects check boxes either of the first three except None then also None check box must be disabled or must not appear for -selection for the end user -when the end user selects a combination of first three then also None check box must be disabled or must not appear for selection for the end user -The None is set as default with a value as 4 and is applicable only when the user does not select either of the first three values and the report will run.
I want to Change parameter position in SSRS report.I need Start Date and End Date Parameter at same column so client can easily select Start Date and End Date.I have tried a lot but not succeed.
How Can I change the position of Start Date and End Date.I can't change order of other three parameter Select Institutions, Select Author and Course Pack Names parameter because they are internally related to each other(forward dependencies are there).
I have a requirement to show Day of week in parameter drop down list in different order, actual order is Monday to Sunday (Monday,Tuesday,Wednesday,Thursday,Friday,Saturday,Sunday) in DayOfWeek dimension in cube.
But my requirement is to show Friday to Thursday(Friday,Saturday,Sunday,Monday,Tuesday,Wednesday,Thursday) in DayOf Week parameter drop down list and report table. How I can get this requirement done.
In an existing ssrs 2012 report, I want to basically add the following logic to a new dataset that will be used by a new parameter called 'Inventory'.
SELECT DISTINCT Inv_number as value, Inv_name as label FROM s.dbo.fnUser( @endYear, 0, 0, 0) WHERE (@report is not null) order by label,value
In this ssrs report, there are 15 reports that can automatically be generated. I basically want this new parameter called 'Inventory' to only be active when the 4th report is selected to be generated. Thus in the query I listed above, how can I change the query to only be active when the 4th report is selected?
I tried to change the where clause to (@report(4) is not null), but that did not work.
I am creating a SSRS report using a SSAS cube as it data source. The user would like to select multiple values from a reporting parameter that is then used as a filter on the MDX statement. I am bale to have the report work successfully when only one value is selected but not when multiple values are selected; the report uses only the first value from the reporting parameter when it contains multiple values. How do I filter an MDX query using a SSRS report parameter with multiple values?
Result (While I am selecting 'Yes' in dropdown) ---------------------------------------------- incident_id usr_id item_id 10059926 191 61006 10054444 222 3232
SELECT incident.incident_id,incident.usr_id,incident.item_id FROM incident where exists (How i can write query here to check the act_type_sc=ADD_ATTCHMNTS is exists)
I have a multi value parameter called "Location" and this depends on another multi valued parameter value. The default value for the parameter "Location" comes from the another another multi valued parameter. Now say when the default value is set for the parameter Location like the below:
The Location parameter data set has values from the Query and default values has been set as shown below:
I'll go to a dataset, open up the query designer, add a new parameter, then refresh the fields, but the parameter won't be added as a report parameter. If I go to the dataset properties under the list of parameters, the value in the dropdown will be blank. However, sometimes this will automatically add.
Is this a bug in Visual Studio? How do I get around this?
I have a situation in SSRS to get the common values between the two columns where the values are sorted comma separated as below.Ex:
ColumnA : abc,cde,efg ColumnB : cde,xyz,abc
the result in
ColumnC : cde,abc
similarly Column A and B will have n number records. I need to right an expression or the Code function to get the required result in ColumnC. I am using SharePoint Lists as Datasource. Cannot write SQL query to achieve this requirement.
I am SSRS user, We have a .net UI from where we want to pass multi select values, but these values are comma separated in the database. how can I write a sql query such that when I select multi values on my UI, the comma separated values are take care of.
We have SCCM 2012 primary site and Remote SQL 2012 server. Due to hardening and password reset we are facing reporting issue.
while we Open the SRS report in SQL server and try to edit the Report (Report Builder) we are getting following error due to which we are unable to configure Reporting Service point in the SCCM 2012 server. We created the New Reporting server database still we are getting the below error.
Currently i am setting up a report. The data source comes from pre-defined custom datasets where i've pre-entered the parameters for both Month and Year.
I already have one table up and working, but now i need a new table below it with a % column for each month so it gives visibility for the trend in recent months. As the interactive parameters are already in place; when i try to create the table it comes through with the specific month that the parameters are set too, and change when the parameters are altered.Is there a way to ignore the parameters for this table; or get around it?
The data source is Fetch XML - so all the values are string.I need to sum the values but getting an error:
Warning 1 [rsAggregateOfNonNumericData] The Value expression for the textrun ‘Textbox25.Paragraphs[0].TextRuns[0]’ uses a numeric aggregate function on data that is not numeric. Numeric aggregate functions (Sum, Avg, StDev, Var, StDevP, and VarP) can only aggregate numeric data.I tried converting it to INT but it returns a large number which does not match what I'm expecting.
I have created ssrs report which has a parameter for start date. I want another parameter which shows time-frame of 6months,12 months,18 months,24 months which calculate dynamically from my start date
select distinct [dbo].[MSP_EpmResource_UserView].[ResourceName], [dbo].[MSP_EpmProject_UserView].[ProjectUID],[dbo].[MSP_EpmProject_UserView].[ProjectManagerName] , [dbo].[MSP_EpmTask_UserView].[TaskStartDate],[dbo].[MSP_EpmTask_UserView].[TaskFinishDate], [dbo].[MSP_EpmTask_UserView].[TaskPercentCompleted],[dbo].[MSP_EpmProject_UserView].[Project Status] AS StatusForExecutiveReporting,
In my report I have two parameters PID and patientName, but user want to enter either PID or patientName. When I preview the report user can only enter one parameter not both. Is there any way to create two parameter available but users can enter only one parameter value?Here is my report layout and query I used for that report. These two parameters comes from one column 'String_NVC' as from query and column name 'Description' as from the report layout.
SELECT Username_NVC AS Username, String_NVC, Time_DT AS UserActionDateandTime, FROM test
I am working on SSRS 2008 R2 in BIDS. The report's data source is from Stored Procedure which is running good in SQL Server 2008 R2.
The stored procedure has an output parameter, which I don't know how to set in BIDS, so when I try to add the data source to the report, a mistake is shown up.
So my problem is: 1. How to set the output parameter correctly, so the data source(stored procedure) can be run as good as it were in SQL Server 2008 R2. 2. How to get the output parameter value in BIDS which will be used to set the title of table dynamically.
I'm building a report that has a column in the table called countries of origin, that column can contain data like "USA","China" ( normal countries) but some rows can also contain "USA, China, Australia" ( multiple counties in one row).
I'm trying to build a filter to filter my results :
-I have a data set created with a list of all world countries
-I've Build a Parameter containing a drop down list with all countries
--- My problem is when I want to create the filter in my main data set , I can so it , but when I search for example for "USA" , I don't get the lines where there are multiple countries and "USA" is one of them...
There must be an expression in the filter that will be able to search through all the values in the string and return me my correct results.
I am having SQL query which has inner join table from another Database. The below highlighted query shows its values.
/*Trend and Capacity Report*/ SELECT MEA.DisplayName AS Cloud, MEB.DisplayName AS VM, OS.PropertyValue AS OS, CONVERT(varchar(17),PD.DateTime,113) AS Date, VM3.VirtualCPUCount AS VCPU FROM Perf.vPerfDaily AS PD INNER JOIN vPerformanceRuleInstance AS PRI ON PD.PerformanceRuleInstanceRowId = PRI.PerformanceRuleInstanceRowId INNER JOIN vPerformanceRule AS PR ON PRI.RuleRowId = PR.RuleRowId
[code]....
My request is to calculate total capacity of all available Virtual CPUs, Memory and Storage from 4 separate clouds: 'cloud1','cloud2','cloud3','cloud4'
Whenever I select =Sum(Fields!VCPU.Value) expression in Report Properties and assign it to a variable and assign that variable to a Text Box field I get the value as VCPU * (Number of VMs) which is not correct.
I am looking to get the value of VCPU from all 4 clouds above.
I am using 2 charts in my SSRS Report. Requirement is to load the Right side chart based on the click event from left chart.
I can achieve it using go to report option. But the issue is total page getting refreshed while using this option. I feel bookmark option will be the best. But I don't think I can pass a value to Bookmarks.
I am trying to build a report using SSRS.I need to retrieve a distinct value from my initial query and place this in the header or group row.The detail lines are hidden but may be expanded(shown).I then have another group row in which I require the sum of all distinct values from my previous group row.To explain pictorially I have the following:
-Scroll right to see the pink squares.Note that the total in the pink square is the sum of the individual var3 values distinct so 10 even when var3 =4 in euro currency. -I have tried using sum(var5) but this will give the incorrect value as it sums all detail lines not just the distinct values. -I have tried using another dataset but when referenced the grouping behaviour expected is non existent so where I expect 40 I get 80 i.e. sum disregarding values of var1 and var2 although these are the grouping variables. -I need it to be dynamic so I am unable to use IIF(...).
If I could get var4 or var6 to be the totals I require I could work with that.I have also tried the following custom code:
Dim public unitLimit as Double Public Function Getcpvalue(ByVal limit_amount1 AS Double) AS Double unitLimit = unitLimit+ limit_amount1 return limit_amount1 End Function
I have 2 datasets, dataseta is a list of tickets and their relevant owner and databsetb is a list of owners and a days worked first against them.I have a table with a detail grouping on ticketid and a normal grouping on owner which works well... all straight forward to this point. In this table on the owner grouping level I also have a lookup to datasetb which pulls back the days worked per owner which works fine as well. But what I now need to do is total the days worked over all owners, which sounds simple but doesn't work. This is the expression on the days worked for each owner -
SELECT dbo.incident.incident_ref, Customer.cust_n,incident.date_logged FROM incident INNER JOIN Customer ON incident.incident_id = Customer.cust_id WHERE incident.date_logged BETWEEN @date_from AND DATEADD(day, 1, @date_to)
I need to use a condition here to display customer based on my selection in dropdown list (Include ABC )
I have a ssrs report with Name, phone ,state and city as columns. I have check box as one of my parameter(optional). If user checks that checkbox then it should group by state, if checkbox is left blank no need to do any grouping. How can i do this in ssrs 2012.
I'm using SSRS 2005 which connects to SQL Server 2005. I need to pass Multi valus for single parameter...
E.g. Command type : Text SELECT * FROM COUNTRY where CountryId IN ( @CountryID)
If i tried to preview using single parameter, it shows the record without any problem. However when i tried to put multi values, it gives error message?? I read somewhere which says, need to set to multivalue. But, i could not find the place to set the multi value option...
How to solve it?? Your suggestion/recommendations greatly appreciated.
