When i try to restore the encrypt key to reporting service getting the below error.The version of the report server database is either in a format that is not valid, or it cannot be read. The found version is '147'. The expected version is 'C.0.9.45'I found the table in Database called DBUpgrdaeHistory
UpgradeID DBVersion
Datetime
31 147
[code]...
When publish report define file (SSRS2008 ) to SSRS2008 server , it throws that the report definition is not valid. But I use VS2008 deploy it and it is succeeded to publish to SSRS2008 Server. Why ?
<errorinfo>Details: '.', hexadecimal value 0x00, is an invalid character.</errrorinfo><code> Reporting Service 2005 m_ReportingService = new ReportingService2005();this.m_ReportingService.CreateReport(reportName, parentFolder, overwrite, report, null)</code>
I am building reports based on Report Builder and SQL server 2014.
Our report data are hosted on azure sql database.
Date time on azure are stored as UTC.
When I run my report locally, how can I format correctly the date/time format on my report in order that if I am in French, I should have the date/time set to UTC + French offset. How can I do this ?
Now, I checked and verified that my backup version of SQL Server is the same as the version installed on the computer I'm restoring too.
I have SQL Server on a production machine that I backed up and want to test a full restore on a dev machine to make sure it will work when I need it to.
Now that I've run the restore command on my tape backup and go to restart the SQL server service I receive:
Configuration block version 0 is not a valid version number. SQL Server is exiting. Restore the master database or reinstall.
I'm afraid I don't understand why this is happening. If the builds are the same, then shouldn't restoring the MASTER database have worked normally and I'd be able to restart the service now?
Any thoughts or suggestions?
Hi My project is in .NET 2003 i.e. framework 1.1 and database in SQLServer 2000. But the reports have been developed using SQLServer 2005 Reporting Services. Now when I am trying to deploy them through deployment project of .NET its giving me following error:"Using other editions of SQL Server for report data sources and/or the report server database" is not supported in this edition of Reporting Services. Now I am really confused with this. Can any one please guide me regarding this ASAP. Thanks, Falguni
View 4 Replies View RelatedI'm using SQL Express with Advance Services & I get this error when I try to deploy my reports. Why do I get this error
An error has occurred during report processing. (rsProcessingAborted)
Cannot create a connection to data source 'EDPSYS'. (rsErrorOpeningConnection)
The feature: "Remote access to report data sources and/or the report server database" is not supported in this edition of Reporting Services. (rsOperationNotSupported)
Justin Song
I have a matrix report and as per the requirement, I must format the row colors. First row must be no color and second row must be light blue. This color formatting would repeat for remaining rows in the matrix. I tried to select the entire row in the matrix, selected "Background Color" option and in "Expression" window, I entered "=IIf(RowNumber(nothing) MOD 2, "White","LightBlue")".This resulted in the color formatting of columns in the matrix report.
View 2 Replies View RelatedI am using SSRS 2008 R2 and have a report set up on a subscription to be exported to a .TXT file and placed in a network drive folder. The report generates as it should and is placed in the network folder as it should and the file format is .TXT. However, when the text file is uploaded to an ftp site, the results of the very first record within the system the file is uploaded to, has 3 weird leading characters.
But the rest of the records are imported perfectly, as they should be. The system that the file is being uploaded into is not our system, it is a system at a USA Today Newspaper office and is an IBM iSeries server with the programming language of LANSA (Never heard of it).
I have edited the report server configuration file to give the ability to export the report to a .TXT file format and I have included the code snippet on here. Maybe I have missed something, not sure. I have also included the screenshot of the file upload results that were sent to me by USA Today. Is there anything I can do to get those 3 characters to not show up in the first record?
Report Server Config Snippet:
<Extension Name="TXT" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering">
<OverrideNames>
<Name Language="en-US">TXT (Pipe delimited)</Name>
[Code] ....
I have a report that I need to develop in landscape format. Also I need it to be landscape when converting to PDF and taking printouts. let me know the exact height and width measurements in inches for the report and report body?
I need the margin to be 0.5 inch.
We are facing an issue where the report rendering for specific report parameters is failing with an exception
Throwing Microsoft.ReportingServices.ReportProcessing.UnhandledReportRenderingException: , Microsoft.ReportingServices.ReportProcessing.UnhandledReportRenderingException: An error occurred during rendering of the report. ---> Microsoft.ReportingServices.OnDemandReportRendering.ReportRenderingException: An error occurred during rendering of the report. ---> System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.ReportingServices.Rendering.SPBProcessing.Tablix.TablixContext.CalculateDetailCell(PageItem topItem, Int32 colIndex, Boolean collect, PageContext pageContext)
[code]....
The server is running in Native mode. We tried restarting the services and also verified the disk space. Neither of them worked. The ExecutionLog3 table in the "ReportServer" database shows a rrenderingError as the report execution status. Report rendering with Excel format works fine.We enabled verbose logs and they are shared here. URL....
I know that SSRS default rendering formats is HTML. is there anyway we can change this behaviour to render in XM format for specific reports.
View 5 Replies View RelatedHi,
I am trying to place text boxes in the header of a matrix in order to give each row group(i.e. each drill-down area in my matrix a header). This can be done in Reporting Services 2005.
However when I deploy this report to the corresponding url(Report Manager) it seems to be losing its formatting and not displaying correctly. The textboxes placed in the matrix header seem to go all over the place.
I do get a warning when I deploy the report ->
[rsOverlappingReportItems]. Some renderers do not support overlapping report items.
How can this be rectified?
Hi All,
For developing a report I'm using SQL Server 2000 with SP4 & MS Visual Studio .Net 2003. After expoting a report in excel format file, the size of the excel file is so much big that while openning the report file it seemed to be hanged the PC.
Is there any way to reduce the size of the excel in reporting services?
Thanks,
Uttam Kr. Dhar
Medi Assist India Pvt. Ltd.
Is Format Painter is available in SQL Server Management Studio Report Design?If not, any other way can we copy format?
View 4 Replies View RelatedI'm trying to add a custom report format to ssrs 2005 as per this [URL] I've added the code snippets in the example to three different ssrs 2005 server RSReportServer.config files but it does not work i.e do not show up in the export drop down when rendering report.
I've tried starting and stopping reporting services and it still does not works.
I've also modified the existing csv extension with different options to see if it works but to no avail.However it works with SSRS2008 R2 . In fact it works right after I saved the config file, no restart needed.For SSRS2005 the file is in C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesReportServer. I checked the registry setting just to make sure I'm looking at the correct installation 'HKEY_LOCAL_MACHINE', 'SOFTWAREMicrosoftMicrosoft SQL Server90ToolsClientSetup', 'SQLPath' The three ssrs2005 instances are in three different physical servers and the problem is with all of them so it is not an isolated incident. I've dbowner rights to all three servers. The server versions are 9.0.4060, 9.0.4035 and 9.0.4053
In an asp.net app I'm creating email attachments from ssrs reports and am rendering them In Word and Excel using the WORDOPENXML and EXCELOPENXML format extensions. When I render the report in excel, the image is sized correctly, however, when I render the same report in word, its very small. I will attach a screenshot of each, and in the word screenshot, I will select the image so you can see the image control's outline (the control's actual size). Notice the image inside of the border is very small. How can I resolve this?
first, excel:
and now in word:
We migrated ssrs from 2008 to ssrs 2014.after that we need to move only subscriptions to New 2014 report server DB.
How to proceed that.
I am trying to insert record in DB. But subscription ID is not identity column. How to do this.
Can I place old Subscription IDS in New 2014 reporting DB?
Where can I get a trial/evaluation version of Sql Server 2005 Reporting Services?
I dont have SQL SERVER 2005 Installed on my Pc.
Hi there,
I'm trying to install the common components for SQL 2005 on a server that already has Reporting Services 2005 installed on it. It keeps comng up with an error:
"To change an existing instance of Microsoft SQL Server 2005 to a different edition of SQL Server 2005, you must run SQL Server 2005 Setup from the command prompt and include the SKUUPGRADE=1 parameter."
The Reporting Services install has had SP2 applied to it, would that be what is messing up the install?
I have very little experience with SQL so any info would be helpful.
Thanks!
I am getting this error when upgraded to SQL Server 2012. Earlier the same report(.rdl) just working fine on SQL Server 2008 R2.
Message = System.Web.Services.Protocols.SoapException: The value of parameter 'param' is not valid. ---> Microsoft.ReportingServices. Diagnostics. Utilities.InvalidParameterException: The value of parameter 'param' is not valid. ---> System.UriFormatException: Invalid URI: The Uri string is too long.
Is there anything changed in SQL Server 2012 regarding this.
I have created SSRS report which has many overlapping objects, the output in PDF format seems to good but in word format it is not giving the required output.
View 5 Replies View RelatedDELETED ORIGINAL LOAD AND TRIED TO REINSTALL. CANNOT START LOCAL SERVER
View 1 Replies View RelatedI want to create subscription for a report.
While creating it gives error "Operation is not valid due to the current state of the object".
I am able to create subscription for other reports deployed. But it gives error for subscription of a particular report.
Tried deploying the report with other name then too it does not allow me to create subscription.
I have a table with one of the column(EmpHiredate) datatype is char(10). It has value like "20141023". I need to display this value as date format(dd/mm/yyyy) in report. Following methods i tried in textbox expression but no luck.
=Format(Fields!EmpHireDate.Value,"dd/MM/yyyy")
=Cdate(Fields!EmpHireDate.Value)
Error:[rsRuntimeErrorInExpression] The Value expression for the textrun ‘EmpHireDate.Paragraphs[0].TextRuns[0]’ contains an error: Conversion from string "20041023 " to type 'Date' is not valid.
Is it possible to convert string to date using SSRS textbox expression ?
How to align the text in justify format In SQL server Reporting Services? Is there any code to do so?
Hi,
I'm having problems navigating from one report to another one if the second report has a multi-valued report parameter. When I navigate to the second report, I don't pass any parameters, but I get an error "parameter is missing a value" for the multi-valued report parameter. I have it setup as allow "multi-value" and "blank value". Any idea what the issue might be?
Thanks.
I have a report which works fine with visual studio but when i uploaded the same into report server and tries to access it through IE or chrome or anything its dam slow.
how to get rid of this issue?
I'm trying to sum a column in a report. in Most columns I can just wrap the row level expression with "Sum()" and it works. However, I have run into a few that give the following error. The Value expression for the text box ‘Textbox241’ specifies a scope that is not valid for a nested aggregate. The scope must be the same name of the scope specified by the outer aggregate or the name of a group or data region that is contained in the scope specified by the outer aggregate.Here is my row level expression that works.
=Code.Divide(sum(Fields!WeeklyUnits.Value),sum(Fields!EstUnits.Value))
*
(Code.Divide(sum(Fields!EstHours.Value),sum(Fields!EstHours.Value,"Job")))
Here is my attempt to Sum the row level for the footer area.
=Sum(Code.Divide(sum(Fields!WeeklyUnits.Value),sum(Fields!EstUnits.Value))
*
(Code.Divide(sum(Fields!EstHours.Value),sum(Fields!EstHours.Value,"Job"))))
i have created one package in production server called User_Import,It will fetch the info from excel file to the Sql table, I have executed this package in ssis console successfully,But i have to schedule one job using this package on daily basis for that i have created on sql job using this package, Then it is failing i dont know the exact problem,I have full access to my database and full access to the sql agent to exuete any jobs,I have sharing the error message which am getting in the sql agent level, Please find the error msg:
05/11/2015 15:10:20,User_Imports,Error,1,SFRFIDCSCDB003PSQCM03,User_Imports,AD_User Load,,Executed as user: SFRSA-SFR-SQCM-02. Microsoft (R) SQL Server Execute Package Utility Version 10.50.1600.1 for 64-bit Copyright (C) Microsoft Corporation 2010. All rights reserved. Started: 15:10:20 Error: 2015-05-11 15:10:20.41 Code: 0xC0011007 Source: {8E9D75BC-AA22-4366-9AC5-1507DA7AB21B}
Description: Unable to load the package as XML because of package does not have a valid XML format. A specific XML parser error will be posted. End Error Error: 2015-05-11 15:10:20.41 Code: 0xC0011002 Source: {8E9D75BC-AA22-4366-9AC5-1507DA7AB21B}
Description: Failed to open package file "C:UserssccmadminDocumentsVisual Studio 2008ProjectsUser_ImportsUser_ImportsUser_Imports.dtsx" due to error 0x80070005 "Access is denied.". This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format. End Error Could not load package "C:UserssccmadminDocumentsVisual Studio 2008ProjectsUser_ ImportsUser_ ImportsUser_ Imports.dtsx" because of error 0xC0011002.
Description: Failed to open package file "C:Userssccmadmin DocumentsVisual Studio 2008 Projects
User_ImportsUser_ImportsUser_Imports.dtsx" due to error 0x80070005 "Access is denied.". This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format. Source: {8E9D75BC-AA22-4366-9AC5-1507DA7AB21B} Started: 15:10:20 Finished: 15:10:20 Elapsed: 0.015 seconds. The package could not be found. The step failed.,00:00:00,0,0,,,,0
I am trying to create a column chart that calculates the percentage of computers in our IT environment that are Actively communicating to our SCCM Server.
I have two datasets:
1. Total_Count_Of_AD_PC DataSet.
2. PC_With_Active_SCCM_Clients dataset.
Basically i wan to calculate the percentage for each Region (i.e. AP for Asia Pacific, EMEA, Americas).
Below is the Total_Count_Of_AD_PC Dataset screenshot.
Below is the PC_With_Active_SCCM_Clients dataset.
Below is the expression that i used that is causing the error.
=CountDistinct(IIf(Fields!Region.Value="AP", "PC_With_Active_SCCM_Clients"),(Fields!Name.Value, "PC_With_Active_SCCM_Clients"),Nothing)/CountDistinct(IIf(Fields!Region.Value="AP", "Total_Count_Of_AD_PC"),(Fields!name.Value,
"Total_Count_Of_AD_PC"),Nothing)
Below is the error message....
The Y expression for the chart ‘Chart2’ has a scope parameter that is not valid for an aggregate function. The scope parameter must be set to a string constant that is equal to either the name of a containing group, the name of a containing data region, or the name of a dataset.
Hello,
I am using 'SQL Server 2005 Reporting Service' in my project. I am using sub-reports in many cases. Whenever I export such reports containing sub-reports to 'Excel' format which is the major client requirement in our project, the exported excel file shows 'Subreports within table/matrix cells are ignored.'
Can anybody tell me the solution for this? If not possible in reporting service then is there any other way to get data in excel format?
Thanks.
-Salil
How could I know the version of Reporting Services in my machine?
thanks
HI, can anybody help me?
I have a problem. With the sqlserver 2005 sp2 some behavieur are differt from previous versions.
For example with service pack 1 there isn't the "select all" option for multi value parameters, so i add MY select all, but with service pack 2 there is the "select all" option for multivalue paramteres, so when my reports are running under a server with service pack 2 in the list of multivalue parameter I'm going to find "Select all" and "MY select all"
It is possible to know at runtime under which version my repors will be running? so I can use or not MY select all. (i cannot force client with a particular version)
Thank in advance