Is there a way to subscribe SSRS report using dynamic parameters for email and trigger the report from autosys job so that report should generate the exact time the job is triggered.Let me describe, my SSRS report should be triggered on success of one autosys job. i need to send email parameter and time of report schedule from this autosys job.
View 3 RepliesHi,
I have a need to display on screen AND email a pdf report to email addresses specified at run time, executing the report with a parameter specified by the user. I have looked into data driven subscriptions, but it seems this is based on scheduling. Unfortunately for the majority of the project I will only have access to SQL 2005 Standard Edition (Production system is Enterprise), so I cannot investigate thoroughly.
So, is this possible using data driven subscriptions? Scenario is:
1. User enters parameter used for query, as well as email addresses.
2. Report is generated and displayed on screen.
3. Report is emailed to addresses specified by user.
Any tips on how to get this working?
Thanks
Mark Smith
I am trying to develop a report from cube,and it has one drill through report.when i click on sales amount field on main report,then it open the drill through report with details.Here i passed the **(category,subcat,product)parameters(Cascaded)** to drill through report in action part of main report.In my main report i have two columns .
columns are **Level** and **Salesamount**.
Values are like
**[-]category** **100**
**[-]subcat** **50**
**product** **30**
when i click on 100, parameters are passed & it open the detail report correctly, but when i click on 50,the values for subcat parameter is not getting values in detail report and same as the product also.
Here i used the expressions in parameter values
**pCategory**----iif(inscope(category),!fields.category.value,split(join(Parameters!category.value,","),","))
**psubcat**----iif(inscope(subcat),!fields.subcat.value,split(join(Parameters!subcat.value,","),","))
**pproduct**----iif(inscope(product),!fields.product.value,split(join(Parameters!product.value,","),","))
I need to send a report to various email id based on parameters.
I have a report which has a dropdown which shows the list of parameters. I need to send report to 3 different email ids with different parameters. How to do that?
I want to create data driven subscription via Email for SSRS report.
To do so i can add my self either in To or CC.
I don't want multiple mails in my inbox as sent mails have excel as attachment, but I want notification for all the mails sent.
I have created an SSRS report containing a bar chart. The Y-axis contains some application names which are displayed based on a certain criteria. Hence sometimes there are only 2 values in y-axis while sometimes it may range upto 20 items. I have tried a lot but have been unsuccessful in getting a dynamic y-axis which changes with the number of items present.
View 2 Replies View RelatedHow to make SSRS report page size dynamic, or in a way where viewer can set it to the size they want?
Set to 0
I have a third party app that passes parameters (main dataset query) from the app to SSRS. Unfortunately, when the parameters are passed from the app they will contain equal signs ("=") in front of each parameter. For example, the parameters that may be passed to the main dataset query should be:
"HYDRO, OKO, ONEPL, TECHNI"
However, the parameters that are passed from the app, get to SSRS as:
"=HYDRO, =OKO, =ONEPL, =TECHNI"
Again, this is for the main dataset query and there may be one parameter or there may be any number of them.
Basically, I need to strip the "=" signs from the parameters. whether there is one parameter or ten.
I believe that I will need a custom function to strip the equal signs?
I am displaying the red line in the beginning of the current week column in the matrix table. But for few resources the red line is missing. For Example in below screenshot, refer the 'Adrian Larkin' resource. Here is the SSRS report border expression which is comparing the [TimeByDay] with the current Week First Monday Date to display the red bar -
=IIf(Fields!TimeByDay.Value = DATEADD("d", -(WeekDay(Today(),2))+1, Today()), "Red", "Black")"
Here is the dataset result set. If you refer the column [TimeByDay], it has no record for the date 11/05/2015 for the Adrian resource as he has no assignment for the date 11-05-2015.display the red missing line red bar using the expression or any other solution.
I made one report in SSRS 2008 in which getting data from one SharePoint List.
three parameters in report :
Country
StartDate
EndDate
I am using query which I created with CAML.
query is running well and data is coming correctly if I run this on Query designer.and date format must be YYYY-MM-DD.but when I try to run through on run time then the date control is showing format dd/mm/yyyy.
I change the regional settings of windows and SharePoint site to English(United States). and when I select date control it is also putting date in format like "YYYY-MM-DD'. and in that format report is working well in Query designer view.But on run time still it is not working.
We have the customer requirement to display the footer of a SSRS Report fixed at the absolute bottom of a DIN A4 format page. The footer contains information like company address and stuff.
I searched quite a while on this topic and only found workarounds for SQL Server 2005 with Custom Code in the SSRS Report to calculate the size of the body content and then insert some empty lines to get the space needed to push the footer to the bottom of the page. But this won't work in SQL Server 2012. And I wasn't able to figure out how to achieve this yet.
We have SSRS reports (pointing to SQL 2012) containing cascading parameters that we have deployed on SharePoint 2013 and once a user makes a selection to the parent parameter, child parameters are getting refreshed based on the selection in the parent parameter and then we see this:
Once we hit Apply, the Loading image comes up and approximately10 seconds later, The whole webpage gets refreshed and the parameter selections get reset to default parameters.
This is getting frustrating because there are about 10 parameters in the report and once a user makes selections and hit apply if the page gets reset, the user has to make all the selections again.
We are working with Microsoft support on this who suggested us to increase the timeout setting of DistributedCache service on all our SharePoint servers which did seem to work initially but I do see this issue happening occasionally.
Hello,
I have a report that uses a begin date and an end date as paremeters along with a user's email adddress to generate thier schedule for the coming week. I would like to schedule this report to run at the beginning of the week and email to each user based on thier email address. So the parameters will be system.date +1 and system.date+6 and user email. I have the users email addresses in a table so the 3rd parameter could be a "for each email in table users...". Is this posssible? Should it be in Report services or a scheduled Stored Procedure? Any help with syntax will be greatly appreciated!
Thanks,
Bob Myles
get the data from report to create data driven SSRS Subscriptions,
write query :
Running Report:
I have done the following and a domain user would not access report created a login to the SQL server to the user (this SQL Server is where data source DB is)went to site setting in Report Manager and made this use a system userright clicked on report folder and made this user in the browser roleeven checked that in the report in question, the user is already in the browser role Still the user would not access the report! "User .......... does not have required permission" is the error message I am getting.
View 6 Replies View RelatedI have written a report visual studio. The report has 10 multi-value parameters that pull data from their individual data sets within the reports. When running the report from within Visual Studio it renders fine. There are no errors reported, only a warning related to a pathname I have use to retrieve image data and display on the report.Deployment of the report is error free.When I view the report I briefly get the "Loading" splash window, but then nothing. None of the headers or static text is displayed. The results window is blank.
The report defaults all the parameter values. In trying to debug the issue I have found by reducing the number of parameter values the report will render. Once I have all the values added, the report does nothing.Below is the query being used for the report. The where clause in the query shows the parameters being used and the syntax.We are running on Windows Server 2008 R2 and SQL Server 2008 R2.
Ralph
SELECT RTRIM(a.ITEMNMBR) AS Style, RTRIM(a.ITEMDESC) AS Description, a.ITMSHNAM AS UPC, c.LOCNCODE AS Store, d.LISTPRCE AS ListPrice, a.CURRCOST AS Cost,
a.USCATVLS_1 AS [Main Category], a.USCATVLS_2 AS Market, a.USCATVLS_3 AS [Alternate Retail], a.USCATVLS_4 AS Country, b.ITEMXTRAS_1_Type AS Type,
b.ITEMXTRAS_2_Finish AS Finish, b.ITEMXTRAS_3_SubCategory AS SubCategory, b.ITEMXTRAS_4_Department AS Department,
[code]...
I have a ssrs report having 2 tables in with 4 columns in each. When I go to export option in preview I can see all data coming in one excel sheet, But I am trying to get 2 tables in 2 different pages in Excel when I export.First page of excel comes with first table data with 4 columns and second page of excel comes with second table data with 4 columns .
View 2 Replies View RelatedI'm wondering how to print a SSRS report without bringing up a report viewer. Is there way to print(PDF format) the SSRS report in the web application( .net ) directly from the "print" button without bringing up a report viewer?
View 2 Replies View RelatedHow do I get data on my linked report based on my grouped subtotal and grand total from the main report. The subtotal and grand total are calculated columns.
I have a 3 columns in my matrix in the SSRS summary report. Actn_COAST, ActnCITY and NumbOfAccts.
The following is code for my summary report. The results are shown below.
SELECT Distinct ActnCITY, Count(ACCT) as NumbOfAccts,
CASE WHEN ActnCITY in ('NY', 'OH', IN, 'NJ', 'SC', 'NC') THEN 'EAST COAST'
WHEN ActnCITY IN ('CA'. 'NV', 'UT', 'WA', 'OR') THEN 'WEST COAST'
ELSE 'OTHER'
END AS Actn_COAST
FROM tbl1
where ACTNDATE between @STARTDT and @EndDT
Code for my detail report contains the following SQL
SELECT * FROM tbl1 where ACTNDATE between @STARTDT and @EndDT AND @ActnCITY = ActnCITY
I have linked my report based on the NumbOfAccts column. I am able to get data if I click any of the NumbOfAccts values related to the state I want. However when I am not sure how to make the subtotal and grand total work. I want when I click on the subtotal of either coast, I should be able to see records of that coast e.g., if I select 37 I should be able to see all the records in East Coast. If I click on the Grand Total, I only want data related to those 2 coasts.
Hi,
I'm having problems navigating from one report to another one if the second report has a multi-valued report parameter. When I navigate to the second report, I don't pass any parameters, but I get an error "parameter is missing a value" for the multi-valued report parameter. I have it setup as allow "multi-value" and "blank value". Any idea what the issue might be?
Thanks.
How to display the logo in middle of report header , The logo is embedded in the Image folder . The column of the report are static. we are using SSRS 2008
View 6 Replies View RelatedI have a report which works fine with visual studio but when i uploaded the same into report server and tries to access it through IE or chrome or anything its dam slow.
how to get rid of this issue?
I need to create a SSRS report using the Warehouse tfs_warehouse DB Report need to be drill down on WorkItemType Parents and child values. So, If we click on Product Back Log Item will get all the tasks inside it and so on....
------->Product BackLog items
----------> Bugs Or Tasks
-----------> Tasks
I have done research and found out how to do it in OLAP cube ..but still can't figure out the TSQL query to be used.Found one of the query on forum:
SELECT * FROM DimWorkItem DWI
INNER JOIN FactWorkItemLinkHistory FWILH ON DWI.System_Id = FWILH.TargetWorkItemID
WHERE FWILH.WorkItemLinkTypeSK IN (SELECT DWILT.WorkItemLinkTypeSK FROM DimWorkItemLinkType DWILT WHERE DWILT.LinkName = N'Child')
AND DWI.System_WorkItemType = N'Task'
AND DWI.System_Rev = (SELECT MAX(DWI1.System_Rev) FROM DimWorkItem DWI1 WHERE DWI1.System_Id = DWI.System_Id)
AND FWILH.SourceWorkItemID IN (SELECT DWI2.System_Id FROM DimWorkItem DWI2 WHERE DWI2.System_WorkItemType = N'Bug');
I have a report that gets sends out through a subscription and sometimes the report has multiple pages and all those pages appear within one email.Is it possible to set the subscription in such a way that an email is sent per page when the subscription executes.
View 2 Replies View Relatedi just clicked on Advanced mode in Column Group, and then in Row Group Side i set Fixed Data=true for first top static. I'm using local report not server report and i'm displaying that local report in Reportviewer. Now also its not working....
View 6 Replies View RelatedI am trying to setup a process in which a user, who is using a vb.net 2008 application, will need to trigger the creation of two items. The first is SSRS report which will need to be exported to PDF format to a shared folder on the network.
This report accepts one parameter. The second thing that will need to be created at the same time is an excel file with data exported from SQL Server 2008 which is generated through an SSIS package. A couple things to note. The excel file and the pdf file need to have the same file name, other than the extension.
For example P00000001_20100831.pdf and P00000001_20100831.xlsx and will both be stored in the same network share. The filenames need to be created dynamically at run time and will be based on a parameter being passed to the report.
So far I have the portion that creates the excel file working fine. The way I create that is as follows. I have a stored procedure that creates a job which calls the SSIS package and passes the appropriate parameters to the SSIS package.
After the job is created I immediately run it and then delete the job. Ok, everything works fine with that.
Now I cant seem to figure out how to get the pdf created. If possible I would like to keep this portion together with the already created job or package. I am running SQL Server 2008 standard so the data driven subs are out. I have thought about create a time subscription and then just using a SQL task in the package to execute the subscription but couldnt figure out how to pass the parameter to the report and create the filename.
I would like to configure the permitted hosts setting for the Report Server. According to MSDN, the Syntax is:
<PermittedHosts>
<HostName>Adventure-Works.com</HostName>
<HostName>hotmail.com</HostName>
</PermittedHosts>
In case of having only one host, is the <HostName> tag mandatory? I was not able to find more information regarding the xsd on which the configuration file is based. To be more specific, is it possible to define the PermittedHost like this or will this result in an error?
<PermittedHosts>Adventure-Works.com</PermittedHosts>
Hi guys & gals
I'm just setting up Reporting Services for our company and it's a great product, no doubt about it. However, I've come across a problem I can't solve and I wonder if any of you can help.
I've produced a sales report and I want my users to be able to enter a list of sales periods to include on the report. For example, the user might want to view the report for periods 10,11,13,14 and 17 and exclude periods 12,15 and 16. Obviously, the underlying query will probably involve an IN() clause but I'm struggling to think of a way that the user might be able to enter these parameters.
The most obvious way might be by typing in a comma separated string, but I don't know how to then put those values into the query.
Anyone got any ideas?
i am trying to generate a report based on 3 parameters
age, location, ethnciity
every thing works fine in data and layout tab,
when i run the preview tab, it give me the option to input paramaters and then when i hit veiw report, it shows processing report.... (indefinite) time.
i tried executing the query in data tab, it takes less than a sec.
any ideas??
am i doing somethign wrong in parameters??
1 report but different departments run this report with different parameters. Atm I have copied this report for the 4 departments and adjusted the default parameters accordingly (highly inefficient). Isn't there a way to just have one report and that I can adjust the default parameters in code based on user or group ?
View 6 Replies View RelatedWe are trying to use reporting services to execute a url when the SSRS report is executed. For example when I execute a SSRS report I would like the report to automatically access [URL] (as an example). The reason we are doing this is we want to access another reporting application but record the number and times of access via the reporting services execution tables/views. Is this achievable by putting some code in the Report properties. Can you open - execute url and then close report via some code.
View 3 Replies View RelatedIs there any way to get the report toolbar using SOAP Api in SSRS reporting.
View 6 Replies View RelatedI have a report I'm working on that provides a census of members. These members have certain properties;
Load date,Report Type,Clinic,Care Manager,PCP Name.
The census is from an outside group and what I do is massage it for our internal databases and reports to our care managers.
The report starts out by returning only those entries that were received in the last report from the outside vendor and I filter each of the parameters by using a WITH statement and an INNER JOIN, as follows;
WITH Date_of_Most_Recent_Census AS
(
SELECT
MAX(Load_Date) AS [CurDate]
FROM
Census_Rpt_Final
)
[Code] ...
The default is for all parameters to start out with all possible values for the current load date. But, I need to be able to filter the available - and default - values for each parameter based upon the selection of the other parameters.
So, the Load Date is built in by use of the CTE that is a part of all the parameters. But, I need the report to allow the end user to select from each of the others, but limiting what is avaliable for selection based upon the settings of the other parameters.
For example, the second parameter is the Report Type. It can be either "Hospital," or "SNF." But, not all Clinics, Care Managers or PCPs may have an entry in both types. So, if the user selects, say, "Hospital," all the parameters would alter their available and default values such that they only include options where the census shows they are a "Hospital" entry.But, not all Clinics in the most recent census may have both report types. So, if the end user selects a particular clinic, it would also recalculate the available and default values for Report Type, as well as those beneath it on the list. And, likewise for the remainder of the parameters.
My initial thought was to add WHERE statements to the datasets controlling each parameter, but SSRS keeps asking me to define the parameters when I click out of the dataset's properties. Now, I know that SSRS is a single pass process - and, I'll cross the bridge on adjusting parameters defined earlier in the list when I come to it - but I thought that parameters lower in the list would update, since they'd have their values defined.For instance, the Clinic parameter is after Report Type, so the code I used to set up Clinic was;
WITH Date_of_Most_Recent_Census AS
(
SELECT
MAX(Load_Date) AS [CurDate]
FROM
Census_Rpt_Final
)
SELECT DISTINCT
[code]....
But, this asks me to define @ReportType, even though it precedes Clinic on the parameter list.