Reporting Services Error When Preview/publish A Report Containing SAP BI Hierarchy
Jan 28, 2008
Hi SSRS Experts
I'm trying to create a report using a SAP BI InfoCube as my datasource.
One of the fields in the InfoCube (GL Account) consist of a 3 level hierarchy, which need to be reported on.
The query that I built using QueryBuilder executes fine and displays the hierarchies correctly, but when I preview the report, i get the following error:
An error occurred during local report processing
An error has occurred during report processing
Query execution failed for data set "SAPBWD"
The "0GL_ACCOUNT 1000IE" Object was not found.
0GL_ACCOUNT is the GL account field to report on
1000IE is the selected GL Account Hierarchy to be displayed
Here's the query that was generated using query builder:
SELECT NON EMPTY { [Measures].[D2A3Y7ANS9YOF2FONXMUS9RAI] } ON COLUMNS, NON EMPTY {[0GL_ACCOUNT 1000IE].[LEVEL03].ALLMEMBERS * [ZF_MC].[LEVEL01].ALLMEMBERS } DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS FROM [ZFGL_M03/ZREP_BOR001] CELL PROPERTIES VALUE, BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING SAP VARIABLES [ZFV_FY] INCLUDING [0FISCYEAR].[Z12007] [ZFV_PC] INCLUDING [0PROFIT_CTR 1000FS].[10000001000033] [ZFV_RM] INCLUDING [0FISCPER3].[005] [ZFV_PV] INCLUDING [0VERSION].[003]
I wrote a report today containing one grouping. Everything appears all right in the report preview, except that every other page is "blank", i.e., shows only the page header and page footer; all grouping and detail information is missing.
The data on the page following the blank page seems to pick up where the previous non-blank page left off, so all information seems to be present within the report.The report width and height properties are typical portrait-style -- 8.5 x 11 inches. The columns do not "run off the edge" of the report page boundary. I haven't selected any page break for the grouping, as the grouping detail is typically only a few rows long, and would otherwise result in a very large number of pages.
There is a multi value parameter called "include" in the report where "Allow Multiple Values" is checked and it has 4 Available values as shown in the attached screen shots and preview of the report is also shown .There is no data set for this parameter and the values will get displayed on the report based on the visibility condition set in the report.Example : If first value is selected then 1 is passed and based on the visibility condition set in the report - the report output is displayed.None is default value and has value 4 and when the report is run with this option i.e. "None" then rest three parameter values are not applicable .
Requirement : -When the end user selects (Select All) Check box then (None) -check box must be disabled or must not appear for selection for the end user -When the end user selects check boxes either of the first three except None then also None check box must be disabled or must not appear for -selection for the end user -when the end user selects a combination of first three then also None check box must be disabled or must not appear for selection for the end user -The None is set as default with a value as 4 and is applicable only when the user does not select either of the first three values and the report will run.
I am exporting SSRS report to Excel I am aware that excel doesn't show footer , It shows in print preview but my footer has text box which have text disclaimer more than 255 characters, the data getting truncated.
Is there a way to publish the MDW (Data Collection) reports (Disk Usage history, Query Statistic history, and Server Activity history ) on SSRS server?!
It is not logical for all who wants to view the mentioned reports to open the SSMS !
I've already check [URL] .... there, the writer is suggesting to recreate the reports from scratch on SSRS, that if I could figure their queries, which I don't think the only way that we have!
I have SQL Server 2005 SP2 installed and Reporting Services Addin configured. I am trying to publish a report from BIDS to SharePoint... but a box continues to pop up asking me for credencials.
What am I doing wrong? I have reviewed all the web.config files as per an earlier post referenced, but I only see one entry in the config file for the location tag. However, I did see this tag in two config files... not certain if that is something I should be concerned with?
I'd really like to just get a sample report up on the Sharepoint Server so I can move forward.
Hi everybody! I've created a report in reporting services and in it i need to have a dynamic textbox. Let me describe more.I have two reports ,in first report i have manegers' names .After that users see first report and manegers' informations for example their names and saleries , they want to select manegers on base of for example their saleries ,i mean she/he must see informations then decide and select manegers who their employees will be shown in second report ,in this case i need a textbox that the user can write Yes or No in it,and i need multiple select. After that users select their manegers they can see manegers' employees in second report. I need a textbox that has two values (Yes and No) and these values must be shown in textbox in preview mode to select by users or user can select Yes or No . Can anybody help me? ShimaS
I'm currently using Sql server 2005 Reporting Services. I'm trying to take data and fill in a form that I'm making a background image. When I go to preview all the textboxes filled with data align with the fields in the background image form. When I go to print they are off by a inch or so horizontally. Can anyone help me on this topic.
I'm using SQL Server 2008 SP3 with Reporting Services 2008 SP3.
By opening my web application in IE9 and running report, i can print and show then print preview by clicking the "Print preview" button in printing dialog.
By opening my web application in IE11 and running report, i can print the report but if I click on the print preview on the print dialog nothing appears... Why?
I am attempting to create a report in Reporting Services 2005. However, I have a problem with creating a group underneath a hierarchy group. No data displays in the group below the hierarchy group. For example, if I have a top level group called group 1 which is not hierarchical then a group 2 which IS hierarchical then group 3 under group 2 then groups 1 and 2 will not display properly. However, if I remove group 3 then the first two groups display properly. I even tried using a second reporting services table using the same data set but could not get that to work. I'm really running out of ideas. Any help is welcome. Thanks.
We run std 2008 r2. I downloaded an rdl whose 2 date/partial time cols used to expand on the server to accommodate times with two digits in hr. When I preview in vs 2008, everything is ok. But when I copy back to the server, these longer date strings now wrap to next line. Why is this? Only change was to a param's drop down ds query. expression for one of the cols is
I'm using Reporting Services 2005 SP1 and wrote some code to render reports server-side. My sample report has few parameters that must be passed so I pass these parameters with code.
byte[] report = rs.Render("PDF", "<DeviceInfo><Toolbar>False</Toolbar></DeviceInfo>", out extension, out mimeType, out encoding, out warnings, out streamID); </My code>
Actually, I have several more parameters but I've checked the collection and all the parameters I want are there and have values. Their names match those found in executionInfo.Parameters. But when I run my code I get the following error on Render():
<Error> "This report requires a default or user-defined value for the report parameter 'pClass'. To run or subscribe to this report, you must provide a parameter value. ---> This report requires a default or user-defined value for the report parameter 'pClass'. To run or subscribe to this report, you must provide a parameter value. ---> This report requires a default or user-defined value for the report parameter 'pClass'. To run or subscribe to this report, you must provide a parameter value." </Error>
I've double-checked and my parameter array does have the problematic parameter, I passed it a value but when I check executionInfo.Parameters I see that it's the only parameter that hasn't been give a default value after calling SetExecutionParameters(). So my parameters do seem to be passed but one seems to refuse getting a value. If I comment out the SetExecutionParameters() line I get, as expected a similar error but on another parameter (first one in the executionInfo.Parameters collection). So I'm left to beleive that the SetExecutionParameters() has some kind of bug as it works for all but one parameter. I've checked casing, spelling, tried passing phony parameters and from what I've seen I should be getting an error when I pass the parameters if I got something wrong.
I have a requirement,Create employee hierarchy(tree structure) with two parameters 1)OrganizationId 2) EmplyeenameIf i select one employee, it should show only the employees reporting to him. URL....I created one level, if i select one employee , i am not able to see the reporties names.
I have one view, i written below query to get employee hierarchy based on orgid and employee name..
If i select employeename it shoukd show employee reporties(under employees and below employee reporties like tree structure)
It is running fast in SSMS Level, but it is taking more time in SSRS(Sql Sever Report Services), If i run this query in SSRS,Some times System not responding.
Declare @OrgId int Declare @EName varchar(30) Set @OrgId=56793 Set @EName='ABCD' Select EmpId
I want to enable a drill down on a parent child hierarchy, just as it is possible in the Analysis Services.
An Example :
Hierarchy in a company : Jack (1) is the boss, Frank (2) and Andy (3) ar the Semi-Bosses , and Julia (4), Jane (5), Henry (6), Michael (7), Will (8) , Dave (9) are normal employees . Timmy(10) is a trainee. Furthermore Frank is responsible for Julia,Jane and Henry and Andy is responsible for Michael WIll and Dave. Dave is responsible for Timmy. So we get the following tree hierarchy structure.
1 2 3 4 5 6 7 8 9 10
My Employee Dimension Attributes : Name, Parent
I want to make a report, where I show the salary of each employee. But at first the user only sees 1, when he drills down he sees 2 and 3, too. When he drills down once more he sees 4 5 6 and 7 8 9, too (The user must be able to recognize which person is responsible for 456 and which for 789). And the last drill down shows 10, for which 9 is responsible ( exactly as it is possible in the analyis Service in the Cubebrowser)
I have read some posts where are MDX examples which are similar to my problem, but they did not solve my problem.
My report worked fine for a while, but suddenly I started getting the following errors for Preview:
An error occurred during local report processing.
An error has occurred during report processing.
Index was outside the bounds of the array.
I restarted VS, then rebooted my machine and the problem persists. Everything including the report posted to the server works fine. It is just the Preview of this report does not work any more. Preview of other reports work fine.
Any tip to resolve this problem would be greatly appreciated.
I have created a project using MVC 4 application.i have created a dataset model and .rdlc file using report viewer but i'm getting the following error when i run it.
For a week now, I have been reading every fix I can find for the infamous Reporting Services error(s) and none of the fixes have worked for me. I have checked permissions and memberships of the reporting services groups, removed xmlns as mentioned, made sure that the Classic App Pool was being used, started, stopped, reinstalled, made sure the RSWebApplication.config had the URL or not, either way nothing is working for me.
Is there some place where all of the various fixes are consolidated? Can anyone help me? I'm dying over here. It worked on a previous image and I rebuilt it and can't get it to work. I have SQL 2005 sp2 on Vista...all of the IIS requirements are met and the RS configuration utility reports that everything is fine.
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rrRenderingError</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An error occurred during rendering of the report.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rrRenderingError&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.5343.0</HelpLink><ProductName
I am trying to export ssrs report from sharepoint to pdf file.But i am getting error in it."Sorry, Something Went Wrong".But when i try to render report in visual studio when i preview report. It gets exported in 14 minutes. but there is no error.
1. While connecting to the Reporting Services Engine (Using SQL Server Management Server). The error message is given below. Report Server is working fine, I am able to browse the reports from the report server.
------------------------------------------------------------------------------------------------------------------------------------------------------------ TITLE: Connect to Server ------------------------------ Cannot connect to BTP8NMB03. ------------------------------ ADDITIONAL INFORMATION: Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'. The request failed with the error message: -- <HTML dir="ltr"> <HEAD><meta name="GENERATOR" content="Microsoft SharePoint" /><meta name="progid" content="SharePoint.WebPartPage.Document" /><meta HTTP-EQUIV="Content-Type" content="text/html; charset=utf-8" /><meta HTTP-EQUIV="Expires" content="0" /><meta name="ROBOTS" content="NOHTMLINDEX" /><title>
<table width=100% border=0 class="ms-titleareaframe" cellpadding=0> <TR> <TD valign=top width="100%" style="padding-top: 10px" class="ms-descriptiontext"> <span id="ctl00_PlaceHolderMain_LabelMessage">The file you are attempting to save or retrieve has been blocked from this Web site by the server administrators.</span> <P><span class="ms-descriptiontext"> <span id="ctl00_PlaceHolderMain_helptopic_troubleshooting"><A Title="Troubleshoot issues with Windows SharePoint Services. - Opens in new window" HREF="javascript:HelpWindowKey('troubleshooting')">Troubleshoot issues with Windows SharePoint Services.</A></span>
2. When I try to connect to the Report Manager. I get the error "The request failed with HTTP status 400: Bad Request."
The log file contains the following information: ------------------------------------------------------------------------------------------------------------------------------------------------------------- <Header> <Product>Microsoft SQL Server Reporting Services Version 9.00.3042.00</Product> <Locale>en-US</Locale> <TimeZone>India Standard Time</TimeZone> <Path>D:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesReportServerWebApp__05_20_2008_20_12_13.log</Path> <SystemName>BTP8NMB03</SystemName> <OSName>Microsoft Windows NT 5.2.3790 Service Pack 2</OSName> <OSVersion>5.2.3790.131072</OSVersion> </Header> w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing ReportBuilderTrustLevel to '0' as specified in Configuration file. w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file. w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing MaxScheduleWait to default value of '1' second(s) because it was not specified in Configuration file. w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing DatabaseQueryTimeout to default value of '30' second(s) because it was not specified in Configuration file. w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing ProcessRecycleOptions to default value of '0' because it was not specified in Configuration file. w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing RunningRequestsScavengerCycle to default value of '30' second(s) because it was not specified in Configuration file. w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing RunningRequestsDbCycle to default value of '30' second(s) because it was not specified in Configuration file. w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing RunningRequestsAge to default value of '30' second(s) because it was not specified in Configuration file. w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing CleanupCycleMinutes to default value of '10' minute(s) because it was not specified in Configuration file. w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file. w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing WatsonFlags to default value of '1064' because it was not specified in Configuration file. w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing WatsonDumpOnExceptions to default value of 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' because it was not specified in Configuration file. w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to default value of 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' because it was not specified in Configuration file. w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing SecureConnectionLevel to default value of '1' because it was not specified in Configuration file. w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file. w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing WebServiceUseFileShareStorage to default value of 'False' because it was not specified in Configuration file. w3wp!ui!5!5/20/2008-20:12:17:: e ERROR: The request failed with HTTP status 400: Bad Request. w3wp!ui!5!5/20/2008-20:12:17:: e ERROR: HTTP status code --> 500 -------Details-------- System.Net.WebException: The request failed with HTTP status 400: Bad Request. at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods() at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods() at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname) at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection() at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level) at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args) at System.EventHandler.Invoke(Object sender, EventArgs e) at System.Web.UI.Control.OnInit(EventArgs e) at System.Web.UI.Page.OnInit(EventArgs e) at System.Web.UI.Control.InitRecursive(Control namingContainer) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) w3wp!ui!5!5/20/2008-20:12:18:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted. at System.Threading.Thread.AbortInternal() at System.Threading.Thread.Abort(Object stateInfo) at System.Web.HttpResponse.End() at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm) at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal() at System.Threading.Thread.Abort(Object stateInfo) at System.Web.HttpResponse.End() at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm) at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) w3wp!ui!7!5/20/2008-20:12:26:: e ERROR: The request failed with HTTP status 400: Bad Request. w3wp!ui!7!5/20/2008-20:12:26:: e ERROR: HTTP status code --> 500 -------Details-------- System.Net.WebException: The request failed with HTTP status 400: Bad Request. at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods() at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods() at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname) at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection() at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level) at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args) at System.EventHandler.Invoke(Object sender, EventArgs e) at System.Web.UI.Control.OnInit(EventArgs e) at System.Web.UI.Page.OnInit(EventArgs e) at System.Web.UI.Control.InitRecursive(Control namingContainer) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) w3wp!ui!7!5/20/2008-20:12:27:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted. at System.Threading.Thread.AbortInternal() at System.Threading.Thread.Abort(Object stateInfo) at System.Web.HttpResponse.End() at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm) at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal() at System.Threading.Thread.Abort(Object stateInfo) at System.Web.HttpResponse.End() at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm) at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) w3wp!ui!1!5/20/2008-20:25:18:: e ERROR: The request failed with HTTP status 400: Bad Request. w3wp!ui!1!5/20/2008-20:25:18:: e ERROR: HTTP status code --> 500 -------Details-------- System.Net.WebException: The request failed with HTTP status 400: Bad Request. at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods() at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods() at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname) at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection() at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level) at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args) at System.EventHandler.Invoke(Object sender, EventArgs e) at System.Web.UI.Control.OnInit(EventArgs e) at System.Web.UI.Page.OnInit(EventArgs e) at System.Web.UI.Control.InitRecursive(Control namingContainer) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) w3wp!ui!1!5/20/2008-20:25:19:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted. at System.Threading.Thread.AbortInternal() at System.Threading.Thread.Abort(Object stateInfo) at System.Web.HttpResponse.End() at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm) at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal() at System.Threading.Thread.Abort(Object stateInfo) at System.Web.HttpResponse.End() at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm) at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
I have installed SQL Server 2005 with Reporting Services on Windows Server 2003. I can run through reporting services configuration and completed all the required steps to initialize it. I can access the reports through //localhost/reportserver and I can also access the reports through Microsoft CRM. But I cannot access the Report Manager (//localhost/reports). I get this Error: Server Error in '/Reports' Application.
Could not load file or assembly 'ReportingServicesWebServer' or one of its dependencies. The system cannot find the file specified. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.FileNotFoundException: Could not load file or assembly 'ReportingServicesWebServer' or one of its dependencies. The system cannot find the file specified.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Assembly Load Trace: The following information can be helpful to determine why the assembly 'ReportingServicesWebServer' could not be loaded.
WRN: Assembly binding logging is turned OFF. To enable assembly bind failure logging, set the registry value [HKLMSoftwareMicrosoftFusion!EnableLog] (DWORD) to 1. Note: There is some performance penalty associated with assembly bind failure logging. To turn this feature off, remove the registry value [HKLMSoftwareMicrosoftFusion!EnableLog].
Stack Trace:
[FileNotFoundException: Could not load file or assembly 'ReportingServicesWebServer' or one of its dependencies. The system cannot find the file specified.] System.Reflection.Assembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) +0 System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +211 System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +141 System.Reflection.Assembly.Load(String assemblyString) +25 System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +32
[ConfigurationErrorsException: Could not load file or assembly 'ReportingServicesWebServer' or one of its dependencies. The system cannot find the file specified.] System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +596 System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai) +70 System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection compConfig) +177 System.Web.Compilation.BuildProvidersCompiler..ctor(VirtualPath configPath, Boolean supportLocalization, String outputAssemblyName) +180 System.Web.Compilation.ApplicationBuildProvider.GetGlobalAsaxBuildResult(Boolean isPrecompiledApp) +3561465 System.Web.Compilation.BuildManager.CompileGlobalAsax() +51 System.Web.Compilation.BuildManager.EnsureTopLevelFilesCompiled() +462
[HttpException (0x80004005): Could not load file or assembly 'ReportingServicesWebServer' or one of its dependencies. The system cannot find the file specified.] System.Web.Compilation.BuildManager.ReportTopLevelCompilationException() +57 System.Web.Compilation.BuildManager.EnsureTopLevelFilesCompiled() +612 System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters) +521
[HttpException (0x80004005): Could not load file or assembly 'ReportingServicesWebServer' or one of its dependencies. The system cannot find the file specified.] System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +3540923 System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +69 System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) +275
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
Any ideas? I have done some searching, but could not find any viable solutions. Please Help
I have a report in SSRS 2008 R2 that has multiple subreports, in fact the report uses the same subreport twice with different parameters. Then that subreport also has a subreport, which has a subreport. (It's a complex data scenario with a hierarchy that can go up to three layers deep.) The report renders fine in report viewer, but when I try to export to PDF I get the following error:
Object reference not set to an instance of an object.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.Reporting.WebForms.ReportServerException: Object reference not set to an instance of an object.
Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
[Code] ....
Each subreport renders correctly to PDF, and if I remove either subreport from the main report, it also renders correctly. But the two subreports together on the report cause the error.
Removing the third hierarchy layer (the final one) fixes the issue. Is there a limit to the number of nested subreports when rendering to a pdf?
I have created a .rdlc file in MVC application. I have used Matrix in report and also i have bar charts. Issue is when I view the report in my application--all the months data and all the years data is getting summed up..
ex: it should display like jan feb mar 1 2 3 but it is coming like Mar 6
I have group by as Month for Month columns and Year for Year columns, how to fix this error.
whenever I try to create a PowerView report on an existing powerpivot- excel sheet I get following error:"An error occurred while loading the model for the item or data source 'xxx'. Verify that the connection information is correct and that you have permissions to access the data source." Error details:
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'http://intranet/PowerPivot/PowerPivot-Galerie/Mappe1.xlsx'. Verify that the connection information is correct and that you have permissions to access the data source.</Message>
[code]...
When I try to open the PowerPivot sheet form Power Pivot Gallery and click on any filter I receive following message: An error occurred during an attempt to establish a connection to the external data source. The following connections failed to refresh: PowerPivot Data.
I wrong a custom code in my report - Public shared Function Myfunc and in the header textbox - I tried to reference this code = Code.Myfunc.... the Myfunc gives an error Unrecognized identifier.The code is written in the report properties = Code Tab.
I have installed sql server 2005 along with reporting services... though i am able to design report using business intelligence studio... i am unable to access the report server.... while trying to start the reporting services configuration manager it says no report server found on the specified machine...Invalid Namespace... the installation is local ...
Due to this problem inspite of designing the entire report i am unable to deploy it on the web..since it is asking for a report server...
