Reporting Services - Exec SP Before Retrieving Datas
Jan 30, 2008
Hello,
I have a report in reporting services which has use many datasets.
Those datasets retrieve data from a same table.
Each Dataset use a store procedure.
In the first store procedure (associated to the first dataset), i call an another store procedure which fill the table.
My problem is that datasets haven't datas retrieved in the order of their position. So the third (for exemple) can begin retrieve data while the first store proc (called in the first dataset) is still running.
I had logging start/finish time of each SP and it appears that Dataset are retrieved in an asynchronous way.
Does anyone face the same problème. Is there a solution to execute an store procedure before retrieving data ?
I am trying to migrate my reports from SQL server 2000 reporting services 32bit to 2005 64bit. I am following the migration steps that MS specified. Restored my Reportserver and ReportserverTempDB databases Then I was using the configure Report services to upgrade these databases but I always end up getting the follwoing exception when I run the upgrade on the "Database Setup" configuration for 'ReportServerTempDB' database System.Data.SqlClient.SqlException: Could not locate entry in sysdatabases for database 'ReportServerTempDBTempDB'. No entry found with that name. Make sure that the name is entered correctly. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Common.DBUtils.ApplyScript(String connectionString, String script) at ReportServicesConfigUI.SqlClientTools.SqlTools.ApplyScript(String connectionString, String script)
It's driving me crazy, why is it looking for 'ReportServerTempDBTempDB' in the catalog instead of 'ReportServerTempDB'? Is it possible to migrate from 32bit to 64bit?
I'm attempting to obtain a cost effective solution for my existing customers to develop reports on their SQL 2000 Server installations using their Reporting Services 2000. With products like Visual Basic.NET 2003 becoming almost impossible to obtain, I have at least one customer who is running into a dead end.
One option possibly is the SQL Express with Advanced Services download, which has Reporting Services. My questions are as follows:
Can the report designer component of SQL Express Reporting Services be configured to connect to an external database (which would happen to be a SQL 2000 database) to establish its datasets? Does the resultant designed report end up in an RDL file? If the customer published this report via the Reporting Services 2000 Report Manager, would the report be able to run?
Sorry for asking a question like this that I could probably answer on my own, but my customer needed this answer yesterday. I have scoured the web and microsoft sites - and posted a question on the official SQL Reporting Services cateogy ... in an attempt to answer the basic question of how to design reports for Reporting Services 2000 in the absence of Visual Basic.NET 2003 (or other .NET 2003 tools) with no success.
I work in a big project and we will begin in using reporting services as the base technique for reports and I will be responsible for this part. but I have a problem I will discuss in the following:
Currently: We use currently devexpress reports and we have 2 languages(Arabic and English). the data in tables saved in two ways (Arabic and English). when the end user change the language of the web site the report data language changed when run it.
Example:
we have table with (ID, NAME_AR, NAME_EN, JobTitle_AR, JobTitle_EN). designed report will display(ID, NAME_EN, JobTitle_EN) . but the end user change the language of the system the report will
Hi! I'm a novice in asp .net I've a SqlDataSource component on an Aspx page.In the associated C# file, I would like to use datas from the query stored in the SqlDataSource component.How to do this? Thanxs :)
I am a student in a compagny because it´s my training. But, I must use MS SQL server and i don´t know at all this software ! I must import datas , which are in a ascii form, into MS SQL serveur 7,0.
Can you give me further information please, because it´s not easy at all ! thanks
i want to get some results but only for one month. like that;
select * from News where PubDate = month(9)
i tried use between dates but i got errors because all of months aren't 30 or 31 days ... For example February is 28 days sometime.. So how can i get a month results...
Hello, i am using sql server ce 2.0 for my device application.but this database sometimes gets corrupt,and i am not working with big size datas,if sdf file's size grow up,sdf file's performance gets knock out. for example: work with 50 mb data..what can i do?please somebody help me ?
Hi, All. For insert new entry...I used dataset and first all entry in dataset then i insert this dataset into datatabel of database. For update edit entry....First i bind tabel to dataset then i update,delete in dataset then i insert dataset to database then there are problem that is there are once again entry of dataset to that tabel. I also solved this problem by delete record which bind to dataset on save(insert )data set to database and then again insert dataset to tabel and solve it. But if any other option for it then plz replay me Thanks
I am having a problem to get all datas into one table I must get datas from 2 other tables datas from the first table are columns but datas of the second table are rows
I cannot change the structure of TableA because an other application is using it as it is
TableA num | value | key 1 | a | 1400 2 | b | 1401 3 | c | 1402 4 | d | 1403 ...|... | 1403
TableB key | name | descr | value 400 | john | ok | 451
TableC (the table where I want to insert datas from Table1 and Table2)
val1 | val2 | val3 | val4 |name | descr | value 1 | 2 | 3 |4 | john | ok | 451
TableA has thousands of rows and different numbers I must get 8 different datas from TableA
so I get an horrible Query !
SELECT
TableB.name, TableB.descr, TableB.value, TableA_1.value AS val1, TableA_2.value AS val2, TableA_3.value AS val3, TableA_4.value AS val4, TableA_5.value AS val5, TableA_6.value AS val6, TableA_7.value AS val7, TableA_8.value AS val8
FROM dbo.TableB INNER JOIN dbo.TableA_1 ON TableB.key = TableA_1.key INNER JOIN dbo.TableA_2 ON TableB.key = TableA_2.key INNER JOIN dbo.TableA_3 ON TableB.key = TableA_3.key INNER JOIN dbo.TableA_4 ON TableB.key = TableA_4.key INNER JOIN dbo.TableA_5 ON TableB.key = TableA_5.key INNER JOIN dbo.TableA_6 ON TableB.key = TableA_6.key INNER JOIN dbo.TableA_7 ON TableB.key = TableA_7.key INNER JOIN dbo.TableA_8 ON TableB.key = TableA_8.key
WHERE TableA_1.num = 145 AND TableA_2.num = 80 AND TableA_3.num = 3160 AND TableA_4.num = 41 AND TableA_5.num = 50 AND TableA_6.num = 51 AND TableA_7.num = 53 AND TableA_8.num = 56
Hi guys,I have a problem with my query. What i want to happen is to populate my table EV_NOTIFICATIONDETAILS (Docownerid, CurrentSentDate, LastSentDate, detailsID, GeneralRemarks) using the datas from the two different tables EV_NOTIFICATIONHEADER and EV_DOCDETAILS.I tried to create some a query but im having a error. The problem is once i insert the data from datas to the columns Docownerid, CurrentSentDate, LastSentDate the datas are stored in the database and when i tried to insert the remaining columns TO EV_NOTIFICATIONDETAILS detailsID, GeneralRemarks getting the datas from EV_DOCDETAIL it creates a new set of records in the database. Meaning it doesn't update the records in the table EV_NOTIFICATIONDETAILS but it creates a new set of records.here's my code:INSERT INTO EV_NOTIFICATIONDETAILS (Docownerid, CurrentNoticeSentDate, LastNoticeSentDate) SELECTDocownerid, CurrentSentDate, LastSentDateFROMEV_NOTIFICATIONHEADERINSERT INTO EV_NOTIFICATIONDETAILS (detailsID,GeneralRemarks) SELECTdetailsID,GeneralRemarksFROMEV_DOCDETAIL Any ideas and suggestions will be greatly appreciated.
Our DBA has installed reporting services on a server and now in order to access the report manager, one has to be an Admin on that Server. I am guessing that there is a mistake in the configuration of Reporting Services. Usually it should allow anybody who was added to the roles in the properties section of the Report Manager, right? I have also added the users to the DB..
Also I am using Windows Authentication to access Report Catalog items (Reporting Services is installed on Server2) from a web Application(deployed on Server1) and displaying the report using report viewer. For some reason, server1 has to be in an Admin role on Server2 to access the report catalog/report. This is kinda strange for me as I don't want everybody to be an Admin on Server2. Can anybody please point in the right direction?
We have installed SQL Server 2005 with reporting services.When tried to open getting errors as below: how to avoid such errors See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
ReportServicesConfigUI.WMIProvider.WMIProviderException: A WMI error has occurred and no additional error information is available. ---> System.Runtime.InteropServices.COMException (0x8000000A) Â at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) Â [code]...
I have some problem about reporting service add-in.
After I install reporting service add-in for SharePoint, reporting service menu does not appear in Application Management Tab in SharePoint Central Administration.
I try to uninstall and re-install again, it remain not work.
We've got a requirement to build the real time report. user can browse report at any point of time and need to see the latest data(stock market) in the report.
I've few options down...
1. Directly point to OLTP database as source and write stored procedure to show result set.
2. Replicate the database and write the SP's to reports. To avoid pointing directly to OLTP db.
3. To build the datawarehouse with dim & facts to show it in reports. I prefer this as a standard method, but this would have some latency depending on trasaction load which will differ from the requirement.
We are required to gather certain information regarding reporting services.
Which reports were requested, by whom , how long did they run for, what parameters were passed etc etc.
I see that the system tables do provide some of this information, is there a 3rd party tool or something we can use to gather all this type of information for us?
Hi I have to populate some datas from sql server database and display it directly in a CSV Format or CSV file. When i run the project it should provide me an option to whether open or save or cancel the file. when i click open it should be opened and be viewed in a excel sheet in CSV format and when i click save it should ask the destination folder and should be saved there in CSV format and when i click cancel it should be cancelled and the application should be closed. pls note that all these actions should happen in the same browser and should not be redirected to anyother page. Can anybody give me the detailed description and code in Asp.Net using C# .It's very Urgent. RegardsVijay.
Hi, I have just install SQL 2005 SP2 and trying to get Window SharePoint Services V3 integrated with SQL 2005 SP2 reporting services. In SharePoint Central Administration, I select the Reporting Services Integration page and have setup the Report Server Web Service URL and Authentication Mode. I then goto Grant database access, specify the SQL server name, get promted for a username and password that has access SQL Reportserver and get the following error "The group name could not be found" Does anyone have any ideas? Thanks
We built our prod server [vm] with SQL Server 2008 R2 on Server 2008 R2. It works nicely. Then we made a copy of the VM and renamed it (so our test environment would be IDENTICAL to production). After that, SSRS was broken: I get "HTTP Error 503. The service is unavailable." I can't connect via http, or SSMS.
We have tried:
*Â Running SSRS config tool (several times)
* Running with/without the IIS Server Role
*Â Dropping & recreating the SSRS keys
*Â Recreating the ReportServer database, etc
*Â Checking all of the accounts, permissions, etc
*Â Running SQL Repair
*Â Going through the registry to fix any references to the machine's old name
*Â Uninstalling, reinstalling SSRS
* Completely uninstalling ALL of the parts of SQL Server 2008 R2, deleting all directories, removing references to SQL Server from the registry, rebooting, reinstalling everything.
None of this has worked. SSRS [R2] is still 503 on our test box.
the SSRS [NT] service seems to run, without error. The Event Viewer doesn't seem to be recording any errors. The SSRS logs say that the default URL is wrong, but we get the same error in Prod, and Prod works fine. The other SQL Logs say something about not being able to contact the service. However, as I said, the [NT] service seems to be working fine.
I think I've seen a similar post on a blog or on the forums - but it seems like this should be possible -
I have an MDX query - that works fine in SQL Enterprise Manager, and has my dimension members on columns, and my measures on the rows. When I try the same query in Reporting Services, I get the error:
"The query cannot be prepared: The query must have at least one axis. The first axis of the query should not have multiple hierarchies, nor should it reference any dimension other than the Measures dimension.. Parameter name: mdx (MDXQueryGenerator)"
Although it works when you pivot the view, I really need my data presented with the members on the columns and the measures on the rows. Another forum post mentioned using the SQL 9.0 driver, but I can't see this listed anywhere (the only one I see is the .NET framework Data Provider for Microsoft Analysis Services).
Here's what my query looks like -
SELECT { [Time].[Month].&[2006-09-01T00:00:00] , [Time].[Month].&[2006-10-01T00:00:00], [Time].[Month].&[2006-11-01T00:00:00], [Time].[Month].&[2006-12-01T00:00:00] } on COLUMNS, { [Measures].[Unique Users], [Measures].[UU Pct 1], [Measures].[UU Pct 2], } ON ROWS FROM [Cube]
I'm trying to create reports in RS2005 using AS2000 as my data source. I understand that if I use RS2005 on AS2000, I wont be able to enjoy the OLAP based parameters as in using AS2005. Does anyone know an easy way to easily use Parameters in RS2005 while still using AS2000?
I'm using Reporting Services 2005 SP1 and wrote some code to render reports server-side. My sample report has few parameters that must be passed so I pass these parameters with code.
byte[] report = rs.Render("PDF", "<DeviceInfo><Toolbar>False</Toolbar></DeviceInfo>", out extension, out mimeType, out encoding, out warnings, out streamID); </My code>
Actually, I have several more parameters but I've checked the collection and all the parameters I want are there and have values. Their names match those found in executionInfo.Parameters. But when I run my code I get the following error on Render():
<Error> "This report requires a default or user-defined value for the report parameter 'pClass'. To run or subscribe to this report, you must provide a parameter value. ---> This report requires a default or user-defined value for the report parameter 'pClass'. To run or subscribe to this report, you must provide a parameter value. ---> This report requires a default or user-defined value for the report parameter 'pClass'. To run or subscribe to this report, you must provide a parameter value." </Error>
I've double-checked and my parameter array does have the problematic parameter, I passed it a value but when I check executionInfo.Parameters I see that it's the only parameter that hasn't been give a default value after calling SetExecutionParameters(). So my parameters do seem to be passed but one seems to refuse getting a value. If I comment out the SetExecutionParameters() line I get, as expected a similar error but on another parameter (first one in the executionInfo.Parameters collection). So I'm left to beleive that the SetExecutionParameters() has some kind of bug as it works for all but one parameter. I've checked casing, spelling, tried passing phony parameters and from what I've seen I should be getting an error when I pass the parameters if I got something wrong.
I am invoking RS web services to render reports, using Apache Axis to generate stub classes from Reporting Service WSDL.
Please let me know if I can integrate Report Viewer control in the jsp where I am writing the report output. Else do I have to create my own custom tags simulating ReportViewer functionality.
My requirement for the parameter is multivalue parameter with a text box. for example when user enters aa15 it need to include product aa15. when the user enters aa15, aa16, zz15 than it needs to include all the three products. the last case is when the user enters AA** than i need to inclued all the products start with AA. when i use default multivalue parameter with data source analytical services than i am getting a drop down box. I dont want that. I need a text box where user can enter the value. 1. In sql we have a like key word to query . for example select * from product where product like "AA%". what is equavalent mdx query to get such results ? 2.How to impliment the multivalue parameters without using dropdown box?
I am facing sever Refresh issue in PPS Reports. I have Two Dashboard
Dashboard_One and Dashboard_Two
I have few Filters on both the Dashboard .
In Dashboard_One I have 2 Filters
1)Year filter where Year 2012 is my Default value 2)City Filter where "CityOne" is Default Filter Value
If I select Year"2010" in Period Filter and "CityTwo" In City Filter.I see Related reports . Now I navigate to Dashboard_Two to See Other Reports where I have few Other Filter Like "Country" where I select "CountryThree" . When I navigate Back to Dashboard_one I do not see Dashboard with Default value given to them
I still see Filter value Year=2010 and CountryFilter="CountryTwo" in Dashboard Dashboard_One .. where as I should have seen it based on the Default value given to the Filter.. How should I resolve this refresh issue which I am facing in PPS Dashboard. I do not see Default value in the Filter ,It always give the filter value which was selected later when Navigated back.
I started my Reporting Server and if I use the Internet Explorer as a Administrator everything works fine.But if I don't open it as an admin it calls "rsAccess Denied The user [...] does not have the permission...".Problem is that I want to run it in an SAP Program with an HTML Viewer. how I can get those Permissions ?By the way somehow I'm not able to create or change roles in the Microsoft SQL Server Management Studio.