Hello,
Is it possible for me to pass some parameters to the ssrs server and the server create the report and spit it out on a specified printer?
I have a situation where I am very limited in regards to rendering and printing. So, if I could just give ssrs some commands and it do the rest, that would be awesome.
Does anyone know if this is possible.
Thanks.
I am using SQL 2005 reporting to produce reports for my employer. I have run into a problem with characters not printing properly after a report is generated. On a report of names, the last name "O'Neil" is being printed "O?Neil" (without the quotes) the ' is being replaced by a ? character. This problem only happens in one section of the report and not in other sections. The report looks correct (ie: The name is O'Neil) on a screen view and when exporting the data to Excel and as a pdf file both have the name "O'Neil" displayed properly.
Any ideas on how to correct this issue?
I created a report with RS in VS.NEt and set the width and height to 8.5in by 11in from the property window. When I designed it , everything fit on one page nice and neat.
When printed it prints on two pages and the font size comes out much larger than expected. The whole document seems to have been blown up bigger and the right side of the document has been cut off. Why is this? Do I need to configure vs.net to print????
Am I missing some setting somewhere?
Other documents print out fine on this printer, so it is not the printer.
Any help would be greatly appreciated, thank you
this seems small but if I can't get the report to print out right then..........
Hi there,
I got this weird problem and I was wondering whether anyone has an idea of how to resolve this.
I have a working report on the RS server, ran the report and tried to print it straight from the page by clicking on the Print button.
When it printed, it gave me additional pages as though the margins were incorrect. I have additional space on the left of the report, which pushes it out towards the right (very slight but noticable) which ended up printing "blank pages" ( basically only the page header). Moreover it didn't print any of the page footers ( which has the page numbers).
The weird part is that, I tried to export it to PDF format, and when I take a look at the pdf version, it looked fine with no formatting errors. Even printing the pdf works great.
I was wondering whether there was some bug with the RS Server or do I need to do somethin with the config file ? please advise. thanks !
Bernard
Hi ,
I have developed some report in Sql Server Reporting services my Page orientation is portrait that is report height and width are 8.5 and 11 respectively and margins are set to 0.3 in when it is printed the pages are printed more that actually viewed Pages.
I need help from someone.
Thanks,
Nikhil
response2nikhil@hotmail.com
Hi
I can se that reports can be send by mail using subscriptions, but is it possible to use a URL request?
And if it is possible, what parameters must i add to my url or where do I find the information about it?
I use MS SS RS 2005.
:-)
Hallo,
after upload a report in a root directory I cannot open this report.
details:
- iis is configured for integreted windows authentification
- windows user und reporter are the same
- user have all rigths for the root directory
Hi
We are accessing reports through our web application. Our front end is implemented using tapestry
Our report is using four parameters. The report url is like
http://<servername>/ReportServer/Pages/ReportViewer.aspx?/<Report_Proj_Name>/<ReportName>
We are using POST requests with our report parameters defined as hidden variables.
If we use GET request, with parameters as query string then we are able to view our reports.
When I tried to access the report through web application, it gives out an error message as:
Reporting Services Error
--------------------------------------------------------------------------------
An attempt was made to set a report parameter 'formids' that is not
defined in this report. (rsUnknownReportParameter) Get Online Help
--------------------------------------------------------------------------------
For POST request, we get the above mentioned error. When I saw the view source I could see that tapestry
internally sets its own hidden variable for persisting its state in session.
formids is one of the hidden variable set by it.
How should I specify in the report that formids is not one of the report parameter.
There may be other hidden variables other than formids too that may get generated at runtime.
What setting should I do at the report end or at the application end?
Please help me find a solution for this problem.
Thanks!
I get this error message when I try to connect to Reporting Services via the Management Studio.
I can see my machine listed in the Server Name > Browse For More > Local Servers dialogue. But no luck,
Ive tried:
Servername: localhost
Servername: DED1774 (the machine name)
Servername: localhost/reportserver
Servername: DED1774/reportserver
Servername: http://ded1774/reportserver (from the rsreportserver.config file
<UrlRoot>http://ded1774/reportserver</UrlRoot>)
I've Googled the error message and found postings for solutions, but none of these helped. Can anyone suggest some simple steps I can take to try to find the issue and get the connection working?
Thanks
I am trying to deploy a shape file map of the world with 100 random data points from my dataset but get this error: "exception running the extensions specified in the config file. ---> Maximum request length exceeded". I can preview this fine in SSDT. I have read various solutions which involve editing the config file but I don't have permissions to get to these files. Is there any way to amend the maximum length either through SSMS or SSDT? If not how can I make my map size small enough to deploy? It is a very simple shape file with no colours etc and I am passing random 100 data points to it from my dataset.
View 4 Replies View Related I used the following reference code while creating this simple ASPX page with reportviewer control using VS 2005
http://www.tutorialsall.com/REPORTINGSVCS/WebFormsReportViewer-ReportServerCredentials/
ReportViewer is having following properties
ProcessingMode = "Remote",
ReportServerUrl = "/foldername/myreport
ReportPath = "http://report.mydomain.com/reports"
Even after using admin user we got the same problem
Please help
Please consider enhancing SQL 2005 Reporting Services to provide the ability to disable Clickthrough Reports (Live Links) at the Report and Export Function level. Today you can only enable or disable Clickthrough Reports at the View/Model Level for all Report Builder reports.
View 1 Replies View RelatedHello. First of all sorry for my english (I'm from Spain).
I'm using Sql server reporting services and I made a report. But when I print it, it isn't like I see in preview.
In header I have this line to display content of a textbox that is in detail:
=ReportItems!tbAlmacen.Value
I can see OK this value in preview, but when I print it this value isn't visible.
And in printed version there is one page more than in preview. Page is configured (A4) and preview is OK, but printed version is not like preview!!??
Can anybody helpme please?
View 3 Replies View Related
Hi, is it possible to print out the data tables? If, yes how to go about doing it? how to print 1 table per page?
View 9 Replies View RelatedI have a variable defined as "Country". Based on the value, the header row printed needs to be different.
I've already created a 'HeaderRow' variable that I'm able to set using a script task. But how can you set the Header text value at run time from the variable? There is no expression defined for the Header with the Flat File Destination object, and when I attempt to reference the HeaderRow variable as the Header text, the variable name is printed as the header.
Another approach I tried was to write the Header Row separately through another data flow task, but the issue here is: what is the input source when all you have is a Country variable?
I have a couple reports that have parameters on them. Problem is when the report is printed, the parameters are not displayed.
To solve this, I have added the selected values to the header section of the report in a text box. I now want to find away to hide these values when the report is being viewed on screen but visible when printed. Any suggestions are welcome. Thanks
Hi All,
I am playing with DBCC command to check the contsrainst on a perticular table (DBCC CHECKCONSTRAINTS ('myTable') WITH ALL_CONSTRAINTS), it always gives the following result:
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
nothing more than that, anyone can help please?
Cheers,
Riaz
Okay, I'm a novice! I installed Back Office with NT opperating system on my home computer. I want to learn SQL 7.0. This is incredible, but I can't launch the program. I've tried everything under Start, Programs, SQL, but nothing listed seems to get me into SQL 7.0. What am I missing? Help is most appreciated!!
View 2 Replies View RelatedSo i have the following stored procedure that inserts data into a table then returns the table ID...
ALTER PROCEDURE [dbo].[spA_FSH_InsertVslLic1]
@RegistrationDateDATETIME,
@MartimeRegNumINT,
@FishingVesselNameVARCHAR(40),
@FishingVesselTypeINT,
@OperationalStatusVARCHAR(50),
@FishingVesselBasePortINT,
@FishingVesselRemarksVARCHAR(100),
@PreviousAuthorisationVARCHAR(50),
@FishingVesselLenghtNUMERIC(18,2),
@FishingVesselWidthNUMERIC(18,2),
@FishingVesselHeightNUMERIC(18,2),
@ConstructionPlaceVARCHAR(50),
@ConstructionCountryVARCHAR(25),
@ConstructionYearDATETIME,
@ConstructionShipyardVARCHAR(50),
@ConstructionHullMaterialVARCHAR(50),
@ConstructionRemarksVARCHAR(100)
AS
BEGIN
BEGIN TRY
--insert values into tb_vessellic_vsl_fsh
INSERT INTO tb_vessellic_vsl_fsh
(
vsl_RegistrationDate,
vsl_MartimeRegNumber,
vsl_FishingVesselName,
vsl_vst_VesselTypeID_fk,
vsl_OperationalStatus,
vsl_prt_BasePortID_fk,
vsl_VesselRemarks,
vsl_PreviousAuthorisation,
vsl_OverallLenght,
vsl_Width,
vsl_Height,
vsl_ConstructionPlace,
vsl_ConstructionCountry,
vsl_ConstructionYear,
vsl_ConstructionShipyard,
vsl_ConstructionHullMaterial,
vsl_ConstructionRemarks
)
VALUES
(
@RegistrationDate,
@MartimeRegNum,
@FishingVesselName,
@FishingVesselType,
@OperationalStatus,
@FishingVesselBasePort,
@FishingVesselRemarks,
@PreviousAuthorisation,
@FishingVesselLenght,
@FishingVesselWidth,
@FishingVesselHeight,
@ConstructionPlace,
@ConstructionCountry,
@ConstructionYear,
@ConstructionShipyard,
@ConstructionHullMaterial,
@ConstructionRemarks
)
DECLARE @ID AS INT
SELECT @ID = @@IDENTITY
PRINT @ID
RETURN @ID
END TRY
BEGIN CATCH
EXECUTE spA_GEN_LogError
END CATCH
END
now in the c# code i am calling the stored procedure through this:
public void InsertVslLic1(DateTime regDate, int martimeRegNo, string vesselName, int vesselCategory, string operativeStatus, int basePort, string vesselRemarks,
string previousAuthorisation, double lenght, double width, double height, string constructionPlace, string country, int constructionYear, string shipyard, string hullMaterial,
string structuralRemarks)
{
try
{
//Open Connection
DBConnection db = new DBConnection();
db.OpenConnection();
//Create SQL string
string _sqlString = ("EXECUTE spA_FSH_InsertVslLic1 @RegistrationDate = '" + regDate
+ "', @MartimeRegNum ='" + martimeRegNo
+ "', @FishingVesselName ='" + vesselName
+ "', @FishingVesselType ='" + vesselCategory
+ "', @OperationalStatus ='" + operativeStatus
+ "', @FishingVesselBasePort ='" + basePort
+ "', @FishingVesselRemarks ='" + vesselRemarks
+ "', @PreviousAuthorisation ='" + previousAuthorisation
+ "', @FishingVesselLenght ='" + lenght
+ "', @FishingVesselWidth ='" + width
+ "', @FishingVesselHeight ='" + height
+ "', @ConstructionPlace ='" + constructionPlace
+ "', @ConstructionCountry ='" + country
+ "', @ConstructionYear ='" + constructionYear
+ "', @ConstructionShipyard ='" + shipyard
+ "', @ConstructionHullMaterial ='" + hullMaterial
+ "', @ConstructionRemarks ='" + structuralRemarks + "'");
//Execute SQL String
db.RunSQLQuery(_sqlString);
}
catch (Exception ex)
{
throw ex;
}
}
RunSQLQuery being:
public int RunSQLQuery(string sqlStatement)
{
if (_sqlConnection.State != ConnectionState.Open)
_sqlConnection.Open();
_sqlCommand = new SqlCommand(sqlStatement,_sqlConnection);
return _sqlCommand.ExecuteNonQuery();
}
Now i am stuck on how i will get the ID from the sp (that is @ID) and return it to my C# code as i need it to update the same row further on :)all i am getting till now is the number of rows 'changed' i.e. 1! any thoughts? thanks
Hi,I have quite a complicated request to do in sql.I've got on table with 3 fields (id, field1, field2) and I have toprocess a request on each of the records, one by one, and thendetermine if the status is OK for each recordsFor example, I would check if the sum of field1 and field2 is greaterthan 10.What is the best way to do this ? It has to be done in a storedprocedure. I can't return the status for each one of the records, soshould I store it in a temporary table and do a select on it from mytier application (vb.net) ?ThxSam
View 7 Replies View RelatedHi,I'm going to explain as clearly as possible:I have two tables:Relationships(relation_id, table1, table2)Relationfields(relation_id, field1, field2)In Relationships, relation_id is the primary keyIn Relationfields, relation_id is the foreign keyI have a front-end interface that allows the user to add records toRelationships and Relationfields as followed:The user selects a table1 and table2 values from listboxes. These arereal table names from sys.objects, so then the user can select fieldsof these tables on which he wants to create a JOIN.Anyway, I can easily insert the table1 and table2 into Relationships(relation_id is an auto-increment). Then I need to get the relation_idof this new Relationship (easy since I know which values I've insertedand table1-table2 associations are unique.Now the PROBLEM :I need to insert into Relationfields all the fields selectioned by theuser for each of the two tables . But the user might have selectedseveral fields from table1 and table2, so I need to pass A LISTPARAMETER to my Stored Procedure as I don't know how many values offield1 and field2 there is going to be.I hope this is clear enough. Is it possible to achieve what I want ?Should I pass an entire concatenated string with values separated bycomma or whatever and then decrypt it in the stored procedure ?Thx
View 7 Replies View RelatedI've got a table that houses the data for several routes, (routeID, pointID, Longitude, Latitude and Elevation). a set of Points make up a route. I'd like to programmatically access specific points and I'm trying to figure out how to request...say the third point in my dataset. I'm new to SQL, but I was able to figure out that I can find the row number by using the SQL syntax:SELECT ROW_NUMBER() OVER(ORDER by PointID) as 'Num', Latitude, Longitude, Elevation
FROM [PointTable]
WHERE (RouteID = 5)
But I cannot (or do not know how to) add a clause that saysAND (Num = 3) So can someone show me how to request a specific row?
I have two tables:-------- Bids-------PKBidsFKAuctionsFKUsersBidAmount-------------------FollowedLots-------------------PKFollowedLotsFKAuctionsFKUsers Fields beginning with PK are Primary keys and those beginning with FK are Foreign Keys. For each FollowedLot of a specific User, I would like the MAX BidAmount of the FKAuctions and also the MAX BidAmount of the FKAuctions of that specific User. I hope you can understand my question.Thank you!
View 7 Replies View RelatedI've got a question:
Here's my SQL statement:
SELECT username, vacation, sick, profit_sharing FROM tblUsername WHERE (username = '" & request.servervariables("LOGON_USER") & "')
This code doesn't return any values. What have I done wrong?
Thanks
due to SQL Injection Attack I use parametric sql request like this SqlConnection cnx = new SqlConnection(strCnx)) SqlParameter prm; cnx.Open(); string strQry = "SELECT Count(*) FROM Users WHERE UserName=@username "; int intRecs; SqlCommand cmd = new SqlCommand(strQry, cnx); cmd.CommandType= CommandType.Text; prm = new SqlParameter("@username",SqlDbType.VarChar,50); prm.Direction=ParameterDirection.Input; prm.Value = txtUser.Text; cmd.Parameters.Add(prm);but how do I retrieve values ndlr, I have several rowsnormally its like SqlDataAdapter ... DataSet... DataTable... foreach (Datarow datarow in DataTable.Rows) { ...... }so how do I retrieve values in parametric request ?????
View 1 Replies View RelatedHie,
I have a big request involving 24 tables working with Oracle. I`m porting my application onto SQL Server 6.5. The problem is the maximum number of tables: 16.
I did create a view with 9 tables and recontruct my query with the 15 remaining tables and the view. I tried and I got an error message:
"Msg 4408, Level 19, State 1
The query and the views in it exceed the limit of 16 tables."
Here is the query:
SELECT ENT.ENT_DOM
FROM CTI,
ENT,
IEX,
V_VAL,
V_DEV DEV_A,
VTM VTM1,
VTM VTM2,
VTM VTM3,
VTM VTM4,
VTM VTM5,
V_DEV DEV_B,
NIE,
POS,
TIE,
TLP,
TPL
There is only 16 tables...
Can anyone explain me why it does not work.
Thanks a lot.
Stephane.
Hi, (sorry for my english...)I have a probelm to build my Pivot table.Indeed, The goal is just to see an example of Table Pivot with our Database...For that, I use this link : http://www.csharphelp.com/archives4/archive623.htmlI try to adapt the code but some problems...I use visual developper, and i have installed OWC11 & .NET framework 2.0.using System;using System.Data;using System.Configuration;using System.Web;using System.Web.Security;using System.Web.UI;using System.Web.UI.WebControls;using System.Web.UI.WebControls.WebParts;using System.Web.UI.HtmlControls;using Microsoft.Office.Interop.Owc11;public partial class _Default : System.Web.UI.Page{private void Page_Load(object sender, System.EventArgs e){//determine whether or not the browser supports OWCif(Request.Browser.ActiveXControls){Response.Write("<OBJECT id='pTable' style='Z-INDEX: 109; LEFT: 8px; WIDTH:502px; POSITION: absolute; TOP: 8px; HEIGHT: 217px' height='217' width='502'classid='clsid:0002E55A-0000-0000-C000-000000000046'VIEWASTEXT></OBJECT>");//cause the object to load data on the clientResponse.Write(@"<script>document.all.pTable.ConnectionString ='" + ConfigurationManager.ConnectionStrings["TimeTrackingDB"] + "'</script>");Response.Write("<script>document.all.pTable.ResourceID = 'RESOURCE'</script>");PivotTableClass PTClass = new PivotTableClass();PTClass.ConnectionString = ConfigurationManager.ConnectionStrings["TimeTrackingDB"].ToString();PTClass.DataMember = "";PivotView pview = PTClass.ActiveView;Response.Write(pview.FieldSets.Count);}}}When i'm lauching there is an error : HRESULT E_FAIL http://fists148.free.fr/Error.JPGIf i put the last lines in commentary, public partial class _Default : System.Web.UI.Page{private void Page_Load(object sender, System.EventArgs e){//determine whether or not the browser supports OWCif(Request.Browser.ActiveXControls){Response.Write("<OBJECT id='pTable' style='Z-INDEX: 109; LEFT: 8px; WIDTH:502px; POSITION: absolute; TOP: 8px; HEIGHT: 217px' height='217' width='502'classid='clsid:0002E55A-0000-0000-C000-000000000046'VIEWASTEXT></OBJECT>");//cause the object to load data on the clientResponse.Write(@"<script>document.all.pTable.ConnectionString ='" + ConfigurationManager.ConnectionStrings["TimeTrackingDB"] + "'</script>");Response.Write("<script>document.all.pTable.ResourceID = 'RESOURCE'</script>");}}}The component is loading but it seems to be an issue with the connection database...In my web.config, I Have this : <connectionStrings><add name="TimeTrackingDB" connectionString="Data Source=PORT06139DEV_2000;Initial Catalog=TimeTracking;Persist Security Info=True;User ID=user_TTT;Password=user_TTT;pooling=false"/></connectionStrings>Error connection (http://fists148.free.fr/OWCscreen.JPG)If you have any idea, i take it...I'm deseperate :eek: Thanks By advance
View 6 Replies View RelatedHI There,
Im now working on a assignment where i have hierarchial tree structure arrangement for representing an health care. This is supported by SQL DB 2005.One of the node in the tree is dissolved and all it functionality have to ported to the other tree node which share the similar structure.
Problem in porting is complex due to the following things
1. There are capabilities and permission associated with the each node.
2.each node has a unique identifier across the three (note: though this seems to be of no problem it might become issue when search occurs for eg. a->b->c search now becomes a->b->x->n ->?).
3.Already there are messages left in the DB. Please can anyone help me how can i initiate this migration. Im very new to the design and im just started "ABCD" of it.
Thanks in advance.
Cheers,
Vidhya Rao
I am not sure if this belongs under this forum or 'New to SQL' so please feel free to move it if necessary.
Following on from an issue i have had with sysdepends and syscomments tables filling up, I have been trying to research what these tables are and how they get filled up (i.e. what is the trigger to insert a row into these tables).
Unfortunately on all my web searches and book searches i have not found anything much more than 'They are system tables'. From what i have gleaned, it looks like every time a stored procedure or database object is changed, then this will create a new entry into the sysdepends table which highlights what the new object is linked to.
Is this understanding correct? And does anyone have any other sources of information which might give me a better idea of what and how these tables are about.
Many thanks in advance.
Mark
Hi,I've got two primary keys in a table:Constraint(QueryId, ConstraintName)In a stored procedure I select {QueryId, ConstraintName} couples thatmatch some criteria, and what I want to do is specifying in my a SELECTstatement that I want all of the {QueryId, ConstraintName} that are notin my stored procedure result. With only one field, it would be easy :Select * from Constraint where QueryId not in (Select QueryId fromOtherTable)My explanations are not great but I think it's enough to understandwhat I want.Select * from Constraint where QueryId and ConstraintName not in(select QueryId ,ConstraintName from OtherTable)--> of course not correct, but then how can I do that ?Thx
View 7 Replies View RelatedHi,I have a DB where I would like to maintain a fixed size and control itby myslef.I do not have the options: "Auto-Grow" and "Auto-Shrink" enabled.[color=blue]>From time to time, without a notice, or any logging, the database files[/color]gets shrinker and this causes a database full error.As I wrote, I would like to maintain the size of the database by myselfand not automatioc by the DB server.Please help me find out what can cause this problem and how to solvethis issue.Thnaks,- Ze'ev
View 6 Replies View RelatedI Stipulate that I am the most ignorant creature in the universe, incapable of following exactly written directions available all over the internet to install Microsoft Visual Web Developer 2008 Express Edition and SQL Server Express, in a way that will enable me to make a connection to SQL Server Express.
Having Stipulated the above, is there someone out there that can explain to me, in a dumb-proof way, how to do it in a way that is understandable to the most ignorant creature in the universe?
I am running Windows XP SP2 with all the lattest updates, frameworks, etc., and using IIS.
Thanks in advance for any guidance!