My transaction log has grown to 2 Gig. But when I do a truncate transaction log. It is only 18Mb. How can I resize the physical disk space of the transaction log. I want it only to be 100 Mb. It is just wasting the disk space. Please help!
View 1 RepliesThe size of log is around 600MB and only 20MB is used...
I tried truncating the log using dbcc shrinkfile..but it doesn't truncate
Any help would be appreciated....
Thanks.
We are looking into sql 7.0 and would like to know how it handles excessively sized databases. If we restore a 6.5 database into a db on 7.0 will it automatically resize to free up disk space or will it only work for new databases which have install scripts run on it.
View 2 Replies View RelatedHi all, hope someone can give me some guidence on this.
We have a database on SQL 6.5 sp5a that is 25GB in size. The transaction log is 10GB in size. We do transaction log dumps every hour throughout the day. On a very heavy day the transaction log backup device will be just over 2GB in size. Around 8GB wasted because no-one knew how much space would be used.
Is there an easy way to resize the transaction log so we can reclaim some space. I was thinking of creating a new smaller database device, then using sp_logdevice to use the smaller device as the log and get rid of the 10GB device.
Any thoughts, ideas would be great.
Thanks
Phill
i have a report with several rectangles. How do I make the size of the rectangles fixed so that they do not resize automatically?
They appear fixed until i put a table inside. once I do that it automatically resizes
Here's my question, hopefully one of you can help me:
When you allow your log file to grow on its own, eventually it uses up all your diskspace . . so you truncate it. However, when you truncate it, it doesn't *resize* the log file, so your still out of disk space, it simply clears up room within the allocated "block" or what-not so that the db can continue to make log file entries.
So, does anyone know of a way to resize that log file without losing it's data? For example, we were thinking about truncating it, backing it up, dropping the original, and then restore the log file from the "truncated backup." Anyways, there must be an easier solution (if that one even works!) . . so please, if you have any hints, let me know.
Thanks,
David P.
I have a database which is quickly filling up its allotted data space (the database is 500MB, and the device is also 500MB). I wanted to know whether it was an acceptable procedure to:
-Dump the database
-Create a new 600MB (or more) device
-Create a 600MB database for load on that device
-Restore the dump to it.
Are there data integrity/corruption/fragmenting issues with this method? The alternatives are simply expanding the database across another device (or on the same device using DISK RESIZE), or using scripts and bcp to recreate the database from scratch. These do not seem ideal. Any opinions or comments would be greatly appreciated.
MR
Is there a way to shrink database devices in SQL Server 6.5 Other than dropping and restoring?
View 1 Replies View RelatedHave a SQL2008R2 instance on a VM where the single .mdf for the tempDb database is located on a high contention disk. I've managed to get another 60GB disk and thought it would be a good time to move the .mdf and also increase it's size and number of files.
The server has 12 cores and after a bit of reading I've decided that it would be best just to have four files for this database as the 1 file per core (-1) seems to be disputed.
-- Move the existing file to the new disk and rename it.
ALTER DATABASE tempdb MODIFY FILE (NAME='tempdev', FILENAME='E:SQLData empdb0.mdf');
-- Change the size to 1GB
ALTER DATABASE tempdb MODIFY FILE (NAME='tempdev', SIZE= 1048576KB, FILEGROWTH=5%);
-- Add three new files, all with the same size & growth
ALTER DATABASE [tempdb] ADD FILE ( NAME = N'tempdev1', FILENAME = N'E:SQLData empdb1.mdf' , SIZE = 1048576KB , FILEGROWTH = 5%)
ALTER DATABASE [tempdb] ADD FILE ( NAME = N'tempdev2', FILENAME = N'E:SQLData empdb2.mdf' , SIZE = 1048576KB , FILEGROWTH = 5%)
ALTER DATABASE [tempdb] ADD FILE ( NAME = N'tempdev3', FILENAME = N'E:SQLData empdb3.mdf' , SIZE = 1048576KB , FILEGROWTH = 5%)
-- Now restart the instance.
Also, what are peoples thoughts on percentage growth for tempDb? I've read that it's not recommend and yet it seems to be the norm.
I want to control the size of ldf files and mdf files of several databases on SQL Server 2008 in my organization (manual increase), but i have a question:
What would be the best practices (best methods) for provisioning a ldf file and mdf file? Exists any generic formula?
With this i want to avoid the shrink operation and the autogrow of sql server databases...
We have a vendor created database with 9000+ tables, one of which has about 6 billion rows. The vendor redesigned the database recently and ever since we've had terrible performance.
What the vendor did was increase any and all varchar columns (tens of thousands of columns) to 256.
Before the upgrade we had no problems creating an index on the 6billion row table, it would take 2 hours.
Now after the upgrade we've let the index creation command run for 5 days and killed it because it was consuming terabytes of logspace.
The previous design had combined column width of 1049 to what is now over 4000. The primary key itself is 1283 characters (SQL limit is 900).
There is no additional data, just wider columns. Why we are unable to create the index?
What is happening inside SQL Server? Does SQL make "room" in memory for the index for the entire width of the potential max row length?
I got an Assertion failed error while resizing a vector in a plug-in algorithm.
In order to isolate the problem I created a simple model class in Navigator.h file as shown below:
//========================= begin code =======================
class CStateStats
{
public:
DOUBLE m_dblSum;
DOUBLE m_dblSqrSum;
public:
CStateStats()
{
m_dblSum = 0.0;
m_dblSqrSum = 0.0;
}
};
class CAttStats : public DMHALLOC
{
public:
dmh_vector<CStateStats> vstatestats;
public:
CAttStats() : vstatestats (*this)
{
}
};
//========================= end code =======================
The access to DMHALLOC is provided in that class and in Navigator class as shown below:
//========================= begin code =======================
class ATL_NO_VTABLE NAVIGATOR :
public DMHALLOC,
public CComObjectRootEx<CComMultiThreadModel>,
public CComCoClass<NAVIGATOR, &CLSID_NAVIGATOR>,
public ISupportErrorInfo,
public IDMAlgorithmNavigation
{
public:
NAVIGATOR() : _viAttributeOutput(*this), _vCAttStats(*this)
//========================= end code =======================
I succeded making room for _vCAttStats vector, but when I tried providing room for the vectors of the vector I got an Assertion failed error (file dmhallocator.h Line:56 Expression assert(_dmhalloc._spidmmemoryallocator != NULL)). Please, see the code below, included in NAVIGATOR::GetNodeArrayProperty function:
//========================= begin code =======================
_vCAttStats.resize (2); // <<<<< succeeded here!
// make space for the states
_vCAttStats[0].vstatestats.resize(ulStates); // <<<<<<< assertion failed here!
//========================= end code =======================
I tried using a vector-of-vector approach and I also succeeded.
But I have to use that kind of structure: a vector of class with a vector inside.
I think I must provide a similar approach of vector-of-vector existing in DmhVector.h but I don't know how to do it.
I would apreciate any help.
I have a report that (for purposes of this example) displays States and the Cities in a state.
Now the State is the first group which I want to drill down into by expanding and then show the Cities as the detail line.
What I would expect to happen (and what does happen if I use the wizard instead of creating the report manually) is that I would click on a State and then the page would expand to make room for all the cities listed below.
(That is to say if I am showing only states, not expanded, then all 50 states fit on a single page. Then if I expand California all the states below that shift onto other pages to make room for the 400+ cities in California)
However, what happens is that when I preview the report instead of being 1 page long it is many pages in length with empty white space between the States (white space that would be occupied by the cities if I were to expand the state).
Can someone tell me what setting I need to adjust to get the report to dynamically resize when I expand/collapse groups?
Thank you.
Hi All
I'm getting this when executing the code below. Going from W2K/SQL2k SP4 to XP/SQL2k SP4 over a dial-up link.
If I take away the begin tran and commit it works, but of course, if one statement fails I want a rollback. I'm executing this from a Delphi app, but I get the same from Qry Analyser.
I've tried both with and without the Set XACT . . ., and also tried with Set Implicit_Transactions off.
set XACT_ABORT ON
Begin distributed Tran
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1 and DONE = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
COMMIT TRAN
It's got me stumped, so any ideas gratefully received.Thx
I have a design a SSIS Package for ETL Process. In my package i have to read the data from the tables and then insert into the another table of same structure.
for reading the data i have write the Dynamic TSQL based on some condition and based on that it is using 25 different function to populate the data into different 25 column. Tsql returning correct data and is working fine in Enterprise manager. But in my SSIS package it show me time out ERROR.
I have increase and decrease the time to catch the error but it is still there i have tried to set 0 for commandout Properties.
if i'm using the 0 for commandtime out then i'm getting the Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
and
Failed to open a fastload rowset for "[dbo].[P@@#$%$%%%]". Check that the object exists in the database.
Please help me it's very urgent.
I am getting this error :Distributed transaction completed. Either enlist this session in a new
transaction or the NULL transaction. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.OleDb.OleDbException: Distributed transaction completed. Either
enlist this session in a new transaction or the NULL transaction.have anybody idea?!
i have a sequence container in my my sequence container i have a script task for drop the existing tables. This seq. container connected to another seq. container. all these are in for each loop container when i run the package it's work fine for 1st looop but it gives me error for second execution.
Message is like this:
Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
Hi,
i am getting this error "Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.".
my transations have been done using LINKED SERVER. when i manually call the store procedure from Server 1 it works but when i call it through Service broker it dosen't work and gives me this error.
Thanks in advance.
I have Full database backup upto previous day and transaction logfile of Today transaction. my database has crashed. I have restored previous day's Full backup. I have faced difficulty to restore today's transaction from today's transaction log. What are the steps to restore full database back and one day's transaction log file. Note: there is no differential database backup and transaction backup.
View 8 Replies View Related
I want to list out the pending transaction for transaction replication by publication.
Help needed.
I'm receiving the below error when trying to implement Execute SQL Task.
"The ROLLBACK TRANSACTION request has no corresponding BEGIN TRANSACTION." This error also happens on COMMIT as well and there is a preceding Execute SQL Task with BEGIN TRANSACTION tranname WITH MARK 'tran'
I know I can change the transaction option property from "supported" to "required" however I want to mark the transaction. I was copying the way Import/Export Wizard does it however I'm unable to figure out why it works and why mine doesn't work.
Anyone know of the reason?
I created a Calculated measure in cube something like this : ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent].&[SPEND],[Measures].[Transaction Amount]). To get only spend transactions. Now, I want to slice this measure with same hierarchy to find the amount distribution across different transaction types under spend transaction. But this query behaving like the measure doesn't have relation with measure.
you can think this as below query:
WITH
MEMBER SPEND AS ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent].&[SPEND],[Measures].[Transaction Amount])
SELECT NON EMPTY {SPEND} ON 0
,NON EMPTY ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent]) ON 1
FROM [CUBE]
Hi
How do I make use of begin transaction and commit transaction in SSIS.
As am not able to commit changes due to certain update commands I want to explicitly write begin and commit statements. but when i make use of begin and commit in OLEDB commnad stage it throws an error as follows:
Hresult:0x80004005
descriptionyntax error or access violation.
its definately not an syntax error as i executed it in sql server. also when i use it in execute sql task out side the dataflow container it doesnt throw any error but still this task doesnt serve my purpose of saving/ commiting update chanages in the database.
Thanks,
Prashant
Error returned when trying to commit the transaction to a database that is a replication distributor. (sql2005 ctp16)
View 10 Replies View Related
Hi,
I am having some problem with SSIS transaction. Eventhought I tried to imitate the concept that Jamie presented at http://www.sqlservercentral.com/columnists/jthomson/transactionsinsqlserver2005integrationservices.asp
. My workflow is as followed
*********************************
For Each ADO.Record in Oracle (transaction=not supported)
If (Certain_Field_Value = 'A')
Lookup Data in SQL DB with values from Oracle (transaction=not supported)
DO Sequence A (Start a Transaction , transaction=required)
INSERT/UPDATE some records in SQLDB(transaction=supported)
Finish Sequence A ( transaction should stop here)
UPDATE Oracle DB ( Execute SQLTask, transaction=not supported)
If (Certain_Field_Value = 'B')
Lookup Data in SQL DB with values from Oracle (transaction=not supported)
DO Sequence B (Start a Transaction , transaction = required)
INSERT/UPDATE some records in SQLDB (transaction=supported)
Finish Sequence A ( transaction should stop here)
UPDATE Oracle DB ( Execute SQLTask, transaction=not supported)
If (Certain_Field_Value = 'C')
------------
------------
End ForEach Loop
*************************************
My requirements are that I want separate transaction for each Sequence A, B, C, etc... If Sequence A transaction fails, the other should still be continuing with another transaction.
But I am getting an error regarding the OLEDB Error in next Task (e.g in Certain_Field_Value = 'B') "Lookup Data in SQL DB with values from Oracle ", the error message is ".......Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction. ".
What is it that I am doing wrong?
Regards
KyawAM
I'm getting this error:
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a].
http://support.microsoft.com/kb/839279 this didn't help
any suggestions?
I am executing a stored procedure something like this
Create Procedure TEST
@test1
@test2
AS
BeGIN TRANSACTION ONE
SELECT...
UPDATE..
....
....
....
TRUNCATE
etc and lot of Select,update and delete statements like this
.....
COMMIT TRANSACTION ONE
The Block of code which I have b/w BEGIN TRANSACTION AND COMMIT TRANSACTION ..Will it be rolled back
if it encounters any errors in the SELECT,UPPDATE,DELETE ..statements which I have with the transaction one.
IF not How do I roll back if it encounters any erros b/w the BEGIN TRANSACTION and END TRANSACTION.
Thanks
micky
Hi all,
In my ASP application, I've been using this code:
----------------------------------------------
dim conn, connectionstring
connectionstring= "Provider=SQLOLEDB.1; Data Source = blahblah; Initial Catalog = abc; User Id = osss; Password=xxx"
set conn = server.CreateObject("adodb.connection")
conn.open connectionstring
----------------------------------------------
It's just basically to set up the connection to the SQL server, it works on my other pages, but on a few pages, the last line (conn.open connectionstring) triggers this error:
"Microsoft OLE DB Provider for SQL Server error '8004d00a'
New transaction cannot enlist in the specified transaction coordinator. "
I've never encountered this error before and I couldn't think of any solution... please help!!!
Thanks so much,
Annie
I had thought that if any statement failed within a BEING TRANS .. COMMIT TRANS block, then all the statements would be rolled back. But I am seeing different behavior (SQL Server 2000 8.00.2039)
For instance, run these statements to set up a test:
--DROP TABLE testTable1
--DROP TABLE testTable2
CREATE TABLE testTable1 (f1 varchar(1))
CREATE TABLE testTable2 (f1 varchar(1))
CREATE UNIQUE INDEX idx_tmptmp ON testTable1 (f1)
insert into testTable1(f1) values ('a')
So table testTable1 has a unique index on it..
Now try to run these statements:
--DELETE FROM testTable2
BEGIN TRANSACTION
insert into testTable1(f1) values ('a')
insert into testTable2(f1) values ('a')
COMMIT TRANSACTION
SELECT * FROM testTable2
..the first insert fails on the unique index.. but the second insert succeeds. Shouldn't the second insert roll back? How can I make two operations atomic?
Hi,On My local SQL server I have added a linked server to another SQLserver (remoteserver) in another Windows NT Domain.When I run this codeselect count(*) from remoteserver.mosaics.dbo.LocationThis works fine.However when I usebegin transactionselect count(*) from remoteserver.mosaics.dbo.LocationIt errors out saying thatThe operation could not be performed because the OLE DB provider'SQLOLEDB' was unable to begin a distributed transaction.New transaction cannot enlist in the specified transactioncoordinator. ]OLE DB error trace [OLE/DB Provider 'SQLOLEDB'ITransactionJoin::JoinTransaction returned 0x8004d00a].My question is even though I am just reading data from theremoteserver, why does the local transaction get promoted to adistributed transaction.Any help will be grately appreciated.TIA...Rohit
View 2 Replies View RelatedHi
I am trying transfer data from Back Office Server to Head Office using DTS. It is failing in few stores, rest of the store it is OK
Configuration
Head office :Windows 2003 SP1 and Sql Server 2000 SP3
Failing Store:Windows 2003 SP2 and SQL SERVER 2005
Successful Store :Windows 2003 SP2 qnd SQL SERVER 2000
At Store: Setting for MSDTC
Log on Account for MSDTC Service : Network Service
Network DTC Access = True
Allow Inbound = True
Allow Outbound = True
No Authentication Required = True
TurnOffRPCSecurity = 1
port Ranges for RPC = 5000- 5100
The error Message is as follows:
(Microsoft Data Transformation Services (DTS) Package (8004d00a): Connection 'Head Office SQL Server' for Task 'DTSTask_DTSDataPumpTask_1' does not support joining distributed transactions or failed when attempting to join. Unable to enlist in the transaction.
) (Microsoft OLE DB Provider for SQL Server (8004d00a): New transaction cannot enlist in the specified transaction coordinator. )
If any one can help me, that will be great!!! Thanks in advance
Shiny
With the function below, I receive this error:Error:Transaction count after EXECUTE indicates that a COMMIT or ROLLBACK TRANSACTION statement is missing. Previous count = 1, current count = 0.Function:Public Shared Function DeleteMesssages(ByVal UserID As String, ByVal MessageIDs As List(Of String)) As Boolean Dim bSuccess As Boolean Dim MyConnection As SqlConnection = GetConnection() Dim cmd As New SqlCommand("", MyConnection) Dim i As Integer Dim fBeginTransCalled As Boolean = False
'messagetype 1 =internal messages Try ' ' Start transaction ' MyConnection.Open() cmd.CommandText = "BEGIN TRANSACTION" cmd.ExecuteNonQuery() fBeginTransCalled = True Dim obj As Object For i = 0 To MessageIDs.Count - 1 bSuccess = False 'delete userid-message reference cmd.CommandText = "DELETE FROM tblUsersAndMessages WHERE MessageID=@MessageID AND UserID=@UserID" cmd.Parameters.Add(New SqlParameter("@UserID", UserID)) cmd.Parameters.Add(New SqlParameter("@MessageID", MessageIDs(i).ToString)) cmd.ExecuteNonQuery() 'then delete the message itself if no other user has a reference cmd.CommandText = "SELECT COUNT(*) FROM tblUsersAndMessages WHERE MessageID=@MessageID1" cmd.Parameters.Add(New SqlParameter("@MessageID1", MessageIDs(i).ToString)) obj = cmd.ExecuteScalar If ((Not (obj) Is Nothing) _ AndAlso ((TypeOf (obj) Is Integer) _ AndAlso (CType(obj, Integer) > 0))) Then 'more references exist so do not delete message Else 'this is the only reference to the message so delete it permanently cmd.CommandText = "DELETE FROM tblMessages WHERE MessageID=@MessageID2" cmd.Parameters.Add(New SqlParameter("@MessageID2", MessageIDs(i).ToString)) cmd.ExecuteNonQuery() End If Next i
' ' End transaction ' cmd.CommandText = "COMMIT TRANSACTION" cmd.ExecuteNonQuery() bSuccess = True fBeginTransCalled = False Catch ex As Exception 'LOG ERROR GlobalFunctions.ReportError("MessageDAL:DeleteMessages", ex.Message) Finally If fBeginTransCalled Then Try cmd = New SqlCommand("ROLLBACK TRANSACTION", MyConnection) cmd.ExecuteNonQuery() Catch e As System.Exception End Try End If MyConnection.Close() End Try Return bSuccess End Function
Hello, I've a problem with a software developed in C# with the framework 2.0. This is the error I receive : The operation could not be performed because OLE DB provider "SQLNCLI" for linked server "XXX_LINKED_SERVER" was unable to begin a distributed transaction. OLE DB provider "SQLNCLI" for linked server "XXX_LINKED_SERVER" returned message "No transaction is active.". If I try directly to restart the process, it works fine. Is there someone who can help me ? This is the process 1. In C# --> Call of a Query : select from the linked server (db in sql 2005) and insert into a table SQL 2005 2. In the C# --> using (TransactionScope scope = new TransactionScope()) and insert in a table in SQL 2005 which is link server Thank in advance.
View 1 Replies View Related