Restarted SQL Server 2005, And It's Working Great Now, But WHY??
Aug 3, 2007
My small business has about 21GIGs of data in our database. This entire week we've been running absolutely slow. Posting transactions have been taking up to 30+ seconds when they're normally instant.
We ran the profiler and found that certain stored procedures were taking an absolutely long time to run. We checked for fragmentation, indexing, etc. Keep in mind our hardware was constantly pegged at 80%+ all the time. We have about 60 users connected to our server at any given time.
After much effort to no avail, we finally resorted to just restarting the software. Some have even suggested powering down and rebooting our hardware, but I halted that. We stopped and restarted the server via the management studio and now everything is just peachy. We're funning super fast and smooth.
My concern is that we're just bandaid-ing the problem and not resolving it; so eventually we're going to be faced with this problem again. Even though restarting the server is quite easy and not too effective on our downtime, personally, I'd like to know what the real issue is. Isn't sql server 2005 a self-tuning software to begin with?
Has anyone experienced this and share some insights on what they did and didn't do to resolve this quirk?
View 3 Replies
ADVERTISEMENT
Nov 4, 2007
Hi EveryOne,
WIndows 2003 sp2 and sqlserver 2005 standard edition -sp2.
Found following erors in The cluster and event logs.
error: [sqsrvres] CheckQueryProcessorAlive: sqlexecdirect
failed
error: [sqsrvres] OnlineThread: QP is not online.
error: [sqsrvres] printODBCError: sqlstate = HYT00;
native error = 0; message = [Microsoft][ODBC SQL Server
Driver]Timeout expired
[sqsrvres] printODBCError: sqlstate = 08S01; native error = 0; message = [Microsoft][SQL Native Client]Communication link failure
[sqagtres] SvcStop: service did not stop; giving up.
[sqsrvres] OnlineThread: asked to terminate while waiting for QP.
SQL Server is terminating in response to a 'stop' request from Service Control Manager
Earlier we had sudden Sql agent restart but this time sql server services were restarted .
What could be he reasons for this.
This machine has 64 GB ram and sql server has been alloted 30 Gb.
I found 30 Gb Usage in the dump file of Sqlserver
Can a memory Starved sql server could be a rason why sql server would have restarted
Thanks,
Gautham.R
View 1 Replies
View Related
Mar 7, 2007
How can I connect database automatically when SQL server gets restarted while VC application execution. Any suggestions....
Regards
Sabitha
View 2 Replies
View Related
Jun 9, 2006
If you take a database offline to prevent users from accessing it, and then restart the server, will the database be back online when the server starts up?
If so, is there an option to prevent this from happening so that a database taken offline will remain offline until it is manually put online again by an administrator?
View 1 Replies
View Related
Feb 2, 2007
I am update/inserting records threw a web form in vb.net. I need to insert 'NULL' into my microsoft sql server database. I am not talking about the below line of code where website is the name of my paramater. If i do that it will just place a blank into that field in the database. If i dont enter anything into that textbox I want it to to say NULL in that field. So if I go into the actual table in the SQL Server Management Studio and look at the website field of the recored I just added or updated and did not type anything into the web site textbox it needs to say NULL. I also tried the second line of code but that places a single quote in front and behind NULL. So the field will have the value 'NULL'.
website.value = txtwebsite.text.tostirng
if txtwebsite.text ="" then
website.value ="NULL"
end if
The reason why I need the NULL there is because I bind the website filed to a hyperlink template in a gridview. The actual text of the hyperlink is bound to PAYER which is a name of a insurance payer but the navigateto is bound to the website field. If i do not enter any data into the website field and it stays as NULL, then when my gridview is loaded, payers that dont have a website will not be underlined and user wont have the option to click on them since there is no value for the navigateto. But if i use my form to update/add a payer and leave the website textbox blank in puts a blank into that field in my database and when it loads that new row into the gridview the PAYER is underlined and u can click on it but it will just take u to the web site is unavailable page. So is there anyway to actaull have NULL placed into a filed and not just blank space
View 3 Replies
View Related
Mar 3, 2006
hi
I had a view in which I did something like this
isnull(fld,val) as 'alias'
when I assign a value to this in the client (vb 6.0) it works ok in sql2000 but fails in 2005.
When I change the query to fld as 'alias' then it works ok in sql 2005 .
why ?? I still have sql 2000 (8.0) compatability.
Also some queries which are pretty badly written run on sql 2000 but dont run at all in sql 2005 ???
any clues or answers ?? it is some configuration issue ?
Thanks in advance.
View 5 Replies
View Related
Aug 23, 2007
I wrote some views in sql2000 and all was well. I upgraded to sql 2005 and non of the order by clauses work when I run the views directly. If I open the view up in desing mode and run them, they work.
Any Ideas?
Thanks,
Rick
View 9 Replies
View Related
Nov 20, 2007
I'm trying to add records to a table that includes datetime value using INSERT query.
No matter what date value I'm giving the query, the value saved is 1/1/1900 00:00 .
Also, I'm interested in saving only the short date, without time. I thought changing the type from datetime to smalldatetime would do the job, but it didn't help.
View 7 Replies
View Related
Feb 10, 2008
Hi
I have a VB project in VS 2005 Express that uses SQL 2005. I use Click Once to deploy the project. The s/w installs and installs the SQL 2005 prerequisit on XP and Vista machines without problem.
Problem: As soon as the apps tries to use SQL 2005 on a Vista machine it says sqlservr.exe has stopped working and has to close. XP machines work like a dream.
Any ideas please? Any help would be welcomed.
Dim sql As String = "CREATE DATABASE " + dataBaseName + " ON (NAME = " + dataBaseName + ", FILENAME = '" _
+ UKHRdataFolder + "" + dataBaseName + ".mdf')"
Dim myCommand As New SqlCommand
Dim myAdapter As New SqlDataAdapter
Dim myData As New System.Data.DataTable
Dim conn As New SqlConnection
conn.ConnectionString = _
"Data Source=.SQLEXPRESS;AttachDbFilename=;Integrated Security=True;Connect Timeout=30;User Instance=True"
myCommand.Connection = conn
Try
conn.Open()
Try
myCommand.Connection = conn
myCommand.CommandText = sql
myCommand.ExecuteNonQuery()
Catch myerror As SqlException
End Try
Catch myerror As SqlException
Finally
If conn.State <> ConnectionState.Closed Then conn.Close()
End Try
conn.Close()
conn.Dispose()
View 13 Replies
View Related
Apr 19, 2006
Hi,
I've been trying to get my merge replication to work with a sql ce 2.0 on
sql server 2005, but it keeps generating shapshot scripts my pocket pc can't
execute.
Example of my table.sch file in my snapshot folder:
drop Table [dbo].[Application]
go
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[Application](
[AppID] [nvarchar](20) NOT NULL,
[AddOnInfo] [nvarchar](50) NULL,
[MaxClients] [int] NULL,
[AppName] [nvarchar](255) NULL,
[NbrDaysHistory] [int] NOT NULL CONSTRAINT [DF_Application_NbrDaysHistory]
DEFAULT (10),
[NbrDaysFuture] [int] NOT NULL CONSTRAINT [DF_Application_NbrDaysFuture]
DEFAULT (10),
[rowguid] [uniqueidentifier] ROWGUIDCOL NOT NULL CONSTRAINT
[DF__Applicati__rowgu__4C364F0E] DEFAULT (newid())
)
GO
SET ANSI_NULLS ON
go
SET QUOTED_IDENTIFIER ON
go
ALTER TABLE [dbo].[Application] ADD CONSTRAINT [Application_PK] PRIMARY KEY
CLUSTERED
(
[AppID]
)
GO
I've selected that I was setting up a merge replication that needs to be
compatible with sql ce. But it doesn't seem to do this...
I've tried to set the compatibility level to 80SP3 manually but it remains
80RTM...
I've tried everything.....
Does anyone have any ideas what could be causing this?
If I remove these lines from the sch file everything works jsut fine:
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_NULLS ON
go
SET QUOTED_IDENTIFIER ON
go
ALTER TABLE [dbo].[Application] ADD CONSTRAINT [Application_PK] PRIMARY KEY
CLUSTERED
(
[AppID]
)
GO
Even if I make a publication for sql mobile 2005 it generates the same
script.... It's almost as if SQL 2005 is ignoring my settings...
Thanks,
Desperate Natasja
View 12 Replies
View Related
Oct 20, 2014
Is there a way to determine when the SSAS Service last restarted? preferably a [mdx] query like you can do with the DB engine using a T-SQL query but any method that does not going to the servers OS and checking would be fine.
View 1 Replies
View Related
Feb 25, 2008
Hi all just as the subject suggests I am getting the follwing problem not sure why as I have used the same method on a bunch of other servers but they were all on the same DOMAIN whereas this one isn't.
"Login failed for user ''. The user is not associated with a trusted SQL Server connection."
Using the following code:
Code Snippet
Str_connectionString = "server=OB-DEV6; database=WEBSERVER; Trusted_Connection=True"
sqlCon = New SqlConnection(Str_connectionString)
But it doesn'y seem to like that at all. I have gone into:
SQL Management Studio > Properties > Security > SQL Server and Windows Authentication
Restarted the SQLServerAgent (MSSQLServer)Restarted the SQL Server (MSSQLServer)
But still I get the same security error.
Cheers for the responses, Onam
View 1 Replies
View Related
Jan 28, 2008
I have this simple full text search query that works perfectly on my own computer using sql server 2005 express, however, on the production server(shared hosting)when I added the first 50+ rows, the full text search works perfect, but as the number of rows increases, the full text search can only see the first50+ rows, but not the new ones. Is there any quick solution for this or it's just a common mistake for developers for not properly indexed columns?Is there a way to re-indexed all rows without loosing data on the live server? search query: SELECT TOP 50 *FROM li_BookmarksWHERE FREETEXT(Keywords,@Keywords)
View 2 Replies
View Related
Nov 20, 2006
Hi all,I just asked some people to help me out and phone microsoft with thefollowing information, kindly they refused unless we setup a supportcontract with them first, for pre-sales information. (That really doesnot sound like good business sense to me - anyway here is our problem,if anyone could help thanks)."To tell and ask microsoft:We will be setting up a microsoft sql server 2000 instance running on awindows 2003 server.1) We need to check this can run alongside a microsoft 2003 sql server(either workgroup or standard edition), on the same machine. Are thereany .dll clashes if we do this? If there are can we run SQL Server2000, in a virtual machine running windows 2000 professional. (I have alicenced copy we can use for this).2) If we run one instance of 2000, and one of 2003 of the sql servers,can one use the processor licence model, and one use the CAL licencemodel."Thanks for any help, and any idea why they actually force you to usenews groups for pre-sales information?David
View 4 Replies
View Related
Apr 30, 2007
Hi all,
I can't get SQL Server 2005 Enterprise Edition working on my notebook with Windows Vista Business Edition. I installed SQL Server 2005 Enterprise Edition and then i ran SP2 for SQL Server EE.
But now when i a am trying to connect to any server from SQL SERVER MANAGEMENT STUDIO i can't see any Server in Server Name list. When I click on Browse for more, I don't see any server. I am able to get Network servers.
While installing the SQL SERVER all the features were disabled as it is, then i went to advanced and selected all the options.
Any suggestions are apperiacted in advance.
Regards,
Syed Abbas Naqvi
Sr. Software Developer.
View 6 Replies
View Related
May 24, 2006
We tested this new feature ("Keep Alive" for orphant connections to automatically close) with no success - neither the standard properties nor slightly changed properties worked.
We tested like this:
SQL Server 2005 - ADO.NET Client
The client established an explicit lock on one row at one database. Afterwards we disconnected the client by pulling out the network-cable. We waited about 35 sec for the sessios to close - but nothing happend; we waited another minute but nothing changed. SQL Server Management Studio and the command line "netstat" told us that the connections are alive ... so what went wrong?
Did we miss something?
Our goal is, that such "orphant connections" get cleaned up and also their inked locks on the database.
BTW we installed the sp1 before all the tests started!
please help -
.agony
View 6 Replies
View Related
Nov 28, 2007
Hello ,
I get this error (connection closed) in web applications, whenever SQL Server database Service is restarted. When I run the application again, the error disappears. Granted that there are lots of users and Database gets restarted every night is not helping.
Is there any setting in the JDBC driver properties, where I can tell it to open a closed connection (like a retry count), rather than fail the first time and work the second time.
We use
1. SQL SERVER 2005 SP2,
2. Websphere Protal Server 5.1
3. SQL SERVER 2005 JDBC driver 1.1(com.microsoft.sqlserver.jdbc.SQLServerConnectionPoolDataSource.)
I am wondering if connection pool driver is causing this problem. I do not care about connection pooling, but Websphere doen not seem to like any other JDBC Driver. I don't mind switching to another driver as the last option.
Error is :
[11/27/07 17:01:59:331 MST] 7202440d WSRdbManagedC W DSRA0080E: An exception was received by the Data Store Adapter. See original exception message: com.microsoft.sqlserver.jdbc.SQLServerException: The connection is closed.
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.checkClosed(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.getCatalog(Unknown Source)
at com.ibm.ws.rsadapter.spi.WSRdbManagedConnectionImpl.getCatalog(WSRdbManagedConnectionImpl.java:676)
at com.ibm.ws.rsadapter.spi.WSRdbManagedConnectionImpl.introspectSelf(WSRdbManagedConnectionImpl.java:808)
at com.ibm.ws.rsadapter.FFDCLogger.introspect(FFDCLogger.java:169)
at com.ibm.ws.rsadapter.jdbc.WSJdbcConnection.introspectSelf(WSJdbcConnection.java:1253)
at com.ibm.ws.ffdc.IntrospectionLevelMember.getNextMembers(IntrospectionLevelMember.java(Compiled Code))
at com.ibm.ws.ffdc.IntrospectionLevel.getNextLevel(IntrospectionLevel.java:181)
at com.ibm.ws.ffdc.ObjectIntrospectorImpl.dumpContents(ObjectIntrospectorImpl.java:67)
at com.ibm.ws.ffdc.ObjectIntrospectorImpl.dumpContents(ObjectIntrospectorImpl.java:51)
at com.ibm.ws.ffdc.IncidentStreamImpl.introspectAndWrite(IncidentStreamImpl.java:396)
at com.ibm.ws.ffdc.IncidentStreamImpl.introspectAndWriteLine(IncidentStreamImpl.java:632)
at com.ibm.ws.ffdc.DiagnosticEngine.dumpObjectAndStack(DiagnosticEngine.java:301)
at com.ibm.ws.ffdc.DiagnosticEngine.processIncident(DiagnosticEngine.java:147)
at com.ibm.ws.ffdc.FFDCFilter.filterEngine(FFDCFilter.java:428)
.......lots of lines
Regards
Bobba
View 3 Replies
View Related
Sep 18, 2006
I'm not experienced with SQL Server 2005.I've got a live copy of my database running on the web server.I've got another copy running on my desktop that I make changes to.Whats the best way to sync between the two so:1. I don't have to take the application offline2. I don't loose any data from the live database3. But I can implement changes to tables and/or add new tables
View 1 Replies
View Related
Aug 1, 2006
hello friends,
i am facing a problem in SQL Server 2005 Express Edition. The database created in the SQL Server 2005 Express is when opened in SQL Server 2000, it changes the data type of all the columns of all the table to text type. can anybody help me?
View 4 Replies
View Related
Apr 28, 2008
I am developing an asp.net app using visual web developer. I am using a sql server 2005 db for the back end. I have learned that I have to restart my machine if I want to work with the db in SQL Server 2005 Express after working with it in Visual Web Developer.
I am wondering why this is. I am assuming that the db is locked when it is used with VWD. Is this correct? Am I refering to it's status of "locked" correctly? Should I call this something else?
-thanks to anyone that can help
View 3 Replies
View Related
Apr 17, 2007
I have a problem with DTS - ActiveXScripting that it cannot initialize the script engine, I have the backward compatibility stuff installed, even tried a repair but still does not work.
Many thanks for any help you can provide on this problem.
Paul
Error Information below:
Date 17/04/2007 13:07:32
Log Job History (Test ActiveX Script)
Step ID 1
Server GBCONV1A002V03
Job Name Test ActiveX Script
Step Name Step 1: Exec TestActiveX script
Duration 00:00:01
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: WW004ConSrvSQLAgentA002. ...TSStep_DTSActiveScriptTask_1 DTSRun OnError: DTSStep_DTSActiveScriptTask_1, Error = -2147220487 (800403F9) Error string: ActiveX Scripting was not able to initialize the script execution engine. Error source: Microsoft Data Transformation Services (DTS) Package Help file: sqldts80.hlp Help context: 4500 Error Detail Records: Error: -2147220487 (800403F9); Provider Error: 0 (0) Error string: ActiveX Scripting was not able to initialize the script execution engine. Error source: Microsoft Data Transformation Services (DTS) Package Help file: sqldts80.hlp Help context: 4500 DTSRun OnFinish: DTSStep_DTSActiveScriptTask_1 Error: -2147220440 (80040428); Provider Error: 0 (0) Error string: Package failed because Step 'DTSStep_DTSActiveScriptTask_1' failed. Error source: Microsoft Data Transformation Services (DTS) Package Help file: ... Process Exit Code 1. The step failed.
View 3 Replies
View Related
May 1, 2008
Hi all,
i m using VS 2005 and I have to display records with feature of INSERT / DELETE ITEMS But when i connect to Sql Server Database and select * from columns but here when clicking the "Advance" button , i do not get "Advance Sql generation Option " highlighted. Instead , it is turned off. i.e
The Following options are not highlighting
------ Generate Insert, Update, Delete statements
------ use optimistic concurrency
Plz guide me anyone..... is anything wrong with our VS 2005 software installed?
Bilal
View 4 Replies
View Related
Apr 13, 2007
I installed SQL Server 2005 Enterprise, then SP1 and then SP2, Maintenance Plan worked. But if I installed SQL Server 2005 Enterprise and then SP2 directly (skipping SP1), the Check Database Integrity in Maintenance Plan was not working. The error message is as follows:
Executed as user: DomainSqlServiceAccount. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:56:21 AM Could not load package "Maintenance PlansTest Plan" because of error 0xC0014062. Description: The LoadFromSQLServer method has encountered OLE DB error code 0x80004005 (Login failed for user ''. The user is not associated with a trusted SQL Server connection.). The SQL statement that was issued has failed. Source: Started: 10:56:21 AM Finished: 10:56:21 AM Elapsed: 0.047 seconds. The package could not be loaded. The step failed.
Other tasks like Rebuild Index seem to be fine. SP2 is supposed to be inclusive. Does anyone have any ideas on why this is happening.
Thanks
E.G.
View 10 Replies
View Related
Jan 4, 2005
hi, im currently on sql hell right now. im having a hard time learning this sql thingie....
...the thing is this: im currently using the book ASP.NET Unleashed and most of the examples there are on SQL. what i was trying to do before was convert everything to OleDb to fit the ms access which i have right now.
unfortunately, some of the codes seem not to work properly. maybe its because of im using OleDb...
so what i did was i downloaded the MSDE sp3 package and installed it on my PC. now that i have an sql server for my WebMatrix, i just dont know what to do next? i mean, where do i put the sql sample databases like northwind and pubs???
im really confused about this sql thing. i really hate it.
help!!!
View 1 Replies
View Related
Mar 17, 2004
Does anyone know of any links to some great MS SQL sites I can check out to learn from?
Thanks for your thoughts.
Sincerely,
Tim
View 4 Replies
View Related
Feb 10, 2014
Im not getting data when I execute the below 0 Rows:
select mydate from [dbo].mytable
where convert(varchar, mydate,101) between '11/18/2013' and '02/08/2014'
However the below gives results...
select mydate from [dbo].mytable
where convert(varchar, mydate,101) between '01/01/2013' and '02/08/2014'
View 5 Replies
View Related
Jan 30, 2007
I have two servers both with different collation. Server A being SQL_Latin1_General_CP1_CI_AS and the live server and Server B being Latin1_General_CI_AS and a dev server. Now i have a load of data on the dev which i'm query to see if its on the live server.
select * from ServerA.Table1 where Col1 in
(select Col1 from ServerB.Table1)
I get this Error message.
Cannot resolve the collation conflict between "Latin1_General_CI_AS" and "SQL_Latin1_General_CP1_CI_AS" in the equal to operation.
View 2 Replies
View Related
Nov 28, 2007
I am SQL server DBA for 4 years. ALways i am getting help from TARA and other SQL gurus. Salute to all
View 1 Replies
View Related
Aug 20, 2007
Hope someone can solve my problem
I have a working version of the above installed on a win 2000 machine with SQL ver (MSDE2000A.exe)
I purchase a laptop with vista home premium installed on it
MSDE2000A.exe would not install hence I installed SQL Server Express I managed to install the server and connect but when trying to login through Great Plains it says that I need SQL version 7. I have done a little research and found that SQL 7 is not supported by Vista.
Which way do I go now ?????
Do I install a copy of xp, update Great Plains or wait for an updated version of SQL Server Express SP ???
Please can anyone help !!!
and please dont get too technical Im not an expert
Many Thanks
Mr Magoo
View 2 Replies
View Related
May 31, 2006
Greetings,
We currently use GP 8.00 with the SQL Server 8.0.
We are trying to develop a view based on manfacturing orders - when a finished good is placed on hold and then calculating the componet parts that are on hold.
The calculation runs fine, we multiply end quanity x componet quanity found on the BOM. But we are not getting the correct componet item numbers to display.
Here is the syntax we are using:
SELECT DISTINCT
TOP 100 dbo.BM010115.QUANTITY_I, dbo.WO010032.ENDQTY_I, dbo.WO010032.ENDQTY_I * dbo.BM010115.QUANTITY_I AS QTY_REQHOLDMO,
dbo.BM010115.CPN_I, dbo.WO010032.MANUFACTUREORDER_I, dbo.WO010032.ITEMNMBR, dbo.WO010032.MANUFACTUREORDERST_I
FROM dbo.TEC_MOSumm RIGHT OUTER JOIN
dbo.WO010032 ON dbo.TEC_MOSumm.ITEMNMBR = dbo.WO010032.ITEMNMBR RIGHT OUTER JOIN
dbo.BM010115 ON dbo.WO010032.BOMCAT_I = dbo.BM010115.BOMCAT_I
WHERE (dbo.WO010032.MANUFACTUREORDERST_I = 4)
We have tried several different types of joins but still no luck. The upshot is we need to know that when a finished good is placed on hold, - how many of its componet parts are placed on hold.
Any assistance you can provide will be appreciated.
Sam
View 1 Replies
View Related
Feb 27, 2008
Here is my problem.
I am setting up a new server with Great Plains v8.0 (I have migrated all the databases from the other server, which has a working version of Great Plains v8.0 at the present moment). We are planning on getting rid of that server as it causing a lot of problems at the moment. I start the install of Great Plains v8.0 on the new server, install the components. After Great Plains v8.0 installs I go into Great Plains Utilities, and get the following message (I have installed SQL Server 2005 on the new server, and SQL Server 2000 is being used on the old server).
After I run Great Plains Utilities, I get the following error message -
"The stored procedure verifyServerVersion() of form duSQLinstall: 111
Pass Through SQL returned the following results: DBMS: 0, Great Plains: 0."
and when I click OK, it gives me another notification message -
"Your current SQL SERVER is not a support version
Req: Microsoft SQL Server 7.0
Act: Microsoft Server 2005
You need to upgrade to SQL Server 7.0 before continuing".
Why am I get that error message when I have SQL Server 2005 installed?
Can someone point me in the right direction.
Thanks
View 4 Replies
View Related
Nov 24, 2006
can anybody give me some nice links with a detailed explaination of the various replication errors and solution
thanks in advance
Jacx
View 1 Replies
View Related
Mar 30, 2007
We've been working hard with our teams here to get better/more/good information out to our users. We€™ve created a new a customized Windows Live search, that limits results to Books Online. Check this out, and make sure you let your contacts know to visit it and provide feedback:
http://search.live.com/macros/sql_server_user_education/booksonline
We want to generate as much traffic as possible here so that we can see if this is useful to our users. We€™d love to hear back from everyone we can!
View 8 Replies
View Related
