Dear all I need your help in order to restore a database.
I did a backup of one SQL database hosted on my web service, and after I copy the file on my C:Wutemp disk.
I'd like to import this database on my MSSQL installed on my local pc in order to have the same web site in local.
I try to restore it with enterprise manager (..using Restore) but I receive a lot of error message:
(I translate from Italian so..be patient..)
The filename 'C:Program FilesMicrosoft SQL ServerMSSQLDatamioDB_DATA.mdf' could be not correct.
Impossible to restore the file 'miodb_Data' in 'C:Program FilesMicorosft SQL ServerMSSQLDatamioDB_DATA.mdf'. Use WITH MOVE in oreder to identify a valid location for the file
The filename 'C:Program FilesMicrosoft SQL ServerMSSQLDatamioDB_Log.LDF'could be not correct
Impossible to restore the file 'miodb_Log' in 'C:Program FilesMicorosft SQL ServerMSSQLDatamioDB_Log.ldf'.
I need an application with asp.net that let me restore database by getting .bak file and database name and database user and user password, my database is SQL Server 2005.
Hi. I've following problem: - Customer played with his logical drives in a CPQ smart array - He played too much: he lost the drive with the LDF-File - Now the SQL-Server is in a kind of wired mode; you can start and stop it, but you cannot connect to (neiter 'sa' nor any other user available before) In fact the mode is not wired: what shall he do other when most important file is missing... :o - The problem for me now is:
> How can I get the Enterprise Manager or Query Analyzer up and running again to start a restore?
PS: The restore is to be done from a tape-library running Veritas Backup Exec + SQL-Agent
PPS: Error-log says (what I already know): 2005-10-04 17:18:02.69 spid11 Device activation error. The physical file name 'H:DEVLOG1DEVLOG1.ldf' may be incorrect.
i need a sql statment or procedure to kill all user connection to one database. And Deny new connection for a little time. So i can a restore this database from a dump.
I can this do only in exclusiv modus. without any other connection.
How many result-rows does mssql return should be used asynchronous method to use mssql cursor, can get the best performance in any time in any result offset?
i want to make the cursor fast in any time whatever how many results returned
i was planning to create a database migration tool .. its a certain database of a DMS (document management system) to another DMS (two different DMS)... from DMS using msde 2000 server .. and tranfer to a DMS using a postgre sql or mssql .. depends ..
they have different table structures and names . . :D
i was thing of what language shall i use.. or what language is the best to work on this kind of project :)
Does enabling/disabling Data Execution Prevention have a performanceimpact on SQL 2000 or SQL 2005?For SQL best performance - how should I configure for:Processor Scheduling:Programs or Background servicesMemory Usage:Programs or System Cache
I am a bit new to the MSSQL server. In our application, we use so many SQL queries. To imporve the performance, we used the Database enigine Tuning tool to create the indexes. The older version of the application supports MSSQL 2000 also. To re-create these new indexes, I have an issue in running these "CREATE INDEX" commands as the statements generated for index creation are done in MSSQL 2005. The statements include "INCLUDES" keyword which is supported in MSSQL 2005 but not in MSSQL 2000.
Ex:-
CREATE INDEX IND_001_PPM_PA ON PPM_PROCESS_ACTIVITY
I am currently work on mssql 6.5. On my workstation, I have mssql 6.5 cient software.
However, I would like to install mssql 7.0 server on my nt workstation and work with it to become familiar with 7.0. Can I install mssql 7.0 server on my nt workstation? Can mssql 6.5 client coexist with mssql 7.0 on the same machine if they are in different directories?
Ben writes "I have a sql script that doesn't function very well when it's executed on a SQL 2000 server.
The scrpt looks like this:
--------------------------------------------------------------------------------------------------- USE [master] GO IF NOT EXISTS (SELECT * FROM master.dbo.syslogins WHERE loginname = N'SSDBUSERNAME') EXEC sp_addlogin N'SSDBUSERNAME', N'SSDBPASSWORD' GO GRANT ADMINISTER BULK OPERATIONS TO [SSDBUSERNAME] GO GRANT AUTHENTICATE SERVER TO [SSDBUSERNAME] GO GRANT CONNECT SQL TO [SSDBUSERNAME] GO GRANT CONTROL SERVER TO [SSDBUSERNAME] GO GRANT CREATE ANY DATABASE TO [SSDBUSERNAME] GO USE [master] GO If EXISTS (Select * FROM master.dbo.syslogins WHERE loginname = N'SSDBUSERNAME') ALTER LOGIN [SSDBUSERNAME] WITH PASSWORD=N'SSDBPASSWORD' GO GRANT ADMINISTER BULK OPERATIONS TO [SSDBUSERNAME] GO GRANT AUTHENTICATE SERVER TO [SSDBUSERNAME] GO GRANT CONNECT SQL TO [SSDBUSERNAME] GO GRANT CONTROL SERVER TO [SSDBUSERNAME] GO GRANT CREATE ANY DATABASE TO [SSDBUSERNAME] GO USE [master] GO IF EXISTS (select * from dbo.sysdatabases where name = 'ISIZ') DROP DATABASE [ISIZ] GO USE [SurveyData] GO exec sp_adduser 'SSDBUSERNAME' GRANT INSERT, UPDATE, SELECT, DELETE TO SSDBUSERNAME GO USE [SurveyManagement] GO exec sp_adduser 'SSDBUSERNAME' GRANT INSERT, UPDATE, SELECT, DELETE TO SSDBUSERNAME ---------------------------------------------------------------
I need to be converted to a script that can be executed on both MSSQL 2000 and MSSQL 2005.
I was wondering if somebody there could help me with this problem?!
I've been tasked to move our production databases on MSSQL 2000 to 2005. I've supported MSSQL since version 6.5 and performed migrations to successor versions.
Current Environment is MSSQL 2000 32-bit with current Service Packs.
I've performed mock migrations on Test servers upgrading all Production instances simultaneously from MSSQL 2000 to 2005 32-bit. The Test environment is identical to Production minus server name, IP etc. Also I have a separate server with MSSQL 2005 installed where I use the DETACH / ATTACH and BACKUP / RESTORE method for migration / acceptance testing. There are approximately 30 databases totaling 70 GB. This has gone as expected and fairly successful. Vendors have been coordinated with to update code and staff for acceptance testing.
I'd prefer going directly to MSSQL 2005 64-bit instead if possible due to memory benefits etc. This is where I'd like some feedback prior to borrowing a 64-bit server for testing.
Upgrade options:
1. Is it better to migrate from MSSQL 2000 32-bit to 2005 64-bit via: a. DETACH / ATTACH b. BACKUP / RESTORE c. Is one method more advantageous relating to the end result? 2. Regarding XP clients, have issues been experienced with the default SQL Server driver or is an alternate recommended for XP clients to connect to a MSSQL 64-bit server databases? 3. If you have performed this migration and have relevant experience please pass them along.
While migrating Report services in SQL Server 2005 to 2014, I am trying to restore the Encryption Key in RS Configuration Manager in2014. But I cannot click the 'Restore' button in RS Configuration Manager. So if I should be grant more right to do so or any other action?
In Windows Server 2012. How do I do a System Restore to a previous restore point?I need to install the 64 bit and 32 bit Oracle Client Install for connections in SSIS and to create Oracle Linked Servers.
If you make a mistake it is not fun removing it. Sometimes it corrupts the machine and it is difficult to uninstall since there is not an Oracle Universal installer for Oracle 11g.If you install the 32 bit before the 64 you mess up the machine.how to create a restore point.
DB is developed on local computer with MSSQL 2005 Express. My host is on MSSQL 2005 workgroup. Are they compatible, because I am getting errors? Is my approach wrong?
I have tried several approaches.
A) I created a backup of database on my local, then placed a copy on the server. Then I tried to restore through Server Management Studio. I get this error.
TITLE: Microsoft SQL Server Management Studio
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
ADDITIONAL INFORMATION:
The backed-up database has on-disk structure version 611. The server supports version 539 and cannot restore or upgrade this database.
RESTORE FILELIST is terminating abnormally. (Microsoft SQL Server, Error: 3169)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=08.00.2039&EvtSrc=MSSQLServer&EvtID=3169&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
B: I also have tried copying the database. I put it in the same path as the other databases that can be read with server management studio on the server. Then, tried to get to it through server managements studio and it did not appear. So I tried to attach it. Then I received this error:
TITLE: Microsoft SQL Server Management Studio
------------------------------
Attach database failed for Server 'MROACH1'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach+database+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
Could not find row in sysindexes for database ID 10, object ID 1, index ID 1. Run DBCC CHECKTABLE on sysindexes.
Could not open new database 'LodgingDB'. CREATE DATABASE is aborted. (Microsoft SQL Server, Error: 602)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=602&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
C: I have also tried opening the Database, and back up file through Server Management Studio. without success.
D: I also tried Windows and Software update at microsoft update, but no updates were recommended for Version on Server.
I'm surprised this is so hard. My original data base was created in same family of software. 2005 MS SQL Express. I could use some direct help from someone experienced with this. Am I doing it wrong or are the DB versions incompatible.
I am looking for a SQL Backup/Restore tools which can restore multiple environments. Here is high level requirements.
1. We have 4 DBs, range from 1 TB - 1.5 TB Each Database. When we restore to QA, DEV, or Staging, we usually restore 4 of them. 2. I am looking for the speed to complete restoring between 1 - 2 hours for 4 DBs.
I am evaluating the Dephix Software but the setup is very complex and its given us a lot of issues with Windows Authentions, and failure in the middle of the backup. I used Guess Software many years ago but can't find it on the web site any more. Speed is very important for us mean complete restoring as fast as possible. We are on SQL 2012 and SQL 2008 R2.We are currently using NETAPP Technology and I have Redgate Backup Tool but I am mainly looking for fast Restore Process.
Would some one please help me with the syntex on how to run "restore filelistonly" or restore verifyonly" on a SQL backup which has multiple filesets?? My backups locations are as follow: RESTORE VERIFYONLY From disk = 'E:syndicated_databank__bkup_01.bak', 'E:syndicated_databank__bkup_02.bak', €˜E:syndicated_databank__bkup_03.bak€™, €˜E:syndicated_databank__bkup_04.bak€™, €˜E:syndicated_databank__bkup_05.bak€™
I tried to do a restore with the above, I got error The label 'E' has already been declared. Label names must be unique within a query batch or stored procedure.
I have seen this before. A 2000 restore fails, leaving the database thinking it is being restored but the restore job failed and errors when it is restarted. EM is clueless. I believe there is a proc to reset some flag. Can you share it with me???
I need to restore test DB from production backup but once it is restored I would need all the permissions of sql logins and windows AD account intact in test Db as it was before.
Trying to keep out sysadmins & sa during/between database RESTORE
Configuration: WINNT Server Enterprise 4.0 w/SP5 SQL Server 7 Enterprise & SP1
2 SQL Servers: Production Server Standby server
I Backup (full backup) databases to disk on primary server (logical backup devices are physicaly located on a Standby server (dedicated gigabit NIC in each server for this process). Transaction logs are applied to the Standby server throughout the day.
Problem: How to keep out "sa" and sysadmins from a database while I'm restoring (or between restores) to a standby server? The database being restored cannot be in use during a restore. If a DBA forgets that this process is happening, the statement fails (RESTORE)for the database they happen to be in at the time of the restore.
Example restore statement: Standby Server - RESTORE DATABASE databasename FROM database_dd WITH DBO_ONLY, REPLACE, STANDBY = 'g:Mssql7FromPrimaryDatabaseName_undo.ldf'
I could restrict Domain sysadmin access and change sa password. I could also put the database in "Single user" mode, however this could become problem if my process disconnects and then someone else connects - then my process is locked out. What I'm really looking for is to lock out all activity for a database that is in "standby mode" except for RESTORE processes.
Hey guys, im trying to write an application to connect to a database on a mssql server using asp.net. Thus far any code i've seen and tried seems to not recognize the ODBC connections, so i was hoping you guys can offer some suggestions. For the example lets say the server is mssql9.aaa.com the db name is xyz with a username of welsh_welsh and the password is q with a table named abc in the database. How exactly would you go about connecting. The code i've tried so far is below: <% "Data Source = mssql9.aaa.com;Initial Catalog = xyz;UserID = welsh_welsh;Password = q;" %> The error i get from the sever is Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately. Compiler Error Message: BC30035: Syntax error.
Im trying to write a very basic stored porcedure that looks up some data and performs simple calculations, the results of which are then saved (updated) to a specific table. To be more specific, I use the avg function in a simple select statement to average some figures based on a where clause: SELECT AVG(exactskip)FROM HistoryWHERE Exact = '023' ...This should return 425.66, but it returns either 425 or 425.0000. The results which are returned and being saved are being shown as a rounded integer or shown with 4 zeros after the decimal. I know it should be ending with a decimal in almost all cases. The column in the table that the result are being saved to is formated as smallmoney. The column in the table whos data is being averaged is set as an integer. Question, how can I make the avg function calculate the decimal values and save the appropriate decimal results. What changes do I need to make to my select statement. Any help would be appreciated. I am still very new to all this, so please be specific and somewhat step by step in any reply Thanks Scott
I have an SQL 2000 server set up that runs perfectly, and an IIS set up that runs perfectly but I can not get the webpage to read data from the dbase. Is there a connection that I have to make or a program I have to load? The page is a .asp page, and when I run the page that should connectI do not get any errors in the dbase at all, so I can only imagine that it is not even seeing an attemptat a connection. Any help is appreciated.
Hi, is there an easy way to open a SQL 7 db using DAO code. Seems like a simple
set db = currentdb
won't do the trick. I also tried to open a workspace first, but I keep getting error when I try to do something with the recordsets, and I can't RunSQL. Any suggestions?
