Hello !
I am just few months started to learn SQL server.
I just attempt to restore a database which I have backuped last week.
The following error appears each time when I was trying Restore it from Hard Disk.
Error :
RESTORE DATABASE must be used in single user mode. when trying restore the master database. RESTORE DATABASE is terminating abnormally.
Please help me to restore my database.
We are taking database backup using SQL backup option and trying to restore the database on another server giving the following error
Microsoft SQL-DMO (ODBC SQL state 42000)
The header for file d:power.mdf is not a valid database file header.The page audit property is incorrect.Restore could not start database "power".Backup or restore operation terminated obnormally
The partition on both servers are same and directory structure also same
Please help
Hi,
When I restore my database on other sqlserver,the system prompted "The database you are attempting to load was dumped under a different sort order ID(42) than the one current running on this server(52),and at least one of them is a non-binary sort order".
How can I do?
Any help will be appreciated!
I' have several database to restore. I created scripts.
Here is an example:
RESTORE DATABASE DatabaseName FROM DISK = 'C:DatabaseName.bak'
This is the error message:
Server: Msg 3154, Level 16, State 2, Line 2
The backup set holds a backup of a database other than the existing 'CAMS' database.
Any ideas???
Thanks in advance - Vic
HI,
While restoring a database from a backup file having extension .back we are getting the following error
"back is not part of the multiple family media set backup with format can be used to form a new media set"
Please guide me how to handle this error.
Thanks,
Karthik
Hi,
View 5 Replies View RelatedI'm trying to use schedulled task to automate restore and i keep getting the error database in use, it is set to dbo only and single user, and it has me as the user that has the lock, i have tried to kill it but it won't go, i have even started and stopped the server. any ideas?
View 2 Replies View RelatedDatabase Restore & Attach Error
I have a problem with restoring or attaching DB files from different version of the engine. I Have a existing SQL server 7.x and another one is SQL 2000 but I try to backup my database and restore it into the 2000 engine This is the following Problem which occurs :-
1st Problem : During Restoration, The restoration process was runing fine until it reach the last inficatior tab and it fail and say Database terminated abnormal. I been try to restore into other machine also but it give me the same problem.
2nd Problem : Say I can't restore but I stop the engine and manual copy the *.mdf and *.ldf to another machine. I try to restore it but it "is on a network device not supported for database files." So what shall I Do with it.
Pls Advise If anything need to be done before I do the restoring and anything need to be done in both 7.x and 2000 Engine.
:confused:
hi.. im having a hard time restoring my .bak file.... i have a stored procedure like this.. and every time i call this in my program an error displays... (database in use. the system administrator must have exclusive use ot the database to run the restore procedure)
CREATE PROCEDURE sp_db_restore
AS
RESTORE DATABASE Inventory
FROM DISK = 'C:MSSQL7BACKUPInventory.bak'
WITH MOVE 'Inventory_data' TO 'C:Inventory_data.mdf',
MOVE 'Inventory_log' TO 'C:Inventory_log.ldf',
REPLACE
'can u pls help me wd this.. tnx
Hi all,
I am trying to restore and SQL 2000 database into a new SQL 2005 database. I performed by SQL 2000 backup and created a blank database FERS_Production in SQL 2005. FERS_Production was the original name of the database in the SQL 2000 instance.
I have tried giving the new database the same name as the original and a different name to the original database
(Below is the scripted T-SQL that I get from the DB Admin tool
RESTORE DATABASE [Fers_Production]
FILE = N'FERS_Production_dat',
FILE = N'FERS_Production_log'
FROM DISK = N'D:Microsoft SQL Server (2000)MSSQLBackupFers_ProductionFers_Production_db_200607270206.BAK'
WITH FILE = 1,
NOUNLOAD,
REPLACE,
STATS = 10
GO
When I run this I get the following error.
Msg 3154, Level 16, State 4, Line 1
The backup set holds a backup of a database other than the existing 'Fers_Production' database.
Msg 3013, Level 16, State 1, Line 1
RESTORE DATABASE is terminating abnormally.
Other searches I have performed trying to fix this problem have said to use the REPLACE clause with the RESTORE DATABASE command, but as you can see I am doing that.
Also I no longer have SQL 2000 installed so I cannot try to do a DTS copy which was another suggestion I came across.
Any help is much appriciated, many thanks
Derek
hi
i have restore database use backup file in another machine of same name of database there following error
TITLE: Microsoft SQL Server Management Studio
------------------------------
Restore failed for Server 'database name'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Restore+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The backup set holds a backup of a database other than the existing 'dbname' database.
RESTORE DATABASE is terminating abnormally. (Microsoft SQL Server, Error: 3154)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=3154&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
Hi experts,
I had a database in sql server 2005 under instance name 'rohitcvman'. I took its backup. The computer is formatted and sql server 2005 is installed again with instance name 'rtamrakarcvmanager'. When I try to restore it, it ends up with the following message (copied from message box).
TITLE: Microsoft SQL Server Management Studio
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
ADDITIONAL INFORMATION:
Too many backup devices specified for backup or restore; only 64 are allowed.
RESTORE HEADERONLY is terminating abnormally. (Microsoft SQL Server, Error: 3205)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=08.00.0194&EvtSrc=MSSQLServer&EvtID=3205&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
I also have its 'MDF' and 'LDF' file. When I try to attach it, I get the following message:
TITLE: Microsoft SQL Server Management Studio
------------------------------
Attach database failed for Server 'rtamrakar'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach+database+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
Could not find row in sysindexes for database ID 15, object ID 1, index ID 1. Run DBCC CHECKTABLE on sysindexes.
Could not open new database 'CVManager'. CREATE DATABASE is aborted. (Microsoft SQL Server, Error: 602)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=602&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
I have not tried to restore/attach in the same instance name from which it was backed up. Is it compulsory to have same instance name to attach/restore?
Can any one help me?
Thank you.
I am using SQL server 2005 9.00.3042 . When I go to databases restore, restore to Northwind, from device
I select backup device and select SDLT. The actual backup device is LTO3.
The error is an exception occurred while executing a Transact-SQL statement of batch
Timeout expired. The timeout period elapsed prior to completion or the server is not responding.
I checked and we have no firewall turned on this server
I tried on another SQL 2005 9.00.3042 server - this one has an SDLT drive and the error is similar
Restore headeronly is terminating abnormally
We are running SQL 2000 sp4, only one user database (SAP) the database is 63 GB.
The ldf files were trashed so I went to tape to restore.
We are using veritas backup exec 9.1 sp4. Veritas is on the same server. I can restore the master db and the msdb fine. However when we attempt to restore the DEV db it runs for 2 hours and then fails with a communication error from veritas.
When we restore the master the DEV db comes up suspect as there are no files for it to attach to) so we cannot attach to it to restore, so I have deleted it and attempted to restore - same communication error. I have recreated a db named DEV with the mdf etc created to the size needed plus some to be sure, no good same behavior (behavior described below).
The job starts and it creates all the folders for the database (there are 1 MDF, 5 NDF, and 4 LDF files each in its own folder). Then it begins to create teh individual files it gets ~half way through at about an hour-hour and fifteen. During this time there are a large number of writes being performed by SQL (I assume it is creating the structures). Then it switches over to reading from tape a large number of read by beengine for another 45-1.5 hours then the job fails with the error unable to communicate with the device. I ahve noticed that once it starts reading from tape the db is gone from enterprise manager, and the mdf etc. files that were being created are now gone.
Help this has gone on for three days!!!
- First I made a full backup of master database
- Then I stopped SQL Server Service
- in cmd: cd C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQLBinn
then sqlservr.exe -m
- I entered that single user mode
---> Problem here:
- I tried to connect to sql by sqlcmd -E --->
HResult 0xE9, Level 16, State 1
Shared Memory Provider: No process is on the other end of the pipe.
Sqlcmd: Error: Microsoft SQL Native Client : Communication link failure.
---> I tried to connect to management studio:
TITLE: Connect to Server
------------------------------
Cannot connect to BISHOYSERVER.
------------------------------
ADDITIONAL INFORMATION:
Login failed for user 'OFFICIALPROJECTAdministrator'. Reason: Server is in single user mode. Only one administrator can connect at this time. (Microsoft SQL Server, Error: 18461)
I am having difficulty restoring a database (DB_1) with 2 datafiles and one log file, DB Structure is as following:
Filegroup PRIMARY with file name 'fnm_data' with physical file name and location D:dbfile_1.mdf,
Filegroup 'FG1' with file name 'fgnm1_data1' with physical file name and location F:dbfile_FG1.mdf,
One log file with file name 'fnm_log' with physical file name and location (E:loglog_db.ldf)
{Note} Logfile resides on E drive whereas Datafiles reside on several other drives.
I need to restore the DB on another machine. And I need to move the log file to a drive other than E.In this case it is K drive. Hence I have used the following code,
restore log DB_1 from disk='M:kupccciclog.txt'
WITH RESTRICTED_USER , MOVE 'fnm_log'
TO 'K:DBlog_db.ldf', recovery, replace,RESTART
go
When I try to restore from backup files, I keep error message saying "Physical file name E:loglog_db.ldf may be incorrect." 'fnm_log' cannot be restored. Use Move command to identify a valid location for the file.
Even though I am using Move command to move the log file.
Then I found that if I create a drive with E: and a folder named 'log' then restore program runs alright. That is, when E:log exists then code does run smoothly. All the restore code is looking for the presence of path of the log file from where it is been backed up. In this case it is E:log folder. Once the database is restored I could kill that directory and nothing happens. Also log file has been restored on K:DB only.
Why the restore code is looking for the initial drive letter and path even though I have used Move command? Is there an issue in my code?
Any help will be highly appreciated.
We have received a backup of a database from an external company for a project that we are taking over. We have attempted to restore the database and it fails giving us the error: "Internal consistency error occurred."
We have run the restore verifyonly command with the results: "The backup set is valid." However, I don't have confidence that the verify is telling the complete story.
It appears that the database is restored and the overall restore is failing on the transaction log file.
Any help is appreciated. This is rather urgent.
I'm working on SQL 2012 Box, which is having Logshipping failed on secondary database, the secondary database was in stand by mode right now but no more restore operation performed on this database since 2 weeks! We checked in the SQL error log and found the error code 14421, severity 16, stat: 1
How to reset the logship back to normally, do I need to disable the jobs before proceed any operation!
I'm having an issue to restoring database from prod to report server. I'm getting following error.
When I did Manually I got first error as below.
Msg 233, Level 20, State 0, Line 0 A transport-level error has occurred when sending the request to the server. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)
This is the second error
Msg 3044, Level 16, State 1, Line 37
Invalid zero-length device name. Reissue thestatement with a valid device name.
Msg 3013, Level 16, State 1, Line 37
RESTORE DATABASE is terminating abnormally.
Msg 5011, Level 14, State 5, Line 45
User does not have permission to alter database 'XeP', the database does not exist, or the database is not in a state that allows access checks.
Msg 5069, Level 16, State 1, Line 45
ALTER DATABASE statement failed.
Script Which I used.
USE Master;
GO
SET NOCOUNT ON
-- 1 - Variable declaration
DECLARE @dbName sysname
DECLARE @backupPath NVARCHAR(500)
[Code] .....
I have seen this before. A 2000 restore fails, leaving the database thinking it is being restored but the restore job failed and errors when it is restarted. EM is clueless. I believe there is a proc to reset some flag. Can you share it with me???
Thanks!
hi
i try to restore a bak file from another sql2005 server to my sql2005 server, but it show the error message as below :
TITLE: Microsoft SQL Server Management Studio Express
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.Express.ConnectionInfo)
------------------------------
ADDITIONAL INFORMATION:
Cannot open backup device 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBackupackup.bak'. Operating system error 5(error not found).
RESTORE HEADERONLY is terminating abnormally. (Microsoft SQL Server, Error: 3201)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=3201&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
pls some one can help me ???
thanks
chaus
11/19
Trying to keep out sysadmins & sa during/between database RESTORE
Configuration:
WINNT Server Enterprise 4.0 w/SP5
SQL Server 7 Enterprise & SP1
2 SQL Servers:
Production Server
Standby server
I Backup (full backup) databases to disk on primary server (logical backup devices are physicaly located on a Standby server (dedicated gigabit NIC in each server for this process). Transaction logs are applied to the Standby server throughout the day.
Problem:
How to keep out "sa" and sysadmins from a database while I'm restoring (or between restores) to a standby server?
The database being restored cannot be in use during a restore.
If a DBA forgets that this process is happening, the statement fails (RESTORE)for the database they happen to be in at the time of the restore.
Example restore statement:
Standby Server -
RESTORE DATABASE databasename FROM database_dd WITH DBO_ONLY, REPLACE, STANDBY = 'g:Mssql7FromPrimaryDatabaseName_undo.ldf'
I could restrict Domain sysadmin access and change sa password. I could also put the database in "Single user" mode, however this could become problem if my process disconnects and then someone else connects - then my process is locked out. What I'm really looking for is to lock out all activity for a database that is in "standby mode" except for RESTORE processes.
Any ideas??
Wade
wadej@vailresorts.com
I'm taking a database(read-only) backup from one server and restoring it on other server. As soon as restore is done it is bringing database into single-user read-only mode.
why it is bringing the database into single user mode ?
Hello,i am in great trouble. I want to revert back to original state ofdatabase before i performed restore database on my sql server 2KDatabase. Accidently i didn't take backup of my Database and i didrestore, so is there any way to get the original state back of myDatabase?Any suggestion will be highly appriciated.Regards,S. Domadia.
View 2 Replies View RelatedAnybody figure a way around this:
In a development server you take a backup and you want to move the entire database to a production server. The production server does not contain the database, users, or logins in master.
When you restore the backup to production in 7.0, the users get moved to DBO because the logins do not exist and then you cannot delete them.
We are having to drop the users from the database on development, back up the database and restore it to production, then recreate the users on production.
This is bogus and did not happen in 6.5 because of the aliases.
Anybody come up with a better way?
I am fairly new to VS 2005 and SQL Server CE. I have developed a Desktop Windows application using VB 2005 and the SQL Compact Edition Database. This application will sell to users via web download.
When they download a service patch, or updated version, I wish for them to retain the data in their present database. In other words, fill the new database with the old data. The new table structures will remain intact except for added columns at the end.
Question is how to save the old data and update the new database with it. Is there an easy way to do this, or do I need to write a module to save a database copy, and update the new database with content at install time?
I have a problem when i restore my .DAT_BAK file. I am getting error like "The backup set holds a backup of a database other than existing database. Restore Database is terminating abnormally".
I tried by using
RESTORE DATABASE <DATABASENAME>
FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH MOVE 'VZAI_DATA' TO D:PROGRAM FILES..MSSQLTEST.MDF',
MOVE 'VZAI_LOG' TO D:PROGRAM FILES..MSSQLTEST.LDF',
REPLACE
And also i tried like
RESTORE DATABASE <DATABASENAME>
FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH REPLACE
When i use like this,
RESTORE FILELISTONLY FROM DISK = 'D:DATAMYTEST.DAT_BAK'. I am able to get the output as LogicalName, PhysicalName, Type, FileGroupName, Size, etc.
Can i anyone please help me out?
Thanks in Advance,
Anand Rajagopal
Sometime during the night last night some user account permissions were "lost". Am I right to think that restoring the master database would be the way to go? We have a 2 node 2012 cluster and I stop the cluster resource and start the db in single user mode from the active node. Somehow the sharepoint farm is still trying to connect so I can't get logged in single user. What method could I use to stop users from connecting when I don't have access to the sharepoint farm.
View 8 Replies View Relatedi have a development database that has updates and changes to a production database. rather than go through individually and alter all relevant tables and stored procedures, id like to back up the database on the development side and restore it on the production side as the production database. is there a way to restore the database on the production server but preserve all the security settings (ie logins and such)? i noticed on our development server, that if i try to restore the database with my development database, it overwrites the users and/or if the user is the same on both, it removes the login name for that user.
View 3 Replies View RelatedHi,
I was wondering how I could restore a bkp file into a database with a different name. For example, I made a backup of T1.mdf and i want to restore t1.bkp to T2.mdf.
I am using VB.Net to do the backup and restore.
Is there any way of doing it?
Thanks!
I have a client that has POS software called Restaurant Pro Express (RPE) from [URL] ...
Their old POS computer had a hardware failure, but I was able to attach the hard-drive to another computer and recover the data. RPE uses a MSSQL database system. However, my client doesn't seem to make backups very often
- the last one is dated January 5, 2015. I was able to copy the C:Program FilesMicrosoft SQL Server folder over which contained the instance as well as all the data files - and has up-to-date information. The instance in the recovered Microsoft SQL Server folder was called MSSQL.1. I installed the RPE software on their new computer, and it too now has an instance called MSSQL10_50.PCAMERICA. The new computer is using MSSQL 2008 R2, while I believe the old computer would have been using MSSQL 2005.
I am no DBA expert, especially when it comes to MSSQL. Is is possible to 'restore' the database from the 'raw' .mdf and .ldf files of the old computer to the new computer / database instance? If so, how should I proceed?
Hi,
I have a 40G database that I am trying to restore from tape. The original server has sp2 on it. On my first try I got a corruption error while restoring the database and later found on technet that a backup from a database that has "auto shrink" option enabled, might give corruption error 9004, and this is fixed with sp3. So I turned off the auto shrink off, took another tape bacdkup and tried restoring again, and this time I got the following error;
...
Processed 19 pages for database 'AGENT_CONNECT', file 'agent_connect_5_Log' on file 1.
Server: Msg 3624, Level 20, State 1, Line 1
Location: pageref.cpp:3889
Expression: pPage->GetLsn () == lp->GetPrevPageLsn ()
SPID: 14
Process ID: 129
Connection Broken
Can't even track the error number down on technet.
Any ideas?
Thanks very much in advance
B.
We are taking database backup using SQL backup option and trying to restore the database on another server giving the following error
Microsoft SQL-DMO (ODBC SQL state 42000)
The header for file d:power.mdf is not a valid database file header.The page audit property is incorrect.Restore could not start database "power".Backup or restore operation terminated obnormally
Please help