Hi, i need help about restore a DB
I did a backup of a database using SQL Server Management Studio, but when i try to restore my database now, i get this error:
TITLE: Microsoft SQL Server Management Studio
------------------------------
Restore failed for Server 'Athenas'. (Microsoft.SqlServer.Smo)
System.Data.SqlClient.SqlError: The media set has 2 media families but only 1 are provided. All members must be provided. (Microsoft.SqlServer.Smo)
What do i doing so bad??
Thanks for ur opinions and help.
Regards
------------------------------------------
I have done a full backup on 3pm, and a differential backup on everyday 5pm.
I try to restore it back in my testing server and i encounter the problem in restoring the File3 and i try to restore the File 2 and it is okie. Can i know wat is the problem usually cause this error? Thank you
I am getting following error in windows event viewer so can u tell me how to slove this problem
1.The log shipping primary database Aric-PCSQL2005.AdventureWorks has backup threshold of 30 minutes and has not performed a backup log operation for 319 minutes. Check agent log and logshipping monitor information.
2.The log shipping secondary database Aric-PCDEVSQL1.AdventureWorks has restore threshold of 5 minutes and is out of sync. No restore was performed for 304 minutes. Restored latency is 15 minutes. Check agent log and logshipping monitor information.
I am using sql 2000 standard. I set up log shipping 3 month ago it was working fine but yesterday its fail I got this error 4305. I don€™t know why this error I am getting
error messages:
failure /4305
activity : Load
[Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 4305: [Microsoft][ODBC SQL Server Driver][SQL Server]The log in this backup set begins at LSN 7000000026200001, which is too late to apply to the database. An earlier log backup that includes LSN 6000000015100001 can be restored. [Microsoft][ODBC SQL Server Driver][SQL Server]RESTORE LOG is terminating abnormally.
First I am fairly new to SQL Server 2005 Clustering so this is why I was to see if any of you might be able to help me.
Are current setup is as follows:
CRM1 SERVER 2K3 R2 xxx.xxx.xxx.74
CRM2 SERVER 2K3 R2 xxx.xxx.xxx.75
HP MSA1000 xxx.xxx.xxx.75
MSDTC IP xxx.xxx.xxx.77
SQL INSTANCE xxx.xxx.xxx.78
Now are CRM guys are trying to connect to xxx.xxx.xxx.78 for there SQL instance or RDP into this ip address and they can’t…Now the question is should they be able yto logon to the SQL Instance via RDP?
Hi everyone i get an error messgae running the following code
DECLARE @mailist VARCHAR(max) SET @mailist='' SELECT TOP 1 @mailist=@mailist + email +';' FROM email.dbo.mytable SET @mailist=STUFF(@mailist,LEN(@mailist),1,'') SET @mailist='''' + @mailist + ''''
EXEC msdb.dbo.sp_send_dbmail @profile_name='my_mail_profile', @recipients=@mailist, @subject='mysubject', @body_format='html', @body= ' <html> <head> <title> problems with send_dbmail </title> </head> <body> this is not working </body> </html> '
The error says:
quote:
Syntax error in parameters or arguments. The server response was: 5.5.4 Invalid Address)
At the other hand, if i assign a straightforward @recipints address such as EXEC msdb.dbo.sp_send_dbmail @profile_name='my_mail_profile', @recipients=my@mail.com
A few months ago, I was trying to install SQL Server 2005 SP2 on a cluster (Active-Active), the Cluster has 3 instances, 2 lives in one node and the other one in the other node. When I try to make the deployment an error message appear, I do not have the error right now but it€™s something like €œCould not connect to the passive node, installation failed€?. The worst part of the error was all instances shut down and I couldn€™t bring on line and I have to reinstall all instances. I need to install SP2 but I€™m a little afraid fail again. Do you know the best way to deploy the SP2 on a cluster? Maybe move all instances in one node before install SP2? Can you help me with your comments. Do you think I have problems with the windows cluster?
When i attempted to connected to Microsoft SQL Server 2005 Express via ASP.NET 2.0 application, it seems to throw the following error.
I had set up the Protocols for Express (TCP/IP and Named Pipes are both enabled) to allow remote connections using both TCP/IP and named pipes. Login failed for user ''. The user is not associated with a trusted SQL Server connection.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Login failed for user ''. The user is not associated with a trusted SQL Server connection.
Source Error:
The source code that generated this unhandled exception can only be shown when compiled in debug mode. To enable this, please follow one of the below steps, then request the URL:
1. Add a "Debug=true" directive at the top of the file that generated the error. Example:
<%@ Page Language="C#" Debug="true" %>
or:
2) Add the following section to the configuration file of your application:
Note that this second technique will cause all files within a given application to be compiled in debug mode. The first technique will cause only that particular file to be compiled in debug mode.
Important: Running applications in debug mode does incur a memory/performance overhead. You should make sure that an application has debugging disabled before deploying into production scenario.
I have tried to install SQL Server 2005 Standard edition with CLUSTERING. I faced a problem and everything rolls back.
TITLE: Microsoft SQL Server 2005 Setup ------------------------------
SQL Server Setup was unable add user domain1xyz to local group domain1IT Security Admin-Group.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=setup.rll&EvtID=29512&EvtType=sqlca%5csqlsecurityca.cpp%40Do_sqlGroupMember%40Do_sqlGroupMember%40x6ba
I have refered to PostI=1659185 posted by Fly and it still won't be able to fix my problem.
I have added LOCAL SERVICE into the local group (SQLServer2005MSFTEUser$AAA$MSSQLSERVER), but it still can't work.
Please can someone help me on this. Thank a lot....
I tried to install SQL Server 2005 (x64) Standard Edition on Windows Server 2003 R2 (x64) Standard Edition. My box meet the requirement. But I got the following error when the installing progress was just about to begin:
Error 1016:Could not access network location k.3643236F_FC70_11D3_A536_0090278A1BB8]URTVersio.
(this is exactly what i saw in the system log)
what does it mean?? i am totally confused...what the hell is the k.3643236F_FC70_11D3_A536_0090278A1BB8]URTVersio????
When the setup program tries to start the database service (the last step of installation), it indicates an error 29503.
The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually." The error is (17058)
I've been trying to install the following update: Microsoft SQL Server 2005 Express Edition Service Pack 2 (KB 921896). I always recieve the following error: 2B22,
Hi Team, I try to restore my local database using the backup from the live server. However I encountered this type of error: ==================================================================== System.Data.SqlClient.SqlError: The path 'C:Microsoft SQL ServerFullTextApplication_FullText' has invalid attributes. It needs to be a directory. It must not be hidden, read-only, or on a removable drive. (Microsoft.SqlServer.Smo) ==================================================================== It worked before I added a full-text search feature. Any idea? Thanks in advance.
Hi,I am using SQL Server 2005 Enterprise edition. I face a problem when I want to restore a database. DataDB.mdf is the database file, When i want restore it using Sql server management studio it show the following error. TITLE: Microsoft SQL Server Management Studio ------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
The media family on device 'C:DatabaseDataDB.mdf' is incorrectly formed. SQL Server cannot process this media family. RESTORE HEADERONLY is terminating abnormally. (Microsoft SQL Server, Error: 3241)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.3042&EvtSrc=MSSQLServer&EvtID=3241&LinkId=20476
------------------------------ BUTTONS:
OK ------------------------------Any suggestions are welcome.Best Regards
Morning guys, What is the equivalent to the taskpad on sql server 2005? I want to be able to see when the last backup and restore was performed via transact sql ...... how would you go about that..... ? what would I search... ?
Hi, I am trying to restore a production copy. I have only the .bak file with me. While restoring, i m facing the following error. can u please help me... thanks in advance.
"MODIFY FILE encountered operating system error 112(There is not enough space on the disk.) while attempting to expand the physical file."
I have placed the data files(52GB) in D: drive(140GB free space) and transaction log file(100GB) in F: drive(465GB free space). Still i am facing this error...
I´ve backup my databases into a Tape Device that wa named as [Tape Device].
I´m using a job to perform this action.
Basically I´ve do a Full backup to this tape and apprently it´s working fine.
The problem is when I´m trying to perform a restore.
I´m using MSMS to perform this restore.
I´m tryin to see the contenct of the Tape and I´m getting this error:
===================================
System.Data.SqlClient.SqlError: Cannot open backup device 'Tape Device(\.Tape0)'. Operating system error 32(error not found). (Microsoft.SqlServer.Smo)
------------------------------ For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&LinkId=20476
------------------------------ Program Location:
at Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteWithResultsAndMessages(String cmd, ServerMessageEventHandler dbccMessageHandler, Boolean errorsAsMessages) at Microsoft.SqlServer.Management.Smo.BackupRestoreBase.ExecuteSqlWithResults(Server server, String cmd) at Microsoft.SqlServer.Management.Smo.Restore.ReadMediaHeader(Server srv) at Microsoft.SqlServer.Management.SqlManagerUI.BakDevMediaContents.InitMediaInfo(Restore sqlRestore) at Microsoft.SqlServer.Management.SqlManagerUI.BakDevMediaContents.InitProp()
SQL Server 2005 TR with IU/QUS - Restore from a backup
Im trying to set-up the above using sp1. It all works fine until the final step, creating a subscription through sp_addarticle and Im getting the following error:
Msg 8152, Level 16, State 10, Procedure sp_MSget_synctran_commands, Line 198 String or binary data would be truncated.
This worked fine on my laptop with a small table with a couple of columns.Now Ive looked at this error and its like
select * from #art_commands
The table only has 49 columns in it, so its not huge.
What are my options for solving/getting around this problem:
1. Try and fix sp_MSget_synctran_commands, from memory, #art_commands has a nvarchar(max) column and Im wondering if this is related. must admit, havent really looked solidly at this sp yet.
2. SP2 doesnt look like it fixes this problem.
3. Create a bespoke method to replicate.
4. anymore for anymore?
It will be impossible to synchronize the databases so this restore from backup was my only option. Im a bit stuck now, can anyone help?
I have a SQL Server 2005 Database that I would like to export to SQL Server Express.
How do I go about this?
I've tried backing it up, creating a new (blank) SQL Server Express Database and trying to restore it, but get the following message ------------------------------
Restore failed for Server 'PRODSOL-LAPTOP1SQLEXPRESS'. (Microsoft.SqlServer.Smo).
Hi, Our Sharepoint of TFS was down a couple of days ago. By luck, we had fully backed up SQL database. Now, the problem is, I uninstalled everything and tried to move TFS to a new server machine on the domain. I installed freshly everything and tried to restore all the databases (with tables also). Now the problems are these:
1 - Since there are lots of different backup-restore procedures telling on the Internet from some forums and this forum also: What should i do basically to make the configuration of Sharepoint and Reporting Services to make them work correctly?
2 - Secondly, even if i fail in the problem above, I, at least, want to save the source control files and sharepoint files. Where can I find them and how can I take them back to my new TFS installation?
3 - If these problems exist and Suppose on a new project on the new installation, i create new WI's, documents (with new Version Control information), and new SPS configuration. And on a new release,the problems are resolved. Is there some way that I can merge the former Backup with the new installation's database?
Hi All I have Computer is setuped SQL Server 2000 and SQL server 2005 when I restore SQL Server 2005 it's OK but when it's not OK when I restore in SQL Server 2000. The Error as follows:
Hi Friends,I have installed SQL server 2005 Express Edition and SQL Server managementI have a SQL server 2000 db backup file. I try create a new database in my SQL server 2005 express Edition and try restore that backup file from device, it only searching for file with *.bak and *.tm extension! I tried generate backup file with .bak extension and tried restore into SQl server 2005 express edition but still it is not allowing to do so! I also tried copy my database's data file and log file and paste it under SQL server 2005 express edition Data folder and still not able to read the tables.Is that any ways to do restoring for this SQL server 2000 backup file into SQL server 2005 express edition! Anybody can help me on this please...:eek:
I would like to know if it's possible to restore a x64 Backup on a SQL Server 2005 32-bits. I have found no options during the backup under SQL Server 2005 x64 to allow the compatibility for x86.
Thanks you in advanced for future answers. Regards, Flore.
May Any one guide me? I have a backup file of database which is in SQL Server 2000. it has no Extension.I want to restore this backupfile or this database in my SQL Server 2005. I have tried to Attach Database or attach this backup file in Sql Server2005 but it also fails . First I have created New database name as is on the backupfile and then I have also tried to rename this file with .bak extension and then try to restore again it fails. Plese Guide me urgently........ :eek: :eek: :eek: :eek: :eek:
This is a very urgent requirement of my client having 200 stores and one Head office. the HO has just installed SQL-Server 2005, The HO sends small backups of the data related to stock transfer which needs to be restored at stores. It was working find when both the HO and stores were SQL-Server 2000. but the process has come to a dead halt as the HO has SQL-Server 2005. It is not possible to convert the stores immediately. please help me out.
I had a database in sql server 2005 under instance name 'rohitcvman'. I took its backup. The computer is formatted and sql server 2005 is installed again with instance name 'rtamrakarcvmanager'. When I try to restore it, it ends up with the following message (copied from message box).
TITLE: Microsoft SQL Server Management Studio ------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
Too many backup devices specified for backup or restore; only 64 are allowed. RESTORE HEADERONLY is terminating abnormally. (Microsoft SQL Server, Error: 3205)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=08.00.0194&EvtSrc=MSSQLServer&EvtID=3205&LinkId=20476
------------------------------ BUTTONS:
OK ------------------------------
I also have its 'MDF' and 'LDF' file. When I try to attach it, I get the following message:
TITLE: Microsoft SQL Server Management Studio ------------------------------ Attach database failed for Server 'rtamrakar'. (Microsoft.SqlServer.Smo) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach+database+Server&LinkId=20476 ------------------------------ ADDITIONAL INFORMATION: An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo) ------------------------------ Could not find row in sysindexes for database ID 15, object ID 1, index ID 1. Run DBCC CHECKTABLE on sysindexes. Could not open new database 'CVManager'. CREATE DATABASE is aborted. (Microsoft SQL Server, Error: 602) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=602&LinkId=20476 ------------------------------ BUTTONS: OK ------------------------------
I have not tried to restore/attach in the same instance name from which it was backed up. Is it compulsory to have same instance name to attach/restore?
I am using SQL server 2005 9.00.3042 . When I go to databases restore, restore to Northwind, from device I select backup device and select SDLT. The actual backup device is LTO3. The error is an exception occurred while executing a Transact-SQL statement of batch
Timeout expired. The timeout period elapsed prior to completion or the server is not responding. I checked and we have no firewall turned on this server
I tried on another SQL 2005 9.00.3042 server - this one has an SDLT drive and the error is similar Restore headeronly is terminating abnormally
Is there a way to grant rights to a user to be able to restore a specific database on a server, without being able to muck around with other databases on the server?
I have a database backup from Server Express 2005 that I want to restore to SQL Server 2000. I keep getting an error message saying it was created a newer version and wont work. Is there a workaround to this.
I am moving my data base from one computer to a new one. I placed the .bak file in the backup folder on the new computer (Windows Vista). I keep getting these errors I have checked the security settings and my user account has full privledges. I added my windows login to the SQL Administrators as well.
Here is the error msg.: TITLE: Microsoft SQL Server Management Studio Express ------------------------------
Restore failed for Server 'laptopsqlexpress'. (Microsoft.SqlServer.Express.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Restore+Server&LinkId=20476
System.Data.SqlClient.SqlError: The operating system returned the error '5(Access is denied.)' while attempting 'RestoreContainer::ValidateTargetForCreation' on 'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLPRM - 6009757.mdf'. (Microsoft.SqlServer.Express.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&LinkId=20476
------------------------------ BUTTONS:
OK ------------------------------ What am I missing?
