Hi ,
While running the load cmd - 'Load database dbname1 from disk='c:empdump1.dat'
through ISQL I am getting the following error
1 transaction rolledback dbid error 7.But when I tried restoring using enterprice manager UI it is working fine.Any body knows why it is happening like this .
Thanks in advance
Jiji
I'm new to SQL server, so bear with me please.
I'm running NT4 SP3 SQL 6.5 SP5. I have one major database (son_db) which is being backed up (along with others) using this command:
DUMP DATABASE son_db TO DBTape WITH NOUNLOAD , STATS = 10, NOINIT , NOSKIP
The task is completing successfully each night. However, we want to test the restore of this database, so we created a test table (test_table) which resides in the son_db database, added some data, and then let the backup run.
Next day we alter some data and try to restore the single table, but consistantly get the following message after clicking on the restore button:
[SQL Server] invalid source table "test_table" specified in LOAD TABLE. Could not find table in SYSOBJECTS in dump.
After this error, the table (test_table) is now completely empty.
MS website is no help, so I would really appreciate a bit of guidance on this,
Many thanks,
Joe
MCSE (but not including SQL!)
Hello, I have a SERIOUS problem where I am restoring my SQL server (6.5) dump to my standby server everyday.......however, it often fails with the following msg:
'Unexpected end-of-dump while loading database, attempting to continue. Please verify database integrity. (Message 3103)'
It does also succeed, but too often fails and my standby server depends on it. The DB that gets restored is placed in single-user mode, so no other process or connection is allowed.
The backup to PROD runs at 12AM, for about 3 hours and succeeds always; the restore runs at 4:00...i've tried later times as well.
Can anyone tell me how to get near 100% success rate? What is the problem and how can I fix it? Thank you for the help.
To restore the Master DB, BOL says to start SQL Server in single user mode.
I do this using: sqlserver.exe -m
The server appears to startup (Recovery complete message, etc.).
Then I take care to minimize the command window. The command
window now appears on my task bar.
I start EM and navigate my way to the Restore Database menu pick.
I fill out the appropriate boxes, etc. I get a window telling me that
the restore has been started.
Very shortly I get a popup window telling me the connection has been
lost. When I examine my taskbar, I no longer see the Icon for the
command line/window. Thus it appears to me that the server
running in single user mode has gone away and this explains
the reason for the window saying that the connection has been
lost.
I then start SQL Server, per normal.
I run DBCC CHECKDB. This tells me there are 0 allocation errors
and 0 consistency errors. Several thousand rows of data present.
Thus the master DB appears to be OK.
However I am unable to restore it.
Any ideas or suggestions would be appreciated.
I'm trying to use ADO to restore a SQL 7 database using a backup file. Thedatabase already exists on the target computer, and is named the same as onthe source computer, and the MDF and LDF files are named the same as well.I am running the below in a stored procedure:RESTORE DATABASE DB1FROM DISK = 'c:mssql7ackupDB1.bak'WITH MOVE 'DB1' TO 'c:mssql7dataDB1.mdf',MOVE 'DB1_log' TO 'c:mssql7dataDB1_log.ldf'And I get an error message "File 'DB1' is not a database file for database'DB1' ".I also tried it without the LDF file in the expression. Same results.Thanks.
View 5 Replies View RelatedHello,
I have a file backup of a database from machine 1. I create an empty database with the same name on machine 2 and copied the backup file to machine 2. When I run a restore database, I get "Preceeding restore operation did not specify WITH NORECOVERY OR WITH STANDBY.Restart tehe restore sequence, specify the options for all but the final step. Restore failed"
Database : SQL 7.0 Trying to restore from the Enterprise manager
ANy clues as to what might be wrong.
Thanks, MMS
Get the following error when trying to restore from one SQL 2005 server (64-bit, standard edition) to another (32-bit, enterprise edition).
Msg 3169, Level 16, State 1, Line 1
The backed-up database has on-disk structure version 611. The server supports version 539 and cannot restore or upgrade this database.
Msg 3013, Level 16, State 1, Line 1
RESTORE DATABASE is terminating abnormally.
I am set up log shipping  as backup and copy every one hour and restore every ( disconnect users and stand by) one hour on servers in same domain. Set-up completes successfully.Copy job works as expected. but the restore job fails intermittently to restore the .trn file saying ' could not apply  log, data invalid' .
when i  delete and copy the files for which restore failed  manually using CTRL+C and CTRL+V across network and re run the restore job it does restore successfully . Through out the day i get about 5-6 problematic .trn files on secondary server which are copied from primary server and when restore fails i have to manually delete the log file which had problem restoring and then copy that file again using CTRL+C and CTRL+V  then run the restore and it gets restored successfully.when running restore filelistonly on the logfile in issue on secondary server  it gives below error
Cmd:
RESTORE verifyonly
FROM disk='G:xxxx_Copyxxx_20150604010501.trn'
Error:
Msg 3203, Level 16, State 1, Line 2
Read on "G:xxxxxxx_20150604010501.trn" failed: 13(The data is invalid.)
Msg 3013, Level 16, State 1, Line 2
VERIFY DATABASE is terminating abnormally.
and when i run restore filelistonly using netwok path then is seem s good and i can restore the logs as well
CMD:
RESTORE verifyonly
from disk='1.2.3.4xxx_Backupsxxx_20150604010501.trn'
Output:Â The backup set on file 1 is valid.I can assure there is no corruption on the log back up, no lsn mismatch, no log files missing.Same version and edition on both servers. Both servers are SQL server 2012 Enterprise edition on window server 2012Â
I am trying to restore a production database backup to a new location on a development workstation, and it fails with "An internal consistency error occurred, Contact Support". When I tried this on a more powerful workstation it ran without a hitch. The db is about 1.5GB, and I think the dev workstation may be running out of resources during the restore. I stopped non-essential services and ran from TSQL, and it still fails. Any suggestions other than getting a better workstation?
Thanks,
Rob
We are doing the following steps:-
1. Weekly Full Bckup
2.Daily Differential backup
3.hr Log back up
The following command works fine for all the Backups. it means backup file is fine.
RESTORE FILELISTONLY from DISK = 'D:BackupewDB_ full.BAK'
RESTORE HEADERONLY FROM DISK = 'D:BackupewDB_ ull.BAK'
RESTORE LABELONLY FROM DISK = 'D:BackupewTest_full.BAK'
RESTORE VERIFYONLY FROM DISK = 'D:BackupewTest_full.BAK'
Also The full back up restoration works fine:
RESTORE DATABASE Test3 FROM DISK = 'D:BackupewTest_full.BAK'
WITH MOVE 'Test2_Data' TO 'F:MSSQL2KMSSQLdataTest2Net_Data.MDF',
MOVE 'Test2_Log' TO 'F:MSSQL2KMSSQLdataTest2Net_Log.LDF',
NORECOVERY
GO
/* RESULT :
Processed 1032 pages for database 'Test3', file 'test2_Data' on file 1.
Processed 1 pages for database 'Test3', file 'test2_Log' on file 1.
RESTORE DATABASE successfully processed 1033 pages in 1.907 seconds (4.433 MB/sec).
*/
But While restoring the Differential file it throws error:
RESTORE DATABASE Test3 from DISK = 'D:Backupew est2_Diff1.bak'
WITH NORECOVERY
GO
Msg 3136, Level 16, State 0, Line 1
Cannot apply the backup on device 'D:Backupew est2_Diff1.bak' to database 'Test3'.
Msg 3013, Level 16, State 1, Line 1
RESTORE DATABASE is terminating abnormally.
I checked the SQL Server Log no error msg corresponding Differential backup restore.
I don't know how to proceed further.Can any one guide me how to over come this..
Thanks !
We are running SQL 2000 sp4, only one user database (SAP) the database is 63 GB.
The ldf files were trashed so I went to tape to restore.
We are using veritas backup exec 9.1 sp4. Veritas is on the same server. I can restore the master db and the msdb fine. However when we attempt to restore the DEV db it runs for 2 hours and then fails with a communication error from veritas.
When we restore the master the DEV db comes up suspect as there are no files for it to attach to) so we cannot attach to it to restore, so I have deleted it and attempted to restore - same communication error. I have recreated a db named DEV with the mdf etc created to the size needed plus some to be sure, no good same behavior (behavior described below).
The job starts and it creates all the folders for the database (there are 1 MDF, 5 NDF, and 4 LDF files each in its own folder). Then it begins to create teh individual files it gets ~half way through at about an hour-hour and fifteen. During this time there are a large number of writes being performed by SQL (I assume it is creating the structures). Then it switches over to reading from tape a large number of read by beengine for another 45-1.5 hours then the job fails with the error unable to communicate with the device. I ahve noticed that once it starts reading from tape the db is gone from enterprise manager, and the mdf etc. files that were being created are now gone.
Help this has gone on for three days!!!
1. Created a database with a couple of tables with no data.
2. Taken a full database backup - db.bak.
3. Deleted the database.
4. Restored the database db.bak and filled the tables with some data.
5. Taken log backup - dblog.trn
BACKUP LOG <dbname> to DISK='D:Demodblog.trn' WITH NO_TRUNCATE, INIT
6. Dropped the database again.
7. Restored the database again from db.bak.
8. But when I am trying to restore log file dblog.trn on this database, i keep getting this error :
The log or differential backup cannot be restored because no files are ready to rollforward.
Msg 3013, Level 16, State 1, Line 2 RESTORE LOG is terminating abnormally.
Hello,
I have a fresh install of sqlExpress and Management Studio Express on my test server. I want to restore my master database from backup.
From the command prompt I set the Sqlservr -s SQLEXPRESS -m
Then I opened another comand prompt and ran my SQLCMD script to restore the Master Database.
here is the sql script:
RESTORE DATABASE [Master] FROM DISK = N'E:COPLEYNEWSDATABASEBACKUPMaster.bak' WITH FILE = 1, MOVE N'mastlog' TO N'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAMaster_1.ldf', NOUNLOAD, STATS = 10
GO
I recieve the following error.
Msg 3154, Level 16, State 4, Server COPLEYNEWSSQLEXPRESS, Line 1
The backup set holds a backup of a database other than the existing 'Master' dat
abase.
Msg 3013, Level 16, State 1, Server COPLEYNEWSSQLEXPRESS, Line 1
How do I restore a Master Database on SQL Express?
Hi,
I run 2 steps viz with NORECOVERY and with RECOVERY in sequence as SQP jobs. The 2nd step fails some times. When it starts failing, I run full backup of the production server again and the 2nd step starts succeding. Unless I run the full backup the 2nd step keeps on failing.
What are the conditions which generate for [SQLSTATE 42000] (Error 3013) and how to tackle this problem.?
The 2 steps are :-
1.RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH
Replace ,
MOVE 'arsystem' TO 'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
NORECOVERY
GO
2.RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionSQL daily diff back up'
WITH
Recovery
The status of the 2 steps is :
1 Executed as user: BPOTESTREMEDY
emedybackup. Processed 104480 pages for database 'ARSYSTEM', file 'ARSystem' on file 1. [SQLSTATE 01000] (Message 4035) Processed 1 pages for database 'ARSYSTEM', file 'ARSystem_log' on file 1. [SQLSTATE 01000] (Message 4035) RESTORE DATABASE successfully processed 104481 pages in 49.452 seconds (17.307 MB/sec). [SQLSTATE 01000] (Message 3014)
2. Cannot apply the backup on device 'E:SQL backup from productionSQL daily diff back up' to database 'ARSYSTEM'. [SQLSTATE 42000] (Error 3136) RESTORE DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed.
11/19
Trying to keep out sysadmins & sa during/between database RESTORE
Configuration:
WINNT Server Enterprise 4.0 w/SP5
SQL Server 7 Enterprise & SP1
2 SQL Servers:
Production Server
Standby server
I Backup (full backup) databases to disk on primary server (logical backup devices are physicaly located on a Standby server (dedicated gigabit NIC in each server for this process). Transaction logs are applied to the Standby server throughout the day.
Problem:
How to keep out "sa" and sysadmins from a database while I'm restoring (or between restores) to a standby server?
The database being restored cannot be in use during a restore.
If a DBA forgets that this process is happening, the statement fails (RESTORE)for the database they happen to be in at the time of the restore.
Example restore statement:
Standby Server -
RESTORE DATABASE databasename FROM database_dd WITH DBO_ONLY, REPLACE, STANDBY = 'g:Mssql7FromPrimaryDatabaseName_undo.ldf'
I could restrict Domain sysadmin access and change sa password. I could also put the database in "Single user" mode, however this could become problem if my process disconnects and then someone else connects - then my process is locked out. What I'm really looking for is to lock out all activity for a database that is in "standby mode" except for RESTORE processes.
Any ideas??
Wade
wadej@vailresorts.com
I'm a newbie so please be gentle.In attempting to run a restore I get the following error message:"Exclusive access could not be obtained because the database is inuse." However, it doesn't appear that there are any connections to thedatabase. At the suggestion of another thread, I ran sp_who2 and thereare no connections to the database in question. I've been running thesame restore for months and all has been well, until yesterday....I wrote an .asp page (below) to test connectivity to this database.The vb code ran successfully and soon thereafter, my nightly restorefailed. Task manager does no show that the asp page is active.Lastly, I did add a user ("jbtest") as well as change the option to useeither Windows authentication or SQL Server authentication inEnterprise Manager.Any ideas would be greatly appreciated.Thanks.<%@ Language=VBScript %><%companyName = "agemni"Set cnn = Server.CreateObject("ADODB.Connection")cnn.ConnectionString = "DRIVER=SQLServer;SERVER=SHEELA-NA-GIG;UID=jbtest;PWD=test1;APP=MicrosoftDevelopment Environment;WSID=SHEELA-NA-GIG;DATABASE=" & companyName &";Trusted_Connection=No"cnn.ConnectionTimeout = 300cnn.CommandTimeout = 300cnn.OpenSet RS = Server.CreateObject("ADODB.Recordset")strSQL = "SELECT * FROM Preferences"RS.Open strSQL, cnnResponse.Write "connection established with the <b>" & RS("CompanyName") & "</b> database. They are a <b>" & RS("street") & "</b>customer. "RS.CloseSet RS = Nothing%>
View 2 Replies View RelatedI did a small package with only one ODBC connection (Merant 3.70 32-Bit Progess). This package runs well in Visual Studio and fails when runs by SQL Server Agent.
Configuration:
SQL Server Agent on a 32Bit server.
The ODBC connection configuration in available on System DSN on this server.
The user of Server Agent have full access (Admin).
Connect Manager Provider: ".Net ProvidersOdbc Data Provider"
SQL Server version: 9.0.3042
Error Message:
Executed as user: TEKCON cadmin. ...ion 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 16:50:33 Error: 2007-06-11 16:50:33.62 Code: 0xC0047062 Source: Data Flow Task DataReader Source [1] Description: System.Data.Odbc.OdbcException: ERROR [HYC00] [MERANT][ODBC PROGRESS driver]Optional feature not implemented. ERROR [HY000] [MERANT][ODBC PROGRESS driver]msgOpen: unable to open message file: PROMSGS ERROR [IM006] [MERANT][ODBC PROGRESS driver]Driver's SQLSetConnectAttr failed. ERROR [HYC00] [MERANT][ODBC PROGRESS driver]Optional feature not implemented. ERROR [HY000] [MERANT][ODBC PROGRESS driver]msgOpen: unable to open message file: PROMSGS ERROR [IM006] [MERANT][ODBC PROGRESS driver]Driver's SQLSetConnectAttr failed. at System.Data.Odbc.OdbcConnection.HandleError(OdbcHandle hrHandle, RetCode retcode) at System.Data.Odbc.OdbcConnectionHandle..ctor(OdbcConnection connection, OdbcCon... The package execution fa... The step failed.
I created a .bat file with this instruction and It's run well:
dtexec /f "C:Program FilesMicrosoft SQL Server90DTSPackagesIntegration Services Project estcom.dtsx"
pause
Why it's not running with SQL Server Agent???
While migrating Report services in SQL Server 2005 to 2014, I am trying to restore the Encryption Key in RS Configuration Manager in2014. But I cannot click the 'Restore' button in RS Configuration Manager. So if I should be grant more right to do so or any other action?
View 2 Replies View RelatedIn Windows Server 2012. How do I do a System Restore to a previous restore point?I need to install the 64 bit and 32 bit Oracle Client Install for connections in SSIS and to create Oracle Linked Servers.
If you make a mistake it is not fun removing it. Sometimes it corrupts the machine and it is difficult to uninstall since there is not an Oracle Universal installer for Oracle 11g.If you install the 32 bit before the 64 you mess up the machine.how to create a restore point.
I am looking for a SQL Backup/Restore tools which can restore multiple environments. Here is high level requirements.
1. We have 4 DBs, range from 1 TB - 1.5 TB Each Database. When we restore to QA, DEV, or Staging, we usually restore 4 of them.
2. I am looking for the speed to complete restoring between 1 - 2 hours for 4 DBs.
I am evaluating the Dephix Software but the setup is very complex and its given us a lot of issues with Windows Authentions, and failure in the middle of the backup. I used Guess Software many years ago but can't find it on the web site any more. Speed is very important for us mean complete restoring as fast as possible. We are on SQL 2012 and SQL 2008 R2.We are currently using NETAPP Technology and I have Redgate Backup Tool but I am mainly looking for fast Restore Process.
Hello,
Would some one please help me with the syntex on how to run "restore filelistonly" or restore verifyonly" on a SQL backup which has multiple filesets?? My backups locations are as follow:
RESTORE VERIFYONLY
From disk = 'E:syndicated_databank__bkup_01.bak',
'E:syndicated_databank__bkup_02.bak',
€˜E:syndicated_databank__bkup_03.bak€™,
€˜E:syndicated_databank__bkup_04.bak€™, €˜E:syndicated_databank__bkup_05.bak€™
I tried to do a restore with the above, I got error The label 'E' has already been declared. Label names must be unique within a query batch or stored procedure.
Please advise!!
I have seen this before. A 2000 restore fails, leaving the database thinking it is being restored but the restore job failed and errors when it is restarted. EM is clueless. I believe there is a proc to reset some flag. Can you share it with me???
Thanks!
We are trying to install the Standard Edition of SQL Server 2005. We already have SQL Express installed. Standard won't install and Express won't uninstall.
We have tried every suggestion we can find and some we made up. When we try to install Standard, we get to the bit where you choose what you want to install and the only thing available is workstation components.
There are so many cases of this on the Internat that I can't believe MS have not solved the issue. And I am stunned that they want to charge us more money to talk to us about how to fix something we just paid them an arm and a leg for!
What do I need to tell you to get some idea of where to go next with this?
I need to restore test DB from production backup but once it is restored I would need all the permissions of sql logins and windows AD account intact in test Db as it was before.
View 4 Replies View RelatedHi,
I have suddenly run into a problem. I have a DTS which was running well till few days ago. Now when ever it runs, it crashes the server, any body
have any idea why???
Thanks in Adv.
Nirmal
Hi all,
Sql server 7
I have created a Web assistant job which select
and displays data from a table (very small amt of data)
on to the webpage. the job is schedule to run
every 1 minute. the job is not running, in job view
history its gives the error msg
"could not open the output file" 16821 Error no.
pls suggest
Awaiting for ur reply
TIA
Adil
I have a DTS job that runs every hour.
it truncates destination table and copies from the source table.
it has failed with the following error in view job history
"error-214721900(80040E14);provider error 14262.(37B6)"
error source Microsoft ole db provider error
pls help in this
how can i solve this, i tried restarting the job but its failing again.
Good Morning,
I've been running into a small problem. There are two people that usually create local packages to be executed by the DTS. Either my boss or I. The problem that I have been running into is, there are some local packages that will not execute when I try to run them. These packages are that my boss has created. When she runs them they work fine. But when I run them they just don't run. The only way I can run the local package is if I log in into the server and run it from there.
The error that I keep getting is:
Unspecified Error
[Microsoft][ODBC Driver Manager] Data Source Name not found and no default driver specified.
What would I be able to do so that I can execute this local package from my computer?
Hey guys,
I'm trying to run a job that will convert a load of data but it keeps failing at the first step. If I run the scripts in each step on their own then they run fine. The error message I get is 'The process did not produce any output. Process exit code 1. The step failed'. I think this may be some kind of security problem but I cannot see where. The command I'm using for the first step is as follows:
OSQL -SCRLONSQL01 -DINPRO -Usysadm -Pcarpmaels -i"C:Program FilesCPA Inpro DatabaseScriptsdropinteg.sql" -o"C:conversionoutputdropinteg.txt" -n
Any pointers would be most helpful.
Hi,
I am trying to create a job to run a ssis package.
The job fails. Looking at the history log, there is no proper information on why the job failed. It just says: The job failed. The job was invoked by user ...
please note that the ssis package runs fine on it's own i.e. in the designer by pressing the run button.
Thanks
I have a package which works fine when i ru if from VS but when i schedule it iam getting an error on one of the data reader source. I am not able to figure it why its giving error when its working fine from VStudio
Message
Executed as user: NAdbasvc-alticor. ... 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:28:25 AM Error: 2007-07-10 11:28:26.21 Code: 0xC020838F Source: Staging LKPDataReader Source [1] Description: An error occurred executing the provided SQL command. End Error Error: 2007-07-10 11:28:26.21 Code: 0xC004706B Source: Staging DTS.Pipeline Description: "component "LKPDataReader Source" (1)" failed validation and returned validation status "VS_ISBROKEN". End Error Error: 2007-07-10 11:28:26.21 Code: 0xC004700C Source: Staging DTS.Pipeline Description: One or more component failed validation. End Error Error: 2007-07-10 11:28:26.21 Code: 0xC0024107 Source: Staging Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 11:28:25 AM Finished: 11:28:26 AM Elapsed: 0.906 seconds. The package execution fai... The step failed.
has anyone come across same issue, help
Hello,
I'm trying to get a handel on ASP.NET and I've put together a new SQL connection to display a view inside of a datagrid.
When I go to run it (before or after compile) I get the error:
------------------------------------------------------------------------------------------------------
Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection
Line 57: Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Line 58: Dim ds As New DataSet
Line 59: SqlDataAdapter1.Fill(ds)
Line 60:
Line 61: DataGrid1.DataSource = ds
Stack Trace:
[SqlException: Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.]
System.Data.SqlClient.ConnectionPool.GetConnection(Boolean& isInTransaction)
System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction)
System.Data.SqlClient.SqlConnection.Open()
System.Data.Common.DbDataAdapter.QuietOpen(IDbConnection connection, ConnectionState& originalState)
System.Data.Common.DbDataAdapter.FillFromCommand(Object data, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet)
jtio8.WebForm1.Page_Load(Object sender, EventArgs e) in c:inetpubwwwrootjtio8WebForm1.aspx.vb:59
System.Web.UI.Control.OnLoad(EventArgs e)
System.Web.UI.Control.LoadRecursive()
System.Web.UI.Page.ProcessRequestMain()
--------------------------------------------------------------------------------
Here is the connection string I am using:
Me.SqlConnection1.ConnectionString = "workstation id=MyWorkstation;packet size=4096;integrated security=SSPI;data source=MyServer;" & _
"persist security info=False;initial catalog=Northwind"
-------------------------------------------------------------------------------
Now, I've created a new login to the SQL server using the ASPNET user id (as well as several others for testing), set up the premissions for each UID and I'm still getting this error.
I have also tried to setup the user info in the connection string by doing the following:
Me.SqlConnection1.ConnectionString = "user id=aspnet;password=;workstation id=MyWorkstation;packet size=4096;integrated security=SSPI;data source=MyServer;" & _
"persist security info=False;initial catalog=Northwind"
Any ideas?
Thanks,
Dale
Hi all;
I am getting the following error when I try to connect to my local SQL server from my ASP.NET application
Server Error in '/pelin' Application.
Cannot open database requested in login 'pelin'. Login fails. Login failed for user 'sa'.
for other users also
my connection string is in web.config file:
<appSettings>
<add key="constr" value="server=ARGE057VSDOTNET2003;UID=sa;pwd=sa;database=Test;"></add>
</appSettings>
can you help me please thanks..