Hi everybody
Our server has crashed and only we can rescue some SqlServer 2000
Backup file with recovery softwares .
Now we want to restore them , but we get this error message :
" Restore Header Is Terminating Abnormally , its not a valid backup"
whereas we sure they are correct backup before crashing .
How can we Solve this problem or Fix this Files for restoring ?
it would be convenient if you could help us .
Could anyone please tell me whether and how I can store the result set from the RESTORE HEADERONLY ?
Thanks
I want to capture the output of the RESTORE HEADERONLY command into a table but so far I've not been smart enough to do it.
I know that I could run it manually then save the output to a file but that's not going to work for me in this case.
I tried using the command along with Insert (just they way I would a select stmt) but SQL didn't appreciate it.
Has anyone done this before? Got any ideas?
Sidney Ives
Database Administrator
Sentara Healthcare
I'm trying to capture the info that gets passed back from the 'load headeronly from logbackup' command in a script that I'm writing. The MS Transact-SQL reference specifies that this info is passed back in a table, a row for each dump on the given dump device. I'm looking for the SQL construct that will allow me to capture this info as variables in my script for processing. I've tried to create a temp table that mirrors the info returned and insert into this table by executing the load command but syntactically it is not correct(with that syntax the compiler assumes that the load command is a stored procedure and can't locate it) Specifically, I'm trying to capture info from the dump transaction with no_truncate command.
It appears the dump info does not go the the msdb..sysbackuphistory table when the no_truncate option is used. This dump info can only be obtained thru the load headeronly command. Any thoughts on how to code the sql to capture this info?
While migrating Report services in SQL Server 2005 to 2014, I am trying to restore the Encryption Key in RS Configuration Manager in2014. But I cannot click the 'Restore' button in RS Configuration Manager. So if I should be grant more right to do so or any other action?
View 2 Replies View RelatedIn Windows Server 2012. How do I do a System Restore to a previous restore point?I need to install the 64 bit and 32 bit Oracle Client Install for connections in SSIS and to create Oracle Linked Servers.
If you make a mistake it is not fun removing it. Sometimes it corrupts the machine and it is difficult to uninstall since there is not an Oracle Universal installer for Oracle 11g.If you install the 32 bit before the 64 you mess up the machine.how to create a restore point.
I am looking for a SQL Backup/Restore tools which can restore multiple environments. Here is high level requirements.
1. We have 4 DBs, range from 1 TB - 1.5 TB Each Database. When we restore to QA, DEV, or Staging, we usually restore 4 of them.
2. I am looking for the speed to complete restoring between 1 - 2 hours for 4 DBs.
I am evaluating the Dephix Software but the setup is very complex and its given us a lot of issues with Windows Authentions, and failure in the middle of the backup. I used Guess Software many years ago but can't find it on the web site any more. Speed is very important for us mean complete restoring as fast as possible. We are on SQL 2012 and SQL 2008 R2.We are currently using NETAPP Technology and I have Redgate Backup Tool but I am mainly looking for fast Restore Process.
Hello,
Would some one please help me with the syntex on how to run "restore filelistonly" or restore verifyonly" on a SQL backup which has multiple filesets?? My backups locations are as follow:
RESTORE VERIFYONLY
From disk = 'E:syndicated_databank__bkup_01.bak',
'E:syndicated_databank__bkup_02.bak',
€˜E:syndicated_databank__bkup_03.bak€™,
€˜E:syndicated_databank__bkup_04.bak€™, €˜E:syndicated_databank__bkup_05.bak€™
I tried to do a restore with the above, I got error The label 'E' has already been declared. Label names must be unique within a query batch or stored procedure.
Please advise!!
I have seen this before. A 2000 restore fails, leaving the database thinking it is being restored but the restore job failed and errors when it is restarted. EM is clueless. I believe there is a proc to reset some flag. Can you share it with me???
Thanks!
I need to restore test DB from production backup but once it is restored I would need all the permissions of sql logins and windows AD account intact in test Db as it was before.
View 4 Replies View Related11/19
Trying to keep out sysadmins & sa during/between database RESTORE
Configuration:
WINNT Server Enterprise 4.0 w/SP5
SQL Server 7 Enterprise & SP1
2 SQL Servers:
Production Server
Standby server
I Backup (full backup) databases to disk on primary server (logical backup devices are physicaly located on a Standby server (dedicated gigabit NIC in each server for this process). Transaction logs are applied to the Standby server throughout the day.
Problem:
How to keep out "sa" and sysadmins from a database while I'm restoring (or between restores) to a standby server?
The database being restored cannot be in use during a restore.
If a DBA forgets that this process is happening, the statement fails (RESTORE)for the database they happen to be in at the time of the restore.
Example restore statement:
Standby Server -
RESTORE DATABASE databasename FROM database_dd WITH DBO_ONLY, REPLACE, STANDBY = 'g:Mssql7FromPrimaryDatabaseName_undo.ldf'
I could restrict Domain sysadmin access and change sa password. I could also put the database in "Single user" mode, however this could become problem if my process disconnects and then someone else connects - then my process is locked out. What I'm really looking for is to lock out all activity for a database that is in "standby mode" except for RESTORE processes.
Any ideas??
Wade
wadej@vailresorts.com
hi all,
i created a database backup in SQLServer2005 by the following option in one server,
Right click on Database -> Tasks -> BackUp -> And i created in one path.
when i trying to restore the this database on another server i'm getting the following error,
Restore failed for Server 'IPDDFZ2066ATL2'. (Microsoft.SqlServer.Smo)
System.Data.SqlClient.SqlError: RESTORE cannot process database 'xeroworld' because it is in use by this session. It is recommended that the master database be used when performing this operation. (Microsoft.SqlServer.Smo)
please help me how to solve this problem,
Thanks!
Hi everyone,I have an sql server running in my company.if one day the sql stop working for some reason and I want to make a restore, what should i do? what is the best scenario.could u help by any reference or article.Thanks.
View 1 Replies View RelatedHi,
I have a SQL 7 database that uses one MDF, two NDF files. I backed up this database and am trying to restore it another database on another server. However this target database is only using one MDF. I assumed it was possible to use the WITH MOVE option and move the two NDF's into this MDF but it doesn't work.
Anyone know how I can achive this?
Thanks,
Sundar.
How can I if possible restore a backup from tape(taken from databaseA)
to databaseB both have the same structure just different names?
Windows NT 4 EE - SQL 7.0 SP1
We use two backup methods:
1: thru SQL Server jobs (Maintenance Plans),
2: thru ARCServe IT (CA).
I think that there are 4 tables ( BackupMediaFamily, backupset,backupfile,backupmediaset)in msdb that are updated everytime a backup is taken.
This happen even with the ARCServe IT backups.
The result is that when I go thru EM to do a restore operation I find a list of all my SQL backups + the ARCServe IT backups in the "general tab" of RESTORE DATABASE of EM.
Suppose I have this situation:
2001/06/11 21:00 full SQL backup (on disk)
2001/06/12 12:00 full ARCServe IT backup (on tape)
2001/06/12 17:00 differential SQL Backup (on disk)
If I want to combine my last differential disk backup with my full SQL disk Backup,there is no way to do it thru EM, because as soon as I choose the differential backup, EM associate this one with the ARCServe IT backup that is taken on tape.
So, I dont need the ARCServe IT informations on my msdb tables. Is there a way to resolve this problem and thererfore eliminate the ARCServe IT informations on msdb tables?
Thank you very much!
Hi,
I restored a DB and while restoring I selected the Optio - "Leave DB non-operational but able to restore additional T-log".
I want to add more T-logs (one every 2 hours)and at the same time I also want this DB to be operational.
Is it possible to add T-log to an operational DB?Is this not log-shiiping is all about?
I have sql2k/win2k.
Any thoughts?
can anyone help me get around the following error I am trying to copy a database from one sql 7 server to another but keep recieving this problem. Is anyone able to give us any advice tips etc. thanks guys!
"The database you are attempting to restore was backed up under a different sort order ID(51) than the one currently running on this server (52), and at least one of them is non binary sort order. Backup or restore operation terminating abnormally."
What is the best to move an entire SQL 7 Server to a newer server.
View 2 Replies View RelatedHi Guys.
I have a huge database (40GB) in production.
Each night i am restoring the database into the
test server. In the test server daily there will
be many changes (creating generic tables to dump all
the values to run report against the common tables).
I overwrite by restoring the complete database.
Instead of this complete restore I like to do something similar to transactional replication.
(Loading the database once in life time and just restore only the
transaction log)
I cant do the tran-replication cas' no tables has primary key and
it is a standard edition.
I tried to run a SP the loads the database and all tran logs.
the database is unusable until all the logs are restored
(no/recovery syntax).
Any ideas?
-MAK
I need to create a test environment and want to restore the master, msdb and user dbs to another server. SQL Server and SQL Exec are using the same domain account which is also a member of the Local Admin group. I am using EM to do the restore. When I select restore, from device, then add file and I add the location of the device to the remote server, I do not get a list of the files from the device in the history listing. The RESTORE NOW button is grayed and I'm logged in as sa. Can I restore a database from a device used by another server? Please HELP!
View 2 Replies View Relatedhow much time it takes to restore 8 gb database
View 3 Replies View RelatedI have a backup database from SQL6.5 version.
IS IT POSSIBLE TO RESTORE sql6.5 backup on SQL7.0?
I don't have access to SQL6.5 Server.
Thanx in advance
Srini
I had did a restore on a database that's about 10GB, I ran sp_who2
to see if the job is still active and it's not but when I try to
go into it I receive: "Msg 927, Level 14, state 2, Database is cannot
be opened. It's in a middle of a restore" The restore has been running
for a day, I had stop and start the service but that did help.
Any ideals why is taking so long once again the size is only 10GB?
I'm trying to run this script file on a one of my SQL Server and it keep says, error at line 3. Can anybody please look at it and advice, what wrong I'm doing.
To tell what i'm trying to achieve is: I'm trying to load this db on one of my test server in a standby mode with the with replace command. Its not working. Any help will be greatly appreciated.
The command:
-------------
RESTORE DATABASE Test FROM DISK = 'd:CUSMS1.DMP'
with replace,
with standby = 'd: est.ldf',
MOVE 'cusmsdbData' TO 'd: est111.MDF',
MOVE 'cusmsdb_log' TO 'd: est11112.LDF'
Can anybody tell me is it possible to restore a database from a cd rom. If so how. We have a dba that swears she did it, but is unable to re-create the process? Thanks for any help
View 2 Replies View RelatedHello,
I need urgent help with restoring a ms sql database. It was backuped ( full backup) from one server. Now i try to restore it on another server( different network). I think i've tried everythin but i can not get it "restored".
Please someone help me.
rgrds
C
I have a back from serverA and tried to restore on ServerB. Here is the Syntax: ( the 'c:ServerA.BAK' is backup from ServerA )
restore database ServerB
from disk = 'c:ServerA.BAK'
with move
'ServerB_Data' to 'C:ServerB_Data.MDF'
,move 'SErverB_Log' to 'C:ServerB_Log.LDF'
When I ran this syntax, I got error " Logical file 'ServerB_Data' is not part of database 'ServerB'. Use RESTORE FILELISTONLY to list the logical file names."
What is correct syntax for this restore?
Thank you in advance.
Recently our team had to reformat our SQL server. We backed everything up but when we reinstalled SQL and restored the databases, the DTS local packages did not restore with it. Does anyone know why this would happen?
TIA
Hi,
How can I restore database that have 2 data files into database that have 1 data file.
I would like the second database to have 1 data file.
Thanks,
Elena.
I am trying to restore a backup from another SQL installation on my local server. I am getting the following error.. any ideas??
The database you are attempting to restore was backed up under a different Unicode locale ID (1033)
or Unicode comparison style (196609) than Unicode ID (1033) or Unicode comparison style
(196608) currently running on this server.
Backup or restore operation terminating abnormally.
thanks
Atul
Hi,
I restored a DB and while restoring I selected the Optio - "Leave DB non-operational but able to restore additional T-log".
I want to add more T-logs (one every 2 hours)and at the same time I also want this DB to be operational.
Is it possible to add T-log to an operational DB?Is this not log-shiiping is all about?
I have sql2k/win2k.
Any thoughts?